Since the existing bit number argument can't exceed INT32_MAX, it's
not possible for these functions to manipulate bits beyond the first
256MB of a bytea value. Lift that restriction by redeclaring the
bit number arguments as int8 (which requires a catversion bump,
hence is not back-patchable).
The similarly-named functions for bit/varbit don't really have a
problem because we restrict those types to at most VARBITMAXLEN bits;
hence leave them alone.
While here, extend the encode/decode functions in utils/adt/encode.c
to allow dealing with values wider than 1GB. This is not a live bug
or restriction in current usage, because no input could be more than
1GB, and since none of the encoders can expand a string more than 4X,
the result size couldn't overflow uint32. But it might be desirable
to support more in future, so make the input length values size_t
and the potential-output-length values uint64.
Also add some test cases to improve the miserable code coverage
of these functions.
Movead Li, editorialized some by me; also reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/20200312115135445367128@highgo.ca
It turns out that the code did indeed rely on a zeroed
TuplesortInstrumentation.sortMethod field to indicate
"this worker never did anything", although it seems the
issue only comes up during certain race-condition-y cases.
Hence, rearrange the TuplesortMethod enum to restore
SORT_TYPE_STILL_IN_PROGRESS to having the value zero,
and add some comments reinforcing that that isn't optional.
Also future-proof a loop over the possible values of the enum.
sizeof(bits32) happened to be the correct limit value,
but only by purest coincidence.
Per buildfarm and local investigation.
Discussion: https://postgr.es/m/12222.1586223974@sss.pgh.pa.us
Incremental Sort is an optimized variant of multikey sort for cases when
the input is already sorted by a prefix of the requested sort keys. For
example when the relation is already sorted by (key1, key2) and we need
to sort it by (key1, key2, key3) we can simply split the input rows into
groups having equal values in (key1, key2), and only sort/compare the
remaining column key3.
This has a number of benefits:
- Reduced memory consumption, because only a single group (determined by
values in the sorted prefix) needs to be kept in memory. This may also
eliminate the need to spill to disk.
- Lower startup cost, because Incremental Sort produce results after each
prefix group, which is beneficial for plans where startup cost matters
(like for example queries with LIMIT clause).
We consider both Sort and Incremental Sort, and decide based on costing.
The implemented algorithm operates in two different modes:
- Fetching a minimum number of tuples without check of equality on the
prefix keys, and sorting on all columns when safe.
- Fetching all tuples for a single prefix group and then sorting by
comparing only the remaining (non-prefix) keys.
We always start in the first mode, and employ a heuristic to switch into
the second mode if we believe it's beneficial - the goal is to minimize
the number of unnecessary comparions while keeping memory consumption
below work_mem.
This is a very old patch series. The idea was originally proposed by
Alexander Korotkov back in 2013, and then revived in 2017. In 2018 the
patch was taken over by James Coleman, who wrote and rewrote most of the
current code.
There were many reviewers/contributors since 2013 - I've done my best to
pick the most active ones, and listed them in this commit message.
Author: James Coleman, Alexander Korotkov
Reviewed-by: Tomas Vondra, Andreas Karlsson, Marti Raudsepp, Peter Geoghegan, Robert Haas, Thomas Munro, Antonin Houska, Andres Freund, Alexander Kuzmenkov
Discussion: https://postgr.es/m/CAPpHfdscOX5an71nHd8WSUH6GNOCf=V7wgDaTXdDd9=goN-gfA@mail.gmail.com
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
A table rewritten by ALTER TABLE would lose tracking of an index usable
for CLUSTER. This setting is tracked by pg_index.indisclustered and is
controlled by ALTER TABLE, so some extra work was needed to restore it
properly. Note that ALTER TABLE only marks the index that can be used
for clustering, and does not do the actual operation.
Author: Amit Langote, Justin Pryzby
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/20200202161718.GI13621@telsasoft.com
Backpatch-through: 9.5
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This patch replaces the boolean GUC log_parameters_on_error introduced
by commit ba79cb5dc with an integer log_parameter_max_length_on_error,
adding the ability to specify how many bytes to trim each logged
parameter value to. (The previous coding hard-wired that choice at
64 bytes.)
