Starting on 2023-08-03, this intermittently terminated a "pgbench -C"
test in CI. It could affect a high-client-count "pgbench" without "-C".
While parallel reindexdb and vacuumdb reach the same problematic check,
sufficient client count and/or connection turnover is less plausible for
them. Given the lack of examples from the buildfarm or from manual
builds, reproducing this must entail rare operating system
configurations. Also correct the associated error message, which was
wrong for non-Windows. Back-patch to v12, where the pgbench check first
appeared. While v11 vacuumdb has the problematic check, reaching it
with typical vacuumdb usage is implausible.
Reviewed by Thomas Munro.
Discussion: https://postgr.es/m/CA+hUKG+JwvTNdcyJTriy9BbtzF1veSRQ=9M_ZKFn9_LqE7Kp7Q@mail.gmail.com
In a selective restore, ACLs for a table should be dumped if the
table is selected to be dumped. However, if the table has both
table-level and column-level ACLs, only the table-level ACL was
restored. This happened because _tocEntryRequired assumed that
an ACL could have only one dependency (the one on its table),
and punted if there was more than one. But since commit ea9125304,
column-level ACLs also depend on the table-level ACL if any, to
ensure correct ordering in parallel restores. To fix, adjust the
logic in _tocEntryRequired to ignore dependencies on ACLs.
I extended a test case in 002_pg_dump.pl so that it purports to
test for this; but in fact the test passes even without the fix.
That's because this bug only manifests during a selective restore,
while the scenarios 002_pg_dump.pl tests include only selective dumps.
Perhaps somebody would like to extend the script so that it can test
scenarios including selective restore, but I'm not touching that.
Euler Taveira and Tom Lane, per report from Kong Man.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/DM4PR11MB73976902DBBA10B1D652F9498B06A@DM4PR11MB7397.namprd11.prod.outlook.com
For some reason I used not_like = { pg_dumpall_dbprivs => 1, } in the test
condition of one of the tests added in in c66a7d75e65. That doesn't make sense
for two reasons: 1) not_like isn't a valid test condition 2) the database
should not be dumped in any of the tests. Due to 1), the test achieved its
goal, but clearly the formulation is confusing. Instead use like => {}, with
a comment explaining why.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/3ddf79f2-8b7b-a093-11d2-5c739bc64f86@eisentraut.org
Backpatch: 11-, like c66a7d75e65
The --help output stated that schemas were specified using PATTERN
when they in fact aren't pattern matched but are required to be
exact matches. This changes to SCHEMA to make that clear.
Backpatch through v16 where this was introduced.
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qp9mXPQd5D6s6CJxvmignsbTqGZwDDB6VYJOn1A8WG38w@mail.gmail.com
Backpatch-through: 16
When specifying multiple schemas to exclude with -N parameters, none
of the schemas are actually excluded (a single -N worked as expected).
This fixes the catalog query to handle multiple exclusions and adds a
test for this case.
Backpatch to v16 where this was introduced.
Author: Nathan Bossart <nathandbossart@gmail.com>
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Reported-by: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qp9mXPQd5D6s6CJxvmignsbTqGZwDDB6VYJOn1A8WG38w@mail.gmail.com
Backpatch-through: 16
Commit cda6a8d01d39 removed a few datatypes, but didn't update
pg_upgrade --check to throw error if these types are used. So the users
find that pg_upgrade --check tells them that everything is fine, only to
fail when the real upgrade is attempted.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Reviewed-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Discussion: https://postgr.es/m/202309201654.ng4ksea25mti@alvherre.pgsql
ae78cae3b added the --buffer-usage-limit to vacuumdb to allow it to
include the BUFFER_USAGE_LIMIT option in the VACUUM command.
Unfortunately, that commit forgot to adjust the code so the option was
added to the ANALYZE command when the -Z command line argument was
specified.
There were no issues with the -z command as that option just adds
ANALYZE to the VACUUM command.
In passing adjust the code to escape the --buffer-usage-limit option
before passing it to the server. It seems nothing beyond a confusing
error message could become this lack of escaping as VACUUM cannot be
specified in a multi-command string.
Reported-by: Ryoga Yoshida
Author: Ryoga Yoshida, David Rowley
Discussion: https://postgr.es/m/08930c0b541700a5264e5fbf3a685f5a%40oss.nttdata.com
Backpatch-through: 16, where ae78cae3b was introduced.
