An array of LLVMBasicBlockRef is allocated with the size used for an
element being "LLVMBasicBlockRef *" rather than "LLVMBasicBlockRef".
LLVMBasicBlockRef is a type that refers to a pointer, so this did not
directly cause a problem because both should have the same size, still
it is incorrect.
This issue has been spotted while reviewing a different patch, and
exists since 2a0faed9d702, so backpatch all the way down.
Discussion: https://postgr.es/m/CA+hUKGLngd9cKHtTUuUdEo2eWEgUcZ_EQRbP55MigV2t_zTReg@mail.gmail.com
Backpatch-through: 14
PostgreSQL's src/port/open.c has always set bInheritHandle = TRUE
when opening files on Windows, making all file descriptors inheritable
by child processes. This meant the O_CLOEXEC flag, added to many call
sites by commit 1da569ca1f (v16), was silently ignored.
The original commit included a comment suggesting that our open()
replacement doesn't create inheritable handles, but it was a mis-
understanding of the code path. In practice, the code was creating
inheritable handles in all cases.
This hasn't caused widespread problems because most child processes
(archive_command, COPY PROGRAM, etc.) operate on file paths passed as
arguments rather than inherited file descriptors. Even if a child
wanted to use an inherited handle, it would need to learn the numeric
handle value, which isn't passed through our IPC mechanisms.
Nonetheless, the current behavior is wrong. It violates documented
O_CLOEXEC semantics, contradicts our own code comments, and makes
PostgreSQL behave differently on Windows than on Unix. It also creates
potential issues with future code or security auditing tools.
To fix, define O_CLOEXEC to _O_NOINHERIT in master, previously used by
O_DSYNC. We use different values in the back branches to preserve
existing values. In pgwin32_open_handle() we set bInheritHandle
according to whether O_CLOEXEC is specified, for the same atomic
semantics as POSIX in multi-threaded programs that create processes.
Backpatch-through: 16
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com> (minor adjustments)
Discussion: https://postgr.es/m/e2b16375-7430-4053-bda3-5d2194ff1880%40gmail.com
In commit 789d65364c, we started updating the next multixid's offset
too when recording a multixid, so that it can always be used to
calculate the number of members. I got it wrong at offset wraparound:
we need to skip over offset 0. Fix that.
Discussion: https://www.postgresql.org/message-id/d9996478-389a-4340-8735-bfad456b313c@iki.fi
Backpatch-through: 14
This commit adds the version information of a node initialized by
Cluster.pm, that may vary depending on the install_path given by the
test. The code was written so as the node information, that includes
the version number, was dumped before the version number was set.
This is particularly useful for the pg_upgrade TAP tests, that may mix
several versions for cross-version runs. The TAP infrastructure also
allows mixing nodes with different versions, so this information can be
useful for out-of-core tests.
Backpatch down to v15, where Cluster.pm and the pg_upgrade TAP tests
have been introduced.
Author: Potapov Alexander <a.potapov@postgrespro.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/e59bb-692c0a80-5-6f987180@170377126
Backpatch-through: 15
With this commit, the next multixid's offset will always be set on the
offsets page, by the time that a backend might try to read it, so we
no longer need the waiting mechanism with the condition variable. In
other words, this eliminates "corner case 2" mentioned in the
comments.
The waiting mechanism was broken in a few scenarios:
- When nextMulti was advanced without WAL-logging the next
multixid. For example, if a later multixid was already assigned and
WAL-logged before the previous one was WAL-logged, and then the
server crashed. In that case the next offset would never be set in
the offsets SLRU, and a query trying to read it would get stuck
waiting for it. Same thing could happen if pg_resetwal was used to
forcibly advance nextMulti.
- In hot standby mode, a deadlock could happen where one backend waits
for the next multixid assignment record, but WAL replay is not
advancing because of a recovery conflict with the waiting backend.
The old TAP test used carefully placed injection points to exercise
the old waiting code, but now that the waiting code is gone, much of
the old test is no longer relevant. Rewrite the test to reproduce the
IPC/MultixactCreation hang after crash recovery instead, and to verify
that previously recorded multixids stay readable.