In addition, add a new parameter log_parameter_max_length that provides
similar control over truncation of query parameters that are logged in
response to statement-logging options, as opposed to errors. Previous
releases always logged such parameters in full, possibly causing log
bloat.
For backwards compatibility with prior releases,
log_parameter_max_length defaults to -1 (log in full), while
log_parameter_max_length_on_error defaults to 0 (no logging).
Per discussion, log_parameter_max_length is SUSET since the DBA should
control routine logging behavior, but log_parameter_max_length_on_error
is USERSET because it also affects errcontext data sent back to the
client.
Alexey Bashtanov, editorialized a little by me
Discussion: https://postgr.es/m/b10493cc-a399-a03a-67c7-068f2791ee50@imap.cc
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
Buildfarm experience shows what probably should've occurred to me before:
if a cache flush occurs partway through building a generic plan, then
the plansource may have is_valid = false even though the plan is valid.
We need to accept this case, use the generated plan, and then try to
replan the next time. We can't try to replan immediately, because that
would produce an infinite loop in CLOBBER_CACHE_ALWAYS builds; moreover
it's really overkill. (We can assume that the plan is valid, it's just
possibly a bit stale. Note that the pre-existing code behaved this way,
and the non-simple-expression code paths do too.) Conversely, not using
the generated plan would drop us into the not-a-simple-expression code
path, which is bad for performance and would also cause regression-test
failures due to visibly different error-reporting behavior.
Hence, refactor the validity-check functions so that the initial check
and recheck cases can react differently to plansource->is_valid.
This makes their usage a bit simpler, too.
Discussion: https://postgr.es/m/7072.1585332104@sss.pgh.pa.us
For relatively simple expressions (say, "x + 1" or "x > 0"), plpgsql's
management overhead exceeds the cost of evaluating the expression.
This patch substantially improves that situation, providing roughly
2X speedup for such trivial expressions.
First, add infrastructure in the plancache to allow fast re-validation
of cached plans that contain no table access, and hence need no locks.
Teach plpgsql to use this infrastructure for expressions that it's
already deemed "simple" (which in particular will never contain table
references).
The fast path still requires checking that search_path hasn't changed,
so provide a fast path for OverrideSearchPathMatchesCurrent by
counting changes that have occurred to the active search path in the
current session. This is simplistic but seems enough for now, seeing
that PushOverrideSearchPath is not used in any performance-critical
cases.
Second, manage the refcounts on simple expressions' cached plans using
a transaction-lifespan resource owner, so that we only need to take
and release an expression's refcount once per transaction not once per
expression evaluation. The management of this resource owner exactly
parallels the existing management of plpgsql's simple-expression EState.
Add some regression tests covering this area, in particular verifying
that expression caching doesn't break semantics for search_path changes.
Patch by me, but it owes something to previous work by Amit Langote,
who recognized that getting rid of plancache-related overhead would
be a useful thing to do here. Also thanks to Andres Freund for review.
Discussion: https://postgr.es/m/CAFj8pRDRVfLdAxsWeVLzCAbkLFZhW549K+67tpOc-faC8uH8zw@mail.gmail.com
This reverts the parts of commit 17a28b03645e27d73bf69a95d7569b61e58f06eb
that changed ereport's auxiliary functions from returning dummy integer
values to returning void. It turns out that a minority of compilers
complain (not entirely unreasonably) about constructs such as
(condition) ? errdetail(...) : 0
if errdetail() returns void rather than int. We could update those
call sites to say "(void) 0" perhaps, but the expectation for this
patch set was that ereport callers would not have to change anything.
And this aspect of the patch set was already the most invasive and
least compelling part of it, so let's just drop it.
Per buildfarm.
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Change all the auxiliary error-reporting routines to return void,
now that we no longer need to pretend they are passing something
useful to errfinish(). While this probably doesn't save anything
significant at the machine-code level, it allows detection of some
additional types of mistakes.
Pass the error location details (__FILE__, __LINE__, PG_FUNCNAME_MACRO)
to errfinish not errstart. This shaves a few cycles off the case where
errstart decides we're not going to emit anything.
