The previous approach was to search-and-destroy all \r occurrences
no matter what. That seems more likely to hide bugs than anything
else; indeed it seems to be hiding one now. Fix things so that
we only transform \r\n to \n.
Side effects: must do this before, not after, chomp'ing if we're
going to chomp, else we'd fail to clean up a trailing \r\n. Also,
remove safe_psql's redundant repetition of what psql already did;
else it might reduce \r\r\n to \n, which is exactly the scenario
I'm hoping to expose.
Perhaps this should be back-patched, but for now I'm content to
see what happens in HEAD.
Discussion: https://postgr.es/m/412ae8da-76bb-640f-039a-f3513499e53d@gmx.net
I neglected to test this scenario while preparing commit f3faf35f3,
so of course it was broken, thanks to some very obscure and undocumented
code in pg_dump. Pre-v12 databases might have toast tables attached to
partitioned tables, which we need to ignore since newer servers never
create such useless toast tables. There was a filter for this case in
binary_upgrade_set_type_oids_by_rel_oid(), which appeared to just
prevent the pg_type OID from being copied. But actually it managed to
prevent the toast table from being created at all --- or it did before
I took out that logic. But that was a fundamentally bizarre place to be
making the test in the first place. The place where the filter should
have been, one would think, is binary_upgrade_set_pg_class_oids(), so
add it there.
While at it, reorganize binary_upgrade_set_pg_class_oids() so that it
doesn't make a completely useless query when it knows it's being
invoked for an index. And correct a comment that mis-described the
scenario where we need to force creation of a TOAST table.
Per buildfarm.
Commit f7f70d5e2 left one inconsistency behind: we're still creating
pg_type entries for the composite types of sequences and toast tables,
but not arrays over those composites. But there seems precious little
reason to have named composite types for toast tables, and not much more
to have them for sequences (especially given the thought that sequences
may someday not be standalone relations at all).
So, let's close that inconsistency by removing these composite types,
rather than adding arrays for them. This buys back a little bit of
the initial pg_type bloat added by the previous patch, and could be
a significant savings in a large database with many toast tables.
Aside from a small logic rearrangement in heap_create_with_catalog,
this patch mostly needs to clean up some places that were assuming that
pg_class.reltype always has a valid value. Those are really pre-existing
bugs, given that it's documented otherwise; notably, the plpgsql changes
fix code that gives "cache lookup failed for type 0" on indexes today.
But none of these seem interesting enough to back-patch.
Also, remove the pg_dump/pg_upgrade infrastructure for propagating
a toast table's pg_type OID into the new database, since we no longer
need that.
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
Both INDEX_CLEANUP and TRUNCATE have been available since v12, and are
enabled by default except if respectively vacuum_index_cleanup and
vacuum_truncate are disabled for a given relation. This change adds
support for disabling these options from vacuumdb.
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/6F7F17EF-B1F2-4681-8D03-BA96365717C0@amazon.com
A few places calling fwrite and gzwrite were not setting errno to ENOSPC
when reporting errors, as is customary; this led to some failures being
reported as
"could not write file: Success"
which makes us look silly. Make a few of these places in pg_dump and
pg_basebackup use our customary pattern.
Backpatch-to: 9.5
Author: Justin Pryzby <pryzby@telsasoft.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200611153753.GU14879@telsasoft.com
Non-zero vacuum_defer_cleanup_age values cause pg_upgrade freezing of
the system catalogs to be incomplete, or do nothing. This will cause
the upgrade to fail in confusing ways.
Reported-by: Laurenz Albe
Discussion: https://postgr.es/m/7d6f6c22ba05ce0c526e9e8b7bfa8105e7da45e6.camel@cybertec.at
Backpatch-through: 9.5
Introduce TAR_BLOCK_SIZE and replace many instances of 512 with
the new constant. Introduce function tarPaddingBytesRequired
and use it to replace numerous repetitions of (x + 511) & ~511.
Add preprocessor guards against multiple inclusion to pgtar.h.
