Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The bug fixed by 0874d4f3e183757ba15a4b3f3bf563e0393dd9c2
caused us to question and rework the handling of
subtransactions in 2PC during and at end of recovery.
Patch adds checks and tests to ensure no further bugs.
This effectively removes the temporary measure put in place
by 546c13e11b29a5408b9d6a6e3cca301380b47f7f.
Author: Simon Riggs
Reviewed-by: Tom Lane, Michael Paquier
Discussion: http://postgr.es/m/CANP8+j+vvXmruL_i2buvdhMeVv5TQu0Hm2+C5N+kdVwHJuor8w@mail.gmail.com
Seems to have been introduced in commit c219d9b0a. I think there indeed
was a "tupbasics.h" in some early drafts of that refactoring, but it
didn't survive into the committed version.
Amit Kapila
We'd already recognized that we can't pass function pointers across process
boundaries for functions in loadable modules, since a shared library could
get loaded at different addresses in different processes. But actually the
practice doesn't work for functions in the core backend either, if we're
using EXEC_BACKEND. This is the cause of recent failures on buildfarm
member culicidae. Switch to passing a string function name in all cases.
Something like this needs to be back-patched into 9.6, but let's see
if the buildfarm likes it first.
Petr Jelinek, with a bunch of basically-cosmetic adjustments by me
Discussion: https://postgr.es/m/548f9c1d-eafa-e3fa-9da8-f0cc2f654e60@2ndquadrant.com
Standardize on testing a hash index page's type by doing
(opaque->hasho_flag & LH_PAGE_TYPE) == LH_xxx_PAGE
Various places were taking shortcuts like
opaque->hasho_flag & LH_BUCKET_PAGE
which while not actually wrong, is still bad practice because
it encourages use of
opaque->hasho_flag & LH_UNUSED_PAGE
which *is* wrong (LH_UNUSED_PAGE == 0, so the above is constant false).
hash_xlog.c's hash_mask() contained such an incorrect test.
This also ensures that we mask out the additional flag bits that
hasho_flag has accreted since 9.6. pgstattuple's pgstat_hash_page(),
for one, was failing to do that and was thus actively broken.
Also fix assorted comments that hadn't been updated to reflect the
extended usage of hasho_flag, and fix some macros that were testing
just "(hasho_flag & bit)" to use the less dangerous, project-approved
form "((hasho_flag & bit) != 0)".
Coverity found the bug in hash_mask(); I noted the one in
pgstat_hash_page() through code reading.
Instead of allocating memory in brin_deform_tuple and brin_copy_tuple
over and over during a scan, allow reuse of previously allocated memory.
This is said to make for a measurable performance improvement.
Author: Jinyu Zhang, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/495deb78.4186.1500dacaa63.Coremail.beijing_pg@163.com
The WAL-writing piece was forgetting to set the pages-per-range value.
Also, fix the declared type of struct member heapBlk, which I mistakenly
set as OffsetNumber rather than BlockNumber.
Problem was introduced by commit c655899ba9ae (April 1st). Any system
that tries to replay the new WAL record written before this fix is
likely to die on replay and require pg_resetwal.
Reported by Tom Lane.
Discussion: https://postgr.es/m/20191.1491524824@sss.pgh.pa.us
The original code was overly optimistic about the cost of scanning a
BRIN index, leading to BRIN indexes being selected when they'd be a
worse choice than some other index. This complete rewrite should be
more accurate.
Author: David Rowley, based on an earlier patch by Emre Hasegeli
Reviewed-by: Emre Hasegeli
Discussion: https://postgr.es/m/CAKJS1f9n-Wapop5Xz1dtGdpdqmzeGqQK4sV2MK-zZugfC14Xtw@mail.gmail.com
Previously they were defined using multiples of XLogSegSize.
Remove GUC_UNIT_XSEGS. Introduce GUC_UNIT_MB
Extracted from patch series on XLogSegSize infrastructure.
Beena Emerson
2PC state info held in shmem at PREPARE, then cleaned at COMMIT PREPARED/ABORT PREPARED,
avoiding writing/fsyncing any state information to disk in the normal path, greatly enhancing replay speed.
Prepared transactions that live past one checkpoint redo horizon will be written to disk as now.
Similar conceptually to 978b2f65aa1262eb4ecbf8b3785cb1b9cf4db78e and building upon
the infrastructure created by that commit.
Authors, in equal measure: Stas Kelvich, Nikhil Sontakke and Michael Paquier
Discussion: https://postgr.es/m/CAMGcDxf8Bn9ZPBBJZba9wiyQq-Qk5uqq=VjoMnRnW5s+fKST3w@mail.gmail.com
Since hash indexes typically have very few overflow pages, adding a
new splitpoint essentially doubles the on-disk size of the index,
which can lead to large and abrupt increases in disk usage (and
perhaps long delays on occasion). To mitigate this problem to some
degree, divide larger splitpoints into four equal phases. This means
that, for example, instead of growing from 4GB to 8GB all at once, a
hash index will now grow from 4GB to 5GB to 6GB to 7GB to 8GB, which
is perhaps still not as smooth as we'd like but certainly an
improvement.
