In logical replication mode, a WalSender is supposed to be able
to execute any regular SQL command, as well as the special
replication commands. Poor design of the replication-command
parser caused it to fail in various cases, notably:
* semicolons embedded in a command, or multiple SQL commands
sent in a single message;
* dollar-quoted literals containing odd numbers of single
or double quote marks;
* commands starting with a comment.
The basic problem here is that we're trying to run repl_scanner.l
across the entire input string even when it's not a replication
command. Since repl_scanner.l does not understand all of the
token types known to the core lexer, this is doomed to have
failure modes.
We certainly don't want to make repl_scanner.l as big as scan.l,
so instead rejigger stuff so that we only lex the first token of
a non-replication command. That will usually look like an IDENT
to repl_scanner.l, though a comment would end up getting reported
as a '-' or '/' single-character token. If the token is a replication
command keyword, we push it back and proceed normally with repl_gram.y
parsing. Otherwise, we can drop out of exec_replication_command()
without examining the rest of the string.
(It's still theoretically possible for repl_scanner.l to fail on
the first token; but that could only happen if it's an unterminated
single- or double-quoted string, in which case you'd have gotten
largely the same error from the core lexer too.)
In this way, repl_gram.y isn't involved at all in handling general
SQL commands, so we can get rid of the SQLCmd node type. (In
the back branches, we can't remove it because renumbering enum
NodeTag would be an ABI break; so just leave it sit there unused.)
I failed to resist the temptation to clean up some other sloppy
coding in repl_scanner.l while at it. The only externally-visible
behavior change from that is it now accepts \r and \f as whitespace,
same as the core lexer.
Per bug #17379 from Greg Rychlewski. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17379-6a5c6cfb3f1f5e77@postgresql.org
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153367cdab278738ee4aebbfd158e0546 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4bf9f5f65529dfa4c8282abb734dd454.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b0dadd1068a03938e4b8ff562587ccc) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
pg_basebackup now has a --target=TARGET[:DETAIL] option. If specfied,
it is sent to the server as the value of the TARGET option to the
BASE_BACKUP command. If DETAIL is included, it is sent as the value of
the new TARGET_DETAIL option to the BASE_BACKUP command. If the
target is anything other than 'client', pg_basebackup assumes that it
will now be the server's job to write the backup in a location somehow
defined by the target, and that it therefore needs to write nothing
locally. However, the server will still send messages to the client
for progress reporting purposes.
On the server side, we now support two additional types of backup
targets. There is a 'blackhole' target, which just throws away the
backup data without doing anything at all with it. Naturally, this
should only be used for testing and debugging purposes, since you will
not actually have a backup when it finishes running. More usefully,
there is also a 'server' target, so you can now use something like
'pg_basebackup -Xnone -t server:/SOME/PATH' to write a backup to some
location on the server. We can extend this to more types of targets
in the future, and might even want to create an extensibility
mechanism for adding new target types.
Since WAL fetching is handled with separate client-side logic, it's
not part of this mechanism; thus, backups with non-default targets
must use -Xnone or -Xfetch.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
In the new approach, all files across all tablespaces are sent in a
single COPY OUT operation. The CopyData messages are no longer raw
archive content; rather, each message is prefixed with a type byte
that describes its purpose, e.g. 'n' signifies the start of a new
archive and 'd' signifies archive or manifest data. This protocol
is significantly more extensible than the old approach, since we can
later create more message types, though not without concern for
backward compatibility.
The new protocol sends a few things to the client that the old one
did not. First, it sends the name of each archive explicitly, instead
of letting the client compute it. This is intended to make it easier
to write future patches that might send archives in a format other
that tar (e.g. cpio, pax, tar.gz). Second, it sends explicit progress
messages rather than allowing the client to assume that progress is
defined by the number of bytes received. This will help with future
features where the server compresses the data, or sends it someplace
directly rather than transmitting it to the client.
The old protocol is still supported for compatibility with previous
releases. The new protocol is selected by means of a new
TARGET option to the BASE_BACKUP command. Currently, the
only supported target is 'client'. Support for additional
targets will be added in a later commit.
Patch by me. The patch set of which this is a part has had review
and/or testing from Jeevan Ladhe, Tushar Ahuja, Suraj Kharage,
Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
The base backup code has accumulated a healthy number of new
features over the years, but it's becoming increasingly difficult
to maintain and further enhance that code because there's no
real separation of concerns. For example, the code that
understands knows the details of how we send data to the client
using the libpq protocol is scattered throughout basebackup.c,
rather than being centralized in one place.