Reformat the prototype for tarCreateHeader so it doesn't extend
beyond 80 characters.
Discussion: http://postgr.es/m/CA+TgmobWbfReO9-XFk8urR1K4wTNwqoHx_v56t7=T8KaiEoKNw@mail.gmail.com
Using --outputdir with a custom output repository has never created by
default the sql/ and expected/ paths generated with contents from
respectively input/ and output/ if they don't exist, while the base
output directory gets created if it does not exist. If sql/ and
expected/ are not present, pg_regress would fail with the path missing,
requiring test scripts to create those extra paths by themselves. This
commit changes pg_regress so as both get created by default if they do
not exist, removing the need for external test scripts to do so.
This cleans up two code paths in the tree for pg_upgrade tests in MSVC
and environments able to use test.sh. sql/ and expected/ were created
as part of each test script, but this is not needed anymore as
pg_regress handles the work now.
Author: Roman Zharkov, Daniel Gustafsson
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/16484-4d89e9cc11241996@postgresql.org
Remove some code relevant only for dumping from pre-7.1 servers,
support for which had already been removed by
64f3524e2c8deebc02808aa5ebdfa17859473add.
fe_archive.c was compiled only for the frontend in src/common/, but as
it will never share anything with the backend, it makes most sense to
move this file to src/fe_utils/.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/e9766d71-8655-ac86-bdf6-77e0e7169977@2ndquadrant.com
Backpatch-through: 13
As it stands, this flag is only set when we've successfully sent a
cancel request, not if we get SIGINT and then fail to send a cancel.
However, for almost all callers, that's the Wrong Thing: we'd prefer
to abort processing after control-C even if no cancel could be sent.
As an example, since commit 1d468b9ad "pgbench -i" fails to give up
sending COPY data even after control-C, if the postmaster has been
stopped, which is clearly not what the code intends and not what anyone
would want. (The fact that it keeps going at all is the fault of a
separate bug in libpq, but not letting CancelRequested become set is
clearly not what we want here.)
The sole exception, as far as I can find, is that scripts_parallel.c's
ParallelSlotsGetIdle tries to consume a query result after issuing a
cancel, which of course might not terminate quickly if no cancel
happened. But that behavior was poorly thought out too. No user of
ParallelSlotsGetIdle tries to continue processing after a cancel,
so there is really no point in trying to clear the connection's state.
Moreover this has the same defect as for other users of cancel.c,
that if the cancel request fails for some reason then we end up with
control-C being completely ignored. (On top of that, select_loop failed
to distinguish clearly between SIGINT and other reasons for select(2)
failing, which means that it's possible that the existing code would
think that a cancel has been sent when it hasn't.)
Hence, redefine CancelRequested as simply meaning that SIGINT was
received. We could add a second flag with the other meaning, but
in the absence of any compelling argument why such a flag is needed,
I think it would just offer an opportunity for future callers to
get it wrong. Also remove the consumeQueryResult call in
ParallelSlotsGetIdle's failure exit. In passing, simplify the
API of select_loop.
It would now be possible to re-unify psql's cancel_pressed with
CancelRequested, partly undoing 5d43c3c54. But I'm not really
convinced that that's worth the trouble, so I left psql alone,
other than fixing a misleading comment.
This code is new in v13 (cf a4fd3aa71), so no need for back-patch.
Per investigation of a complaint from Andres Freund.
Discussion: https://postgr.es/m/20200603201242.ofvm4jztpqytwfye@alap3.anarazel.de
The preferred terminology has been support "function", not procedure,
for some time, so change that over. The command stays \dAp, since
\dAf is already something else.
Make number of translate_columns elements match the number of output columns.
The only "true" value, which was previously specified, seems to be intended
for opfamily operator "purpose" column. But that column has already translated
values substituted. So, all elements in translate_columns[] should be "false".
This commit changes ORDER BY clause for \dAo and \dAp psql commands in
the following way.
* Operators for the same types are grouped together.
* Same-class operators and procedures are listed before cross-class operators
and procedures.
