These controller tests are passing locally and in CI, but are failing the build when run in parallel.
I managed to recreate the failures by running the entire suite with turbo_spec and the right seed locally. After these changes, the parallel suite passes locally as well. 🤞
When staff only mode is enabled - Discourse.enable_readonly_mode(Discourse::STAFF_WRITES_ONLY_MODE_KEY)
Staff members couldn't reset their password via the "forgot password" link.
This fixes it.
Internal ref. t/133990
* Add migrations to ensure password hash is synced across users & user_passwords
* Persist password-related data in user_passwords instead of users
* Merge User#expire_old_email_tokens with User#expire_tokens_if_password_changed
* Add post deploy migration to mark password-related columns from users table as read-only
* Refactored UserPassword#confirm_password? and changes required to accommodate hashing the password after validations
There have been too many flaky tests as a result of leaking state in
Redis so it is easier to resolve them by ensuring we flush Redis'
database.
Locally on my machine, calling `Discourse.redis.flushdb` takes around
0.1ms which means this change will have very little impact on test
runtimes.
Previously in these 2 PRs, we introduced a new site setting `SiteSetting.enforce_second_factor_on_external_auth`.
https://github.com/discourse/discourse/pull/27547https://github.com/discourse/discourse/pull/27674
When disabled, it should enforce 2FA for local login with username and password and skip the requirement when authenticating with oauth2.
We stored information about the login method in a secure session but it is not reliable. Therefore, information about the login method is moved to the database.
* DEV: Upgrade Rails to 7.1
* FIX: Remove references to `Rails.logger.chained`
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* DEV: Make parameters optional to all FakeLogger methods
* FIX: Set `override_level` on Logster loggers (#27519)
A followup to f595d599dd361b7fb39fb3c82cbc11d19d518c19
* FIX: Don’t duplicate Rack response
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
* DEV: Upgrade Rails to 7.1
* FIX: Remove references to `Rails.logger.chained`
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* DEV: Make parameters optional to all FakeLogger methods
* FIX: Set `override_level` on Logster loggers (#27519)
A followup to f595d599dd361b7fb39fb3c82cbc11d19d518c19
* FIX: Don’t duplicate Rack response
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
* Revert "FIX: Set `override_level` on Logster loggers (#27519)"
This reverts commit c1b0488c547bca935de51cfbb86bbc528e9ab2e5.
* Revert "DEV: Make parameters optional to all FakeLogger methods"
This reverts commit 3318dad7b4e3365854319bb55301cf667a2c28d0.
* Revert "FIX: Remove references to `Rails.logger.chained`"
This reverts commit f595d599dd361b7fb39fb3c82cbc11d19d518c19.
* Revert "DEV: Upgrade Rails to 7.1"
This reverts commit 081b00391e47a7f9bc44b9fe8ce88ac97d728352.
This commit fixes a problem where the user will not be able to reset
their password when they only have security keys and backup codes
configured.
This commit also makes the following changes/fixes:
1. Splits password reset system tests to
`spec/system/forgot_password_spec.rb` instead of missing the system
tests in `spec/system/login_spec.rb` which is mainly used to test
the login flow.
2. Fixes a UX issue where the `Use backup codes` or `Use authenticator
app` text is shown on the reset password form when the user does
not have either backup codes or an authenticator app configured.
This makes it more obvious what's happening, and makes it much less likely that users will send repeated reset emails (and thereby hit the rate limit)
Followup to e97ef7e9af60788f5761f6989ea2b70edaa3b79d
This commit adds the ability for site administrators to mark users'
passwords as expired. Note that this commit does not add any client side
interface to mark a user's password as expired.
The following changes are introduced in this commit:
1. Adds a `user_passwords` table and `UserPassword` model. While the
`user_passwords` table is currently used to only store expired
passwords, it will be used in the future to store a user's current
password as well.
