This commit adds fmtIdEnc() and fmtQualifiedIdEnc(), which allow to specify
the encoding as an explicit argument. Additionally setFmtEncoding() is
provided, which defines the encoding when no explicit encoding is provided, to
avoid breaking all code using fmtId().
All users of fmtId()/fmtQualifiedId() are either converted to the explicit
version or a call to setFmtEncoding() has been added.
This commit does not yet utilize the now well-defined encoding, that will
happen in a subsequent commit.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 13
Security: CVE-2025-1094
Commit af35fe501 caused "pgbench -i" to emit a '\r' character
for each data row loaded (when stderr is a terminal).
That's effectively invisible on-screen, but it causes the
connected terminal program to consume a lot of cycles.
It's even worse if you're connected over ssh, as the data
then has to pass through the ssh tunnel.
Simplest fix is to move the added logic inside the if-tests
that check whether to print a progress line. We could do
it another way that avoids duplicating these few lines,
but on the whole this seems the most transparent way to
write it.
Like the previous commit, back-patch to all supported versions.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/4k4drkh7bcmdezq6zbkhp25mnrzpswqi2o75d5uv2eeg3aq6q7@b7kqdmzzwzgb
Backpatch-through: 13
Protect against malformed timestamps. Also protect against negative WalSegSz
as it triggers division by zero:
((0x100000000UL) / (WalSegSz)) can turn into zero in
XLogFileName(xlogfilename, ControlFile->checkPointCopy.ThisTimeLineID,
segno, WalSegSz);
because if WalSegSz is -1 then by arithmetic rules in C we get
0x100000000UL / 0xFFFFFFFFFFFFFFFFUL == 0.
Author: Ilyasov Ian <ianilyasov@outlook.com>
Author: Anton Voloshin <a.voloshin@postgrespro.ru>
Backpatch-through: 13
A few of the version checks in vacuum_one_database() do not call
PQfinish() before exiting. This precedent was unintentionally
established in commit 00d1e88d36, and while it's probably not too
problematic, it seems better to properly close the connection.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/Z6JAwqN1I8ljTuXp%40nathan
Backpatch-through: 13
When running on Windows, canonicalize_path() converts '\' to '/'
to prevent confusing the Windows command processor. It was
doing that in a non-encoding-aware fashion; but in SJIS there
are valid two-byte characters whose second byte matches '\'.
So encoding corruption ensues if such a character is used in
the path.
We can fairly easily fix this if we know which encoding is
in use, but a lot of our utilities don't have much of a clue
about that. After some discussion we decided we'd settle for
fixing this only in psql, and assuming that its value of
client_encoding matches what the user is typing.
It seems hopeless to get the server to deal with the problematic
characters in database path names, so we'll just declare that
case to be unsupported. That means nothing need be done in
the server, nor in utility programs whose only contact with
file path names is for database paths. But psql frequently
deals with client-side file paths, so it'd be good if it
didn't mess those up.
Bug: #18735
Reported-by: Koichi Suzuki <koichi.suzuki@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Koichi Suzuki <koichi.suzuki@enterprisedb.com>
Discussion: https://postgr.es/m/18735-4acdb3998bb9f2b1@postgresql.org
Backpatch-through: 13
These two platforms have a remarkably tight default limit on the
number of SysV semaphores in the system: SEMMNS is only 60
out-of-the-box. Unless manual action is taken to raise that,
we'll only be able to allocate 3 sets of 16 usable semaphores
each, leading to initdb setting max_connections to just 20.
That's problematic because the core regression tests expect
to be able to launch 20 concurrent sessions, leaving us with
no headroom. This seems to be the cause of intermittent
buildfarm failures on some machines.
While there's no getting around the fact that you'd better raise
SEMMNS for production use on these platforms, it does seem desirable
for "make check" to pass reliably without that. We can make that
happen, at least for awhile longer, with two small changes:
* Change sysv_sema.c's SEMAS_PER_SET to 19, so that we can eat up
all of the available semas not just most of them.
* Change initdb to make the smallest max_connections value it will
consider be 25 not 20.
This is a back-patch of recent HEAD commit 38da05346 into v17.
The motivation for doing this now is that an upcoming bug-fix
patch will give the new-in-17 slotsync worker process its own
reserved PGPROC and hence also semaphore. With that patch but
without this change, v17 would fail to start at all under the
default SEMMNS on these platforms.