Modification of ORDER BY clause for \dAp required removing DISTINCT clause,
which doesn't seem to affect anything.
Discussion: https://postgr.es/m/20200511210856.GA18368%40alvherre.pgsql
Author: Alvaro Herrera revised by me
Reviewed-by: Alexander Korotkov, Nikita Glukhov
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The defect suppressed a Standby Status Update message when bytes flushed
to disk had changed but bytes received had not changed. If
pg_recvlogical then exited with no intervening Standby Status Update,
the next pg_recvlogical repeated already-flushed records. The defect
could also cause superfluous messages, which are functionally harmless.
Back-patch to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20200502221647.GA3941274@rfd.leadboat.com
pg_recvlogical merely called PQfinish(), so the backend sent messages
after the disconnect. When that caused EPIPE in internal_flush(),
before a LogicalConfirmReceivedLocation(), the next pg_recvlogical would
repeat already-acknowledged records. Whether or not the defect causes
EPIPE, post-disconnect messages could contain an ErrorResponse that the
user should see. One properly ends PGRES_COPY_OUT by repeating
PQgetCopyData() until it returns a negative value. Augment one of the
tests to cover the case of WAL past --endpos. Back-patch to v10, where
commit 7c030783a5bd07cadffc2a1018bc33119a4c7505 first appeared. Before
that commit, pg_recvlogical never reached PGRES_COPY_OUT.
Reported by Thomas Munro.
Discussion: https://postgr.es/m/CAEepm=1MzM2Z_xNe4foGwZ1a+MO_2S9oYDq3M5D11=JDU_+0Nw@mail.gmail.com
* Have both physical and logical walsender share a 'xlogreader' state
struct for tracking state. This replaces the existing globals sendSeg
and sendCxt.
* Change WALRead not to receive XLogReaderState->seg and ->segcxt as
separate arguments anymore; just use the ones from 'state'. This is
made possible by the above change.
* have the XLogReader segment_open contract require the callbacks to
install the file descriptor in the state struct themselves instead of
returning it. xlogreader was already ignoring any possible failed
return from the callbacks, relying solely on them never returning.
(This point is not altogether excellent, as it means the callbacks
have to know more of XLogReaderState; but to really improve on that
we would have to pass back error info from the callbacks to
xlogreader. And the complexity would not be saved but instead just
transferred to the callers of WALRead, which would have to learn how
to throw errors from the open_segment callback in addition of, as
currently, from pg_pread.)
* segment_open no longer receives the 'segcxt' as a separate argument,
since it's part of the XLogReaderState argument.
Per comments from Kyotaro Horiguchi.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200511203336.GA9913@alvherre.pgsql
Code review for 0dc8ead46363, prompted by a bug closed by 91c40548d5f7.
XLogReader's system for opening and closing segments had gotten too
complicated, with callbacks being passed at both the XLogReaderAllocate
level (read_page) as well as at the WALRead level (segment_open). This
was confusing and hard to follow, so restructure things so that these
callbacks are passed together at XLogReaderAllocate time, and add
another callback to the set (segment_close) to make it a coherent whole.
Also, ensure XLogReaderState is an argument to all the callbacks, so
that they can grab at the ->private data if necessary.
Document the whole arrangement more clearly.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200422175754.GA19858@alvherre.pgsql
There were a few different ways to line-wrap the error messages. Make
them all the same, and use placeholders for the actual program names,
to save translation work.
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
When pg_basebackup -R is used, we inject standby.signal into the
tar file for the main tablespace. The proper thing to do is to pad
each file injected into the tar file out to a 512-byte boundary
by appending nulls, but here the file is of length 0 and we add
511 zero bytes. Since 0 is already a multiple of 512, we should
not add any zero bytes. Do that instead.
Patch by me, reviewed by Tom Lane.
Discussion: http://postgr.es/m/CA+TgmobWbfReO9-XFk8urR1K4wTNwqoHx_v56t7=T8KaiEoKNw@mail.gmail.com
