count_by_enum(expr1, expr2, ... , exprN);
Treats the data in a column as an enumeration and counts the number of values in each enumeration. Returns the number of enumerated values for each column, and the number of non-null values versus the number of null values.
Currently, there are some useless includes in the codebase. We can use a tool named include-what-you-use to optimize these includes. By using a strict include-what-you-use policy, we can get lots of benefits from it.
Currently, there are some useless includes in the codebase. We can use a tool named include-what-you-use to optimize these includes. By using a strict include-what-you-use policy, we can get lots of benefits from it.
Arena can replace MemPool in most scenarios. Except for memory reuse, MemPool supports reuse of previous memory chunks after clear, but Arena does not.
Some comparisons between MemPool and Arena:
1. Expansion
Arena is less than 128M index 2 alloc chunk; more than 128M memory, allocate 128M * n > `size`, n is equal to the minimum value that satisfies the expression;
MemPool less than 512K index 2 alloc chunk, greater than 512K memory, separately apply for a `size` length chunk
After Arena applied for a chunk larger than 128M last time, the minimum chunk applied for after that is 128M. Does this seem to be a waste of memory? MemPool is also similar. After the chunk of 512K was applied for last time, the minimum chunk of subsequent applications is 512K.
2. Alignment
MemPool defaults to 16 alignment, because memtable and other places that use int128 require 16 alignment;
Arena has no default alignment;
3. Memory reuse
Arena only supports `rollback`, which reuses the memory of the current chunk, usually the memory requested last time.
MemPool supports clear(), all chunks can be reused; or call ReturnPartialAllocation() to roll back the last requested memory; if the last chunk has no memory, search for the most free chunk for allocation
4. Realloc
Arena supports realloc contiguous memory; it also supports realloc contiguous memory from any position at the time of the last allocation. The difference between `alloc_continue` and `realloc` is:
1. Alloc_continue does not need to specify the old size, but the default old size = head->pos - range_start
2. alloc_continue supports expansion from range_start when additional_bytes is between head and pos, which is equivalent to reusing a part of memory, while realloc completely allocates a new memory
MemPool does not support realloc, but supports transferring or absorbing chunks between two MemPools
5. check mem limit
MemPool checks the mem limit, and Arena checks at the Allocator layer.
6. Support for ASAN
Arena does something extra
7. Error handling
MemPool supports returning the error message of application failure directly through `Status`, and Arena throws Exception.
Tests that Arena can consider
1. After the last applied chunk is larger than 128M, the minimum applied chunk is 128M, which seems to waste memory;
2. Support clear, memory multiplexing;
3. Increase the large list, alloc the memory larger than 128M, and the size is equal to `size`, so as to avoid the current chunk not being fully used, which is wasteful.
4. In some cases, it may be possible to allocate backwards to find chunks t
1. Fixed a problem with histogram statistics collection parameters.
2. Solved the problem that it takes a long time to collect histogram statistics.
TODO: Optimize histogram statistics sampling method and make the sampling parameters effective.
The problem is that the histogram function works as expected in the single-node test, but doesn't work in the multi-node test. In addition, the performance of the current support sampling to collect histogram is low, resulting in a large time consumption when collecting histogram information.
Fixed the parameter issue and temporarily removed support for sampling to speed up the collection of histogram statistics.
Will next support sampling to collect histogram information.
This pr mainly to optimize the histogram(👉🏻https://github.com/apache/doris/pull/14910) aggregation function. Including the following:
1. Support input parameters `sample_rate` and `max_bucket_num`
2. Add UT and regression test
3. Add documentation
4. Optimize function implementation logic
Parameter description：
- `sample_rate`：Optional. The proportion of sample data used to generate the histogram. The default is 0.2.
- `max_bucket_num`：Optional. Limit the number of histogram buckets. The default value is 128.