To try to improve this situation, introduce a new 'bbsink' object
which acts as a recipient for archives generated during the base
backup progress and also for the backup manifest. This commit
introduces three types of bbsink: a 'copytblspc' bbsink forwards the
backup to the client using one COPY OUT operation per tablespace and
another for the manifest, a 'progress' bbsink performs command
progress reporting, and a 'throttle' bbsink performs rate-limiting.
The 'progress' and 'throttle' bbsink types also forward the data to a
successor bbsink; at present, the last bbsink in the chain will
always be of type 'copytblspc'. There are plans to add more types
of 'bbsink' in future commits.
This abstraction is a bit leaky in the case of progress reporting,
but this still seems cleaner than what we had before.
Patch by me, reviewed and tested by Andres Freund, Sumanta Mukherjee,
Dilip Kumar, Suraj Kharage, Dipesh Pandit, Tushar Ahuja, Mark Dilger,
and Jeevan Ladhe.
Discussion: https://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZvqk7UuzxsX1xjJRmMGkqoUGYTZLDCH8SmU1xTPr1Xig@mail.gmail.com
During a replication slot creation, an ERROR generated in the same
transaction as the one creating a to-be-exported snapshot would have
left the backend in an inconsistent state, as the associated static
export snapshot state was not being reset on transaction abort, but only
on the follow-up command received by the WAL sender that created this
snapshot on replication slot creation. This would trigger inconsistency
failures if this session tried to export again a snapshot, like during
the creation of a replication slot.
Note that a snapshot export cannot happen in a transaction block, so
there is no need to worry resetting this state for subtransaction
aborts. Also, this inconsistent state would very unlikely show up to
users. For example, one case where this could happen is an
out-of-memory error when building the initial snapshot to-be-exported.
Dilip found this problem while poking at a different patch, that caused
an error in this code path for reasons unrelated to HEAD.
Author: Dilip Kumar
Reviewed-by: Michael Paquier, Zhihong Yu
Discussion: https://postgr.es/m/CAFiTN-s0zA1Kj0ozGHwkYkHwa5U0zUE94RSc_g81WrpcETB5=w@mail.gmail.com
Backpatch-through: 9.6
Two functions, both named check_permissions(), used the same checks to
verify if a user had required privileges to work on replication slots.
This commit removes the duplication, and moves the function doing the
checks to slot.c to be centralized.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Euler Taveira
Discussion: https://postgr.es/m/CALj2ACUPpVw1u7sQocFVWrSs0n10pt_G_4NPZKSxXK6cW1dErw@mail.gmail.com
Use one fileset for the entire worker lifetime instead of using
separate filesets for each streaming transaction. Now, the
changes/subxacts files for every streaming transaction will be
created under the same fileset and the files will be deleted
after the transaction is completed.
This patch extends the BufFileOpenFileSet and BufFileDeleteFileSet
APIs to allow users to specify whether to give an error on missing
files.
Author: Dilip Kumar, based on suggestion by Thomas Munro
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Previously, on the subscriber, we set the error context callback for the
tuple data conversion failures. This commit replaces the existing error
context callback with a comprehensive one so that it shows not only the
details of data conversion failures but also the details of logical change
being applied by the apply worker or table sync worker. The additional
information displayed will be the command, transaction id, and timestamp.
The error context is added to an error only when applying a change but not
while doing other work like receiving data etc.
This will help users in diagnosing the problems that occur during logical
replication. It also can be used for future work that allows skipping a
particular transaction on the subscriber.
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Greg Nancarrow, Haiying Tang, Amit Kapila
Tested-by: Haiying Tang
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
In the code, most places used the term "Stream Stop" for the logical
stream message. This commit improves consistency by renaming LogicalRepMsgType
"LOGICAL_REP_MSG_STREAM_END" to "LOGICAL_REP_MSG_STREAM_STOP".
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Commit a8fd13cab0 added support for prepared transactions to built-in
logical replication via a new option "two_phase" for a subscription. The
"two_phase" option was not allowed with the existing streaming option.
This commit permits the combination of "streaming" and "two_phase"
subscription options. It extends the pgoutput plugin and the subscriber
side code to add the prepare API for streaming transactions which will
apply the changes accumulated in the spool-file at prepare time.
Author: Peter Smith and Ajin Cherian
Reviewed-by: Vignesh C, Amit Kapila, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c6550776394e we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
The existing code tried to do syscache lookups in an already-failed
transaction, which is problematic to say the least. After some
consideration of alternatives, the best fix seems to be to just drop
type names from the error message altogether. The table and column
names seem like sufficient localization. If the user is unsure what
types are involved, she can check the local and remote table
definitions.