Discussion: https://postgr.es/m/db2773a2-aca0-43d0-99c1-060efcd9954e@gmail.com
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
The test was creating both the dumps to compare from the same database
on the same node, so it would never detect any mismatches when comparing
the logical dumps of the two servers.
Fixing this issue has revealed that there is a difference in the dumps:
the tablespaces paths are different. This commit uses compare_text()
with a custom comparison function to erase the difference (slightly
tweaked to be able to work with WIN32 and non-WIN32 paths). This way,
the non-relevant parts of the tablespace path are ignored from the check
with the basic structure of the query string still compared.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87h67653ns.fsf@wibble.ilmari.org
Backpatch-through: 17
An \if command appearing within a false (not-to-be-executed) \if
branch was incorrectly treated the same as \elif. This could allow
statements within the inner \if to be executed when they should
not be. Also the missing inner \if stack entry would result in an
assertion failure (in assert-enabled builds) when the final \endif
is reached.
Report and patch by Michail Nikolaev. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/CANtu0oiA1ke=SP6tauhNqkUdv5QFsJtS1p=aOOf_iU+EhyKkjQ@mail.gmail.com
If an owned sequence is considered interesting, force its owning
table to be marked interesting too. This ensures, in particular,
that we'll fetch the owning table's column names so we have the
data needed for ALTER TABLE ... ADD GENERATED. Previously there were
edge cases where pg_dump could get SIGSEGV due to not having filled in
the column names. (The known case is where the owning table has been
made part of an extension while its identity sequence is not a member;
but there may be others.)
Also, if it's an identity sequence, force its dumped-components mask
to exactly match the owning table: dump definition only if we're
dumping the table's definition, dump data only if we're dumping the
table's data, etc. This generalizes the code introduced in commit
b965f2617 that set the sequence's dump mask to NONE if the owning
table's mask is NONE. That's insufficient to prevent failures,
because for example the table's mask might only request dumping ACLs,
which would lead us to still emit ALTER TABLE ADD GENERATED even
though we didn't create the table. It seems better to treat an
identity sequence as though it were an inseparable aspect of the
table, matching the treatment used in the backend's dependency logic.
Perhaps this policy needs additional refinement, but let's wait to
see some field use-cases before changing it further.
While here, add a comment in pg_dump.h warning against writing tests
like "if (dobj->dump == DUMP_COMPONENT_NONE)", which was a bug in this
case. There is one other example in getPublicationNamespaces, which
if it's not a bug is at least remarkably unclear and under-documented.
Changing that requires a separate discussion, however.
Per report from Artur Zakirov. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAKNkYnwXFBf136=u9UqUxFUVagevLQJ=zGd5BsLhCsatDvQsKQ@mail.gmail.com
On failure, the pg_upgrade log files are automatically appended to the
test log file, but the information reported was inconsistent.
A header, with the log file name, was reported with note(), while the
log contents and a footer used print(), making it harder to diagnose
failures when these are split into console output and test log file
because the pg_upgrade log file path in the header may not be included
in the test log file.
The output is now consolidated so as the header uses print() rather than
note(). An extra note() is added to inform that the contents of a
pg_upgrade log file are appended to the test log file.
The diffs from the regression test suite and dump files all use print()
to show their contents on failure.
Author: Joel Jacobson
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/49f7e64a-b9be-4a90-a9fe-210a7740405e@app.fastmail.com
Backpatch-through: 15
During pgbench's table initialization, progress updates could display
leftover characters from the previous message if the new message
was shorter. This commit resolves the issue by appending spaces to
the current message to fully overwrite any remaining characters from
the previous line.
Back-patch to all the supported versions.
Author: Yushi Ogiwara, Tatsuo Ishii, Fujii Masao
Reviewed-by: Tatsuo Ishii, Fujii Masao
Discussion: https://postgr.es/m/9a9b8b95b6a709877ae48ad5b0c59bb9@oss.nttdata.com
When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
Most came in during the 17 cycle, so backpatch there. Some
(particularly reorderbuffer.h) are very old, but backpatching doesn't
seem useful.
Like commits c9d297751959, c4f113e8fef9.
psql's --help was missed the description of the \pset variable
xheader_width, that should be listed when using \? or --help=commands,
and described for --help=variables.
Oversight in a45388d6e098.
Author: Pavel Luzanov
Discussion: https://postgr.es/m/1e3e06d6-0807-4e62-a9f6-c11481e6eb10@postgrespro.ru
Backpatch-through: 16
It failed to set the archive_command as it desired because of a syntax
problem. Oversight in commit 90bcc7c2db1d.
