As the DCBs are "owned" by threads and are handled without locks, no
cross-thread access to those DCBs should be done. Due to this, the show
persistent command for maxadmin has to be changed to show only the size of
the pool.
Moved some typedefs to router.h and server.h, changed a few
constants to these enums. Renamed some types in config.h to
remove "Gateway".
There are still some functions in the public header which are
only used in core, but they seem to fit the theme of public functions
so were not moved.
- All (but the printing/debug functions) are now in snake_case.
- Functions made const correct.
- All function prototypes now have named arguments.
Documentation still to be moved, and file possibly split into
include/mascale/server.h and server/core/maxscale/server.h
- Rename session_getUser to session_get_user
- Change session_get_user and session_get_remote to take a const
SESSION* as argument and to return a const char*.
- Change server_get_persistent, so that user is passed as const.
- Update all users of these functions as appropriate.
The server weighting parameters couldn't be altered online and they
weren't serialized to disk. Only servers that are created online will have
their weighting parameters persisted to disk.
Any changes to servers that aren't created online need to be manually
added to the configuration file in order for them to take effect after the
restart.
Previously, server status changes from MaxAdmin would be set immediately
as long as the server lock could be acquired. This meant that it might take
several seconds until the next monitor pass is executed. Usually, this was
fine but in some situations we would want the monitor to run immediately
after the change (MXS-740 and Galera). This patch changes the logic of
setting and clearing status bits to a delayed mode: changes are first applied
to a "status_pending"-variable, and only once the monitor runs will the
setting be applied. To reduce the delay, the monitor now has a flag
which is checked during sleep (between short 0.1s naps). If set, the
sleep is cut short.
If a server is not monitored, the status bits are set directly.
There is a small possibility of a race condition: If a monitor is stopped or
destroyed before the pending change is applied, the change is forgotten.
The source and destination strings for snprintf must not overlap. A simple
check for the address of the source and destination should solve the case
where they are the same. Behavior is undefined if the pointers aren't the
same but the memory overlaps.
MXS-873 To prevent monitors and MaxAdmin from interfering with each other,
changes to the server status flags now happen under a lock. To avoid
interfering with monitor logic, the monitors now acquire locks to all
of their servers at the start of the monitor loop and release them
before sleeping.
All changes made to the configuration should be traceable. This makes the
process of understanding the life-cycle of a specific MaxScale
installation easier.
The polling system now has a concept of messages. This can be used to send
a synchronous message to the polling system which waits for all threads to
process the message before returning.
Currently this is used to flush unused DCBs when server persistent
statistics are reported.
Making the lists of persistent DCBs thread specific is both a bug fix and
a performance enhancement. There was a small window where a non-owner
thread could receive events for a DCB. By partitioning the DCBs into
thread specific lists, this is avoided by removing the possibility of DCBs
moving between threads.
The config_runtime.h header contains functions that can be used to
manipulate the running configuration. Currently the header contains the
function to create, add, remove and destroy servers.
If a master once had slaves and is in the stale status, it will not retain
this status after a restart. Without storing on-disk information, the
stale master status cannot be deduced by looking at the master
alone. Because of this, the user should be able to manually enable the
stale master status.
Servers created at runtime can now be configured to use SSL. The
configuration is only possible if the server is not in use.
The `alter server` command in maxadmin now takes a list of `key=value`
strings. This allows the user to define multiple alter operations with one
command.
The functions allow simple operations on configuration context
objects. This makes it easier to understand what the code does and allows
reuse of the configuration processing code.
The checks for the server active status are now hidden behind a
macro. This allows for the conditions of the activity to change without
having to alter the code that uses it.
Now that servers use an array for the server name, name truncation can
occur. Although this is nigh impossible, a warning message is a prudent
precaution.
Server creation and allocation are now the same apart from the fact that
allocation only adds the server to the running configuration where as the
creation of a server also persist it to disk.
The server serialization should not be seen through the server.h API. This
allows the serialization method to change without actually having to
change the interfaces.
If a server were to be destroyed, it should not show up among
non-destroyed servers. Even though the servers aren't actually destroyed,
it hides unnecessary information from the user.
