Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Commit 59702716 added transition table support to PL/pgsql so that
SQL queries in trigger functions could access those transient
tables. In order to provide the same level of support for PL/perl,
PL/python and PL/tcl, refactor the relevant code into a new
function SPI_register_trigger_data. Call the new function in the
trigger handler of all four PLs, and document it as a public SPI
function so that authors of out-of-tree PLs can do the same.
Also get rid of a second QueryEnvironment object that was
maintained by PL/pgsql. That was previously used to deal with
cursors, but the same approach wasn't appropriate for PLs that are
less tangled up with core code. Instead, have SPI_cursor_open
install the connection's current QueryEnvironment, as already
happens for SPI_execute_plan.
While in the docs, remove the note that transition tables were only
supported in C and PL/pgSQL triggers, and correct some ommissions.
Thomas Munro with some work by Kevin Grittner (mostly docs)
Instead of
plan = plpy.prepare(...)
res = plpy.execute(plan, ...)
you can now write
plan = plpy.prepare(...)
res = plan.execute(...)
or even
res = plpy.prepare(...).execute(...)
and similarly for the cursor() method.
This is more in object oriented style, and makes the hybrid nature of
the existing execute() function less confusing.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Fix all perlcritic warnings of severity level 5, except in
src/backend/utils/Gen_dummy_probes.pl, which is automatically generated.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
There is no specific reason for this right now, but keeping support for
old Python versions around indefinitely increases the maintenance
burden. The oldest supported Python version is now Python 2.4, which is
still shipped in RHEL/CentOS 5 by default.
In configure, add a check for the required Python version and give a
friendly error message for an old version, instead of relying on an
obscure build error later on.
PLy_generate_spi_exceptions neglected to do Py_INCREF on the new exception
objects, evidently supposing that PyModule_AddObject would do that --- but
it doesn't. This left us in a situation where a Python garbage collection
cycle could result in deletion of exception object(s), causing server
crashes or wrong answers if the exception objects are used later in the
session.
In addition, PLy_generate_spi_exceptions didn't bother to test for
a null result from PyErr_NewException, which at best is inconsistent
with the code in PLy_add_exceptions. And PLy_add_exceptions, while it
did do Py_INCREF on the exceptions it makes, waited to do that till
after some PyModule_AddObject calls, creating a similar risk for
failure if garbage collection happened within those calls.
To fix, refactor to have just one piece of code that creates an
exception object and adds it to the spiexceptions module, bumping the
refcount first.
Also, let's add an additional refcount to represent the pointer we're
going to store in a C global variable or hash table. This should only
matter if the user does something weird like delete the spiexceptions
Python module, but lack of paranoia has caused us enough problems in
PL/Python already.
The fact that PyModule_AddObject doesn't do a Py_INCREF of its own
explains the need for the Py_INCREF added in commit 4c966d920, so we
can improve the comment about that; also, this means we really want
to do that before not after the PyModule_AddObject call.
The missing Py_INCREF in PLy_generate_spi_exceptions was reported and
diagnosed by Rafa de la Torre; the other fixes by me. Back-patch
to all supported branches.
Discussion: https://postgr.es/m/CA+Fz15kR1OXZv43mDrJb3XY+1MuQYWhx5kx3ea6BRKQp6ezGkg@mail.gmail.com
The idea behind SPI_push was to allow transitioning back into an
"unconnected" state when a SPI-using procedure calls unrelated code that
might or might not invoke SPI. That sounds good, but in practice the only
thing it does for us is to catch cases where a called SPI-using function
forgets to call SPI_connect --- which is a highly improbable failure mode,
since it would be exposed immediately by direct testing of said function.
As against that, we've had multiple bugs induced by forgetting to call
SPI_push/SPI_pop around code that might invoke SPI-using functions; these
are much harder to catch and indeed have gone undetected for years in some
cases. And we've had to band-aid around some problems of this ilk by
introducing conditional push/pop pairs in some places, which really kind
of defeats the purpose altogether; if we can't draw bright lines between
connected and unconnected code, what's the point?
