run it against sal,cppu,cppuhelper
I had to run this multiple times to catch all the cases in each module,
and it requires some hand-tweaking of the resulting output - clang-tidy
is not very good about cleaning up trailing spaces, and aligning
things nicely.
Change-Id: I00336345f5f036e12422b98d66526509380c497a
Reviewed-on: https://gerrit.libreoffice.org/36194
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
Tested-by: Noel Grandin <noel.grandin@collabora.co.uk>
this modifies codemaker so that, for an UNO enum, we generate code
that effectively looks like:
#ifdef LIBO_INTERNAL_ONLY && HAVE_CX11_CONSTEXPR
enum class XXX {
ONE = 1
};
constexpr auto ONE = XXX_ONE;
#else
...the old normal way..
#endif
which means that for LO internal code, the enums are scoped.
The "constexpr auto" trick acts like an alias so we don't have to
use scoped naming everywhere.
Change-Id: I3054ecb230e8666ce98b4a9cb87b384df5f64fb4
Reviewed-on: https://gerrit.libreoffice.org/34546
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
so we can remove unnecessary calls to the OUString(literal) constructor
when calling constructors like this:
Foo(OUString("xxx"), 1)
Change-Id: I1de60ef561437c86b27dc9cb095a5deb2e103b36
Reviewed-on: https://gerrit.libreoffice.org/33698
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
...(for now, from LIBO_INTERNAL_CODE only). See the mail thread starting at
<https://lists.freedesktop.org/archives/libreoffice/2017-January/076665.html>
"Dynamic Exception Specifications" for details.
Most changes have been done automatically by the rewriting loplugin:dynexcspec
(after enabling the rewriting mode, to be committed shortly). The way it only
removes exception specs from declarations if it also sees a definition, it
identified some dead declarations-w/o-definitions (that have been removed
manually) and some cases where a definition appeared in multiple include files
(which have also been cleaned up manually). There's also been cases of macro
paramters (that were used to abstract over exception specs) that have become
unused now (and been removed).
Furthermore, some code needed to be cleaned up manually
(avmedia/source/quicktime/ and connectivity/source/drivers/kab/), as I had no
configurations available that would actually build that code. Missing @throws
documentation has not been applied in such manual clean-up.
Change-Id: I3408691256c9b0c12bc5332de976743626e13960
Reviewed-on: https://gerrit.libreoffice.org/33574
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
i.e., css::uno::Any function template specializations
Any::has<Any>() const
Any::get(Any const &) const
operator >>=(Any const &, Any &)
operator <<=(Any &, Any const &)
that don't make much sense (the first is always true, the rest can be replaced
with operator =, which additionally supports move semantics). For 3rd-party
compatibility, do this only for LIBO_INTERNAL_ONLY, however.
However, some generic template code did benefit from operator >>= working also
for Any, so make up for that with a new (LIBO_INTERNAL_ONLY, given that
operator >>= still covers if fine for !LIBO_INTERNAL_ONLY) fromAny,
complementing the existing toAny.
Change-Id: I8b1b5f803f0b909808159916366d53c948206a88
Reviewed-on: https://gerrit.libreoffice.org/30022
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
Tested-by: Stephan Bergmann <sbergman@redhat.com>
The issue of 362d4f0cd4e50111edfae9d30c90602c37ed65a2 "Explicitly mark
overriding destructors as 'virtual'" appears to no longer be a problem with
MSVC 2013.
(The little change in the rewriting code of compilerplugins/clang/override.cxx
was necessary to prevent an endless loop when adding "override" to
OOO_DLLPUBLIC_CHARTTOOLS virtual ~CloseableLifeTimeManager();
in chart2/source/inc/LifeTime.hxx, getting stuck in the leading
OOO_DLLPUBLIC_CHARTTOOLS macro. Can't remember what that
isAtEndOfImmediateMacroExpansion thing was originally necessary for, anyway.)
Change-Id: I534c634504d7216b9bb632c2775c04eaf27e927e
uno::Reference is only allowed to used with classes that have a
::static_type member.
So convert all those places to rtl::Reference.
Maybe we need some LIBO_INTERNAL_ONLY constructors on rtl::Reference and
uno::Reference to make this a little smoother?
Change-Id: Icdcb35d71ca40a87b1dc474096776412adbfc7e3
Reviewed-on: https://gerrit.libreoffice.org/25516
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noelgrandin@gmail.com>
The option /Zc:wchar_t- prevented to use wchar_t as a built-in type
according to the C++ standard. In Visual C++ 6.0 and earlier, wchar_t
was not implemented as a built-in type, but was declared in wchar.h as
a typedef for unsigned short. Now, years later after the end of life
this outdated toolchain, there is no reason not to use native type.
The only issue could be the ABI compatibility. But on a quick look at
least, it looks like none of the mangled C++ symbols in the stable URE
interface actually depend on wchar_t.
We forgot to get rid of /Zc:wchar_t- in 5.1. Do that for LibreOffice
5.2, though.
Change-Id: I8d6b380660859efa44c83c830734978d31d756a0
Reviewed-on: https://gerrit.libreoffice.org/22589
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
...in LIBO_INTERNAL_ONLY, __cplusplus, non-MSVC case.
It turns out that sal_Unicode happens to not be mangled into any symbols that
make up the stable URE interface, so (for LIBO_INTERNAL_ONLY, at least) we are
free to replace the typedef to sal_uInt16 with a typedef to any integral type
layout-compatible with that. (sal_Unicode does appear in some symbols in sal's
PRIVATE_textenc.1 section, but that is private between the sal and sal_textenc
libraries, so changing those symbols does not require a change of SONAME.)