Re-implement elog() as a trivial wrapper around ereport(), removing
the separate support infrastructure it used to have. Aside from
getting rid of some now-surplus code, this means that elog() now
really does have exactly the same semantics as ereport(), in particular
that it can skip evaluation work if the message is not to be emitted.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Now that we require C99, we can depend on __VA_ARGS__ to work, and
revising ereport() to use it has several significant benefits:
* The extra parentheses around the auxiliary function calls are now
optional. Aside from being a bit less ugly, this removes a common
gotcha for new contributors, because in some cases the compiler errors
you got from forgetting them were unintelligible.
* The auxiliary function calls are now evaluated as a comma expression
list rather than as extra arguments to errfinish(). This means that
compilers can be expected to warn about no-op expressions in the list,
allowing detection of several other common mistakes such as forgetting
to add errmsg(...) when converting an elog() call to ereport().
* Unlike the situation with extra function arguments, comma expressions
are guaranteed to be evaluated left-to-right, so this removes platform
dependency in the order of the auxiliary function calls. While that
dependency hasn't caused us big problems in the past, this change does
allow dropping some rather shaky assumptions around errcontext() domain
handling.
There's no intention to make wholesale changes of existing ereport
calls, but as proof-of-concept this patch removes the extra parens
from a couple of calls in postgres.c.
While new code can be written either way, code intended to be
back-patched will need to use extra parens for awhile yet. It seems
worth back-patching this change into v12, so as to reduce the window
where we have to be careful about that by one year. Hence, this patch
is careful to preserve ABI compatibility; a followup HEAD-only patch
will make some additional simplifications.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
This reverts commit cb2fd7eac285b1b0a24eeb2b8ed4456b66c5a09f. Per
numerous buildfarm members, it was incompatible with parallel query, and
a test case assumed LP64. Back-patch to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20200321224920.GB1763544@rfd.leadboat.com
headerscheck and cpluspluscheck should skip the recently-added
cmdtaglist.h header, since (like kwlist.h and some other similarly-
designed headers) it's not meant to be included standalone.
evtcache.h was missing an #include to support its usage of Bitmapset.
typecmds.h was missing an #include to support its usage of ParseState.
The first two of these were evidently oversights in commit 2f9661311.
I didn't track down exactly which change broke typecmds.h, but it
must have been some rearrangement in one of its existing inclusions,
because it's referenced ParseState for quite a long time and there
were not complaints from these checking programs before.
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Remove an obsolete comment from AtEOXact_cleanup(). Restore formatting
of a comment in struct RelationData, mangled by the pgindent run in
commit 9af4159fce6654aa0e081b00d02bca40b978745c. Back-patch to 9.5 (all
supported versions), because another fix stacks on this.
Introduce a GUC and a tablespace option to control I/O prefetching, much
like effective_io_concurrency, but for work that is done on behalf of
many client sessions.
Use the new setting in heapam.c instead of the hard-coded formula
effective_io_concurrency + 10 introduced by commit 558a9165e08. Go with
a default value of 10 for now, because it's a round number pretty close
to the value used for that existing case.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
This catalog-handling code was previously together with the rest of
CastCreate() in src/backend/commands/functioncmds.c. A future patch
will need a way to add casts internally, so this will be useful to have
separate.
Also, move the nearby get_cast_oid() function from functioncmds.c to
lsyscache.c, which seems a more natural place for it.
Author: Paul Jungwirth, minor edits by Álvaro
Discussion: https://postgr.es/m/20200309210003.GA19992@alvherre.pgsql
Such indexes can only be duplicated leftovers of a previously failed
REINDEX CONCURRENTLY command, and a valid equivalent is guaranteed to
exist. As toast indexes can only be dropped if invalid, reindexing
these would lead to useless duplicated indexes that can't be dropped
anymore, except if the parent relation is dropped.
Thanks to Justin Pryzby for reminding that this problem was reported
long ago during the review of the original patch of REINDEX
CONCURRENTLY, but the issue was never addressed.
Reported-by: Sergei Kornilov, Justin Pryzby
Author: Julien Rouhaud
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/36712441546604286%40sas1-890ba5c2334a.qloud-c.yandex.net
Discussion: https://postgr.es/m/20200216190835.GA21832@telsasoft.com
Backpatch-through: 12
Increases the number of tapes in a logical tape set. This will be
important for disk-based hash aggregation, because the maximum number
of tapes is not known ahead of time.
While discussing this change, it was observed to regress the
performance of Sort for at least one test case. The performance
regression was because some versions of GCC switch to an inlined
version of memcpy() in LogicalTapeWrite() after this change. No
performance regression for clang was observed.