When a server is created via MaxAdmin, it will be serialized to disk. This
allows created servers to be retained through a restart of MaxScale.
Currently, all serialized objects are stored in one folder and there is no
structure in the created files. In the future, servers could be created
under a `servers` subdirectory so that it is easier to see what was
added. Whether there is a need for this will be seen.
The server monuser and monpw members were used with the assumption that
they could be NULL. This is no longer true since they were converted to
arrays.
The name member of the server was freed leading to a crash when the server
unit test was run.
The address, port, monuser and monpw parameters of an existing server can
be changed at runtime. The support for enabling SSL will come in a later
commit.
Allowing servers to be modified could also be done by destroying and
recreating them. Since the servers are never actually destroyed, it is
better to allow the alteration of the existing ones.
The function serializes a server to a file. This is intended to be used
with dynamically created servers. The output of the server serialization
will eventually be stored in the configuration file directory (default is
/etc/maxscale.cnf.d/) so that created servers persist even after a
restart.
The dbusers.c was a MySQL protocol specific file which was used directly
by some of the modules.
Added a new return value for the loadusers authenticator entry point which
allows fatal failures to occur when users are loaded. Currently this is
only taken into notice when the service is first started. If a listener
later returns a fatal error, it is only logged but the service stays in
operation.
Moved the MySQLAuth authenticator sources and the tests that relate to
this module into a subdirectory in the authenticator
directory. Eventually, all authenticators could have a subdirectory of
their own.
The default character set should be copied from the server so that
MaxScale appears to be the same. This fixes problems where utf8mb4
couldn't be taken into use because MaxScale would always send latin1 as
the server charset.
The general purpose stuff in skygw_utils.h was moved to utils.h
and the corresponding implementation from skygw_utils.cc to utils.c.
Includes updated accordingly.
Skygw_utils.h is now only used by log_manager and by mlist, which
is only used by log_manager. Consequently, skygw_utils.h was moved
to server/maxscale.
Utils.h needs a separate overhaul.
- Headers now to be included as <maxscale/xyz.h>
- First step, no cleanup of headers has been made. Only moving
from one place to another + necessary modifications.
Authenticators now have a similar mechanism to the `router_options`
parameter which enables configurable authentication.
The authenticators also have a new initialize entry point which is similar
to the createInstance entry point of the filters and routers. The value of
`authenticator_options` is passed as a parameter to this function. The
return vaulue of the `initialize` entry point is passed to the `create`
entry point.
The backend responses are now read in one place and the functions just
read the data. The protocol level will now handle the packet gathering
process and the authentication part just inspects the data.
Backend connections now load authenticators when they are being
connected. In the future, this enables the use of authentication modules
for backend connection.
The `detect_stale_slave` functionality used to only work when MaxScale had
the knowledge that a master server has existed and that replication was
working at some point in time. This might be a "safe" way to do it in
regards to staleness of the data but in practice it is preferrable to
always allow slave to be used for reads.
This change adds the missing functionality to the monitor by assigning
slave status to all servers which are configured as replication slaves
when no master can be found.
The new member variable that was added to the SERVER should be removed in
2.1 where the server_info offers the same functionalty without "polluting"
the SERVER type.
If a relay master server is found in the replication tree, it should not
get the master status. Previously all master servers were assigned the
master status regardless of their depth in the replication tree.
By comparing the depth value of each potential master, the monitor can
find the right master at the root of the replication tree.
973b983 Merge branch 'release-2.0.0' into develop
255dd23 Make spinlock functions take const argument
6e23bab Fix bitmask reallocation
338c189 Rename and clean up slavelag filter
3ea8f28 Fix possible NULL pointer dereference
bfe6738 MXS-830: Add module information to logged messages
1fad962 Fix strncat usage
d38997a Adjust log throttling policy
0be4e4b Add hashtable_item_strcasecmp
726100e Take hashtable convenience functions into use
5e7744a Fix typo in maxadmin.md
c5778c8 Merge branch 'release-2.0.0' into develop
b5762af Move from tmpnam to mkstemp
d6f2c71 Add convenience functions to hashtable
359058a MXS-825: Add support for --execdir
636347c Enable runtime reconfiguration of log throttling
ef9fba9 Improve log throttling documentation
aef917a Implement log throttling
e3a5349 Remove shardrouter.c
8051e80 Remove custom qc_sqlite allocation functions
fd34d60 Initial implementation of the learning firewall
a8752a8 Removed "filestem option" from example
1ef2519 Removed "filestem option" from example
0815cc8 Cleanup spinlock.h
ab4dc99 Clean up hashtable.h
ef2c078 Add prototypes for hashtable copy and free functions
fb5cfaf Add 'log_throttling' configuration entry
300d823 Add proper prototypes for hashtable hash and cmp functions
1c649aa qc_mysqlembedded: Include skygw_...h without path.
