Refactor TaggableLogger
Refactor status handling in agent task:
Unify log format in TaskWorkerPool
Pass Status to the top caller, and replace some OLAPInternalError with more detailed error message Status
Premature return with the opposite condition to reduce indention
During load process, the same operation are performed on all replicas such as sort and aggregation,
which are resource-intensive.
Concurrent data load would consume much CPU and memory resources.
It's better to perform write process (writing data into MemTable and then data flush) on single replica
and synchronize data files to other replicas before transaction finished.
This PR supports rowset level data upload on the BE side, so that there can be both cold data and hot data in a tablet,
and there is no necessary to prohibit loading new data to cooled tablets.
Each rowset is bound to a `FileSystem`, so that the storage layer can read and write rowsets without
perceiving the underlying filesystem.
The abstracted `RemoteFileSystem` can try local caching strategies with different granularity,
instead of caching segment files as before.
To avoid conflicts with the code in be/src/io, we temporarily put the file system related code in the be/src/io/fs directory.
In the future, `FileReader`s and `FileWriter`s should be unified.
1. Provide a FE conf to test the reliability in single replica case when tablet scheduling are frequent.
2. According to #6063, almost apply this fix on current code.
Currently, there are 2 status code in BE, one is common/Status.h,
and the other is olap/olap_define.h called OLAPStatus.
OLAPStatus is just an enum type, it is very simple and could not save many informations,
I will unify these code to common/Status.
1. solved the previous delayed unit test file size is too large (1.7G+) and the unit test link time is too long problem problems
2. Unify all unit tests into one file to significantly reduce unit test execution time to less than 3 mins
3. temporarily disable stream_load_test.cpp, metrics_action_test.cpp, load_channel_mgr_test.cpp because it will re-implement part of the code and affect other tests
Early Design Documentation: https://shimo.im/docs/DT6JXDRkdTvdyV3G
Implement a new way of memory statistics based on TCMalloc New/Delete Hook,
MemTracker and TLS, and it is expected that all memory new/delete/malloc/free
of the BE process can be counted.
Currently, if we encounter a problem with a replica of a tablet during the load process,
such as a write error, rpc error, -235, etc., it will cause the entire load job to fail,
which results in a significant reduction in Doris' fault tolerance.
This PR mainly changes:
1. refined the judgment of failed replicas in the load process, so that the failure of a few replicas will not affect the normal completion of the load job.
2. fix a bug introduced from #7754 that may cause BE coredump
We make all MemTrackers shared, in order to show MemTracker real-time consumptions on the web.
As follows:
1. nearly all MemTracker raw ptr -> shared_ptr
2. Use CreateTracker() to create new MemTracker(in order to add itself to its parent)
3. RowBatch & MemPool still use raw ptrs of MemTracker, it's easy to ensure RowBatch & MemPool destructor exec
before MemTracker's destructor. So we don't change these code.
4. MemTracker can use RuntimeProfile's counter to calc consumption. So RuntimeProfile's counter need to be shared
too. We add a shared counter pool to store the shared counter, don't change other counters of RuntimeProfile.
Note that, this PR doesn't change the MemTracker tree structure. So there still have some orphan trackers, e.g. RowBlockV2's MemTracker. If you find some shared MemTrackers are little memory consumption & too time-consuming, you could make them be the orphan, then it's fine to use the raw ptr.
StorageEngine::open just return a very vague status info when failed,
we have to check logs to find out the root reason, and it's not
convenient to check logs if we run unit tests in CI dockers.
It would be better to return more detailed failure info to point out
the root reason, for example, it may return error status with message
"file descriptors limit is too small".
Fix some unittest failed due to glog， this may be we change the ut build dir，and the log path is not exist in new build dir， so we change the log from file to stdout
We can observe the workload of BE, and also it's a way to check
whether there is any problem in BE, like some container increase
too large and lead to OOM.
This patch add the following metrics:
```
Name Description
rowset_count_generated_and_in_use The total count of rowset id generated and in use since BE last start
unused_rowsets_count The total count of unused rowset waiting to be GC
broker_count The total count of brokers in management
data_stream_receiver_count The total count of data stream receivers in management
fragment_endpoint_count The total count of fragment endpoints of data stream in management, should always equal to data_stream_receiver_count
active_scan_context_count The total count of active scan contexts
plan_fragment_count The total count of plan fragments in executing
load_channel_count The total count of load channels in management
result_buffer_block_count The total count of result buffer blocks for queries, each block has a limited queue size (default 1024)
result_block_queue_count The total count of queues for fragments, each queue has a limited size (default 20, by config::max_memory_sink_batch_count)
routine_load_task_count The total count of routine load tasks in executing
small_file_cache_count The total count of cached small files' digest info
stream_load_pipe_count The total count of stream load pipes, each pipe has a limited buffer size (default 1M)
tablet_writer_count The total count of tablet writers
brpc_endpoint_stub_count The total count of brpc endpoints
```
For a tablet, there may be multiple memtables, which will be
flushed to disk one by one in the order of generation.
If a memtable flush fails, then the load job will definitely
fail, but the previous implementation will overwrite `_flush_status`,
which may make the error can not be detected, leads to an error
load job to be success.
This patch also have two other changes:
1. Use `std::bind` to replace `boost::bind`;
2. Removes some unneeded headers.
After replacing Arena with MemPool, we can achieve one copy for string
value read from segment v2. We can exchange MemPool's chunk between
RowBlockV2 and RowBlock. This change only replace Arena, this work will
be done in other change list.
The current load process is:
Tablet Sink -> Tablet Channel Mgr -> Tablets Channel -> Delta Writer -> MemTable -> Flush to disk
In the path of Tablets Channel -> DeltaWriter -> MemTable -> Flush to disk, the following operations are performed:
Insert tuple into different memtables according to tablet ID
When the memtable size reaches the threshold, it is written to disk.
The above operations are equivalent to single thread execution for a single load task.
In fact, the insertion of memtable and the flush of memtable can be executed synchronously.
Perform these operation in single thread prevents the insertion of memtable from being delayed due to slow disk writing.
In the new implementation, I added a MemTableFlushExecutor class with a set of flush queues and corresponding worker threads.
By default, each data directory uses two worker threads for flush, which can be modified by the parameter flush_thread_num_per_store of BE.
DeltaWriter will push the full memtable to MemTableFlushExecutor for flush operation and generate a new memtable for receiving new data.
This design can improve the performance of load large files.
In single host testing, the time to load a 1GB text file is reduced from 48 seconds to 29 seconds.
NOTE: This patch would modify all Backend's data.
And this will cause a very long time to restart be.
So if you want to interferer your product environment,
you should upgrade backend one by one.
1. Refactoring be is to clarify the structure the codes.
2. Use unique id to indicate a rowset.
Nameing rowset with tablet_id and version will lead to
many conflicts among compaction, clone, restore.
3. Extract an rowset interface to encapsulate rowsets
with different format.
* Add streaming load feature. You can execute 'help stream load;' to see more information.
Changed:
* Loading phase of a certain table can be parallelized, to reduce the load job execution time when multi load jobs to a single table.
* Using RocksDB to save the header info of tablets in Backends, to reduce the IO operations and increate speeding of restarting.
Fixed:
* A lot of bugs fixed.