Hence, get rid of SPI_push[_conditional], SPI_pop[_conditional], and the
underlying state variable _SPI_curid. It turns out SPI_restore_connection
can go away too, which is a nice side benefit since it was never more than
a kluge. Provide no-op macros for the deleted functions so as to avoid an
API break for external modules.
A side effect of this removal is that SPI_palloc and allied functions no
longer permit being called when unconnected; they'll throw an error
instead. The apparent usefulness of the previous behavior was a mirage
as well, because it was depended on by only a few places (which I fixed in
preceding commits), and it posed a risk of allocations being unexpectedly
long-lived if someone forgot a SPI_push call.
Discussion: <20808.1478481403@sss.pgh.pa.us>
The code here would need some change anyway given planned change in
SPI_modifytuple semantics, since this executes after we've exited the
SPI environment. But really it's better to just use heap_modify_tuple.
While at it, normalize use of SPI_fnumber: make error messages distinguish
no-such-column from can't-set-system-column, and remove test for deleted
column which is going to migrate into SPI_fnumber. The lack of a check
for system column names is actually a pre-existing bug here, and might
even qualify as a security bug except that we don't have any trusted
version of plpython.
This causes the supplied function name to appear in any error message,
making the error message friendlier and relieving us from having to
provide our own in some cases.
Turns out that the output format of Python Decimal isn't totally platform-
independent either. There are other tests for multi-dimensional arrays,
so rather than try to fix this test case, just remove it.
Per buildfarm member prairiedog.
Instead of treating all python sequence types as array dimensions, except
for tuples and various kinds of strings, only treat Python lists as
dimensions. The PyBytes_Check() function used previously is only available
on Python 2.6 and newer, and it was a bit fiddly anyway. The list of
exceptions would require adjustment if Python got a new kind of a sequence
similar to bytes/unicodes/strings, so only checking for Lists seems more
future-proof. The documentation only mentioned using Lists, so this is
closer to what was documented, anyway.
This should fix the buildfarm failures on systems building with Python 2.5,
although I don't have Python 2.5 installed myself to test with.
The number of decimals printed for floats varied in this test case, as
noted by several buildfarm members. There's nothing special about floats
and arrays in the code being tested, so replace the floats with numerics to
make the output platform-independent.
Multi-dimensional arrays can now be used as arguments to a PL/python function
(used to throw an error), and they can be returned as nested Python lists.
This makes a backwards-incompatible change to the handling of composite
types in arrays. Previously, you could return an array of composite types
as "[[col1, col2], [col1, col2]]", but now that is interpreted as a two-
dimensional array. Composite types in arrays must now be returned as
Python tuples, not lists, to resolve the ambiguity. I.e. "[(col1, col2),
(col1, col2)]".
To avoid breaking backwards-compatibility, when not necessary, () is still
accepted for arrays at the top-level, but it is always treated as a
single-dimensional array. Likewise, [] is still accepted for composite types,
when they are not in an array. Update the documentation to recommend using []
for arrays, and () for composite types, with a mention that those other things
are also accepted in some contexts.
This needs to be mentioned in the release notes.
Alexey Grishchenko, Dave Cramer and me. Reviewed by Pavel Stehule.
Discussion: <CAH38_tmbqwaUyKs9yagyRra=SMaT45FPBxk1pmTYcM0TyXGG7Q@mail.gmail.com>
Similar to 0137caf273, this makes contrib and pl tests less dependant on
hash-table order. After this commit, at least some order affecting
changes to execGrouping.c don't result in regression test changes
anymore.
The sequence "configure; cd src/pl/plpython; make -j" failed due to
trying to compile plpython's .o files before the generated headers
finished building. (This is an important real-world case, since it's
the typical second step when building both plpython2 and plpython3.)