d276160 Add missing RPM scripts
e70e644 Fix HTTPAuth installation
1b2b389 Combine utils into the server directory
3ff9913 Add missing utils headers to devel package
407efb2 Fix minor packaging problems
99aa6ad Split MaxScale into core, experimental and devel packages
1290386 Merge branch 'develop' of ssh://github.com/mariadb-corporation/maxscale-new into develop
e59f148 Make scripts POSIX sh compatible
7319266 Fixed SHOW SLAVE STATUS in bonlog router
f8d760a Update Binlogrouter.md
0a904ed Update Replication-Proxy-Binlog-Router-Tutorial.md
75d4202 Update Replication-Proxy-Binlog-Router-Tutorial.md
b8651fc Add missing newline in listmanager.h
c7ad047 Add note about user data caches to release notes
70ccc2b Merge branch 'release-2.0.0' into develop
575d1b6 Mistake - dummy session needs list markers set.
8364508 Merge branch 'develop' into binlog_server_semisync
868b902 Update MaxScale limitations
2c8b327 Store listener caches in separate directories
6e183ec Create unique user data caches for each listeners
f643685 Don't free orphaned tee filter sessions
4179afa Allow binlogrouter to be used without a listener
7ad79af Add function for freeing a listener
677a0a2 Move authentication data from services to listeners
4f12af7 Merge remote-tracking branch 'origin/MXS-677' into develop
1419b81 Semi-Sync support to binlog server: code review updtate
0ea0f01 Semi-Sync support to binlog server: added missing routine
4aad909 Semi-Sync support to binlog server
b824e1e Add authenticator support to httpd.c
705a688 Change tabs to spaces
d0c419e Change method of adding list fields to e.g. DCB
25504fc Document the changed routing priority of hints
41666d1 Remove use_ssl_if_enabled global option
a3584e9 Make routing hints have highest priority
34a1d24 Updated document with new binlog router option
01eedc5 Updated documentation with SSL usage
8a4c0f6 Update Replication-Proxy-Binlog-Router-Tutorial.md
4e374aa Update Replication-Proxy-Binlog-Router-Tutorial.md
f3f3c57 Update Replication-Proxy-Binlog-Router-Tutorial.md
617b79f Binlog Server: error messages typo fix
fa8dfae Binlog Server: error messages review
1b8819c Fix freeing of schemarouter session memory
07f49e1 MXS-788: new code review fix
1fd3b09 MXS-788: show services now displays SSL info
6ca2584 MXS-788 code review fix
ae6a7d0 MXS-788 code review
43d3474 Master server SSL connection
90b2377 Use correct variable in listmanager pre-allocation
9a5b238 Fix listmanager pre-allocation
9c78625 Fix a memory leak when backend authentication fails
e59a966 Fix hang in list_find_free
ff30223 Fix freeing of shared data in schemarouter
fc8f9d3 Add missing include in luafilter
ecf7f53 Add missing NULL value to filter parameter array
636d849 Update memory allocation approach
f0d1d38 Add new allocation functions
97d00a0 Fix writing of uninitialized data to logs
e72c9b2 Merge branch 'release-2.0.0' into develop
cf2b712 Merge branch 'release-2.0.0' into develop
8917c5c Change the logic behind valid list entry checks
c10deff Improve documentation about version_string
f59f1f7 Merge branch 'develop' of ssh://github.com/mariadb-corporation/maxscale-new into develop
c88edb3 Backend authentication failure improvement
abd5bee Revert "Backend authentication failure improvement"
5bb3107 Backend authentication failure improvement
b7f434a Add new allocation functions
3f022fa Fix stupid mistake
99c4317 Merge remote-tracking branch 'origin/MXS-677' into develop
3c1ded6 Added connection/authentication failure error reporting in SHOW SLAVE STATUS
0a60f7b Tidy up and deal with review points.