Backpatch to all supported versions. In back-branches, we still need
to be able to read WAL that was generated before this fix, so in the
back-branches this includes a hack to initialize the next offsets page
when replaying XLOG_MULTIXACT_CREATE_ID for the last multixid on a
page. On 'master', bump XLOG_PAGE_MAGIC instead to indicate that the
WAL is not compatible.
Author: Andrey Borodin <amborodin@acm.org>
Reviewed-by: Dmitry Yurichev <dsy.075@yandex.ru>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Ivan Bykov <i.bykov@modernsys.ru>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/172e5723-d65f-4eec-b512-14beacb326ce@yandex.ru
Backpatch-through: 14
Formerly, when updating an auto-updatable view, or a relation with
rules, if the original query had any data-modifying CTEs, the rewriter
would rewrite those CTEs multiple times as RewriteQuery() recursed
into the product queries. In most cases that was harmless, because
RewriteQuery() is mostly idempotent. However, if the CTE involved
updating an always-generated column, it would trigger an error because
any subsequent rewrite would appear to be attempting to assign a
non-default value to the always-generated column.
This could perhaps be fixed by attempting to make RewriteQuery() fully
idempotent, but that looks quite tricky to achieve, and would probably
be quite fragile, given that more generated-column-type features might
be added in the future.
Instead, fix by arranging for RewriteQuery() to rewrite each CTE
exactly once (by tracking the number of CTEs already rewritten as it
recurses). This has the advantage of being simpler and more efficient,
but it does make RewriteQuery() dependent on the order in which
rewriteRuleAction() joins the CTE lists from the original query and
the rule action, so care must be taken if that is ever changed.
Reported-by: Bernice Southey <bernice.southey@gmail.com>
Author: Bernice Southey <bernice.southey@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CAEDh4nyD6MSH9bROhsOsuTqGAv_QceU_GDvN9WcHLtZTCYM1kA@mail.gmail.com
Backpatch-through: 14
Normally, if a WHERE clause is implied by the predicate of a partial
index, we drop that clause from the set of quals used with the index,
since it's redundant to test it if we're scanning that index.
However, if it's a hash index (or any !amoptionalkey index), this
could result in dropping all available quals for the index's first
key, preventing us from generating an indexscan.
It's fair to question the practical usefulness of this case. Since
hash only supports equality quals, the situation could only arise
if the index's predicate is "WHERE indexkey = constant", implying
that the index contains only one hash value, which would make hash
a really poor choice of index type. However, perhaps there are
other !amoptionalkey index AMs out there with which such cases are
more plausible.
To fix, just don't filter the candidate indexquals this way if
the index is !amoptionalkey. That's a bit hokey because it may
result in testing quals we didn't need to test, but to do it
more accurately we'd have to redundantly identify which candidate
quals are actually usable with the index, something we don't know
at this early stage of planning. Doesn't seem worth the effort.
Reported-by: Sergei Glukhov <s.glukhov@postgrespro.ru>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/e200bf38-6b45-446a-83fd-48617211feff@postgrespro.ru
Backpatch-through: 14
Accidentally the code in LWLockWakeup() checked the list of to-be-woken up
processes to see if LW_FLAG_HAS_WAITERS should be unset. That means that
HAS_WAITERS would not get unset immediately, but only during the next,
unnecessary, call to LWLockWakeup().
Luckily, as the code stands, this is just a small efficiency issue.
However, if there were (as in a patch of mine) a case in which LWLockWakeup()
would not find any backend to wake, despite the wait list not being empty,
we'd wrongly unset LW_FLAG_HAS_WAITERS, leading to potentially hanging.
While the consequences in the backbranches are limited, the code as-is
confusing, and it is possible that there are workloads where the additional
wait list lock acquisitions hurt, therefore backpatch.
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
Backpatch-through: 14
The fix for bug #19055 (commit b0cc0a71e) allowed CTE references in
sub-selects within aggregate functions to affect the semantic levels
assigned to such aggregates. It turns out this broke some related
cases, leading to assertion failures or strange planner errors such
as "unexpected outer reference in CTE query". After experimenting
with some alternative rules for assigning the semantic level in
such cases, we've come to the conclusion that changing the level
is more likely to break things than be helpful.
