On a platform that isn't supplying __FILE__, previous coding would either
crash or give a stale result for the filename string. Not sure how likely
that is, but the original code catered for it, so let's keep doing so.
In vpath builds, the __FILE__ macro that is used in verbose error
reports contains the full absolute file name, which makes the error
messages excessively verbose. So keep only the base name, thus
matching the behavior of non-vpath builds.
This can change the meaning of queries, if the blank line happens to
occur in the middle of a quoted literal, as per complaint from Tomas Vondra.
Back-patch to all supported branches.
This assumption can be wrong when the toaster is passed a raw on-disk
tuple, because the tuple might pre-date an ALTER TABLE ADD COLUMN operation
that added columns without rewriting the table. In such a case the tuple's
natts value is smaller than what we expect from the tuple descriptor, and
so its t_hoff value could be smaller too. In fact, the tuple might not
have a null bitmap at all, and yet our current opinion of it is that it
contains some trailing nulls.
In such a situation, toast_insert_or_update did the wrong thing, because
to save a few lines of code it would use the old t_hoff value as the offset
where heap_fill_tuple should start filling data. This did not leave enough
room for the new nulls bitmap, with the result that the first few bytes of
data could be overwritten with null flag bits, as in a recent report from
Hubert Depesz Lubaczewski.
The particular case reported requires ALTER TABLE ADD COLUMN followed by
CREATE TABLE AS SELECT * FROM ... or INSERT ... SELECT * FROM ..., and
further requires that there be some out-of-line toasted fields in one of
the tuples to be copied; else we'll not reach the troublesome code.
The problem can only manifest in this form in 8.4 and later, because
before commit a77eaa6a95009a3441e0d475d1980259d45da072, CREATE TABLE AS or
INSERT/SELECT wouldn't result in raw disk tuples getting passed directly
to heap_insert --- there would always have been at least a junkfilter in
between, and that would reconstitute the tuple header with an up-to-date
t_natts and hence t_hoff. But I'm backpatching the tuptoaster change all
the way anyway, because I'm not convinced there are no older code paths
that present a similar risk.
If a tuple in a syscache contains an out-of-line toasted field, and we
try to fetch that field shortly after some other transaction has committed
an update or deletion of the tuple, there is a race condition: vacuum
could come along and remove the toast tuples before we can fetch them.
This leads to transient failures like "missing chunk number 0 for toast
value NNNNN in pg_toast_2619", as seen in recent reports from Andrew
Hammond and Tim Uckun.
The design idea of syscache is that access to stale syscache entries
should be prevented by relation-level locks, but that fails for at least
two cases where toasted fields are possible: ANALYZE updates pg_statistic
rows without locking out sessions that might want to plan queries on the
same table, and CREATE OR REPLACE FUNCTION updates pg_proc rows without
any meaningful lock at all.
The least risky fix seems to be an idea that Heikki suggested when we
were dealing with a related problem back in August: forcibly detoast any
out-of-line fields before putting a tuple into syscache in the first place.
This avoids the problem because at the time we fetch the parent tuple from
the catalog, we should be holding an MVCC snapshot that will prevent
removal of the toast tuples, even if the parent tuple is outdated
immediately after we fetch it. (Note: I'm not convinced that this
statement holds true at every instant where we could be fetching a syscache
entry at all, but it does appear to hold true at the times where we could
fetch an entry that could have a toasted field. We will need to be a bit
wary of adding toast tables to low-level catalogs that don't have them
already.) An additional benefit is that subsequent uses of the syscache
entry should be faster, since they won't have to detoast the field.