Because the regression is due to an arbitrary decision by the
compiler, I decided it shouldn't hold up this change. If it needs to
be fixed, we can find a workaround.
Author: Adam Lee, Jeff Davis
Discussion: https://postgr.es/m/e54bfec11c59689890f277722aaaabd05f78e22c.camel%40j-davis.com
Specifically, this patch allows ALTER TYPE to:
* Change the default TOAST strategy for a toastable base type;
* Promote a non-toastable type to toastable;
* Add/remove binary I/O functions for a type;
* Add/remove typmod I/O functions for a type;
* Add/remove a custom ANALYZE statistics functions for a type.
The first of these can be done by the type's owner; all the others
require superuser privilege since misuse could cause problems.
The main motivation for this patch is to allow extensions to
upgrade the feature sets of their data types, so the set of
alterable properties is biased towards that use-case. However
it's also true that changing some other properties would be
a lot harder, as they get baked into physical storage and/or
stored expressions that depend on the type.
Along the way, refactor GenerateTypeDependencies() to make it easier
to call, refactor DefineType's volatility checks so they can be shared
by AlterType, and teach typcache.c that it might have to reload data
from the type's pg_type row, a scenario it never handled before.
Also rearrange alter_type.sgml a bit for clarity (put the
composite-type operations together).
Tomas Vondra and Tom Lane
Discussion: https://postgr.es/m/20200228004440.b23ein4qvmxnlpht@development
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
to_char() has long allowed the TM (translation mode) prefix to
specify output of translated month or day names; but that prefix
had no effect in input format strings. Now it does. to_date()
and to_timestamp() will now recognize the same month or day names
that to_char() would output for the same format code. Matching is
case-insensitive (per the active collation's notion of what that
means), just as it has always been for English month/day names
without the TM prefix.
(As per the discussion thread, there are lots of cases that this
feature will not handle, such as alternate day names. But being
able to accept what to_char() will output seems useful enough.)
In passing, fix some shaky English and violations of message
style guidelines in jsonpath errors for the .datetime() method,
which depends on this code.
Juan José Santamaría Flecha, reviewed and modified by me,
with other commentary from Alvaro Herrera, Tomas Vondra,
Arthur Zakirov, Peter Eisentraut, Mark Dilger.
Discussion: https://postgr.es/m/CAC+AXB3u1jTngJcoC1nAHBf=M3v-jrEfo86UFtCqCjzbWS9QhA@mail.gmail.com
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
hash_any() and its various variants are defined to return Datum,
which is a backend-only concept, but the underlying functions
actually want to return uint32 and uint64, and only return Datum
because it's convenient for callers who are using them to
implement a hash function for some SQL datatype.
However, changing these functions to return uint32 and uint64
seems like it might lead to programming errors or back-patching
difficulties, both because they are widely used and because
failure to use UInt{32,64}GetDatum() might not provoke a
compilation error. Instead, rename the existing functions as
well as changing the return type, and add static inline wrappers
for those callers that need the previous behavior.
Although this commit adapts hashutils.h and hashfn.c so that they
can be compiled as frontend code, it does not actually do
anything that would cause them to be so compiled. That is left
for another commit.
Patch by me, reviewed by Suraj Kharage and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
The closely-related function bms_hash_value is already defined in that
file, and this change means that hashfn.c no longer needs to depend on
nodes/bitmapset.h. That gets us closer to allowing use of the hash
functions in hashfn.c in frontend code.
Patch by me, reviewed by Suraj Kharage and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Commit 6bf0bc842 replaced float.c's CHECKFLOATVAL() macro with static
inline subroutines, but that wasn't too well thought out. In the original
coding, the unlikely condition (isinf(result) or result == 0) was checked
first, and the inf_is_valid or zero_is_valid condition only afterwards.
The inline-subroutine coding caused that to be swapped around, which is
pretty horrid for performance because (a) in common cases the is_valid
condition is twice as expensive to evaluate (e.g., requiring two isinf()
calls not one) and (b) in common cases the is_valid condition is false,
requiring us to perform the unlikely-condition check anyway. Net result
is that one isinf() call becomes two or three, resulting in visible
performance loss as reported by Keisuke Kuroda.
