Some of <-> operators between geometric types have their commutators missed.
This commit adds them. The motivation is upcoming kNN support for some of those
operators.
Discussion: https://postgr.es/m/f71ba19d-d989-63b6-f04a-abf02ad9345d%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Tom Lane, Alexander Korotkov
Most block-based table AMs will need the exact same implementation of
the relation_size callback as the heap, and if they use a standard
page layout, they will likely need an implementation of the
relation_estimate_size callback that is very similar to that of the
heap. Rearrange to facilitate code reuse.
Patch by me, reviewed by Michael Paquier, Daniel Gustafsson, and
Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZ6DBPnP1E-vRpQZUJQijJFD54F+SR_pxGiAAS-MyrigA@mail.gmail.com
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
The code for conversions SQL_ASCII <-> MULE_INTERNAL and
SQL_ASCII <-> UTF8 was unreachable, because we long ago changed
the wrapper functions pg_do_encoding_conversion() et al so that
they have hard-wired behaviors for conversions involving SQL_ASCII.
(At least some of those fast paths date back to 2002, though it
looks like we may not have been totally consistent about this until
later.) Given the lack of complaints, nobody is dissatisfied with
this state of affairs. Hence, let's just remove the unreachable code.
Also, change CREATE CONVERSION so that it rejects attempts to
define such conversions. Since we consider that SQL_ASCII represents
lack of knowledge about the encoding in use, such a conversion would
be semantically dubious even if it were reachable.
Adjust a couple of regression test cases that had randomly decided
to rely on these conversion functions rather than any other ones.
Discussion: https://postgr.es/m/41163.1559156593@sss.pgh.pa.us
The source defining the current fallback and hardcoded DH parameters
has disappeared from the web a long time ago, and RFC 3526 defines the
most current Diffie-Hellman MODP groups, so update to those new values.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/5E60AC9A-CB10-4851-9EF2-7209490A164C@yesql.se
The serialization format of multivariate MCV lists included alignment in
order to allow direct access to part of the serialized data, but despite
multiple fixes (see for example commits d85e0f366a and ea4e1c0e8f) this
proved to be problematic.
This commit abandons alignment in the serialized format, and just copies
everything during deserialization. We now also track amount of memory
needed after deserialization (including alignment), which allows us to
deserialize the MCV list in a single pass.
Bump catversion, as this affects contents of pg_statistic_ext_data.
Backpatch to 12, where multi-column MCV lists were introduced.
Author: Tomas Vondra
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/2201.1561521148@sss.pgh.pa.us
The function pg_mcv_list_items() returns values stored in MCV items. The
items may contain columns with different data types, so the function was
generating text array-like representation, but in an ad-hoc way without
properly escaping various characters etc.
Fixed by simply building a text[] array, which also makes it easier to
use from queries etc.
Requires changes to pg_proc entry, so bump catversion.
Backpatch to 12, where multi-column MCV lists were introduced.
Author: Tomas Vondra
Reviewed-by: Dean Rasheed
Discussion: https://postgr.es/m/20190618205920.qtlzcu73whfpfqne@development
The main change is a new stemmer for Greek. There are minor changes
in the Danish and French stemmers.
Author: Panagiotis Mavrogiorgos <pmav99@gmail.com>
This is a follow-up refactoring after 09ec55b and b674211, which has
proved that the encoding and decoding routines used by SCRAM have a
poor interface when it comes to check after buffer overflows. This adds
an extra argument in the shape of the length of the result buffer for
each routine, which is used for overflow checks when encoding or
decoding an input string. The original idea comes from Tom Lane.
As a result of that, the encoding routine can now fail, so all its
callers are adjusted to generate proper error messages in case of
problems.
