This commit adds support for using syncfs() in fsync_pgdata() and
fsync_dir_recurse() (which have been renamed to sync_pgdata() and
sync_dir_recurse()). Like recovery_init_sync_method,
sync_pgdata() calls syncfs() for the data directory, each
tablespace, and pg_wal (if it is a symlink). For now, all of the
frontend utilities that use these support functions are hard-coded
to use fsync(), but a follow-up commit will allow specifying
syncfs().
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
This commit renames RecoveryInitSyncMethod to DataDirSyncMethod and
moves it to common/file_utils.h. This is preparatory work for a
follow-up commit that will allow specifying the synchronization
method in frontend utilities such as pg_upgrade and pg_basebackup.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZN2ZB4afQ2JbR9TA%40paquier.xyz
Presently, frontend code that needs to use these macros must either
include storage/fd.h, which declares several frontend-unsafe
functions, or duplicate the macros. This commit moves these macros
to common/file_utils.h, which is safe for both frontend and backend
code. Consequently, we can also remove the duplicated macros in
pg_checksums and stop including storage/fd.h in pg_rewind.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZOP5qoUualu5xl2Z%40paquier.xyz
zstd compression supports a special mode for finding matched in distant
past, which may result in better compression ratio, at the expense of
using more memory (the window size is 128MB).
To enable this optional mode, use the "long" keyword when specifying the
compression method (--compress=zstd:long).
Author: Justin Pryzby
Reviewed-by: Tomas Vondra, Jacob Champion
Discussion: https://postgr.es/m/20230224191840.GD1653@telsasoft.com
Discussion: https://postgr.es/m/20220327205020.GM28503@telsasoft.com
Replace the hardcoded value with a GUC such that the iteration
count can be raised in order to increase protection against
brute-force attacks. The hardcoded value for SCRAM iteration
count was defined to be 4096, which is taken from RFC 7677, so
set the default for the GUC to 4096 to match. In RFC 7677 the
recommendation is at least 15000 iterations but 4096 is listed
as a SHOULD requirement given that it's estimated to yield a
0.5s processing time on a mobile handset of the time of RFC
writing (late 2015).
Raising the iteration count of SCRAM will make stored passwords
more resilient to brute-force attacks at a higher computational
cost during connection establishment. Lowering the count will
reduce computational overhead during connections at the tradeoff
of reducing strength against brute-force attacks.
There are however platforms where even a modest iteration count
yields a too high computational overhead, with weaker password
encryption schemes chosen as a result. In these situations,
SCRAM with a very low iteration count still gives benefits over
weaker schemes like md5, so we allow the iteration count to be
set to one at the low end.
The new GUC is intentionally generically named such that it can
be made to support future SCRAM standards should they emerge.
At that point the value can be made into key:value pairs with
an undefined key as a default which will be backwards compatible
with this.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F72E7BC7-189F-4B17-BF47-9735EB72C364@yesql.se
The following changes are made to pg_write_zeros(), the API able to
write series of zeros using vectored I/O:
- Add of an "offset" parameter, to write the size from this position
(the 'p' of "pwrite" seems to mean position, though POSIX does not
outline ythat directly), hence the name of the routine is incorrect if
it is not able to handle offsets.
- Avoid memset() of "zbuffer" on every call.
- Avoid initialization of the whole IOV array if not needed.
- Group the trailing write() call with the main write() call,
simplifying the function logic.
Author: Andres Freund
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/20230215005525.mrrlmqrxzjzhaipl@awork3.anarazel.de
Switch pg_dump to use the Compression API, implemented by bf9aa490db.
The CompressFileHandle replaces the cfp* family of functions with a
struct of callbacks for accessing (compressed) files. This allows adding
new compression methods simply by introducing a new struct instance with
appropriate implementation of the callbacks.