The original fix proposal was to revert the replacement of the macro,
but on second thought, that macro was just a bad idea from the beginning:
if anything it's a net negative for readability of the code. So instead,
let's just open-code all the overflow/underflow tests, being careful to
test the unlikely condition first (and mark it unlikely() to help the
compiler get the point).
Also, rather than having N copies of the actual ereport() calls, collapse
those into out-of-line error subroutines to save some code space. This
does mean that the error file/line numbers won't be very helpful for
figuring out where the issue really is --- but we'd already burned that
bridge by putting the ereports into static inlines.
In HEAD, check_float[48]_val() are gone altogether. In v12, leave them
present in float.h but unused in the core code, just in case some
extension is depending on them.
Emre Hasegeli, with some kibitzing from me and Andres Freund
Discussion: https://postgr.es/m/CANDwggLe1Gc1OrRqvPfGE=kM9K0FSfia0hbeFCEmwabhLz95AA@mail.gmail.com
Using a lookup table of digit pairs reduces the number of divisions
needed, and calculating the length upfront saves some work; these
ideas are taken from the code previously committed for floats.
David Fetter, reviewed by Kyotaro Horiguchi, Tels, and me.
Discussion: https://postgr.es/m/20190924052620.GP31596%40fetter.org
Commit fc7695891 changed CheckAttributeType to recurse into ranges,
but made it pass down the wrong collation (always InvalidOid, since
ranges as such have no collation). This would result in guaranteed
failure when considering a range type whose subtype is collatable.
Embarrassingly, we lack any regression tests that would expose such
a problem (but fortunately, somebody noticed before we shipped this
bug in any release).
Fix it to pass down the range's subtype collation property instead,
and add some regression test cases to exercise collatable-subtype
ranges a bit more. Back-patch to all supported branches, as the
previous patch was.
Report and patch by Julien Rouhaud, test cases tweaked by me
Discussion: https://postgr.es/m/CAOBaU_aBWqNweiGUFX0guzBKkcfJ8mnnyyGC_KBQmO12Mj5f_A@mail.gmail.com
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Specifically, move those functions that depend on ereport()
from jsonapi.c to jsonfuncs.c, in preparation for allowing
jsonapi.c to be used from frontend code.
A few cases where elog(ERROR, ...) is used for can't-happen
conditions are left alone; we can handle those in some other
way in frontend code.
Reviewed by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Instead, it now returns a value indicating either success or the
type of error which occurred. The old behavior is still available
by calling pg_parse_json_or_ereport(). If the new interface is
used, an error can be thrown by passing the return value of
pg_parse_json() to json_ereport_error().
pg_parse_json() can still elog() in can't-happen cases, but it
seems like that issue is best handled separately.
Adjust json_lex() and json_count_array_elements() to return an
error code, too.
This is all in preparation for making the backend's json parser
available to frontend code.
Reviewed and/or tested by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Keep the code that pertains to the 'json' data type in json.c, but
move the lexing and parsing code to a new file jsonapi.c, a name
I chose because the corresponding prototypes are in jsonapi.h.
This seems like a logical division, because the JSON lexer and parser
are also used by the 'jsonb' data type, but the SQL-callable functions
in json.c are a separate thing. Also, the new jsonapi.c file needs to
include far fewer header files than json.c, which seems like a good
sign that this is an appropriate place to insert an abstraction
boundary. I took the opportunity to remove a few apparently-unneeded
includes from json.c at the same time.
Patch by me, reviewed by David Steele, Mark Dilger, and Andrew
Dunstan. The previous commit was, too, but I forgot to note it
in the commit message.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
The major change here is that we no longer include jsonb.h into
jsonapi.h. The reason that was necessary is that jsonapi.h included
several prototypes functions in jsonfuncs.c that depend on the Jsonb
type. Move those prototypes to a new header, jsonfuncs.h, and include
it where needed.
The other change is that JsonEncodeDateTime is now declared in
json.h rather than jsonapi.h.
Taken together, these steps eliminate all dependencies of jsonapi.h
on backend-only data types and header files, so that it can
potentially be included in frontend code.
This uses the progress reporting infrastructure added by c16dc1aca5e0,
adding support for ANALYZE.