Having done that, we can also discard the LogicalRepTypMap hash
table, which had no other use. Arguably, LOGICAL_REP_MSG_TYPE
replication messages are now obsolete as well; but we should
probably keep them in case some other use emerges. (The complexity
of removing something from the replication protocol would likely
outweigh any savings anyhow.)
Masahiko Sawada and Bharath Rupireddy, per complaint from Andres
Freund. Back-patch to v10 where this code originated.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
During decoding for speculative inserts, we were relying for cleaning
toast hash on confirmation records or next change records. But that
could lead to multiple problems (a) memory leak if there is neither a
confirmation record nor any other record after toast insertion for a
speculative insert in the transaction, (b) error and assertion failures
if the next operation is not an insert/update on the same table.
The fix is to start queuing spec abort change and clean up toast hash
and change record during its processing. Currently, we are queuing the
spec aborts for both toast and main table even though we perform cleanup
while processing the main table's spec abort record. Later, if we have a
way to distinguish between the spec abort record of toast and the main
table, we can avoid queuing the change for spec aborts of toast tables.
Reported-by: Ashutosh Bapat
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 9.6, where it was introduced
Discussion: https://postgr.es/m/CAExHW5sPKF-Oovx_qZe4p5oM6Dvof7_P+XgsNAViug15Fm99jA@mail.gmail.com
While decoding the multi-insert WAL we can't clean the toast untill we get
the last insert of that WAL record. Now if we stream the changes before we
get the last change, the memory for toast chunks won't be released and we
expect the txn to have streamed all changes after streaming. This
restriction is mainly to ensure the correctness of streamed transactions
and it doesn't seem worth uplifting such a restriction just to allow this
case because anyway we will stream the transaction once such an insert is
complete.
Previously we were using two different flags (one for toast tuples and
another for speculative inserts) to indicate partial changes. Now instead
we replaced both of them with a single flag to indicate partial changes.
Reported-by: Pavan Deolasee
Author: Dilip Kumar
Reviewed-by: Pavan Deolasee, Amit Kapila
Discussion: https://postgr.es/m/CABOikdN-_858zojYN-2tNcHiVTw-nhxPwoQS4quExeweQfG1Ug@mail.gmail.com
The worker.c global wrconn is only meant to be used by logical apply/
tablesync workers, but there are other variables with the same name. To
reduce future confusion rename the global from "wrconn" to
"LogRepWorkerWalRcvConn".
While this is just cosmetic, it seems better to backpatch it all the way
back to 10 where this code appeared, to avoid future backpatching
issues.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Currently, replication slot statistics are updated at prepare, commit, and
rollback. Now, if the transaction is interrupted the stats might not get
updated. Fixed this by updating replication statistics after every
stream/spill.
In passing update the docs to change the description of some of the slot
stats.
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().
Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.
Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Instead of using multiple parameters in parse_ouput_parameters function
signature, use the struct PGOutputData that encapsulates all pgoutput
options. It will be useful for future work where we need to add other
options in pgoutput.
Author: Euler Taveira
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Along with gid, this provides a different way to identify the transaction.
The users that use xid in some way to prepare the transactions can use it
to filter prepare transactions. The later commands COMMIT PREPARED or
ROLLBACK PREPARED carries both identifiers, providing an output plugin the
choice of what to use.
Author: Markus Wanner
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/ee280000-7355-c4dc-e47b-2436e7be959c@enterprisedb.com
While looking at Robert Foggia's report, I noticed a passel of
other issues in the same area:
* The scheme for backslash-quoting newlines in pathnames is just
wrong; it will misbehave if the last ordinary character in a pathname
is a backslash. I'm not sure why we're bothering to allow newlines
in tablespace paths, but if we're going to do it we should do it
without introducing other problems. Hence, backslashes themselves
have to be backslashed too.
* The author hadn't read the sscanf man page very carefully, because
this code would drop any leading whitespace from the path. (I doubt
that a tablespace path with leading whitespace could happen in
practice; but if we're bothering to allow newlines in the path, it
sure seems like leading whitespace is little less implausible.) Using
sscanf for the task of finding the first space is overkill anyway.
* While I'm not 100% sure what the rationale for escaping both \r and
\n is, if the idea is to allow Windows newlines in the file then this
code failed, because it'd throw an error if it saw \r followed by \n.