This changes the on-disk format of the metapage, so bump HASH_VERSION
from 2 to 3. This will force a REINDEX of all existing hash indexes,
but that's probably a good idea anyway. First, hash indexes from
pre-10 versions of PostgreSQL could easily be corrupted, and we don't
want to confuse corruption carried over from an older release with any
corruption caused despite the new write-ahead logging in v10. Second,
it will let us remove some backward-compatibility code added by commit
293e24e507838733aba4748b514536af2d39d7f2.
Mithun Cy, reviewed by Amit Kapila, Jesper Pedersen and me. Regression
test outputs updated by me.
Discussion: http://postgr.es/m/CAD__OuhG6F1gQLCgMQNnMNgoCvOLQZz9zKYJQNYvYmmJoM42gA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoYty0jCf-pa+m+vYUJ716+AxM7nv_syvyanyf5O-L_i2A@mail.gmail.com
When the BRIN summary tuple for a page range becomes too "wide" for the
values actually stored in the table (because the tuples that were
present originally are no longer present due to updates or deletes), it
can be useful to remove the outdated summary tuple, so that a future
summarization can install a tighter summary.
This commit introduces a SQL-callable interface to do so.
Author: Álvaro Herrera
Reviewed-by: Eiji Seki
Discussion: https://postgr.es/m/20170228045643.n2ri74ara4fhhfxf@alvherre.pgsql
Previously, only VACUUM would cause a page range to get initially
summarized by BRIN indexes, which for some use cases takes too much time
since the inserts occur. To avoid the delay, have brininsert request a
summarization run for the previous range as soon as the first tuple is
inserted into the first page of the next range. Autovacuum is in charge
of processing these requests, after doing all the regular vacuuming/
analyzing work on tables.
This doesn't impose any new tasks on autovacuum, because autovacuum was
already in charge of doing summarizations. The only actual effect is to
change the timing, i.e. that it occurs earlier. For this reason, we
don't go any great lengths to record these requests very robustly; if
they are lost because of a server crash or restart, they will happen at
a later time anyway.
Most of the new code here is in autovacuum, which can now be told about
"work items" to process. This can be used for other things such as GIN
pending list cleaning, perhaps visibility map bit setting, both of which
are currently invoked during vacuum, but do not really depend on vacuum
taking place.
The requests are at the page range level, a granularity for which we did
not have SQL-level access; we only had index-level summarization
requests via brin_summarize_new_values(). It seems reasonable to add
SQL-level access to range-level summarization too, so add a function
brin_summarize_range() to do that.
Authors: Álvaro Herrera, based on sketch from Simon Riggs.
Reviewed-by: Thomas Munro.
Discussion: https://postgr.es/m/20170301045823.vneqdqkmsd4as4ds@alvherre.pgsql
On EXEC_BACKEND builds, this can fail if ASLR is in use.
Backpatch to 9.5. On master, completely remove the bgw_main field
completely, since there is no situation in which it is safe for an
EXEC_BACKEND build. On 9.6 and 9.5, leave the field intact to avoid
breaking things for third-party code that doesn't care about working
under EXEC_BACKEND. Prior to 9.5, there are no in-core bgworker
entrypoints.
Petr Jelinek, reviewed by me.
Discussion: http://postgr.es/m/09d8ad33-4287-a09b-a77f-77f8761adb5e@2ndquadrant.com
Also, don't allow setting reloptions on them, since that would have no
effect given the lack of storage. The patch does this by introducing
a new reloption kind for which there are currently no reloptions -- we
might have some in the future -- so it adjusts parseRelOptions to
handle that case correctly.
Bumped catversion. System catalogs that contained reloptions for
partitioned tables are no longer valid; plus, there are now fewer
physical files on disk, which is not technically a catalog change but
still a good reason to re-initdb.
Amit Langote, reviewed by Maksim Milyutin and Kyotaro Horiguchi and
revised a bit by me.
Discussion: http://postgr.es/m/20170331.173326.212311140.horiguchi.kyotaro@lab.ntt.co.jp
There are no functional changes here; this simply encapsulates knowledge
of the ItemPointerData struct so that a future patch can change things
without more breakage.
All direct users of ip_blkid and ip_posid are changed to use existing
macros ItemPointerGetBlockNumber and ItemPointerGetOffsetNumber
respectively. For callers where that's inappropriate (because they
Assert that the itempointer is is valid-looking), add
ItemPointerGetBlockNumberNoCheck and ItemPointerGetOffsetNumberNoCheck,
which lack the assertion but are otherwise identical.