This happens because the submake-generated-headers target is not
placed in a way to make it a prerequisite to compiling the .o files.
Fix that.
Checking other uses of submake-generated-headers, I noted that the one
attached to pg_regress was similarly misplaced; but it's actually not
needed at all for pg_regress.o, rather regress.o, so move it to be a
prerequisite of that.
Back-patch to 9.6 where submake-generated-headers was introduced
(by commit 548af97fc). It's not immediately clear to me why the
previous coding didn't have the same issue; but since we've not
had field reports of plpython make failing, leave it alone in the
older branches.
Pavel Raiskup and Tom Lane
Discussion: <1925924.izSMJEZO3x@unused-4-107.brq.redhat.com>
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
Instead of calling PLy_elog() for reporting Python argument parsing
errors, generate appropriate exceptions. This matches the existing plpy
functions and is more consistent with the behavior of the Python
argument parsing routines.
As of 9.6, pg_regress doesn't build unless storage/lwlocknames.h has been
created; but there was nothing forcing that to happen if you just went into
src/test/regress/ and built there. We previously had a similar complaint
about plpython.
To fix in a way that won't break next time we invent a generated header,
make src/backend/Makefile expose a phony target for updating all the
include files it builds, and invoke that before building pg_regress or
plpython. In principle, maybe we ought to invoke that everywhere; but
it would add a lot of usually-useless make cycles, so let's just do it
in the places where people have complained.
I made a couple of cosmetic adjustments in src/backend/Makefile as well,
to deal with the generated headers in consistent orders.
Michael Paquier and Tom Lane
Report: <31398.1467036827@sss.pgh.pa.us>
Report: <20150916200959.GB32090@msg.df7cb.de>
In commit 5c3c3cd0a3046339597a03bc708cb5530dc07059, the new tests were
apparently just dumped into the first convenient file. Move them to a
separate file dedicated to testing that functionality and leave the
plpython_test test to test basic functionality, as it did before.
It turns out that those PyErr_Clear() calls I removed from plpy_elog.c
in 7e3bb080387f4143 et al were not quite as random as they appeared: they
mask a Python 2.3.x bug. (Specifically, it turns out that PyType_Ready()
can fail if the error indicator is set on entry, and PLy_traceback's fetch
of frame.f_code may be the first operation in a session that requires the
"frame" type to be readied. Ick.) Put back the clear call, but in a more
centralized place closer to what it's protecting, and this time with a
comment warning what it's really for.
Per buildfarm member prairiedog. Although prairiedog was only failing
on HEAD, it seems clearly possible for this to occur in older branches
as well, so back-patch to 9.2 the same as the previous patch.
Commit 5c3c3cd0a3046339 plastered "volatile" on a bunch of variables
in PLy_output(), but removed the one that actually mattered, ie the
one on "oldcontext". This allows some versions of clang to generate
code in which "oldcontext" has been trashed when control reaches the
PG_CATCH block. Per buildfarm member tick.
It's not entirely clear to me whether PyString_AsString can return
null (looks like the answer might vary between Python 2 and 3).
But in any case, this code's attempt to cope with the possibility
was quite broken, because pstrdup() neither allows a null argument
nor ever returns a null.
Moreover, the code below this point assumes that "message" is a
palloc'd string, which would not be the case for a dgettext result.
Fix both problems by doing the pstrdup step separately.
PLy_elog() could attempt to access strings that Python had already freed,
because the strings that PLy_get_spi_error_data() returns are simply
pointers into storage associated with the error "val" PyObject. That's
fine at the instant PLy_get_spi_error_data() returns them, but just after
that PLy_traceback() intentionally releases the only refcount on that
object, allowing it to be freed --- so that the strings we pass to
ereport() are dangling pointers.
In principle this could result in garbage output or a coredump. In
practice, I think the risk is pretty low, because there are no Python
operations between where we decrement that refcount and where we use the
strings (and copy them into PG storage), and thus no reason for Python
to recycle the storage. Still, it's clearly hazardous, and it leads to
Valgrind complaints when running under a Valgrind that hasn't been
lobotomized to ignore Python memory allocations.