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Co-authored-by: Tatsuro Yamada <tatsuro.yamada.tf@nttcom.co.jp>
Reviewed-by: Julien Rouhaud, Robert Haas, Anthony Nowocien, Kyotaro Horiguchi,
Vignesh C, Amit Langote
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
Formerly the rd_partkey and rd_partdesc data structures were always
populated immediately when a relcache entry was built or rebuilt.
This patch changes things so that they are populated only when they
are first requested. (Hence, callers *must* now always use
RelationGetPartitionKey or RelationGetPartitionDesc; just fetching
the pointer directly is no longer acceptable.)
This seems to have some performance benefits, but the main reason to do
it is that it eliminates a recursive-reload failure that occurs if the
partkey or partdesc expressions contain any references to the relation's
rowtype (as discovered by Amit Langote). In retrospect, since loading
these data structures might result in execution of nearly-arbitrary code
via eval_const_expressions, it was a dumb idea to require that to happen
during relcache entry rebuild.
Also, fix things so that old copies of a relcache partition descriptor
will be dropped when the cache entry's refcount goes to zero. In the
previous coding it was possible for such copies to survive for the
lifetime of the session, as I'd complained of in a previous discussion.
(This management technique still isn't perfect, but it's better than
before.) Improve the commentary explaining how that works and why
it's safe to hand out direct pointers to these relcache substructures.
In passing, improve RelationBuildPartitionDesc by using the same
memory-context-parent-swap approach used by RelationBuildPartitionKey,
thereby making it less dependent on strong assumptions about what
partition_bounds_copy does. Avoid doing get_rel_relkind in the
critical section, too.
Patch by Amit Langote and Tom Lane; Robert Haas deserves some credit
for prior work in the area, too. Although this is a pre-existing
problem, no back-patch: the patch seems too invasive to be safe to
back-patch, and the bug it fixes is a corner case that seems
relatively unlikely to cause problems in the field.
Discussion: https://postgr.es/m/CA+HiwqFUzjfj9HEsJtYWcr1SgQ_=iCAvQ=O2Sx6aQxoDu4OiHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoY3bRmGB6-DUnoVy5fJoreiBJ43rwMrQRCdPXuKt4Ykaw@mail.gmail.com
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
This patch causes EXPLAIN to always assign a separate table alias to the
parent RTE of an append relation (inheritance set); before, such RTEs
were ignored if not actually scanned by the plan. Since the child RTEs
now always have that same alias to start with (cf. commit 55a1954da),
the net effect is that the parent RTE usually gets the alias used or
implied by the query text, and the children all get that alias with "_N"
appended. (The exception to "usually" is if there are duplicate aliases
in different subtrees of the original query; then some of those original
RTEs will also have "_N" appended.)
This results in more uniform output for partitioned-table plans than
we had before: the partitioned table itself gets the original alias,
and all child tables have aliases with "_N", rather than the previous
behavior where one of the children would get an alias without "_N".
The reason for giving the parent RTE an alias, even if it isn't scanned
by the plan, is that we now use the parent's alias to qualify Vars that
refer to an appendrel output column and appear above the Append or
MergeAppend that computes the appendrel. But below the append, Vars
refer to some one of the child relations, and are displayed that way.
This seems clearer than the old behavior where a Var that could carry
values from any child relation was displayed as if it referred to only
one of them.
While at it, change ruleutils.c so that the code paths used by EXPLAIN
deal in Plan trees not PlanState trees. This effectively reverts a
decision made in commit 1cc29fe7c, which seemed like a good idea at
the time to make ruleutils.c consistent with explain.c. However,
it's problematic because we'd really like to allow executor startup
pruning to remove all the children of an append node when possible,
leaving no child PlanState to resolve Vars against. (That's not done
here, but will be in the next patch.) This requires different handling
of subplans and initplans than before, but is otherwise a pretty
straightforward change.
Discussion: https://postgr.es/m/001001d4f44b$2a2cca50$7e865ef0$@lab.ntt.co.jp
This makes such log entries more useful, since the cause of the error
can be dependent on the parameter values.
Author: Alexey Bashtanov, Álvaro Herrera
Discussion: https://postgr.es/m/0146a67b-a22a-0519-9082-bc29756b93a2@imap.cc
Reviewed-by: Peter Eisentraut, Andres Freund, Tom Lane