On failure, the result buffer gets zeroed.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20190623132535.GB1628@paquier.xyz
UBSan complains about this. Instead, cast to a suitable type requiring
only 4-byte alignment. DatumGetAnyArrayP() already assumes one can cast
between AnyArrayType and ArrayType, so this doesn't introduce a new
assumption. Back-patch to 9.5, where AnyArrayType was introduced.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20190629210334.GA1244217@rfd.leadboat.com
Instead of calling pg_lsn_in() in check_recovery_target_lsn and
timestamptz_in() in check_recovery_target_time, reorganize the
respective code so that we don't raise any errors in the check hooks.
The previous code tried to use PG_TRY/PG_CATCH to handle errors in a
way that is not safe, so now the code contains no ereport() calls and
can operate safely within the GUC error handling system.
Moreover, since the interpretation of the recovery_target_time string
may depend on the time zone, we cannot do the final processing of that
string until all the GUC processing is done. Instead,
check_recovery_target_time() now does some parsing for syntax
checking, but the actual conversion to a timestamptz value is done
later in the recovery code that uses it.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190611061115.njjwkagvxp4qujhp%40alap3.anarazel.de
The date/time values 'current', 'invalid', and 'undefined' were
removed a long time ago, but the code still contains explicit error
handling for the transition. To simplify the code and avoid having to
handle these values everywhere, just remove the recognition of these
tokens altogether now.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
fe0a0b5 has removed the last use of this routine from pgcrypto, leading
to a useless symbol definition and an extra configure check.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/20190626142544.GN1714@paquier.xyz
Original MIPS-I processors didn't have the LL/SC instructions (nor any
other userland synchronization primitive). If the build toolchain
targets that ISA variant by default, as an astonishingly large fraction
of MIPS platforms still do, the assembler won't take LL/SC without
coercion in the form of a ".set mips2" instruction. But we issued that
unconditionally, making it an ISA downgrade for chips later than MIPS2.
That breaks things for the latest MIPS r6 ISA, which encodes these
instructions differently. Adjust the code so we don't change ISA level
if it's >= 2.
Note that this patch doesn't change what happens on an actual MIPS-I
processor: either the kernel will emulate these instructions
transparently, or you'll get a SIGILL failure. That tradeoff seemed
fine in 2002 when this code was added (cf 3cbe6b247), and it's even
more so today when MIPS-I is basically extinct. But let's add a
comment about that.
YunQiang Su (with cosmetic adjustments by me). Back-patch to all
supported branches.
Discussion: https://postgr.es/m/15844-8f62fe7e163939b3@postgresql.org
We don't need to restrict column privileges on pg_statistic_ext;
all of that data is OK to read publicly. What we *do* need to do,
which was overlooked by 6cbfb784c, is revoke public read access on
pg_statistic_ext_data; otherwise we still have the same security
hole we started with.
Catversion bump to ensure that installations calling themselves
beta2 will have this fix.
Diagnosis/correction by Dean Rasheed and Tomas Vondra, but I'm
going to go ahead and push this fix ASAP so we get more buildfarm
cycles on it.
Discussion: https://postgr.es/m/8833.1560647898@sss.pgh.pa.us
Regular per-column statistics are stored in pg_statistics catalog, which
is however rather difficult to read, so we also have pg_stats view with
a human-reablable version of the data.
For extended statistic the catalog was fairly easy to read, so we did
not have such human-readable view so far. Commit 9b6babfa2d however did
split the catalog into two, which makes querying harder. Furthermore,
we want to show the multi-column MCV list in a way similar to per-column
stats (and not as a bytea value).
This commit introduces pg_stats_ext view, joining the two catalogs and
massaging the data to produce human-readable output similar to pg_stats.
It also considers RLS and access privileges - the data is shown only when
the user has access to all columns the extended statistic is defined on.
Bumped CATVERSION due to adding new system view.
Author: Dean Rasheed, with improvements by me
Reviewed-by: Dean Rasheed, John Naylor
Discussion: https://postgr.es/m/CAEZATCUhT9rt7Ui%3DVdx4N%3D%3DVV5XOK5dsXfnGgVOz_JhAicB%3DZA%40mail.gmail.com
Since extended statistic got introduced in PostgreSQL 10, there was a
single catalog pg_statistic_ext storing both the definitions and built
statistic. That's however problematic when a user is supposed to have
access only to the definitions, but not to user data.
