VScanNode::get_next will check whether the ScanNode has reached limit condition, and send eos to TaskScheduler, and TaskScheduler will try to close ScanNode.
However, ScanNode must wait all running scanners finished, so even if ScanNode has reached limit condition, it can't be closed immediately.
This PR try to interrupt the running readers, and make ScanNode to end as soon as possible.
1. max compute partition prune,
we just support filter mc partitions by '='，it can filter just one partition
to support multiple partition filter and range operator('>','<', '>='..), the partition prune should be supported.
2. add max compute row count cache and partitionValues cache
3. add max compute regression case
Fix two bugs:
1. Missing column is case sensitive, change the column name to lower case in FE for hive/iceberg/hudi
2. Iceberg use custom method to encode special characters in column name. Decode the column name to match the right column in parquet reader.
`VFileScanner` will try to append late arrival runtime filters in each loop of `ScannerScheduler::_scanner_scan`. However, `VFileScanner::_get_next_reader` only generates the `_push_down_conjuncts` in the first loop, so the late arrival runtime filters are ignored.
1.Reconstruct the logic of decode to read parquet. The parquet reader first reads the data according to the parquet physical type, and then performs a type conversion.
2.Support hive alter table.
When executing broker load in ASAN mode, BE may crash with error:
```
F20231010 18:18:17.044978 185490 block.cpp:694] Check failed: d.column->use_count() == 1 (3 vs. 1)
*** Check failure stack trace: ***
@ 0x55e9d94c4e46 google::LogMessage::SendToLog()
@ 0x55e9d94c1410 google::LogMessage::Flush()
@ 0x55e9d94c5689 google::LogMessageFatal::~LogMessageFatal()
@ 0x55e9c509f80d doris::vectorized::Block::clear_column_data()
@ 0x55e9b6c170b3 doris::PlanFragmentExecutor::get_vectorized_internal()
@ 0x55e9b6c147e6 doris::PlanFragmentExecutor::open_vectorized_internal()
@ 0x55e9b6c12d9a doris::PlanFragmentExecutor::open()
@ 0x55e9b6c18426 doris::PlanFragmentExecutor::execute()
@ 0x55e9b6945cca doris::FragmentMgr::_exec_actual()
@ 0x55e9b696456c doris::FragmentMgr::exec_plan_fragment()::$_0::operator()()
```
It may happen when there is column maping like:
```
(k1,v2,v3,v4,v5,v6,v7,v8)
set (k2=v4,k3=v4,k4=v4)
```
in load stmt.
Case is covered by Baidu test cases
1. do not split compress data file
Some data file in hive is compressed with gzip, deflate, etc.
These kinds of file can not be splitted.
2. Support lz4 block codec
for hive scan node, use lz4 block codec instead of lz4 frame codec
4. Support snappy block codec
For hadoop snappy
5. Optimize the `count(*)` query of csv file
For query like `select count(*) from tbl`, only need to split the line, no need to split the column.
Need to pick to branch-2.0 after this PR: #22304
Iceberg has its own metadata information, which includes count statistics for table data. If the table does not contain equli'ty delete, we can get the count data of the current table directly from the count statistics.
This pr fixes two issues:
1. when using s3 TVF to query files in AVRO format, due to the change of `TFileType`, the originally queried `FILE_S3 ` becomes `FILE_LOCAL`, causing the query failed.
2. currently, both parameters `s3.virtual.key` and `s3.virtual.bucket` are removed. A new `S3Utils` in jni-avro to parse the bucket and key of s3.
The purpose of doing this operation is mainly to unify the parameters of s3.
Truncate char or varchar columns if size is smaller than file columns or not found in the file column schema by session var `truncate_char_or_varchar_columns`.
For load request, there are 2 tuples on scan node, input tuple and output tuple.
The input tuple is for reading file, and it will be converted to output tuple based on user specified column mappings.
And the broker load support different column mapping in different data description to same table(or partition).
So for each scanner, the output tuples are same but the input tuple can be different.
The previous implements save the input tuple in scan node level, causing different scanner using same input tuple,
which is incorrect.
This PR remove the input tuple from scan node and save them in each scanners.
Check whether there are complex types in parquet/orc reader in broker/stream load. Broker/stream load will cast any type as string type, and complex types will be casted wrong. This is a temporary method, and will be replaced by tvf.
Optimization "select count(*) from table" stmtement , push down "count" type to BE.
support file type : parquet ，orc in hive .
1. 4kfiles , 60kwline num
before: 1 min 37.70 sec
after: 50.18 sec
2. 50files , 60kwline num
before: 1.12 sec
after: 0.82 sec
### Issue
when partition has null partitions, it throws error
`Failed to fill partition column: t_int=null`
### Resolution
- Fix the following null partitions error in iceberg tables by replacing null partition to '\N'.
- Add regression test for hive null partition.
### 1
In previous implementation, for each FileSplit, there will be a `TFileScanRange`, and each `TFileScanRange`
contains a list of `TFileRangeDesc` and a `TFileScanRangeParams`.
So if there are thousands of FileSplit, there will be thousands of `TFileScanRange`, which cause the thrift
data send to BE too large, resulting in:
1. the rpc of sending fragment may fail due to timeout
2. FE will OOM
For a certain query request, the `TFileScanRangeParams` is the common part and is same of all `TFileScanRange`.