Back-patch to all supported versions. The problem is significantly harder
to reproduce in pre-9.0 releases, because of their willingness to flush
every entry in a syscache whenever the underlying catalog is vacuumed
(cf CatalogCacheFlushRelation); but there is still a window for trouble.
cash_out failed to handle multiple-byte thousands separators, as per bug
#6277 from Alexander Law. In addition, cash_in didn't handle that either,
nor could it handle multiple-byte positive_sign. Both routines failed to
support multiple-byte mon_decimal_point, which I did not think was worth
changing, but at least now they check for the possibility and fall back to
using '.' rather than emitting invalid output. Also, make cash_in handle
trailing negative signs, which formerly it would reject. Since cash_out
generates trailing negative signs whenever the locale tells it to, this
last omission represents a fail-to-reload-dumped-data bug. IMO that
justifies patching this all the way back.
When a foreign-key constraint references another column of the same table,
row updates will queue both the PK's ON UPDATE action and the FK's CHECK
action in the same event. The ON UPDATE action must execute first, else
the CHECK will check a non-final state of the row and possibly throw an
inappropriate error, as seen in bug #6268 from Roman Lytovchenko.
Now, the firing order of multiple triggers for the same event is determined
by the sort order of their pg_trigger.tgnames, and the auto-generated names
we use for FK triggers are "RI_ConstraintTrigger_NNNN" where NNNN is the
trigger OID. So most of the time the firing order is the same as creation
order, and so rearranging the creation order fixes it.
This patch will fail to fix the problem if the OID counter wraps around or
adds a decimal digit (eg, from 99999 to 100000) while we are creating the
triggers for an FK constraint. Given the small odds of that, and the low
usage of self-referential FKs, we'll live with that solution in the back
branches. A better fix is to change the auto-generated names for FK
triggers, but it seems unwise to do that in stable branches because there
may be client code that depends on the naming convention. We'll fix it
that way in HEAD in a separate patch.
Back-patch to all supported branches, since this bug has existed for a long
time.
This view was being insufficiently careful about matching the FK constraint
to the depended-on primary or unique key constraint. That could result in
failure to show an FK constraint at all, or showing it multiple times, or
claiming that it depended on a different constraint than the one it really
does. Fix by joining via pg_depend to ensure that we find only the correct
dependency.
Back-patch, but don't bump catversion because we can't force initdb in back
branches. The next minor-version release notes should explain that if you
need to fix this in an existing installation, you can drop the
information_schema schema then re-create it by sourcing
$SHAREDIR/information_schema.sql in each database (as a superuser of
course).
transform_null_equals is only supposed to affect "foo = NULL" expressions
given directly by the user, not the internal "foo = NULL" expression
generated from CASE-WHEN.
This fixes bug #6242, reported by Sergey. Backpatch to all supported
branches.
We were mapping "Central America Standard Time" to "CST6CDT", which seems
entirely wrong, because according to the Olson timezone database noplace
in Central America observes daylight savings time on any regular basis ---
and certainly not according to the USA DST rules that are implied by
"CST6CDT". (Mexico is an exception, but they can be disregarded since
they have a separate timezone name in Windows.) So, map this zone name to
plain "CST6", which will provide a fixed UTC offset.
As written, this patch will also result in mapping "Central America
Daylight Time" to CST6. I considered hacking things so that would still
map to CST6CDT, but it seems it would confuse win32tzlist.pl to put those
two names in separate entries. Since there's little evidence that any
such zone name is used in the wild, much less that CST6CDT would be a good
match for it, I'm not too worried about what we do with it.
Per complaint from Pratik Chirania.
This oversight led to a massive memory leak --- upwards of 10KB per tuple
--- during creation-time verification of an exclusion constraint based on a
GIST index. In most other scenarios it'd just be a leak of 10KB that would
be recovered at end of query, so not too significant; though perhaps the
leak would be noticeable in a situation where a GIST index was being used
in a nestloop inner indexscan. In any case, it's a real leak of long
standing, so patch all supported branches. Per report from Harald Fuchs.
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
Since the last couple of columns of pg_type are often NULL,
sizeof(FormData_pg_type) can be an overestimate of the actual size of the
tuple data part. Therefore memcpy'ing that much out of the catalog cache,
as analyze.c was doing, poses a small risk of copying past the end of
memory and incurring SIGSEGV. No such crash has been identified in the
field, but we've certainly seen the equivalent happen in other code paths,
so patch this one all the way back.