Therefore, this patch undoes what b0cc0a71e changed, and instead
installs logic to throw an error if there is any reference to a
CTE that's below the semantic level that standard SQL rules would
assign to the aggregate based on its contained Var and Aggref nodes.
(The SQL standard disallows sub-selects within aggregate functions,
so it can't reach the troublesome case and hence has no rule for
what to do.)
Perhaps someone will come along with a legitimate query that this
logic rejects, and if so probably the example will help us craft
a level-adjustment rule that works better than what b0cc0a71e did.
I'm not holding my breath for that though, because the previous
logic had been there for a very long time before bug #19055 without
complaints, and that bug report sure looks to have originated from
fuzzing not from real usage.
Like b0cc0a71e, back-patch to all supported branches, though
sadly that no longer includes v13.
Bug: #19106
Reported-by: Kamil Monicz <kamil@monicz.dev>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19106-9dd3668a0734cd72@postgresql.org
Backpatch-through: 14
Until d2ea2d310dfdc40328aca5b6c52225de78432e01, the PS_USE_PS_STRINGS
option was used on the GNU/Hurd. As this option got removed and
PS_USE_CLOBBER_ARGV appears to work fine nowadays on the Hurd, define
this one to re-enable process title changes on this platform.
In the 14 and 15 branches, the existing test for __hurd__ (added 25
years ago by commit 209aa77d, removed in 16 by the above commit) is left
unchanged for now as it was activating slightly different code paths and
would need investigation by a Hurd user.
Author: Michael Banck <mbanck@debian.org>
Discussion: https://postgr.es/m/CA%2BhUKGJMNGUAqf27WbckYFrM-Mavy0RKJvocfJU%3DJ2XcAZyv%2Bw%40mail.gmail.com
Backpatch-through: 16
Commit 5e4fcbe531 added a check_rights parameter to this function
for use by ALTER TABLE commands that re-create statistics objects.
However, we intentionally ignore check_rights when verifying
relation ownership because this function's lookup could return a
different answer than the caller's. This commit adds a note to
this effect so that we remember it down the road.
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 14
Before we started to freeze async notify entries (commit 8eeb4a0f7c),
no one looked at the 'xid' on an entry with invalid 'dboid'. But now
we might actually need to freeze it later. Initialize them with
InvalidTransactionId to begin with, to avoid that work later.
Álvaro pointed this out in review of commit 8eeb4a0f7c, but I forgot
to include this change there.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://www.postgresql.org/message-id/202511071410.52ll56eyixx7@alvherre.pgsql
Backpatch-through: 14
Previous commit fixed a bug where VACUUM would truncate the CLOG
that's still needed to check the commit status of XIDs in the async
notify queue, but as mentioned in the commit message, it wasn't a full
fix. If a backend is executing asyncQueueReadAllNotifications() and
has just made a local copy of an async SLRU page which contains old
XIDs, vacuum can concurrently truncate the CLOG covering those XIDs,
and the backend still gets an error when it calls
TransactionIdDidCommit() on those XIDs in the local copy. This commit
fixes that race condition.
To fix, hold the SLRU bank lock across the TransactionIdDidCommit()
calls in NOTIFY processing.
Per Tom Lane's idea. Backpatch to all supported versions.
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://www.postgresql.org/message-id/2759499.1761756503@sss.pgh.pa.us
Backpatch-through: 14
The async notification queue contains the XID of the sender, and when
processing notifications we call TransactionIdDidCommit() on the
XID. But we had no safeguards to prevent the CLOG segments containing
those XIDs from being truncated away. As a result, if a backend didn't
for some reason process its notifications for a long time, or when a
new backend issued LISTEN, you could get an error like:
test=# listen c21;
ERROR: 58P01: could not access status of transaction 14279685
DETAIL: Could not open file "pg_xact/000D": No such file or directory.
LOCATION: SlruReportIOError, slru.c:1087
To fix, make VACUUM "freeze" the XIDs in the async notification queue
before truncating the CLOG. Old XIDs are replaced with
FrozenTransactionId or InvalidTransactionId.