This changes 020_cancel.pl so as the test is entirely skipped on
Windows. This test was already doing nothing under WIN32, except
initializing and starting a node without using it so this shaves a few
test cycles.
Author: Yugo NAGATA
Reviewed-by: Fabien Coelho
Discussion: https://postgr.es/m/20230810125935.22c2922ea5250ba79358965b@sraoss.co.jp
Backpatch-through: 15
pgbouncer can cause PQbackendPID() to return negative values due to it
filling be_pid with random bytes (even these days pid_max can only be
set up to 2^22 on 64b machines on Linux, for example, so this cannot
happen with normal PID numbers). When this happens, pg_basebackup may
generate a temporary slot name that may not be accepted by the parser,
leading to spurious failures, like:
pg_basebackup: error: could not send replication command
ERROR: replication slot name "pg_basebackup_-1201966863" contains
invalid character
This commit fixes that problem by formatting the result from
PQbackendPID() as an unsigned integer when creating the temporary
replication slot name, so as the invalid character is gone and the
command can be parsed.
Author: Jelte Fennema
Reviewed-by: Daniel Gustafsson, Nishant Sharma
Discussion: https://postgr.es/m/CAGECzQQOGvYfp8ziF4fWQ_o8s2K7ppaoWBQnTmdakn3s-4Z=5g@mail.gmail.com
Backpatch-through: 11
Commit 7b378237aa added a status message to pg_upgrade that is 60
characters wide. Since the MESSAGE_WIDTH macro is currently set to
60, there is no space between this new status message and the "ok"
or "failed" indicator appended when the step completes. To fix
this problem, this commit increases the value of MESSAGE_WIDTH to
62.
Suggested-by: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/CALj2ACVVvk1cYLtWVxHv%3DZ1Ubq%3DUES9fhKbUU4c9k4W%2BfEDnbw%40mail.gmail.com
Backpatch-through: 16
With the addition of INHERIT and SET options for role grants,
the historical display of role memberships in \du/\dg is woefully
inadequate. Besides those options, there are pre-existing
shortcomings that you can't see the ADMIN option nor the grantor.
To fix this, remove the "Member of" column from \du/\dg altogether
(making that output usefully narrower), and invent a new meta-command
"\drg" that is specifically for displaying role memberships. It
shows one row for each role granted to the selected role(s), with
the grant options and grantor.
We would not normally back-patch such a feature addition post
feature freeze, but in this case the change is mainly driven by
v16 changes in the server, so it seems appropriate to include it
in v16.
Pavel Luzanov, with bikeshedding and review from a lot of people,
but particularly David Johnston
Discussion: https://postgr.es/m/b9be2d0e-a9bc-0a30-492f-a4f68e4f7740@postgrespro.ru
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
Commit e213de8e78 fixed a problem with path lengths to a tempdir on
Windows, but caused problems on at least some Unix systems where the
system tempdir is on a different file system. To work around this, only
used the system temdir for the destination of pg_replslot on Windows,
and otherwise restore the old behaviour.
Backpatch to relase 14 like the previous patch.
Problem exposed by a myriad of buildfarm animals.
The symlink to a longer location tripped up some Windows limit on
buildfarm animal fairywren when running with meson, which uses slightly
longer paths.
Backpatch to all live branches to keep the script in sync.
This reverts the following commits: 4dbdb82513, c2122aae63,
5b1a879943, 9e1e9d6560, ff9618e82a, 60684dd834, 4441fc704d,
and b5d6382496. A role with the MAINTAIN privilege may be able to
use search_path tricks to escalate privileges to the table owner.
Unfortunately, it is too late in the v16 development cycle to apply
the proposed fix, i.e., restricting search_path when running
maintenance commands.
Bumps catversion.
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/E1q7j7Y-000z1H-Hr%40gemulon.postgresql.org
Backpatch-through: 16
On Windows, it's sometimes difficult to create a file with a path longer
than 255 chars, and if it can be created it might not be seen by the
archiver. This can be triggered by the test for tar backups with
filenames greater than 100 bytes. So we skip that test if the path would
exceed 255.
Backpatch to all live branches.
Reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/666ac55b-3400-fb2c-2cea-0281bf36a53c@dunslane.net
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
Not including the timeline IDs to the file names generated by pg_waldump
for the individual blocks saved could cause some of these files to be
overwritten when scanning segments across multiple timelines. Having
this information is also as much useful as the LSNs, to be able to know
from exactly which WAL segment a block is comes from.