The code was a mess anyway: we fetched the error data out of Python
(clearing Python's error indicator) with PyErr_Fetch, examined it, pushed
it back into Python with PyErr_Restore (re-setting the error indicator),
then immediately pulled it back out with another PyErr_Fetch. Just to
confuse matters even more, there were some gratuitous-and-yet-hazardous
PyErr_Clear calls in the "examine" step, and we didn't get around to doing
PyErr_NormalizeException until after the second PyErr_Fetch, making it even
less clear which object was being manipulated where and whether we still
had a refcount on it. (If PyErr_NormalizeException did substitute a
different "val" object, it's possible that the problem could manifest for
real, because then we'd be doing assorted Python stuff with no refcount
on the object we have string pointers into.)
So, rearrange all that into some semblance of sanity, and don't decrement
the refcount on the Python error objects until the end of PLy_elog().
In HEAD, I failed to resist the temptation to reformat some messy bits
from 5c3c3cd0a3046339 along the way.
Back-patch as far as 9.2, because the code is substantially the same
that far back. I believe that 9.1 has the bug as well; but the code
around it is rather different and I don't want to take a chance on
breaking something for what seems a low-probability problem.
Patch adds a new, more rich, way to emit error message or exception from
PL/Pythonu code.
Author: Pavel Stehule
Reviewers: Catalin Iacob, Peter Eisentraut, Jim Nasby
PL/Python failed if a PL/Python function was invoked recursively via SPI,
since arguments are passed to the function in its global dictionary
(a horrible decision that's far too ancient to undo) and it would delete
those dictionary entries on function exit, leaving the outer recursion
level(s) without any arguments. Not deleting them would be little better,
since the outer levels would then see the innermost level's arguments.
Since PL/Python uses ValuePerCall mode for evaluating set-returning
functions, it's possible for multiple executions of the same SRF to be
interleaved within a query. PL/Python failed in such a case, because
it stored only one iterator per function, directly in the function's
PLyProcedure struct. Moreover, one interleaved instance of the SRF
would see argument values that should belong to another.
Hence, invent code for saving and restoring the argument entries. To fix
the recursion case, we only need to save at recursive entry and restore
at recursive exit, so the overhead in non-recursive cases is negligible.
To fix the SRF case, we have to save when suspending a SRF and restore
when resuming it, which is potentially not negligible; but fortunately
this is mostly a matter of manipulating Python object refcounts and
should not involve much physical data copying.
Also, store the Python iterator and saved argument values in a structure
associated with the SRF call site rather than the function itself. This
requires adding a memory context deletion callback to ensure that the SRF
state is cleaned up if the calling query exits before running the SRF to
completion. Without that we'd leak a refcount to the iterator object in
such a case, resulting in session-lifespan memory leakage. (In the
pre-existing code, there was no memory leak because there was only one
iterator pointer, but what would happen is that the previous iterator
would be resumed by the next query attempting to use the SRF. Hardly the
semantics we want.)
We can buy back some of whatever overhead we've added by getting rid of
PLy_function_delete_args(), which seems a useless activity: there is no
need to delete argument entries from the global dictionary on exit,
since the next time anyone would see the global dict is on the next
fresh call of the PL/Python function, at which time we'd overwrite those
entries with new arg values anyway.
Also clean up some really ugly coding in the SRF implementation, including
such gems as returning directly out of a PG_TRY block. (The only reason
that failed to crash hard was that all existing call sites immediately
exited their own PG_TRY blocks, popping the dangling longjmp pointer before
there was any chance of it being used.)
In principle this is a bug fix; but it seems a bit too invasive relative to
its value for a back-patch, and besides the fix depends on memory context
callbacks so it could not go back further than 9.5 anyway.
Alexey Grishchenko and Tom Lane
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