Consider for example pg_dump on a database with RLS enabled - if the
pg_statistic_ext catalog respects RLS (which it should, if it contains
user data), pg_dump would not see any records and the result would not
define any extended statistics. That would be a surprising behavior.
Until now this was not a pressing issue, because the existing types of
extended statistic (functional dependencies and ndistinct coefficients)
do not include any user data directly. This changed with introduction
of MCV lists, which do include most common combinations of values.
The easiest way to fix this is to split the pg_statistic_ext catalog
into two - one for definitions, one for the built statistic values.
The new catalog is called pg_statistic_ext_data, and we're maintaining
a 1:1 relationship with the old catalog - either there are matching
records in both catalogs, or neither of them.
Bumped CATVERSION due to changing system catalog definitions.
Author: Dean Rasheed, with improvements by me
Reviewed-by: Dean Rasheed, John Naylor
Discussion: https://postgr.es/m/CAEZATCUhT9rt7Ui%3DVdx4N%3D%3DVV5XOK5dsXfnGgVOz_JhAicB%3DZA%40mail.gmail.com
In order to separate OpenSSL's SHA symbols, this header has been using
USE_SSL, which is equivalent to USE_OPENSSL. There is now only one SSL
implementation included in the tree, so this works fine, but when
adding a new SSL implementation this would run into failures.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/0DF29010-CE26-4F51-85A6-9C8ABF5536F9@yesql.se
One would have needed out-of-tree code to observe the defects. Remove
unreferenced fields instead of completing their support functions.
Since in-tree code can't reach _readIntoClause(), no catversion bump.
This makes the header more consistent with the surroundings, with
declarations associated to a given file grouped together.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/20190608012439.GB7228@paquier.xyz
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
The file has been introduced in src/backend/libpq/ as of b0b39f72, but
all backend-side headers of libpq are located in src/include/libpq/.
Note that the identification path on top of the file referred to
src/include/libpq/ from the start.
Author: Michael Paquier
Reviewed-by: Stephen Frost
Discussion: https://postgr.es/m/20190607043415.GE1736@paquier.xyz
We used the same slot to store a tuple from the index, and to store a
tuple from the table. That's not OK. It worked with the heap, because
heapam_getnextslot() stores a HeapTuple to the slot, and doesn't care how
large the tts_values/nulls arrays are. But when I played with a toy table
AM implementation that used a virtual tuple, it caused memory overruns.
In the passing, tidy up comments on the ioss_PscanLen fields.
The defined callback definitions have been using references to heap for
a couple of variables and comments. This makes the whole interface more
consistent by using "table" which is more generic.
A variable storing index information was misspelled as well.
Author: Michael Paquier
Discussion: https://postgr.es/m/20190601190946.GB1905@paquier.xyz
Interestingly only C++ compilers have, so far, complained about this
odd forward declaration. This originated when IndexBuildCallback was
defined in another file, but now is completely unnecessary (but was
wrong before too, cpluspluscheck just wouldn't have noticed).
Reported-By: Tom Lane
Discussion: https://postgr.es/m/53941.1559239260@sss.pgh.pa.us
Some of the wrapper functions didn't match the callback names. Many of
them due to staying "consistent" with historic naming of the wrapped
functionality. We decided that for most cases it's more important to
be for tableam to be consistent going forward, than with the past.
The one exception is beginscan/endscan/... because it'd have looked
odd to have systable_beginscan/endscan/... with a different naming
scheme, and changing the systable_* APIs would have caused way too
much churn (including breaking a lot of external users).
Author: Ashwin Agrawal, with some small additions by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CALfoeiugyrXZfX7n0ORCa4L-m834dzmaE8eFdbNR6PMpetU4Ww@mail.gmail.com