Author: Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdNnFon4cJiL=h1mZH3bgUeU+sWHuU4Yr8AB=j3A2p1GiA@mail.gmail.com
Most seriously, fix use of incorrect block ID, per a report from
Jeff Janes that it causes a crash and a diagnosis from Amit Kapila.
Improve consistency between the hash and btree versions of this
code by adding back a PANIC that btree has, and by registering
data in the xlog record in the same way, per complaints from
Jeff Janes and Amit Kapila.
Tidy up some minor cosmetic points, per complaints from Amit
Kapila.
Patch by Ashutosh Sharma, reviewed by Amit Kapila, and tested by
Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1w-9Qe=Ff1o6bSaXpNO9wqpo7_9GL8_CVhw4BoVVHasqg@mail.gmail.com
In commit b8d7f053c, we needed to fix ExecEvalWholeRowVar to not change
the state of the slot it's copying. The initial quick hack at that
required two rounds of tuple construction, which is not very nice.
To fix, add another primitive to tuptoaster.c that does precisely what
we need. (I initially tried to do this by refactoring one of the
existing functions into two pieces; but it looked like that might hurt
performance for the existing case, and the amount of code that could
be shared is not very large, so I gave up on that.)
Discussion: https://postgr.es/m/26088.1490315792@sss.pgh.pa.us
Assert-enabled build crashes but without asserts it works by wrong way:
it may not reset forcing full page write and preventing from starting
exclusive backup with the same name as cancelled.
Patch replaces pair of booleans
nonexclusive_backup_running/exclusive_backup_running to single enum to
correctly describe backup state.
Backpatch to 9.6 where bug was introduced
Reported-by: David Steele
Authors: Michael Paquier, David Steele
Reviewed-by: Anastasia Lubennikova
https://commitfest.postgresql.org/13/1068/
This provides infrastructure for looking up arbitrary, user-supplied
XIDs without a risk of scary-looking failures from within the clog
module. Normally, the oldest XID that can be safely looked up in CLOG
is the same as the oldest XID that can reused without causing
wraparound, and the latter is already tracked. However, while
truncation is in progress, the values are different, so we must
keep track of them separately.
Craig Ringer, reviewed by Simon Riggs and by me.
Discussion: http://postgr.es/m/CAMsr+YHQiWNEi0daCTboS40T+V5s_+dst3PYv_8v2wNVH+Xx4g@mail.gmail.com
GIN vacuum during cleaning posting tree can lock this whole tree for a long
time with by holding LockBufferForCleanup() on root. Patch changes it with
two ways: first, cleanup lock will be taken only if there is an empty page
(which should be deleted) and, second, it tries to lock only subtree, not the
whole posting tree.
Author: Andrey Borodin with minor editorization by me
Reviewed-by: Jeff Davis, me
https://commitfest.postgresql.org/13/896/
A hot standby replica keeps a list of Access Exclusive locks for a top
level transaction. These locks are released when the top level transaction
ends. Searching of this list is O(N^2), and each transaction had to pay the
price of searching this list for locks, even if it didn't take any AE
locks itself.
This patch optimizes this case by having the master server track which
transactions took AE locks, and passes that along to the standby server in
the commit/abort record. This allows the standby to only try to release
locks for transactions which actually took any, avoiding the majority of
the performance issue.
Refactor MyXactAccessedTempRel into MyXactFlags to allow minimal additional
cruft with this.
Analysis and initial patch by David Rowley
Author: David Rowley and Simon Riggs
Uses page-based mechanism to ensure we’re using the correct timeline.
Tests are included to exercise the functionality using a cold disk-level copy
of the master that's started up as a replica with slots intact, but the
intended use of the functionality is with later features.
Craig Ringer, reviewed by Simon Riggs and Andres Freund
Clear LH_PAGE_HAS_DEAD_TUPLES during replay, similar to what gets done
for btree. Update hashdesc.c for xl_hash_vacuum_one_page.
Oversights in commit 6977b8b7f4dfb40896ff5e2175cad7fdbda862eb spotted
by Amit Kapila. Patch by Ashutosh Sharma.
Bump WAL version. The original patch to make hash indexes write-ahead
logged probably should have done this, and the single page vacuuming
patch probably should have done it again, but better late than never.
Discussion: http://postgr.es/m/CAA4eK1Kd=mJ9xreovcsh0qMiAj-QqCphHVQ_Lfau1DR9oVjASQ@mail.gmail.com
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
The original messaging design, introduced in commit 068cfadf9, seems too
chatty now that some time has elapsed since the bug fix; most installations
will be in good shape and don't really need a reminder about this on every
postmaster start.
Hence, arrange to suppress the "wraparound protections are now enabled"
message during startup (specifically, during the TrimMultiXact() call).