So I move this to the `TExecPlanFragmentParams`.
After that, for each FileSplit, there is only a list of `TFileRangeDesc`.
In my test, to query a hive table with 100000 partitions, the size of thrift data reduced from 151MB to 15MB,
and the above 2 issues are gone.
### 2
Support when setting `max_external_file_meta_cache_num` <=0, the file meta cache for parquet footer will
not be used.
Because I found that for some wide table, the footer is too large(1MB after compact, and much more after
deserialized to thrift), it will consuming too much memory of BE when there are many files.
This will be optimized later, here I just support to disable this cache.
Two optimizations:
1. Insert string bytes directly to remove decoding&encoding process.
2. Use native reader to read the hudi base file if it has no log file. Use `explain` to show how many splits are read natively.
1. Add hdfs file handle cache for hdfs file reader
Copied from Impala, `https://github.com/apache/impala/blob/master/be/src/util/lru-multi-cache.h`. (Thanks for the Impala team)
This is a lru cache that can store multi entries with same key.
The key is build with {file name + modification time}
The value is the hdfsFile pointer that point to a certain hdfs file.
This cache is to avoid reopen same hdfs file mutli time, which can save
query time.
Add a BE config `max_hdfs_file_handle_cache_num` to limit the max number
of file handle cache, default is 20000.
2. Add file meta cache
The file meta cache is a lru cache. the key is {file name + modification time},
the value is the parsed file meta info of the certain file, which can save
the time of re-parsing file meta everytime.
Currently, it is only used for caching parquet file footer.
The test show that is cache is hit, the `FileOpenTime` and `ParseFooterTime` is reduce to almost 0
in query profile, which can save time when there are lots of files to read.
After supporting insert-only transactional hive full acid tables #19518, #19419, this PR support transactional hive full acid tables.
Support hive3 transactional hive full acid tables.
Hive2 transactional hive full acid tables need to run major compactions.
PR(https://github.com/apache/doris/pull/19909) has implemented the framework of hudi reader for MOR table. This PR completes all functions of reading MOR table and enables end-to-end queries.
Key Implementations:
1. Use hudi meta information to generate the table schema, not from hive client.
2. Use hive client to list hudi partitions, so it strongly depends the sync-tools(https://hudi.apache.org/docs/syncing_metastore/) which syncs the partitions of hudi into hive metastore. However, we may get the hudi partitions directly from .hoodie directory.
3. Remove `HudiHMSExternalCatalog`, because other catalogs like glue is compatible with hive catalog.
4. Read the COW table originally from c++.
5. Hudi RecordReader will use ProcessBuilder to start a hotspot debugger process, which may be stuck when attaching the origin JNI process, soI use a tricky method to kill this useless process.
Use consistent hash to collect BE only when the file cache is enabled. And move the consistent BE assign code to FederationBackendPolicy.
Fix explain split number and file size incorrect bug.
1. Fix create catalog with resource replay bug.
If user create catalog using `create catalog hive with resource xxx`, when replaying edit log,
there is a bug that resource may be dropped, causing NPE and FE will fail to start.
In this PR, I add a new FE config `disallow_create_catalog_with_resource`, default is true.
So that `with resource` will not be allowed, and it will be deprecated later.
And also fix the replay bug to avoid NPE.
2. Fix issue when creating 2 hive catalogs to connect with and without kerberos authentication.
When user create 2 hive catalogs, one use simple auth, the other use kerberos auth.
The query may fail with error like: `Server asks us to fall back to SIMPLE auth, but this client is configured to only allow secure connections.`
So I add a default property for hive catalog: `"ipc.client.fallback-to-simple-auth-allowed" = "true"`.
Which means this property will be added automatically when user creating hive catalog, to avoid such problem.
3. Fix calling `hdfsExists()` issue
When calling `hdfsExists()` with non-zero return code, should check if it encounters error or is file not found.
3. Some code refactor
Avoid import `org.apache.parquet.Strings`
Refactoring the filtering conditions in the current ExecNode from an expression tree to an array can simplify the process of adding runtime filters. It eliminates the need for complex merge operations and removes the requirement for the frontend to combine expressions into a single entity.
By representing the filtering conditions as an array, each condition can be treated individually, making it easier to add runtime filters without the need for complex merging logic. The array can store the individual conditions, and the runtime filter logic can iterate through the array to apply the filters as needed.
This refactoring simplifies the codebase, improves readability, and reduces the complexity associated with handling filtering conditions and adding runtime filters. It separates the conditions into discrete entities, enabling more straightforward manipulation and management within the execution node.
- Implements ORC lazy materialization, integrate with the implementation of https://github.com/apache/doris-thirdparty/pull/56 and https://github.com/apache/doris-thirdparty/pull/62.
- Refactor code: Move `execute_conjuncts()` and `execute_conjuncts_and_filter_block()` in `parquet_group_reader `to `VExprContext`, used by parquet reader and orc reader.
- Add session variables `enable_parquet_lazy_materialization` and `enable_orc_lazy_materialization` to control whether enable lazy materialization.
- Modify `build.sh` to update apache-orc submodule or download package every time.