While on it, this fixes a few comments in the tests, where the format of
the file was not described as matching with the reality.
Reported-by: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, David Christensen
Discussion: https://postgr.es/m/ZJp921+nITFnvBVS@paquier.xyz
Older versions of ICU canonicalize "C" to "en-US-u-va-posix"; but
starting in ICU version 64, the "C" locale is considered
obsolete. Postgres commit ea1db8ae70 introduced code to always
canonicalize "C" to "en-US-u-va-posix" for consistency and
convenience, but it was deemed too confusing.
This commit removes that code, so that "C" is treated like other ICU
locale names: canonicalization is attempted, and if it fails, the
behavior is controlled by icu_validation_level.
A similar change was previously committed as f7faa9976c, then reverted
due to an ICU-version-dependent test failure. This commit un-reverts
it, omitting the test because we now expect the behavior to depend on
the version of ICU being used.
Discussion: https://postgr.es/m/3a200aca-4672-4b37-fc91-5d198a323503%40eisentraut.org
Discussion: https://postgr.es/m/f83f089ee1e9acd5dbbbf3353294d24e1f196e95.camel@j-davis.com
Discussion: https://postgr.es/m/37520ec1ae9591f83132f82dbd625f3fc2d69c16.camel@j-davis.com
Run pgindent and pgperltidy. It seems we're still some ways
away from all committers doing this automatically. Now that
we have a buildfarm animal that will whine about poorly-indented
code, we'll try to keep the tree more tidy.
Discussion: https://postgr.es/m/3156045.1687208823@sss.pgh.pa.us
For CREATE DATABASE, make LOCALE parameter apply regardless of the
provider used. Also affects initdb and createdb --locale arguments.
Previously, LOCALE (and --locale) only affected the database default
collation when using the libc provider.
Discussion: https://postgr.es/m/1a63084d-221e-4075-619e-6b3e590f673e@enterprisedb.com
Reviewed-by: Peter Eisentraut
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
A new-style SQL function can contain a parse-time dependency
on a unique index, much as views and matviews can (such cases
arise from GROUP BY and ON CONFLICT clauses, for example).
To dump and restore such a function successfully, pg_dump must
postpone the function until after the unique index is created,
which will happen in the post-data part of the dump. Therefore
we have to remove the normal constraint that functions are
dumped in pre-data. Add code similar to the existing logic
that handles this for matviews. I added test cases for both
as well, since code coverage tests showed that we weren't
testing the matview logic.
Per report from Sami Imseih. Back-patch to v14 where
new-style SQL functions came in.
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
Two places in pg_dump_sort.c were using pg_log_info() to add
more details to a message printed with pg_log_warning().
This is bad, because at default verbosity level we would
print the warning line but not the details. One should use
pg_log_warning_detail() or pg_log_warning_hint() instead.
Commit 9a374b77f got rid of most such abuses, but unaccountably
missed these.
Noted while studying a bug report from Sami Imseih.
Back-patch to v15 where 9a374b77f came in. (Prior versions
don't have the missing-details misbehavior, for reasons
I didn't bother to track down.)
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
2dcd1578c4 left the --role option undocumented, which is
inconsistent with other deprecated options such as pg_dump's
--blobs and --no-blobs. This change adds --role back to
createuser's documentation and usage output and marks it as
deprecated.
Suggested-by: Peter Eisentraut
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0e85c9e7-4804-1cdb-5a4a-c72c328f9ad8%40enterprisedb.com
This change renames --admin to --with-admin, --role to --member-of,
and --member to --with-member. Many people found the previous
names to be confusing. The --admin and --member options are new in
v16, but --role has been there for a while, so that one has been
kept (but left undocumented) for backward compatibility.
Suggested-by: Peter Eisentraut
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/ZFvVZvQDliIWmOwg%40momjian.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Fixes memory error in cases where the length of the language name
returned by uloc_getLanguage() is exactly ULOC_LANG_CAPACITY, in which
case the status is set to U_STRING_NOT_TERMINATED_WARNING.
Also check in call sites for other ICU functions that are expected to
return a C string to be safe (no bug is known at these other call
sites).
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/2098874d-c111-41e4-9063-30bcf135226b@gmail.com