The message will still appear if protection becomes effective at some
later point.
Discussion: https://postgr.es/m/17211.1489189214@sss.pgh.pa.us
This reverts commit ccce90b398673d55b0387b3de66639b1b30d451b. This
optimization is unsafe, at least, of rollbacks and rollbacks to
savepoints, but I'm concerned there may be other problematic cases as
well. Therefore, I've decided to revert this pending further
investigation.
Commit 0e141c0fbb211bdd23783afa731e3eef95c9ad7a introduced a mechanism
to reduce contention on ProcArrayLock by having a single process clear
XIDs in the procArray on behalf of multiple processes, reducing the
need to hand the lock around. Use a similar mechanism to reduce
contention on CLogControlLock. Testing shows that this very
significantly reduces the amount of time waiting for CLogControlLock
on high-concurrency pgbench tests run on a large multi-socket
machines; whether that translates into a TPS improvement depends on
how much of that contention is simply shifted to some other lock,
particularly WALWriteLock.
Amit Kapila, with some cosmetic changes by me. Extensively reviewed,
tested, and benchmarked over a period of about 15 months by Simon
Riggs, Robert Haas, Andres Freund, Jesper Pedersen, and especially by
Tomas Vondra and Dilip Kumar.
Discussion: http://postgr.es/m/CAA4eK1L_snxM_JcrzEstNq9P66++F4kKFce=1r5+D1vzPofdtg@mail.gmail.com
Discussion: http://postgr.es/m/CAA4eK1LyR2A+m=RBSZ6rcPEwJ=rVi1ADPSndXHZdjn56yqO6Vg@mail.gmail.com
Discussion: http://postgr.es/m/91d57161-d3ea-0cc2-6066-80713e4f90d7@2ndquadrant.com
The index is scanned by a single process, but then all cooperating
processes can iterate jointly over the resulting set of heap blocks.
In the future, we might also want to support using a parallel bitmap
index scan to set up for a parallel bitmap heap scan, but that's a
job for another day.
Dilip Kumar, with some corrections and cosmetic changes by me. The
larger patch set of which this is a part has been reviewed and tested
by (at least) Andres Freund, Amit Khandekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, Thomas Munro, and me.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
The primary goal here is to move all of the related page modifications
to a single section of code, in preparation for adding write-ahead
logging. In passing, rename _hash_metapinit to _hash_init, since it
initializes more than just the metapage.
Amit Kapila. The larger patch series of which this is a part has been
reviewed and tested by Álvaro Herrera, Ashutosh Sharma, Mark Kirkwood,
Jeff Janes, and Jesper Pedersen.
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
Previously, only IndexTuple format was supported for the output data of
an index-only scan. This is fine for btree, which is just returning a
verbatim index tuple anyway. It's not so fine for SP-GiST, which can
return reconstructed data that's much larger than a page.
To fix, extend the index AM API so that index-only scan data can be
returned in either HeapTuple or IndexTuple format. There's other ways
we could have done it, but this way avoids an API break for index AMs
that aren't concerned with the issue, and it costs little except a couple
more fields in IndexScanDescs.
I changed both GiST and SP-GiST to use the HeapTuple method. I'm not
very clear on whether GiST can reconstruct data that's too large for an
IndexTuple, but that seems possible, and it's not much of a code change to
fix.
Per a complaint from Vik Fearing. Reviewed by Jason Li.
Discussion: https://postgr.es/m/49527f79-530d-0bfe-3dad-d183596afa92@2ndquadrant.fr
As with commit b0f18cb77f50a54e997d857d592f6a511617f52c, the goal
here is to move all of the related page modifications to a single
section of code, in preparation for adding write-ahead logging.
Amit Kapila, with slight changes by me. The larger patch series
of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen, all of whom should also have been credited in the
previous commit message.
In preparation for adding write-ahead logging to hash indexes,
refactor _hash_freeovflpage and _hash_squeezebucket so that all
related page modifications happen in a single section of code. The
previous coding assumed that it would be fine to move tuples one at a
time, and also that the various operations involved in freeing an
overflow page didn't necessarily all need to be done together, all
of which is true if you don't care about write-ahead logging.
Amit Kapila, with slight changes by me.
In combination with 569174f1be92be93f5366212cc46960d28a5c5cd, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
This isn't exposed to the optimizer or the executor yet; we'll add
support for those things in a separate patch. But this puts the
basic mechanism in place: several processes can attach to a parallel
btree index scan, and each one will get a subset of the tuples that
would have been produced by a non-parallel scan. Each index page
becomes the responsibility of a single worker, which then returns
all of the TIDs on that page.
Rahila Syed, Amit Kapila, Robert Haas, reviewed and tested by
Anastasia Lubennikova, Tushar Ahuja, and Haribabu Kommi.
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