This bug doesn't cause the test to fail, because the test only checks
pg_rewind's output messages, not the actual outcome (and the outcome in
both cases is that the file is kept, not deleted). But in either case
the message about the file being kept is there, so it's hard to get
excited about doing much more.
Reported-by: Antonin Houska <ah@cybertec.at>
Author: Alexander Kukushkin <cyberdemn@gmail.com>
Discussion: https://postgr.es/m/7822.1732167825@antos
Previously, in unlucky cases, it was possible for pg_rewind to remove
certain WAL segments from the rewound demoted primary. In particular
this happens if those files have been marked for archival (i.e., their
.ready files were created) but not yet archived; the newly promoted node
no longer has such files because of them having been recycled, but they
are likely critical for recovery in the demoted node. If pg_rewind
removes them, recovery is not possible anymore.
Fix this by maintaining a hash table of files in this situation in the
scan that looks for a checkpoint, which the decide_file_actions phase
can consult so that it knows to preserve them.
Backpatch to 14. The problem also exists in 13, but that branch was not
blessed with commit eb00f1d4bf96, so this patch is difficult to apply
there. Users of older releases will just have to continue to be extra
careful when rewinding.
Co-authored-by: Полина Бунгина (Polina Bungina) <bungina@gmail.com>
Co-authored-by: Alexander Kukushkin <cyberdemn@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Discussion: https://postgr.es/m/CAAtGL4AhzmBRsEsaDdz7065T+k+BscNadfTqP1NcPmsqwA5HBw@mail.gmail.com
Sloppy refactoring in commit cca97ce6a caused these programs
to pass dbname = NULL to libpq if there was no "--dbname" switch
on the command line, where before "replication" would be passed.
This didn't break things completely, because the source server doesn't
care about the dbname specified for a physical replication connection.
However, it did cause libpq to fail to match a ~/.pgpass entry that
has "replication" in the dbname field. Restore the previous behavior
of passing "replication".
Also, closer inspection shows that if you do specify a dbname
in the connection string, that is what will be matched to ~/.pgpass,
not "replication". This was the pre-existing behavior so we should
not change it, but the SGML docs were pretty misleading about it.
Improve that.
Per bug #18685 from Toshi Harada. Back-patch to v17 where the
error crept in.
Discussion: https://postgr.es/m/18685-fee2dd142b9688f1@postgresql.org
Discussion: https://postgr.es/m/2702546.1730740456@sss.pgh.pa.us
Suppose that you run a command like "pg_combinebackup b1 b2 -o output",
but both b1 and b2 contain an INCREMENTAL.$something file in a directory
that is expected to contain relation files. This is an error, but the
previous code would not detect the problem and instead write a garbage
full file named $something to the output directory. This commit adds
code to detect the error and a test case to verify the behavior.
It's difficult to imagine that this will ever happen unless someone
is intentionally trying to break incremental backup, but per discussion,
let's consider that the lack of adequate sanity checking in this area is
a bug and back-patch to v17, where incremental backup was introduced.
Patch by me, reviewed by Bertrand Drouvot and Amul Sul.
Discussion: http://postgr.es/m/CA+TgmoaD7dBYPqe7kMtO0dyto7rd0rUh7joh=JPUSaFszKY6Pg@mail.gmail.com
This function is always called with a relative_path that ends in a
slash, so there's no need to insert a second one. So, don't. Instead,
add an assertion to verify that nothing gets broken in the future, and
adjust the comments.
While this is not a critical bug, the duplicate slash is visible in
error messages, which could create confusion, so back-patch to v17.
This is also better in that it keeps the code consistent across
branches.
Patch by me, reviewed by Bertrand Drouvot and Amul Sul.
Discussion: http://postgr.es/m/CA+TgmoaD7dBYPqe7kMtO0dyto7rd0rUh7joh=JPUSaFszKY6Pg@mail.gmail.com
Attempting to use an interval of time less than 1ms would cause \watch
to hang. This was confusing, so let's change the logic so as an
interval lower than 1ms behaves the same as 0.
Comments are added to mention that the internals of do_watch() had
better rely on "sleep_ms", the interval value in milliseconds. While on
it, this commit adds a test to check the behavior of interval values
less than 1ms.
\watch hanging for interval values less than 1ms existed before
6f9ee74d45aa, that has changed the code to support an interval value of
0.