---
Example：
```
MySQL [test]> SELECT histogram(c_float) FROM histogram_test;
+-------------------------------------------------------------------------------------------------------------------------------------+
| histogram(`c_float`) |
+-------------------------------------------------------------------------------------------------------------------------------------+
| {"sample_rate":0.2,"max_bucket_num":128,"bucket_num":3,"buckets":[{"lower":"0.1","upper":"0.1","count":1,"pre_sum":0,"ndv":1},...]} |
+-------------------------------------------------------------------------------------------------------------------------------------+
MySQL [test]> SELECT histogram(c_string, 0.5, 2) FROM histogram_test;
+-------------------------------------------------------------------------------------------------------------------------------------+
| histogram(`c_string`) |
+-------------------------------------------------------------------------------------------------------------------------------------+
| {"sample_rate":0.5,"max_bucket_num":2,"bucket_num":2,"buckets":[{"lower":"str1","upper":"str7","count":4,"pre_sum":0,"ndv":3},...]} |
+-------------------------------------------------------------------------------------------------------------------------------------+
```
Query result description：
```
{
"sample_rate": 0.2,
"max_bucket_num": 128,
"bucket_num": 3,
"buckets": [
{
"lower": "0.1",
"upper": "0.2",
"count": 2,
"pre_sum": 0,
"ndv": 2
},
{
"lower": "0.8",
"upper": "0.9",
"count": 2,
"pre_sum": 2,
"ndv": 2
},
{
"lower": "1.0",
"upper": "1.0",
"count": 2,
"pre_sum": 4,
"ndv": 1
}
]
}
```
Field description：
- sample_rate：Rate of sampling
- max_bucket_num：Limit the maximum number of buckets
- bucket_num：The actual number of buckets
- buckets：All buckets
- lower：Upper bound of the bucket
- upper：Lower bound of the bucket
- count：The number of elements contained in the bucket
- pre_sum：The total number of elements in the front bucket
- ndv：The number of different values in the bucket
> Total number of histogram elements = number of elements in the last bucket(count) + total number of elements in the previous bucket(pre_sum).
**Histogram statistics**
Currently doris collects statistics, but no histogram data, and by default the optimizer assumes that the different values of the columns are evenly distributed. This calculation can be problematic when the data distribution is skewed. So this pr implements the collection of histogram statistics.
For columns containing data skew columns (columns with unevenly distributed data in the column), histogram statistics enable the optimizer to generate more accurate estimates of cardinality for filtering or join predicates involving these columns, resulting in a more precise execution plan.
The optimization of the execution plan by histogram is mainly in two aspects: the selection of where condition and the selection of join order. The selection principle of the where condition is relatively simple: the histogram is used to calculate the selection rate of each predicate, and the filter with higher selection rate is preferred.
The selection of join order is based on the estimation of the number of rows in the join result. In the case of uneven data distribution in the join condition columns, histogram can greatly improve the accuracy of the prediction of the number of rows in the join result. At the same time, if the number of rows of a bucket in one of the columns is 0, you can mark it and directly skip the bucket in the subsequent join process to improve efficiency.
---
Histogram statistics are mainly collected by the histogram aggregation function, which is used as follows:
**Syntax**
```SQL
histogram(expr)
```
> The histogram function is used to describe the distribution of the data. It uses an "equal height" bucking strategy, and divides the data into buckets according to the value of the data. It describes each bucket with some simple data, such as the number of values that fall in the bucket. It is mainly used by the optimizer to estimate the range query.
**example**
```
MySQL [test]> select histogram(login_time) from dev_table;
+------------------------------------------------------------------------------------------------------------------------------+
| histogram(`login_time`) |
+------------------------------------------------------------------------------------------------------------------------------+
| {"bucket_size":5,"buckets":[{"lower":"2022-09-21 17:30:29","upper":"2022-09-21 22:30:29","count":9,"pre_sum":0,"ndv":1},...]}|
+------------------------------------------------------------------------------------------------------------------------------+
```
**description**
```JSON
{
"bucket_size": 5,
"buckets": [
{
"lower": "2022-09-21 17:30:29",
"upper": "2022-09-21 22:30:29",
"count": 9,
"pre_sum": 0,
"ndv": 1
},
{
"lower": "2022-09-22 17:30:29",
"upper": "2022-09-22 22:30:29",
"count": 10,
"pre_sum": 9,
"ndv": 1
},
{
"lower": "2022-09-23 17:30:29",
"upper": "2022-09-23 22:30:29",
"count": 9,
"pre_sum": 19,
"ndv": 1
},
{
"lower": "2022-09-24 17:30:29",
"upper": "2022-09-24 22:30:29",
"count": 9,
"pre_sum": 28,
"ndv": 1
},
{
"lower": "2022-09-25 17:30:29",
"upper": "2022-09-25 22:30:29",
"count": 9,
"pre_sum": 37,
"ndv": 1
}
]
}
```
TODO:
- histogram func supports parameter and sample statistics (It's got another pr)
- use histogram statistics
- add p0 regression
add codes for collect_list and collect_set and update regression output, before output format for ARRAY(string) already changed.