Note: This commit is not a full fix. A race condition remains, where a
backend is executing asyncQueueReadAllNotifications() and has just
made a local copy of an async SLRU page which contains old XIDs, while
vacuum concurrently truncates the CLOG covering those XIDs. When the
backend then calls TransactionIdDidCommit() on those XIDs from the
local copy, you still get the error. The next commit will fix that
remaining race condition.
This was first reported by Sergey Zhuravlev in 2021, with many other
people hitting the same issue later. Thanks to:
- Alexandra Wang, Daniil Davydov, Andrei Varashen and Jacques Combrink
for investigating and providing reproducable test cases,
- Matheus Alcantara and Arseniy Mukhin for review and earlier proposed
patches to fix this,
- Álvaro Herrera and Masahiko Sawada for reviews,
- Yura Sokolov aka funny-falcon for the idea of marking transactions
as committed in the notification queue, and
- Joel Jacobson for the final patch version. I hope I didn't forget
anyone.
Backpatch to all supported versions. I believe the bug goes back all
the way to commit d1e027221d, which introduced the SLRU-based async
notification queue.
Discussion: https://www.postgresql.org/message-id/16961-25f29f95b3604a8a@postgresql.org
Discussion: https://www.postgresql.org/message-id/18804-bccbbde5e77a68c2@postgresql.org
Discussion: https://www.postgresql.org/message-id/CAK98qZ3wZLE-RZJN_Y%2BTFjiTRPPFPBwNBpBi5K5CU8hUHkzDpw@mail.gmail.com
Backpatch-through: 14
Previously, if async notify processing encountered an error, we would
report the error to the client and advance our read position past the
offending entry to prevent trying to process it over and over
again. Trying to continue after an error has a few problems however:
- We have no way of telling the client that a notification was
lost. They get an ERROR, but that doesn't tell you much. As such,
it's not clear if keeping the connection alive after losing a
notification is a good thing. Depending on the application logic,
missing a notification could cause the application to get stuck
waiting, for example.
- If the connection is idle, PqCommReadingMsg is set and any ERROR is
turned into FATAL anyway.
- We bailed out of the notification processing loop on first error
without processing any subsequent notifications. The subsequent
notifications would not be processed until another notify interrupt
arrives. For example, if there were two notifications pending, and
processing the first one caused an ERROR, the second notification
would not be processed until someone sent a new NOTIFY.
This commit changes the behavior so that any ERROR while processing
async notifications is turned into FATAL, causing the client
connection to be terminated. That makes the behavior more consistent
as that's what happened in idle state already, and terminating the
connection is a clear signal to the application that it might've
missed some notifications.
The reason to do this now is that the next commits will change the
notification processing code in a way that would make it harder to
skip over just the offending notification entry on error.
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://www.postgresql.org/message-id/fedbd908-4571-4bbe-b48e-63bfdcc38f64@iki.fi
Backpatch-through: 14
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
Several functions could overflow their size calculations, when presented
with very large inputs from remote and/or untrusted locations, and then
allocate buffers that were too small to hold the intended contents.
Switch from int to size_t where appropriate, and check for overflow
conditions when the inputs could have plausibly originated outside of
the libpq trust boundary. (Overflows from within the trust boundary are
still possible, but these will be fixed separately.) A version of
add_size() is ported from the backend to assist with code that performs
more complicated concatenation.
Reported-by: Aleksey Solovev (Positive Technologies)
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12818
Backpatch-through: 13
generic-gcc.h maps our read and write barriers to C11 acquire and
release fences using compiler builtins, for platforms where we don't
have our own hand-rolled assembler. This is apparently enough for GCC,
but the C11 memory model is only defined in terms of atomic accesses,
and our barriers for non-atomic, non-volatile accesses were not always
respected under Clang's stricter interpretation of the standard.
This explains the occasional breakage observed on new RISC-V + Clang
animal greenfly in lock-free PgAioHandle manipulation code containing a
repeating pattern of loads and read barriers. The problem can also be
observed in code generated for MIPS and LoongAarch, though we aren't
currently testing those with Clang, and on x86, though we use our own
assembler there. The scariest aspect is that we use the generic version
on very common ARM systems, but it doesn't seem to reorder the relevant
code there (or we'd have debugged this long ago).
