# INFO, WARNING, ERROR, FATAL
sys_log_level = INFO

# ports for admin, web, heartbeat service 
be_port = 9060
be_rpc_port = 9070
webserver_port = 8040
heartbeat_service_port = 9050
brpc_port = 8060

# Choose one if there are more than one ip except loopback address. 
# Note that there should at most one ip match this list.
# If no ip match this rule, will choose one randomly.
# use CIDR format, e.g. 10.10.10.0/24
# Default value is empty.
# priority_networks = 10.10.10.0/24;192.168.0.0/16

# data root path, separate by ';'
# you can specify the storage medium of each root path, HDD or SSD
# you can add capacity limit at the end of each root path, seperate by ','
# eg:
# storage_root_path = /home/disk1/palo.HDD,50;/home/disk2/palo.SSD,1;/home/disk2/palo
# /home/disk1/palo.HDD, capacity limit is 50GB, HDD;
# /home/disk2/palo.SSD, capacity limit is 1GB, SSD;
# /home/disk2/palo, capacity limit is disk capacity, HDD(default)
storage_root_path = /home/disk1/palo;/home/disk2/palo

# Advanced configurations
# sys_log_dir = ${DORIS_HOME}/log
# sys_log_roll_mode = SIZE-MB-1024
# sys_log_roll_num = 10
# sys_log_verbose_modules =
# log_buffer_level = -1
# palo_cgroups