Per valgrind testing by Noah Misch, though this is not his proposed patch.
I chose to use SearchSysCacheCopy1 rather than inventing special-purpose
infrastructure for copying only the minimal part of a pg_type tuple.
">" should be ">>". This typo results in failure to use all of the bits
of the provided seed.
This might rise to the level of a security bug if we were relying on
srand48 for any security-critical purposes, but we are not --- in fact,
it's not used at all unless the platform lacks srandom(), which is
improbable. Even on such a platform the exposure seems minimal.
Reported privately by Andres Freund.
These days, such a response is far more likely to signify a server-side
problem, such as fork failure. Reporting "server does not support SSL"
(in sslmode=require) could be quite misleading. But the results could
be even worse in sslmode=prefer: if the problem was transient and the
next connection attempt succeeds, we'll have silently fallen back to
protocol version 2.0, possibly disabling features the user needs.
Hence, it seems best to just eliminate the assumption that backing off
to non-SSL/2.0 protocol is the way to recover from an "E" response, and
instead treat the server error the same as we would in non-SSL cases.
I tested this change against a pre-7.0 server, and found that there
was a second logic bug in the "prefer" path: the test to decide whether
to make a fallback connection attempt assumed that we must have opened
conn->ssl, which in fact does not happen given an "E" response. After
fixing that, the code does indeed connect successfully to pre-7.0,
as long as you didn't set sslmode=require. (If you did, you get
"Unsupported frontend protocol", which isn't completely off base
given the server certainly doesn't support SSL.)
Since there seems no reason to believe that pre-7.0 servers exist anymore
in the wild, back-patch to all supported branches.
There are assorted situations wherein PQconnectPoll() will abandon a
connection attempt and try again with different parameters (eg, SSL versus
not SSL). However, the code forgot to discard any pending data in libpq's
I/O buffers when doing this. In at least one case (server returns E
message during SSL negotiation), there is unread input data which bollixes
the next connection attempt. I have not checked to see whether this is
possible in the other cases where we close the socket and retry, but it
seems like a matter of good defensive programming to add explicit
buffer-flushing code to all of them.
This is one of several issues exposed by Daniel Farina's report of
misbehavior after a server-side fork failure.
This has been wrong since forever, so back-patch to all supported branches.
As pointed out by Sergey Koposov, repeated invocations of tbm_lossify can
make building a large tidbitmap into an O(N^2) operation. To fix, make
sure we remove more than the minimum amount of information per call, and
add a fallback path to behave sanely if we're unable to fit the bitmap
within the requested amount of memory.
This has been wrong since the tidbitmap code was written, so back-patch
to all supported branches.
The previous code tried to synchronize by unlinking the init file twice,
but that doesn't actually work: it leaves a window wherein a third process
could read the already-stale init file but miss the SI messages that would
tell it the data is stale. The result would be bizarre failures in catalog
accesses, typically "could not read block 0 in file ..." later during
startup.
Instead, hold RelCacheInitLock across both the unlink and the sending of
the SI messages. This is more straightforward, and might even be a bit
faster since only one unlink call is needed.
This has been wrong since it was put in (in 2002!), so back-patch to all
supported releases.
pg_backup_db.c contained a mini SQL lexer with which it tried to identify
boundaries between SQL commands, but that code was not designed to cope
with standard_conforming_strings, and would get the wrong answer if a
backslash immediately precedes a closing single quote in such a string,
as per report from Julian Mehnle. The bug only affects direct-to-database
restores from archive files made with standard_conforming_strings = on.
Rather than complicating the code some more to try to fix that, let's just
rip it all out. The only reason it was needed was to cope with COPY data
embedded into ordinary archive entries, which was a layout that was used
only for about the first three weeks of the archive format's existence,
and never in any production release of pg_dump. Instead, just rely on the
archive file layout to tell us whether we're printing COPY data or not.