Fix by inserting an explicit compiler barrier. It expands to an empty
assembler block declared to have memory side-effects, so registers are
flushed and reordering is prevented. In those respects this is like the
architecture-specific assembler versions, but the compiler is still in
charge of generating the appropriate fence instruction. Done for write
barriers on principle, though concrete problems have only been observed
with read barriers.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d79691be-22bd-457d-9d90-18033b78c40a%40gmail.com
Backpatch-through: 13
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
The test introduced by 17b2d5ec759c verifies that a WAL receiver
survives across a timeline jump by searching the server logs for
termination messages. However, it called restart() before the timeline
switch, which kills the WAL receiver and may log the exact message being
checked, hence failing the test. As TAP tests reuse the same log file
across restarts, a rotate_logfile() is used before the restart so as the
log matching check is not impacted by log entries generated by a
previous shutdown.
Recent changes to file handle inheritance altered I/O timing enough to
make this fail consistently while testing another patch.
While on it, this adds an extra check based on a PID comparison. This
test may lead to false positives as it could be possible that the WAL
receiver has processed a timeline jump before the initial PID is
grabbed, but it should be good enough in most cases.
Like 17b2d5ec759c, backpatch down to v13.
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/9d00b597-d64a-4f1e-802e-90f9dc394c70@gmail.com
Backpatch-through: 13
In 2a0faed9d702, which added JIT compilation support for expressions, I
accidentally used sizeof(LLVMBasicBlockRef *) instead of
sizeof(LLVMBasicBlockRef) as part of computing the size of an allocation. That
turns out to have no real negative consequences due to LLVMBasicBlockRef being
a pointer itself (and thus having the same size). It still is wrong and
confusing, so fix it.
Reported by coverity.
Backpatch-through: 13
Commit a95e3d84c0e0 added ActiveSnapshot push+pop when processing
work-items (BRIN autosummarization), but forgot to handle the case of
a transaction failing during the run, which drops the snapshot untimely.
Fix by making the pop conditional on an element being actually there.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511041648.nofajnuddmwk@alvherre.pgsql
Backpatch commit 7bc9a8bdd2d to 13-17. The motivation for backpatching is that
we want to update CI to Debian Trixie. Trixie contains a newer mingw
installation, which would trigger the warning addressed by 7bc9a8bdd2d. The
risk of backpatching seems fairly low, given that it did not cause issues in
the branches the commit is already present.
While CI is not present in 13-14, it seems better to be consistent across
branches.
Author: Thomas Munro <tmunro@postgresql.org>
Discussion: https://postgr.es/m/o5yadhhmyjo53svzwvaocww6zkrp63i4f32cw3treuh46pxtza@hyqio5b2tkt6
Backpatch-through: 13
It's possible to define BRIN indexes on functions that require a
snapshot to run, but the autosummarization feature introduced by commit
7526e10224f0 fails to provide one. This causes autovacuum to leave a
BRIN placeholder tuple behind after a failed work-item execution, making
such indexes less efficient. Repair by obtaining a snapshot prior to
running the task, and add a test to verify this behavior.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: Giovanni Fabris <giovanni.fabris@icon.it>
Reported-by: Arthur Nascimento <tureba@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511031106.h4fwyuyui6fz@alvherre.pgsql
Commit b4f584f9d2a1 (affecting v15~, later backpatched down to 13 as of
3635a0a35aaf) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2a1: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
The C standard says that the second and third arguments of a
conditional operator shall be both void type or both not-void
type. The Windows version of INTERRUPTS_PENDING_CONDITION()
got this wrong. It's pretty harmless because the result of
the operator is ignored anyway, but apparently recent versions
of MSVC have started issuing a warning about it. Silence the
warning by casting the dummy zero to void.