Archives compressed using custom compression methods store an identifier
of the compression algorithm in their header instead of the compression
level. The header version is bumped.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Rachel Heaton, Justin Pryzby, Tomas Vondra
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss%3D%40protonmail.com
This reverts commits 24c35ec and 57169ad. PreRestoreCommand() and
PostRestoreCommand() need to be put closer to the system() call calling
a restore_command, as they enable in_restore_command for the startup
process which would in turn trigger an immediate proc_exit() in the
SIGTERM handler. Perhaps we could get rid of this behavior entirely,
but 24c35ec has made the window where the flag is enabled much larger
than it was, and any Postgres-like actions (palloc, etc.) taken by code
paths while the flag is enabled could lead to more severe issues in the
shutdown processing.
Note that curculio has showed that there are much more problems in this
area, unrelated to this change, actually, hence the issues related to
that had better be addressed first. Keeping the code of HEAD in line
with the stable branches should make that a bit easier.
Per discussion with Andres Freund and Nathan Bossart.
Discussion: https://postgr.es/m/Y979NR3U5VnWrTwB@paquier.xyz
Presently, restore_command uses a different code path than
archive_cleanup_command and recovery_end_command. These code paths
are similar and can be easily combined, as long as it is possible to
identify if a command should:
- Issue a FATAL on signal.
- Exit immediately on SIGTERM.
While on it, this removes src/common/archive.c and its associated
header. Since the introduction of c96de2c, BuildRestoreCommand() has
become a simple wrapper of replace_percent_placeholders() able to call
make_native_path(). This simplifies shell_restore.c as long as
RestoreArchivedFile() includes a call to make_native_path().
Author: Nathan Bossart
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
There are a number of places where a shell command is constructed with
percent-placeholders (like %x). It's cumbersome to have to open-code
this several times. This factors out this logic into a separate
function. This also allows us to ensure consistency for and document
some subtle behaviors, such as what to do with unrecognized
placeholders.
The unified handling is now that incorrect and unknown placeholders
are an error, where previously in most cases they were skipped or
ignored. This affects the following settings:
- archive_cleanup_command
- archive_command
- recovery_end_command
- restore_command
- ssl_passphrase_command
The following settings are part of this refactoring but already had
stricter error handling and should be unchanged in their behavior:
- basebackup_to_shell.command
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5238bbed-0b01-83a6-d4b2-7eb0562a054e%40enterprisedb.com
SCRAM_KEY_LEN was a variable used in the internal routines of SCRAM to
size a set of fixed-sized arrays used in the SHA and HMAC computations
during the SASL exchange or when building a SCRAM password. This had a
hard dependency on SHA-256, reducing the flexibility of SCRAM when it
comes to the addition of more hash methods. A second issue was that
SHA-256 is assumed as the cryptohash method to use all the time.
This commit renames SCRAM_KEY_LEN to a more generic SCRAM_KEY_MAX_LEN,
which is used as the size of the buffers used by the internal routines
of SCRAM. This is aimed at tracking centrally the maximum size
necessary for all the hash methods supported by SCRAM. A global
variable has the advantage of keeping the code in its simplest form,
reducing the need of more alloc/free logic for all the buffers used in
the hash calculations.
A second change is that the key length (SHA digest length) and hash
types are now tracked by the state data in the backend and the frontend,
the common portions being extended to handle these as arguments by the
internal routines of SCRAM. There are a few RFC proposals floating
around to extend the SCRAM protocol, including some to use stronger
cryptohash algorithms, so this lifts some of the existing restrictions
in the code.
The code in charge of parsing and building SCRAM secrets is extended to
rely on the key length and on the cryptohash type used for the exchange,
assuming currently that only SHA-256 is supported for the moment. Note
that the mock authentication simply enforces SHA-256.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Jonathan Katz
Discussion: https://postgr.es/m/Y5k3Qiweo/1g9CG6@paquier.xyz
Because we added StaticAssertStmt() first before StaticAssertDecl(),
some uses as well as the instructions in c.h are now a bit backwards
from the "native" way static assertions are meant to be used in C.