This bug represents a data corruption hazard in all releases in which
standard_conforming_strings can be turned on, ie 8.2 and later, so
back-patch to all supported branches.
This disables an entirely unnecessary "sanity check" that causes failures
in nonblocking mode, because OpenSSL complains if we move or compact the
write buffer. The only actual requirement is that we not modify pending
data once we've attempted to send it, which we don't. Per testing and
research by Martin Pihlak, though this fix is a lot simpler than his patch.
I put the same change into the backend, although it's less clear whether
it's necessary there. We do use nonblock mode in some situations in
streaming replication, so seems best to keep the same behavior in the
backend as in libpq.
Back-patch to all supported releases.
First, when following a right-link, we incorrectly marked the current page
as the parent of the right sibling. In reality, the parent of the right page
is the same as the parent of the current page (or some page to the right of
it, gistFindCorrectParent() will sort that out).
Secondly, when we follow a right-link, we must prepend, not append, the right
page to our list of pages to visit. That's because we assume that once we
hit a leaf page in the list, all the rest are leaf pages too, and give up.
To hit these bugs, you need concurrent actions and several unlucky accidents.
Another backend must split the root page, while you're in process of
splitting a lower-level page. Furthermore, while you scan the internal nodes
to re-find the parent, another backend needs to again split some more internal
pages. Even then, the bugs don't necessarily manifest as user-visible errors
or index corruption.
While we're at it, make the error reporting a bit better if gistFindPath()
fails to re-find the parent. It used to be an assertion, but an elog() seems
more appropriate.
Backpatch to all supported branches.
handleCopyIn incremented pset.lineno for each line of COPY data read from
a file. This is correct when reading from the current script file (i.e.,
we are doing COPY FROM STDIN followed by in-line data), but it's wrong if
the data is coming from some other file. Per bug #6083 from Steve Haslam.
Back-patch to all supported versions.
Since commit a4d03bbcdaf7739d7e9073ee76bb186f68ddc163, "make dist" has
built both gzip- and bzip2-compressed tarballs. However, this was
pretty useless, because our tarball build script didn't know about it
and proceeded to overwrite the bz2 file with new data. Back-patch the
change to all active branches, so that creation of the tar.bz2 file
can be removed from the build script.
For some reason, when we (I) added table lock acquisition to pg_dump,
we didn't think about making it happen as soon as possible after the
start of the transaction. What with subsequent additions, there was
actually quite a lot going on before we got around to that; which sort
of defeats the purpose. Rearrange the order of calls in dumpSchema()
to close the risk window as much as we easily can. Back-patch to all
supported branches.
The previous code went into an infinite loop after overflow. In fact,
an overflow is not really an error; it just means that the current
value is the last one we need to return. So, just arrange to stop
immediately when overflow is detected.
Back-patch all the way.
Apparently there is no buildfarm critter exercising this case after all,
because it fails in several places. With this patch, build, install,
check-world, and installcheck-world pass for me on OS X.
ReadRecord's habit of using both direct references to tmpRecPtr and
references to *RecPtr (which is pointing at tmpRecPtr) triggers an
optimization bug in gcc 4.6.0, which apparently has forgotten about
aliasing rules. Avoid the compiler bug, and make the code more readable
to boot, by getting rid of the direct references. Improve the comments
while at it.
Back-patch to all supported versions, in case they get built with 4.6.0.
Tom Lane, with some cosmetic suggestions from Alex Hunsaker
We were trying to make that strictly an internal implementation detail,
but it turns out that it's exposed anyway when dumping a view defined
like
CREATE VIEW test_view AS VALUES (1), (2), (3) ORDER BY 1;
This comes out as
CREATE VIEW ... ORDER BY "*VALUES*".column1;
which fails to parse when reloading the dump.
Hacking ruleutils.c to suppress the column qualification looks like it'd
be a risky business, so instead promote the RTE alias to full-fledged
usability.