ba103ff blr_slave.c: Update strncpy usage
467331e blr_master.c: Strncpy usage updates
d2b7c0c Merge remote-tracking branch 'origin/develop-nullauth-merge' into develop
5a8c1d0 qc: Measure execution time at the right place.
bccdb93 Merge branch 'NullAuthDeny' into develop
2e6511c Add 5.5.5 prefix to all version strings that lack it
314655a Improve DCB and session initialization and list handling
e1c43f0 MXS-655: Make MaxScale logging logrotate(8) compatible
ce36afd MXS-626: Don't log a header unless maxlog enabled
dcd47a7 blr_file.c: Replace uses of strncpy
6b8f576 bls_slave.c: Replace strncpy with memcpy
68a0039 Add list preallocation, tidy up, simplify init.
cb37d1b Fix copyright etc headers.
11a400d Tidy; comment; fix bad copies and mistakes.
7e36ec4 Add list manager files.
c4794e3 Initial code for list manager.
1b42e25 Merge remote-tracking branch 'origin/MXS-765' into develop
d50f617 Fix problems, extend tests, respond to review.
dcb4a91 Filter test folder removed
0b60dbe Add a couple of comments.
83cdba0 Fix overwriting problem.
ba5d353 Fix overwriting problem.
53671cb Small fixes in response to review.
173d049 blr.c: Review strncpy usage
4ff6ef2 binlog_common.c: Replace strncpy with memcpy
f238e03 maxbinlogcheck.s: Replace strncpy
9807f8d harness: Replace unnecessary use of strncpy
8c7fe6a avro: Modify strncpy usage
9b8008e Small improvements.
b7f784f Fix mistakes in testqueuemanager.c
cc26962 Restore missing poll.c code; add testqueuemanager.c.
2e91806 Format the filter harness
22059e6 Initial implementation connection queueing.
c604dc2 readwritesplit.c: Improve COM_INIT_DB handling
454d920 schemarouter.c: Replace strncpy with strcpy
8e85d66 sharding_common.c: Too long a database name handled explicitly
77f4446 Astyle schemarouter
491f7c2 maxinfo.c: Replace strncpy with memcpy
6b98105 maxinfo: Reformat with astyle
c1dbf08 Handle oversize user and database names
5fa4a0f Merge branch 'develop' of ssh://github.com/mariadb-corporation/maxscale-new into develop
706963b BLR_DBUSERS_TAIL new var in blr.h
d75b9af Tweak comments, remove trailing blanks.
ab2400a Optimise statistics gathering by inline & simpler fns.
fb59ddc Remove unnecessary strncpy/strncat usage in Binlog Server
bdcd551 resultset.c: Change strncpy to memcpy
c6b1c5e Reject rather than cut too long a path
6d8f112 Remove unnecessary strncpy/strncat usage
18bf5ed Remove unnecessary strncpy usage
dc0e2db Make maxpasswd more userfriendly
c9c8695 Fix calculation of padded_len in encryptPassword
2cfd2c6 dbusers.c: Check strncpy usage
7ab9342 Make more thorough checks in secrets_readKeys
be7d593 Format cli.c debugcli.c testroute.c webserver.c
1ee5efb config.c: Check usage of strncpy
3043b12 gq_utils.c: Unnecessary use of strncpy removed
77874ac Add help to maxkeys
38392a3 Update secrets_writeKeys documentation
2d1325c Make SSL optional in MaxScale's own communication
bda00da Fix avro build failures
b2cb31a Add more OOM macros
41ccf17 Fix strdup usage
a48f732 Fix realloc calls
20771f6 Add forgotten extern "C" block
8faf35a Add maxscale allocation functions
bb47890 Add macros for OOM logging
afea388 Fix silly mistakes.
6dafd22 Make deny default for null auth; move code from common to auth.