Co-authored-by: cambyzju <zhuxiaoli01@baidu.com>
1. solved the previous delayed unit test file size is too large (1.7G+) and the unit test link time is too long problem problems
2. Unify all unit tests into one file to significantly reduce unit test execution time to less than 3 mins
3. temporarily disable stream_load_test.cpp, metrics_action_test.cpp, load_channel_mgr_test.cpp because it will re-implement part of the code and affect other tests
# Proposed changes
Issue Number: close#6238
Co-authored-by: HappenLee <happenlee@hotmail.com>
Co-authored-by: stdpain <34912776+stdpain@users.noreply.github.com>
Co-authored-by: Zhengguo Yang <yangzhgg@gmail.com>
Co-authored-by: wangbo <506340561@qq.com>
Co-authored-by: emmymiao87 <522274284@qq.com>
Co-authored-by: Pxl <952130278@qq.com>
Co-authored-by: zhangstar333 <87313068+zhangstar333@users.noreply.github.com>
Co-authored-by: thinker <zchw100@qq.com>
Co-authored-by: Zeno Yang <1521564989@qq.com>
Co-authored-by: Wang Shuo <wangshuo128@gmail.com>
Co-authored-by: zhoubintao <35688959+zbtzbtzbt@users.noreply.github.com>
Co-authored-by: Gabriel <gabrielleebuaa@gmail.com>
Co-authored-by: xinghuayu007 <1450306854@qq.com>
Co-authored-by: weizuo93 <weizuo@apache.org>
Co-authored-by: yiguolei <guoleiyi@tencent.com>
Co-authored-by: anneji-dev <85534151+anneji-dev@users.noreply.github.com>
Co-authored-by: awakeljw <993007281@qq.com>
Co-authored-by: taberylyang <95272637+taberylyang@users.noreply.github.com>
Co-authored-by: Cui Kaifeng <48012748+azurenake@users.noreply.github.com>
## Problem Summary:
### 1. Some code from clickhouse
**ClickHouse is an excellent implementation of the vectorized execution engine database,
so here we have referenced and learned a lot from its excellent implementation in terms of
data structure and function implementation.
We are based on ClickHouse v19.16.2.2 and would like to thank the ClickHouse community and developers.**
The following comment has been added to the code from Clickhouse, eg:
// This file is copied from
// https://github.com/ClickHouse/ClickHouse/blob/master/src/Interpreters/AggregationCommon.h
// and modified by Doris
### 2. Support exec node and query:
* vaggregation_node
* vanalytic_eval_node
* vassert_num_rows_node
* vblocking_join_node
* vcross_join_node
* vempty_set_node
* ves_http_scan_node
* vexcept_node
* vexchange_node
* vintersect_node
* vmysql_scan_node
* vodbc_scan_node
* volap_scan_node
* vrepeat_node
* vschema_scan_node
* vselect_node
* vset_operation_node
* vsort_node
* vunion_node
* vhash_join_node
You can run exec engine of SSB/TPCH and 70% TPCDS stand query test set.
### 3. Data Model
Vec Exec Engine Support **Dup/Agg/Unq** table, Support Block Reader Vectorized.
Segment Vec is working in process.
### 4. How to use
1. Set the environment variable `set enable_vectorized_engine = true; `(required)
2. Set the environment variable `set batch_size = 4096; ` (recommended)
### 5. Some diff from origin exec engine
https://github.com/doris-vectorized/doris-vectorized/issues/294
## Checklist(Required)
1. Does it affect the original behavior: (No)
2. Has unit tests been added: (Yes)
3. Has document been added or modified: (No)
4. Does it need to update dependencies: (No)
5. Are there any changes that cannot be rolled back: (Yes)