Reported-by: Christian Ullrich <chris@chrullrich.net>
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/cc4ef8db-f8dc-4347-8a22-e7ebf44c0308@chrullrich.net
Backpatch-through: 13
This commit reverts 818fefd8fd4, that has been introduced to address a
an instability in some of the TAP tests due to the presence of random
standby snapshot WAL records, when slots are invalidated by
InvalidatePossiblyObsoleteSlot().
Anyway, this commit had also the consequence of introducing a behavior
regression. After 818fefd8fd4, the code may determine that a slot needs
to be invalidated while it may not require one: the slot may have moved
from a conflicting state to a non-conflicting state between the moment
when the mutex is released and the moment when we recheck the slot, in
InvalidatePossiblyObsoleteSlot(). Hence, the invalidations may be more
aggressive than they actually have to.
105b2cb3361 has tackled the test instability in a way that should be
hopefully sufficient for the buildfarm, even for slow members:
- In v18, the test relies on an injection point that bypasses the
creation of the random records generated for standby snapshots,
eliminating the random factor that impacted the test. This option was
not available when 818fefd8fd4 was discussed.
- In v16 and v17, the problem was bypassed by disallowing a slot to
become active in some of the scenarios tested.
While on it, this commit adds a comment to document that it is fine for
a recheck to use xmin and LSN values stored in the slot, without storing
and reusing them across multiple checks.
Reported-by: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/f492465f-657e-49af-8317-987460cb68b0.mengjuan.cmj@alibaba-inc.com
Backpatch-through: 16
Because long is 32-bit on 64-bit Windows, it isn't a good datatype to
store the difference between 2 pointers. The under-sized type could
overflow and lead to scary warnings in MEMORY_CONTEXT_CHECKING builds,
such as:
WARNING: problem in alloc set ExecutorState: bad single-chunk %p in block %p
However, the problem lies only in the code running the check, not from
an actual memory accounting bug.
Fix by using "Size" instead of "long". This means using an unsigned
type rather than the previous signed type. If the block's freeptr was
corrupted, we'd still catch that if the unsigned type wrapped. Unsigned
allows us to avoid further needless complexities around comparing signed
and unsigned types.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 13
Discussion: https://postgr.es/m/CAApHDvo-RmiT4s33J=aC9C_-wPZjOXQ232V-EZFgKftSsNRi4w@mail.gmail.com
When dealing with ResultRelInfos for partitions, there are cases where
there are mixed requirements for the ri_RootResultRelInfo. There are
cases when the partition itself requires a NULL ri_RootResultRelInfo and
in the same query, the same partition may require a ResultRelInfo with
its parent set in ri_RootResultRelInfo. This could cause the column
mapping between the partitioned table and the partition not to be done
which could result in crashes if the column attnums didn't match
exactly.
The fix is simple. We now check that the ri_RootResultRelInfo matches
what the caller passed to ExecGetTriggerResultRel() and only return a
cached ResultRelInfo when the ri_RootResultRelInfo matches what the
caller wants, otherwise we'll make a new one.
Author: David Rowley <dgrowleyml@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reported-by: Dmitry Fomin <fomin.list@gmail.com>
Discussion: https://postgr.es/m/7DCE78D7-0520-4207-822B-92F60AEA14B4@gmail.com
Backpatch-through: 15
These two functions expect there to be room to insert another item
in the FreePageBtree's array, but their assertions were too weak
to guarantee that. This has little practical effect granting that
the callers are not buggy, but it seems to be misleading late-model
Coverity into complaining about possible array overrun.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/799984.1761150474@sss.pgh.pa.us
Backpatch-through: 13
Commit c6f7f11d8 intended to prevent leaking any PyObject reference
counts in edge cases (such as out-of-memory during string
construction), but actually it introduced a leak in the normal case.
Repeating an error-trapping operation often enough would lead to
session-lifespan memory bloat. The problem is that I failed to
think about the fact that PyObject_GetAttrString() increments the
refcount of the returned PyObject, so that simply walking down the
list of error frame objects causes all but the first one to have
their refcount incremented.
I experimented with several more-or-less-complex ways around that,
and eventually concluded that the right fix is simply to drop the
newly-obtained refcount as soon as we walk to the next frame
object in PLy_traceback. This sounds unsafe, but it's perfectly
okay because the caller holds a refcount on the first frame object
and each frame object holds a refcount on the next one; so the
current frame object can't disappear underneath us.