Reported-by: Heikki Linnakangas
Author: Andrey M. Borodin, Michael Paquier
Discussion: https://postgr.es/m/88445e0e-3156-4b9d-afae-9a1a7b1631f6@iki.fi
Backpatch-through: 16
Commit 1ab67c9dfa, which modified this catalog query so that it
doesn't return temporary relations, forgot to schema-qualify the
operator. A comment earlier in the function implores us to fully
qualify everything in the query:
* Since we execute the constructed query with the default search_path
* (which could be unsafe), everything in this query MUST be fully
* qualified.
This commit fixes that. While at it, add a newline for consistency
with surrounding code.
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/ZwQJYcuPPUsF0reU%40nathan
Backpatch-through: 12
Several places treat MyStartTime as a "long", which is only 32 bits
wide on some platforms. In reality, MyStartTime is a pg_time_t,
i.e., a signed 64-bit integer. This will lead to interesting bugs
on the aforementioned systems in 2038 when signed 32-bit integers
are no longer sufficient to store Unix time (e.g., "pg_ctl start"
hanging). To fix, ensure that MyStartTime is handled as a 64-bit
value everywhere. (Of course, users will need to ensure that
time_t is 64 bits wide on their system, too.)
Co-authored-by: Max Johnson
Discussion: https://postgr.es/m/CO1PR07MB905262E8AC270FAAACED66008D682%40CO1PR07MB9052.namprd07.prod.outlook.com
Backpatch-through: 12
Commit bf03cfd1 started scanning all available BCP 47 locale names on
Windows. This caused an abort/crash in the Windows runtime library if
the default locale name contained non-ASCII characters, because of our
use of the setlocale() save/restore pattern with "char" strings. After
switching to another locale with a different encoding, the saved name
could no longer be understood, and setlocale() would abort.
"Turkish_Türkiye.1254" is the example from recent reports, but there are
other examples of countries and languages with non-ASCII characters in
their names, and they appear in Windows' (old style) locale names.
To defend against this:
1. In initdb, reject non-ASCII locale names given explicity on the
command line, or returned by the operating system environment with
setlocale(..., ""), or "canonicalized" by the operating system when we
set it.
2. In initdb only, perform the save-and-restore with Windows'
non-standard wchar_t variant of setlocale(), so that it is not subject
to round trip failures stemming from char string encoding confusion.
3. In the backend, we don't have to worry about the save-and-restore
problem because we have already vetted the defaults, so we just have to
make sure that CREATE DATABASE also rejects non-ASCII names in any new
databases. SET lc_XXX doesn't suffer from the problem, but the ban
applies to it too because it uses check_locale(). CREATE COLLATION
doesn't suffer from the problem either, but it doesn't use
check_locale() so it is not included in the new ban for now, to minimize
the change.
Anyone who encounters the new error message should either create a new
duplicated locale with an ASCII-only name using Windows Locale Builder,
or consider using BCP 47 names like "tr-TR". Users already couldn't
initialize a cluster with "Turkish_Türkiye.1254" on PostgreSQL 16+, but
the new failure mode is an error message that explains why, instead of a
crash.
Back-patch to 16, where bf03cfd1 landed. Older versions are affected
in theory too, but only 16 and later are causing crash reports.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net> (the idea, not the patch)
Reported-by: Haifang Wang (Centific Technologies Inc) <v-haiwang@microsoft.com>
Discussion: https://postgr.es/m/PH8PR21MB3902F334A3174C54058F792CE5182%40PH8PR21MB3902.namprd21.prod.outlook.com
For some reason this listed "-f" and "-w" as valid switches, though
the code doesn't implement any such thing nor do the docs mention
them. The effect of this was that if you tried to use one of these
switches, you'd get an unhelpful error message.
Yusuke Sugie
Discussion: https://postgr.es/m/68e72a2a70f4d84c1c7847b13bcdaef8@oss.nttdata.com
Reindexing temp tables or indexes of other sessions is not allowed.
However, reindexdb in parallel mode previously listed them as
the objects to process, leading to failures.
This commit ensures reindexdb in parallel mode skips temporary tables
and indexes by adding a condition based on the relpersistence column
in pg_class to the object listing queries, preventing these issues.
Note that this commit does not affect reindexdb when temporary tables
or indexes are explicitly specified using the -t or -j options;
reindexdb in that case still does not skip them and can cause an error.
Back-patch to v13 where parallel mode was introduced in reindexdb.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/5f37ee56-14fb-44fe-9150-9eb97e10538b@oss.nttdata.com
There's no need to add another level of indentation to this status
message. pg_log() will put it in the right place.
Oversight in commit 347758b120.