Per bug #6049 from Dylan Adams. Back-patch to all supported branches.
My previous commit disallowed this operation, but did nothing about
cleaning up the damage if one had already been done. With the operation
disallowed, it's okay to just forcibly clear xmax in a sequence's tuple,
since any value seen there could not represent a live transaction's lock.
So, any sequence-specific operation will repair the problem automatically,
whether or not the user has already seen "could not access status of
transaction" failures.
We can't allow this because such an operation stores its transaction XID
into the sequence tuple's xmax. Because VACUUM doesn't process sequences
(and we don't want it to start doing so), such an xmax value won't get
frozen, meaning it will eventually refer to nonexistent pg_clog storage,
and even wrap around completely. Since the row lock is ignored by nextval
and setval, the usefulness of the operation is highly debatable anyway.
Per reports of trouble with pgpool 3.0, which had ill-advisedly started
using such commands as a form of locking.
In HEAD, also disallow SELECT FOR UPDATE/SHARE on toast tables. Although
this does work safely given the current implementation, there seems no
good reason to allow it. I refrained from changing that behavior in
back branches, however.
Apparently sane-looking penalty code might return small negative values,
for example because of roundoff error. This will confuse places like
gistchoose(). Prevent problems by clamping negative penalty values to
zero. (Just to be really sure, I also made it force NaNs to zero.)
Back-patch to all supported branches.
Alexander Korotkov
Even though our existing code for handling credentials control messages has
been basically unchanged since 2001, it was fundamentally wrong: it did not
ensure proper alignment of the supplied buffer, and it was calculating
buffer sizes and message sizes incorrectly. This led to failures on
platforms where alignment padding is relevant, for instance FreeBSD on
64-bit platforms, as seen in a recent Debian bug report passed on by
Martin Pitt (http://bugs.debian.org//cgi-bin/bugreport.cgi?bug=612888).
Rewrite to do the message-whacking using the macros specified in RFC 2292,
following a suggestion from Theo de Raadt in that thread. Tested by me
on Debian/kFreeBSD-amd64; since OpenBSD and NetBSD document the identical
CMSG API, it should work there too.
Back-patch to all supported branches.
We had some hacks in ruleutils.c to cope with various odd transformations
that the optimizer could do on a CASE foo WHEN "CaseTestExpr = RHS" clause.
However, the fundamental impossibility of covering all cases was exposed
by Heikki, who pointed out that the "=" operator could get replaced by an
inlined SQL function, which could contain nearly anything at all. So give
up on the hacks and just print the expression as-is if we fail to recognize
it as "CaseTestExpr = RHS". (We must cover that case so that decompiled
rules print correctly; but we are not under any obligation to make EXPLAIN
output be 100% valid SQL in all cases, and already could not do so in some
other cases.) This approach requires that we have some printable
representation of the CaseTestExpr node type; I used "CASE_TEST_EXPR".
Back-patch to all supported branches, since the problem case fails in all.
The planner can sometimes compute very large values for numGroups, and in
cases where we have no alternative to building a hashtable, such a value
will get fed directly to BuildTupleHashTable as its nbuckets parameter.
There were two ways in which that could go bad. First, BuildTupleHashTable
declared the parameter as "int" but most callers were passing "long"s,
so on 64-bit machines undetected overflow could occur leading to a bogus
negative value. The obvious fix for that is to change the parameter to
"long", which is what I've done in HEAD. In the back branches that seems a
bit risky, though, since third-party code might be calling this function.
So for them, just put in a kluge to treat negative inputs as INT_MAX.
Second, hash_create can go nuts with extremely large requested table sizes
(notably, my_log2 becomes an infinite loop for inputs larger than
LONG_MAX/2). What seems most appropriate to avoid that is to bound the
initial table size request to work_mem.
This fixes bug #6035 reported by Daniel Schreiber. Although the reported
case only occurs back to 8.4 since it involves WITH RECURSIVE, I think
it's a good idea to install the defenses in all supported branches.