C++11 chart16_t is the obvious choice (and will ultimately allow using u"..."
to write literals of type array-of-sal_Unicode). Reportedly, char16_t is
supported since GCC 4.4 and Clang 2.9 but will only be available in MSVC 2015.
For plain C, we continue to use sal_uInt16. We could theoretically use C11
char16_t from <uchar.h>, but at least the Mac OS X 10.11 SDK still does not
offer that C11 header.
For MSVC, we continue to use wchar_t (which is actually unsigned short, due to
/Zc:wchar_t-) for now. Potential options there include dropping /Zc:wchar_t-
and using true wchar_t, or using C++11 char16_t once support for MSVC 2013 is
dropped.
Some code needed to be adapted that was written in a way assuming that
sal_Unicode is unsigned short (which indicates that changing sal_Unicode for
non-LIBO_INTERNAL_ONLY would be an ABI change). OUStringBuffer::append can now
differentiate between being called with sal_Unicode (to append a single
character) and erroneously being called with sal_uInt16 (intending to append a
number's textual representation, for which the sal_Int32 overload must be used
instead). Bugs found are 379fe0409e7973b36210cffa3dd1dfd4032f0ecc "Assume that
this code wants to append a number, not a character" and
dc148335a6a438848325f24c49198fba81043279 "Assume this wants to append the
numerical representation."
The GDB support for pretty-printing of sal_Unicode-related data in
solenv/gdb/libreoffice/sal.py can presumably be simplified now.
Change-Id: I445b3a80e65b7cb004d9e08b38bdc9ee93bc9401
Reviewed-on: https://gerrit.libreoffice.org/20036
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
Tested-by: Stephan Bergmann <sbergman@redhat.com>
This may reduce some degree of dependency on boost.
Done by running a script like:
git grep -l '#include *.boost/scoped_array.hpp.' \
| xargs sed -i -e 's@#include *.boost/scoped_array.hpp.@#include <memory>@'
git grep -l '\(boost::\)\?scoped_array<\([^<>]*\)>' \
| xargs sed -i -e 's/\(boost::\)\?scoped_array<\([^<>]*\)>/std::unique_ptr<\2[]>/'
... and then killing duplicate or unnecessary includes,
while changing manually
m_xOutlineStylesCandidates in xmloff/source/text/txtimp.cxx,
extensions/source/ole/unoconversionutilities.hxx, and
extensions/source/ole/oleobjw.cxx.
Change-Id: I3955ed3ad99b94499a7bd0e6e3a09078771f9bfd
Reviewed-on: https://gerrit.libreoffice.org/16289
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
...mostly done with a rewriting Clang plugin, with just some manual tweaking
necessary to fix poor macro usage.
Change-Id: I71fa20213e86be10de332ece0aa273239df7b61a
...to improve diagnosing misuses of boolean expressions in client code (cf.
compilerplugins/clang/implicitboolconversion.cxx). This change should be
transparent to client code.
Change-Id: Ife614637082036dd17412f247be79233326c4f0b
...does not make sense. Adapted some old-style services accordingly, where the
inherited service had been changed to new-style after the fact.
Change-Id: I5f3e4ddf99160778a319062a6c84f83529ff177b
Done with a perl regex:
s/OUString\s*\(\s*RTL_CONSTASCII_USTRINGPARAM\s*\((\s*"[^")]*?"\s*)\)\s*\)/OUString\($1\)/gms
Change-Id: Idf28320817cdcbea6d0f7ec06a9bf51bd2c3b3ec
Reviewed-on: https://gerrit.libreoffice.org/2832
Reviewed-by: Thomas Arnhold <thomas@arnhold.org>
Tested-by: Thomas Arnhold <thomas@arnhold.org>
This changes all generated API headers (.hpp and .hdl) to use a
namespace alias 'css' instead of the pointlessly long com::sun::star
Makes the change in cppumaker & associated tools, adds a global
namespace alias definition in sal/types.h, and removes a kiloton
of local, now pointless-to-harmful versions of that alias from all
over the code.
Change-Id: Ice5a644a6b971a981f01dc0589d48f5add31cc0f
the intent of this header has canged over time. now it is already
systematically included with ustring.hxx and the operator overload it
provide fit nicely there...
Just to be safe, since that include as been added to the api during the
3.5 timeframe and therefore is already in 'production'
the header remain and simply attempt to include ustring.hxx
but a warning is issued indicating that this header should not be used
anymore... in a couple of major release we will thenr emove it completely
All internal users of that header are converted.
Change-Id: I8934c55f089e29d78c0f5649b7c87b2ecf024bad
Reviewed-on: https://gerrit.libreoffice.org/634
Tested-by: Norbert Thiebaud <nthiebaud@gmail.com>
Reviewed-by: Norbert Thiebaud <nthiebaud@gmail.com>
Evidently on Windows, the newfangled ucpp handles #include "foo"
differently from #include <foo> and treats it as a relative path, while
the angle brackets always result in absolute paths.
Since relative paths result in infinite rebuilds if make is invoked in a
different directory, don't use #include "foo" in IDL files.
Change-Id: Iedcda3a4be5542389a0be086f14541cda8dc5323
http://lists.freedesktop.org/archives/libreoffice/2012-April/029940.html
The RTL_USING #define (set by gbuild for anything that's not public
API) allows to use such classes simply by their name, without having
to use the namespace or do explicit using rtl::OUString (which half
of the sources do anyway).
Change-Id: I7edaf12cd278489cdc1d5ff782f0a86361c13c0a