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/ZunW7XHLd2uTts4f%40nathan
Backpatch-through: 17
Running vacuumdb with a non-superuser while another user has created a
temporary table would lead to a mid-flight permission failure,
interrupting the operation. vacuum_rel() skips temporary relations of
other backends, and it makes no sense for vacuumdb to know about these
relations, so let's switch it to ignore temporary relations entirely.
Adding a qual in the query based on relpersistence simplifies the
generation of its WHERE clause in vacuum_one_database(), per se the
removal of "has_where".
Author: VaibhaveS, Michael Paquier
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAM_eQjwfAR=y3G1fGyS1U9FTmc+FyJm9amNfY2QCZBnDDbNPZg@mail.gmail.com
Backpatch-through: 12
Commit d1379ebf4 carelessly broke printACLColumn for pre-9.4 servers,
by using the cardinality() function which we introduced in 9.4.
We expect psql's describe-related commands to work back to 9.2, so
this is bad. Use the longstanding array_length() function instead.
Per report from Christoph Berg. Back-patch to v17.
Discussion: https://postgr.es/m/ZvLXYglRS6hMMhtr@msg.df7cb.de
Calling \bind repeatedly would cause the memory allocated for the list
of bind parameters to be leaked after each call, as the list is reset
when beginning a single call.
This issue is fixed by making the cleanup of the bind parameter list
more aggressive, refactoring it into a single routine called after
processing a query and before running an individual \bind.
HEAD required more surgery and has been fixed by 87eeadaea143. Issue
introduced by 5b66de3433e2.
Reported-by: Anthonin Bonnefoy
Discussion: https://postgr.es/m/2e5b89af-a351-ff0a-000c-037ac28314ab@gmail.com
Backpatch-through: 16
Since we introduced unlogged sequences in v15, identity sequences
have defaulted to having the same persistence as their owning table.
However, it is possible to change that with ALTER SEQUENCE, and
pg_dump tries to preserve the logged-ness of sequences when it doesn't
match (as indeed it wouldn't for an unlogged table from before v15).
The fly in the ointment is that ALTER SEQUENCE SET [UN]LOGGED fails
in binary-upgrade mode, because it needs to assign a new relfilenode
which we cannot permit in that mode. Thus, trying to pg_upgrade a
database containing a mismatching identity sequence failed.
To fix, add syntax to ADD/ALTER COLUMN GENERATED AS IDENTITY to allow
the sequence's persistence to be set correctly at creation, and use
that instead of ALTER SEQUENCE SET [UN]LOGGED in pg_dump. (I tried to
make SET [UN]LOGGED work without any pg_dump modifications, but that
seems too fragile to be a desirable answer. This way should be
markedly faster anyhow.)
In passing, document the previously-undocumented SEQUENCE NAME option
that pg_dump also relies on for identity sequences; I see no value
in trying to pretend it doesn't exist.
Per bug #18618 from Anthony Hsu.
Back-patch to v15 where we invented this stuff.
Discussion: https://postgr.es/m/18618-d4eb26d669ed110a@postgresql.org
/usr/bin/msgfmt: po/fr.po: warning: PO file header fuzzy
warning: older versions of msgfmt will give an error on this
Apparently, not all versions of msgfmt produce this. Quick fix for
now, more to be researched later.
This commit reverts 1adf16b8fb, 87c21bb941, and subsequent fixes and
improvements including df64c81ca9, c99ef1811a, 9dfcac8e15, 885742b9f8,
842c9b2705, fcf80c5d5f, 96c7381c4c, f4fc7cb54b, 60ae37a8bc, 259c96fa8f,
449cdcd486, 3ca43dbbb6, 2a679ae94e, 3a82c689fd, fbd4321fd5, d53a4286d7,
c086896625, 4e5d6c4091, 04158e7fa3.
The reason for reverting is security issues related to repeatable name lookups
(CVE-2014-0062). Even though 04158e7fa3 solved part of the problem, there
are still remaining issues, which aren't feasible to even carefully analyze
before the RC deadline.
Reported-by: Noah Misch, Robert Haas
Discussion: https://postgr.es/m/20240808171351.a9.nmisch%40google.com
Backpatch-through: 17
getTimelineHistory() is called twice, to read the source and the
target timeline history files. However, the loop to print the file
with the --debug option used the wrong variable when dealing with the
source. As a result, the source's history was always printed as empty.
Spotted while debugging bug #18575, but this does not fix that bug,
just the debugging output. Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/092dd515-b7b4-4fd0-8407-ceca2f02f6ec@iki.fi
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