* There's no cross-check for an incomplete final line in the map file,
which would be a likely apparent symptom of the improper-escaping
bug.
On the generation end, aside from the escaping issue we have:
* If needtblspcmapfile is true then do_pg_start_backup will pass back
escaped strings in tablespaceinfo->path values, which no caller wants
or is prepared to deal with. I'm not sure if there's a live bug from
that, but it looks like there might be (given the dubious assumption
that anyone actually has newlines in their tablespace paths).
* It's not being very paranoid about the possibility of random stuff
in the pg_tblspc directory. IMO we should ignore anything without an
OID-like name.
The escaping rule change doesn't seem back-patchable: it'll require
doubling of backslashes in the tablespace_map file, which is basically
a basebackup format change. The odds of that causing trouble are
considerably more than the odds of the existing bug causing trouble.
The rest of this seems somewhat unlikely to cause problems too,
so no back-patch.
Commit 0aa8a01d04 extends the output plugin API to allow decoding of
prepared xacts and allowed the user to enable/disable the two-phase option
via pg_logical_slot_get_changes(). This can lead to a problem such that
the first time when it gets changes via pg_logical_slot_get_changes()
without two_phase option enabled it will not get the prepared even though
prepare is after consistent snapshot. Now next time during getting changes,
if the two_phase option is enabled it can skip prepare because by that
time start decoding point has been moved. So the user will only get commit
prepared.
Allow to enable/disable this option at the create slot time and default
will be false. It will break the existing slots which is fine in a major
release.
Author: Ajin Cherian
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
In commit a271a1b50e, we allowed decoding at prepare time and the prepare
was decoded again if there is a restart after decoding it. It was done
that way because we can't distinguish between the cases where we have not
decoded the prepare because it was prior to consistent snapshot or we have
decoded it earlier but restarted. To distinguish between these two cases,
we have introduced an initial_consistent_point at the slot level which is
an LSN at which we found a consistent point at the time of slot creation.
This is also the point where we have exported a snapshot for the initial
copy. So, prepare transaction prior to this point are sent along with
commit prepared.
This commit bumps SNAPBUILD_VERSION because of change in SnapBuild. It
will break existing slots which is fine in a major release.
Author: Ajin Cherian, based on idea by Andres Freund
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.
There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.
This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.
The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.
This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.
Bump catalog version due to change of state in the catalog
(pg_subscription_rel).
Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com
Currently, we get the origin id from the name and then drop the origin by
taking ExclusiveLock on ReplicationOriginRelationId. So, two concurrent
sessions can get the id from the name at the same time and then when they
try to drop the origin, one of the sessions will get the either
"tuple concurrently deleted" or "cache lookup failed for replication
origin ..".
To prevent this race condition we do the entire operation under lock. This
obviates the need for replorigin_drop() API and we have removed it so if
any extension authors are using it they need to instead use
replorigin_drop_by_name. See it's usage in pg_replication_origin_drop().
Author: Peter Smith
Reviewed-by: Amit Kapila, Euler Taveira, Petr Jelinek, and Alvaro
Herrera
Discussion: https://www.postgresql.org/message-id/CAHut%2BPuW8DWV5fskkMWWMqzt-x7RPcNQOtJQBp6SdwyRghCk7A%40mail.gmail.com
This patch allows PREPARE-time decoding of two-phase transactions (if the
output plugin supports this capability), in which case the transactions
are replayed at PREPARE and then committed later when COMMIT PREPARED
arrives.
Now that we decode the changes before the commit, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We detect such failures with a special sqlerrcode
ERRCODE_TRANSACTION_ROLLBACK introduced by commit 7259736a6e and stop
decoding the remaining changes. Then we rollback the changes when rollback
prepared is encountered.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, Arseny Sher, and Dilip Kumar
Tested-by: Takamichi Osumi
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
This adds six methods to the output plugin API, adding support for
streaming changes of two-phase transactions at prepare time.
* begin_prepare
* filter_prepare
* prepare
* commit_prepared
* rollback_prepared
* stream_prepare
Most of this is a simple extension of the existing methods, with the
semantic difference that the transaction is not yet committed and maybe
aborted later.
Until now two-phase transactions were translated into regular transactions
on the subscriber, and the GID was not forwarded to it. None of the
two-phase commands were communicated to the subscriber.
This patch provides the infrastructure for logical decoding plugins to be
informed of two-phase commands Like PREPARE TRANSACTION, COMMIT PREPARED
and ROLLBACK PREPARED commands with the corresponding GID.