2. Adds a `UserPasswordExpirer.expire_user_password` method which can
be used from the Rails console to mark a user's password as expired.
3. Updates `SessionsController#create` to check that the user's current
password has not been marked as expired after confirming the
password. If the password is determined to be expired based on the
existence of a `UserPassword` record with the `password_expired_at`
column set, we will not log the user in and will display a password
expired notice. A forgot password email is automatically send out to
the user as well.
Previously, if the sso= payload was invalid Base64, but signed correctly, there would be no useful log or error. This commit improves things by:
- moving the base64 check before the signature checking so that it's properly surfaced
- split the ParseError exception into PayloadParseError and SignatureError
- add user-facing errors for both of those
- add/improve spec for both
In a handful of situations, we need to verify a user's 2fa credentials before `current_user` is assigned. For example: login, email_login and change-email confirmation. This commit adds an explicit `target_user:` parameter to the centralized 2fa system so that it can be used for those situations.
For safety and clarity, this new parameter only works for anon. If some user is logged in, and target_user is set to a different user, an exception will be raised.
The most common thing that we do with fab! is:
fab!(:thing) { Fabricate(:thing) }
This commit adds a shorthand for this which is just simply:
fab!(:thing)
i.e. If you omit the block, then, by default, you'll get a `Fabricate`d object using the fabricator of the same name.
This is part 2 (of 3) for passkeys support.
This adds a hidden site setting plus routes and controller actions.
1. registering passkeys
Passkeys are registered in a two-step process. First, `create_passkey`
returns details for the browser to create a passkey. This includes
- a challenge
- the relying party ID and Origin
- the user's secure identifier
- the supported algorithms
- the user's existing passkeys (if any)
Then the browser creates a key with this information, and submits it to
the server via `register_passkey`.
2. authenticating passkeys
A similar process happens here as well. First, a challenge is created
and sent to the browser. Then the browser makes a public key credential
and submits it to the server via `passkey_auth_perform`.
3. renaming/deleting passkeys
These routes allow changing the name of a key and deleting it.
4. checking if session is trusted for sensitive actions
Since a passkey is a password replacement, we want to make sure to confirm the user's identity before allowing adding/deleting passkeys. The u/trusted-session GET route returns success if user has confirmed their session (and failed if user hasn't). In the frontend (in the next PR), we're using these routes to show the password confirmation screen.
The `/u/confirm-session` route allows the user to confirm their session with a password. The latter route's functionality already existed in core, under the 2FA flow, but it has been abstracted into its own here so it can be used independently.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This is part 1 of 3, split up of PR #23529. This PR refactors the
webauthn code to support passkey authentication/registration.
Passkeys aren't used yet, that is coming in PRs 2 and 3.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit adds support for an optional `prompt` parameter in the
payload of the /session/sso_provider endpoint. If an SSO Consumer
adds a `prompt=none` parameter to the encoded/signed `sso` payload,
then Discourse will avoid trying to login a not-logged-in user:
* If the user is already logged in, Discourse will immediately
redirect back to the Consumer with the user's credentials in a
signed payload, as usual.
* If the user is not logged in, Discourse will immediately redirect
back to the Consumer with a signed payload bearing the parameter
`failed=true`.
This allows the SSO Consumer to simply test whether or not a user is
logged in, without forcing the user to try to log in. This is useful
when the SSO Consumer allows both anonymous and authenticated access.
(E.g., users that are already logged-in to Discourse can be seamlessly
logged-in to the Consumer site, and anonymous users can remain
anonymous until they explicitly ask to log in.)
This feature is similar to the `prompt=none` functionality in an
OpenID Connect Authentication Request; see
https://openid.net/specs/openid-connect-core-1_0.html#AuthRequest
They're both constant per-instance values, there is no need to store them
in the session. This also makes the code a bit more readable by moving
the `session_challenge_key` method up to the `DiscourseWebauthn` module.