By the same token, we can simplify the caller's cleanup back to
simply dropping its refcount on the first object. Cleanup of
each frame object will lead in turn to the refcount of the next
one going to zero.
I also added a couple of comments explaining why PLy_elog_impl()
doesn't try to free the strings acquired from PLy_get_spi_error_data()
or PLy_get_error_data(). That's because I got here by looking at a
Coverity complaint about how those strings might get leaked. They
are not leaked, but in testing that I discovered this other leak.
Back-patch, as c6f7f11d8 was. It's a bit nervous-making to be
putting such a fix into v13, which is only a couple weeks from its
final release; but I can't see that leaving a recently-introduced
leak in place is a better idea.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1203918.1761184159@sss.pgh.pa.us
Backpatch-through: 13
Commit 883a95646a8 introduced overflow entries in the replication lag tracker
to fix an issue where lag columns in pg_stat_replication could stall when
the replay LSN stopped advancing.
This commit adds comments clarifying the purpose and behavior of overflow
entries to improve code readability and understanding.
Since commit 883a95646a8 was recently applied and backpatched to all
supported branches, this follow-up commit is also backpatched accordingly.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CABPTF7VxqQA_DePxyZ7Y8V+ErYyXkmwJ1P6NC+YC+cvxMipWKw@mail.gmail.com
Backpatch-through: 13
When JIT deformed tuples (controlled via the jit_tuple_deforming GUC),
types narrower than sizeof(Datum) would be zero-extended up to Datum
width. This wasn't the same as what fetch_att() does in the standard
tuple deforming code. Logically the values are the same when fetching
via the DatumGet*() marcos, but negative numbers are not the same in
binary form.
In the report, the problem was manifesting itself with:
ERROR: could not find memoization table entry
in a query which had a "Cache Mode: binary" Memoize node. However, it's
currently unclear what else is affected. Anything that uses
datum_image_eq() or datum_image_hash() on a Datum from a tuple deformed by
JIT could be affected, but it may not be limited to that.
The fix for this is simple: use signed extension instead of zero
extension.
Many thanks to Emmanuel Touzery for reporting this issue and providing
steps and backup which allowed the problem to easily be recreated.
Reported-by: Emmanuel Touzery <emmanuel.touzery@plandela.si>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/DB8P194MB08532256D5BAF894F241C06393F3A@DB8P194MB0853.EURP194.PROD.OUTLOOK.COM
Backpatch-through: 13
Previously, if primary_slot_name was set to an invalid slot name and
the configuration file was reloaded, both the postmaster and all other
backend processes reported a WARNING. With many processes running,
this could produce a flood of duplicate messages. The problem was that
the GUC check hook for primary_slot_name reported errors at WARNING
level via ereport().
This commit changes the check hook to use GUC_check_errdetail() and
GUC_check_errhint() for error reporting. As with other GUC parameters,
this causes non-postmaster processes to log the message at DEBUG3,
so by default, only the postmaster's message appears in the log file.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFud-cvthCTfusBfKHBS6Jj6kdAPTdLWKvP2qjUX6L_wA@mail.gmail.com
Backpatch-through: 13
Previously, when the replay LSN reported in feedback messages from a standby
stopped advancing, for example, due to a recovery conflict, the write_lag and
flush_lag columns in pg_stat_replication would initially update but then stop
progressing. This prevented users from correctly monitoring replication lag.
The problem occurred because when any LSN stopped updating, the lag tracker's
cyclic buffer became full (the write head reached the slowest read head).
In that state, the lag tracker could no longer compute round-trip lag values
correctly.
This commit fixes the issue by handling the slowest read entry (the one
causing the buffer to fill) as a separate overflow entry and freeing space
so the write and other read heads can continue advancing in the buffer.
As a result, write_lag and flush_lag now continue updating even if the reported
replay LSN remains stalled.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwGdGQ=1-X-71Caee-LREBUXSzyohkoQJd4yZZCMt24C0g@mail.gmail.com
Backpatch-through: 13