This also extends the 'test_decoding' plugin, implementing these new
methods.
This commit simply adds these new APIs and the upcoming patch to "allow
the decoding at prepare time in ReorderBuffer" will use these APIs.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, and Dilip Kumar
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
Two new routines to allocate a hash context and to free it are created,
as these become necessary for the goal behind this refactoring: switch
the all cryptohash implementations for OpenSSL to use EVP (for FIPS and
also because upstream does not recommend the use of low-level cryptohash
functions for 20 years). Note that OpenSSL hides the internals of
cryptohash contexts since 1.1.0, so it is necessary to leave the
allocation to OpenSSL itself, explaining the need for those two new
routines. This part is going to require more work to properly track
hash contexts with resource owners, but this not introduced here.
Still, this refactoring makes the move possible.
This reduces the number of routines for all SHA2 implementations from
twelve (SHA{224,256,386,512} with init, update and final calls) to five
(create, free, init, update and final calls) by incorporating the hash
type directly into the hash context data.
The new cryptohash routines are moved to a new file, called cryptohash.c
for the fallback implementations, with SHA2 specifics becoming a part
internal to src/common/. OpenSSL specifics are part of
cryptohash_openssl.c. This infrastructure is usable for more hash
types, like MD5 or HMAC.
Any code paths using the internal SHA2 routines are adapted to report
correctly errors, which are most of the changes of this commit. The
zones mostly impacted are checksum manifests, libpq and SCRAM.
Note that e21cbb4 was a first attempt to switch SHA2 to EVP, but it
lacked the refactoring needed for libpq, as done here.
This patch has been tested on Linux and Windows, with and without
OpenSSL, and down to 1.0.1, the oldest version supported on HEAD.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
In streaming mode, the transaction can be decoded in multiple streams and
those streams can be interleaved with streams of other transactions. So,
we can't remember the transaction's write status in the logical decoding
context because that might get changed due to some other transactions and
lead to wrong answers for 'skip-empty-xacts' option. We decided to keep
each transaction's write status in the ReorderBufferTxn to avoid
interleaved streams changing the status of some unrelated transactions.
Diagnosed-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LR7=XNM_TLmpZMFuV8ZQpoxkem--NZJYf8YXmesbvwLA@mail.gmail.com
Logical replication protocol uses a single byte character to identify a
message type in logical replication protocol. The code uses string
literals for the same. Use Enum so that
1. All the string literals used can be found at a single place. This
makes it easy to add more types without the risk of conflicts.
2. It's easy to locate the code handling a given message type.
3. When used with switch statements, it is easy to identify the missing
cases using -Wswitch.
Author: Ashutosh Bapat
Reviewed-by: Kyotaro Horiguchi, Andres Freund, Peter Smith and Amit Kapila
Discussion: https://postgr.es/m/CAExHW5uPzQ7L0oAd_ENyvaiYMOPgkrAoJpE+ZY5-obdcVT6NPg@mail.gmail.com
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
during logical decoding.
Prior to commit c55040ccd0 we have no way of knowing the invalidations
before commit. So, while decoding we use to execute all the invalidations
at each command end as we had no way of knowing which invalidations
happened before that command. Due to this, transactions involving large
amounts of DDLs use to take more time and also lead to high CPU usage. But
now we know specific invalidations at each command end so we execute only
required invalidations.
It has been observed that decoding of a transaction containing truncation
of a table with 1000 partitions would be finished in 1s whereas before
this patch it used to take 4-5 minutes.
Author: Dilip Kumar
Reviewed-by: Amit Kapila and Keisuke Kuroda
Discussion: https://postgr.es/m/CANDwggKYveEtXjXjqHA6RL3AKSHMsQyfRY6bK+NqhAWJyw8psQ@mail.gmail.com
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats and call pg_stat_reset_replication_slot to reset the stats of
a particular slot. Users can pass NULL in pg_stat_reset_replication_slot
to reset stats of all the slots.
This commit extends the statistics collector to track this information
about slots.
Author: Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
Commit 464824323e changed the logical replication protocol to allow the
streaming of in-progress transactions and used the new version of protocol
irrespective of the server version. Use the appropriate version of the
protocol based on the server version.
Reported-by: Ashutosh Sharma
Author: Dilip Kumar
Reviewed-by: Ashutosh Sharma and Amit Kapila
Discussion: https://postgr.es/m/CAE9k0P=9OpXcNrcU5Gsvd5MZ8GFpiN833vNHzX6Uc=8+h1ft1Q@mail.gmail.com