This method is a huge footgun in production, since it calls
the Redis KEYS command. From the Redis documentation at
https://redis.io/commands/keys/:
> Warning: consider KEYS as a command that should only be used in
production environments with extreme care. It may ruin performance when
it is executed against large databases. This command is intended for
debugging and special operations, such as changing your keyspace layout.
Don't use KEYS in your regular application code.
Since we were only using `delete_prefixed` in specs (now that we
removed the usage in production in 24ec06ff85c7acbad9621092b5e50eec2ede7b83)
we can remove this and instead rely on `use_redis_snapshotting` on the
particular tests that need this kind of clearing functionality.
* FEATURE: add a setting to allowlist DiscourseConnect return path domains
This commit adds a site setting to allowlist DiscourseConnect return
path domains. The setting needs supports exact domain or wildcard
character (*) to allow for any domain as return path.
* Add more specs to clarify what is allowed in site setting
* Update setting description to explain what is allowed
This commit resolves a bug where users are not auto approved based on
`SiteSetting.auto_approve_email_domains` when
`SiteSetting.must_approve_users` has been enabled.
This security fix affects sites which have `SiteSetting.must_approve_users`
enabled. There are intentional and unintentional cases where invited
users can be auto approved and are deemed to have skipped the staff approval process.
Instead of trying to reason about when auto-approval should happen, we have decided that
enabling the `must_approve_users` setting going forward will just mean that all new users
must be explicitly approved by a staff user in the review queue. The only case where users are auto
approved is when the `auto_approve_email_domains` site setting is used.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Previously we limited Discourse Connect provider to 1 secret per domain.
This made it pretty awkward to cycle secrets in environments where config
takes time to propagate
This change allows for the same domain to have multiple secrets
Also fixes internal implementation on DiscourseConnectProvider which was
not thread safe as it leaned on class variables to ferry data around
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Discourse has the Discourse Connect Provider protocol that makes it possible to
use a Discourse instance as an identity provider for external sites. As a
natural extension to this protocol, this PR adds a new feature that makes it
possible to use Discourse as a 2FA provider as well as an identity provider.
The rationale for this change is that it's very difficult to implement 2FA
support in a website and if you have multiple websites that need to have 2FA,
it's unrealistic to build and maintain a separate 2FA implementation for each
one. But with this change, you can piggyback on Discourse to take care of all
the 2FA details for you for as many sites as you wish.
To use Discourse as a 2FA provider, you'll need to follow this guide:
https://meta.discourse.org/t/-/32974. It walks you through what you need to
implement on your end/site and how to configure your Discourse instance. Once
you're done, there is only one additional thing you need to do which is to
include `require_2fa=true` in the payload that you send to Discourse.
When Discourse sees `require_2fa=true`, it'll prompt the user to confirm their
2FA using whatever methods they've enabled (TOTP or security keys), and once
they confirm they'll be redirected back to the return URL you've configured and
the payload will contain `confirmed_2fa=true`. If the user has no 2FA methods
enabled however, the payload will not contain `confirmed_2fa`, but it will
contain `no_2fa_methods=true`.
You'll need to be careful to re-run all the security checks and ensure the user
can still access the resource on your site after they return from Discourse.
This is very important because there's nothing that guarantees the user that
will come back from Discourse after they confirm 2FA is the same user that
you've redirected to Discourse.
Internal ticket: t62183.
Since we give a 200 response for login errors, we should be checking
whether the error key exists in each case or not.
Some tests were broken, because they weren't checking.
This PR adds an extra description to the 2FA page when granting a user admin access. It also introduces a general system for adding customized descriptions that can be used by future actions.
(Follow-up to dd6ec65061e747442f3d2ab0eb60764e88eff2d8)
It's very easy to forget to add `require 'rails_helper'` at the top of every core/plugin spec file, and omissions can cause some very confusing/sporadic errors.
By setting this flag in `.rspec`, we can remove the need for `require 'rails_helper'` entirely.