This updates the guidance and moves some static assertions to better
places.
Specifically, since the addition of StaticAssertDecl(), we can put
static assertions at the file level. This moves a number of static
assertions out of function bodies, where they might have been stuck
out of necessity, to perhaps better places at the file level or in
header files.
Also, when the static assertion appears in a position where a
declaration is allowed, then using StaticAssertDecl() is more native
than StaticAssertStmt().
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/941a04e7-dd6f-c0e4-8cdf-a33b3338cbda%40enterprisedb.com
This referred to the size of the buffers for k_ipad and k_opad in HMAC
computations. This is unused since e6bdfd9, where SCRAM has switched to
the cryptohash routines for its HMAC calculations rather than its own
maths.
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/Y5gGMjXhyp0oK0mH@paquier.xyz
This requires a bit of further infrastructure-extension to allow
trapping errors reported by numeric_in and pg_unicode_to_server,
but otherwise it's pretty straightforward.
In the case of jsonb_in, we are only capturing errors reported
during the initial "parse" phase. The value-construction phase
(JsonbValueToJsonb) can also throw errors if assorted implementation
limits are exceeded. We should improve that, but it seems like a
separable project.
Andrew Dunstan and Tom Lane
Discussion: https://postgr.es/m/3bac9841-fe07-713d-fa42-606c225567d6@dunslane.net
Formerly, semantic action functions for the JSON parser returned void,
so that there was no way for them to affect the parser's behavior.
That means in particular that they can't force an error exit except by
longjmp'ing. That won't do in the context of our project to make input
functions return errors softly. Hence, change them to return the same
JsonParseErrorType enum value as the parser itself uses. If an action
function returns anything besides JSON_SUCCESS, the parse is abandoned
and that error code is returned.
Action functions can thus easily return the same error conditions that
the parser already knows about. As an escape hatch for expansion, also
invent a code JSON_SEM_ACTION_FAILED that the core parser does not know
the exact meaning of. When returning this code, an action function
must use some out-of-band mechanism for reporting the error details.
This commit simply makes the API change and causes all the existing
action functions to return JSON_SUCCESS, so that there is no actual
change in behavior here. This is long enough and boring enough that
it seemed best to commit it separately from the changes that make
real use of the new mechanism.
In passing, remove a duplicate assignment of
transform_string_values_scalar.
Discussion: https://postgr.es/m/1436686.1670701118@sss.pgh.pa.us
This commit moves the code in charge of deparsing the method and detail
strings fed later to parse_compress_specification() to a common routine,
where the backward-compatible case of only an integer being found (N
= 0 => "none", N > 1 => gzip at level N) is handled.
Note that this has a side-effect for pg_basebackup, as we now attempt to
detect "server-" and "client-" before checking for the integer-only
pre-14 grammar, where values like server-N and client-N (without the
follow-up detail string) are now valid rather than failing because of an
unsupported method name. Past grammars are still handled the same way,
but these flavors are now authorized, and would now switch to consider N
= 0 as no compression and N > 1 as gzip with the compression level used
as N, with the caller still controlling if the compression method should
be done server-side, client-side or is unspecified. The documentation
of pg_basebackup is updated to reflect that.
This benefits other code paths that would like to rely on the same logic
as pg_basebackup and pg_receivewal with option values used for
compression specifications, one area discussed lately being pg_dump.
Author: Georgios Kokolatos, Michael Paquier
Discussion: https://postgr.es/m/O4mutIrCES8ZhlXJiMvzsivT7ztAMja2lkdL1LJx6O5f22I2W8PBIeLKz7mDLwxHoibcnRAYJXm1pH4tyUNC4a8eDzLn22a6Pb1S74Niexg=@pm.me
This routine is designed to write zeros to a file using vectored I/O,
for a size given by its caller, being useful when it comes to
initializing a file with a final size already known.
XLogFileInitInternal() in xlog.c is changed to use this new routine when
initializing WAL segments with zeros (wal_init_zero enabled). Note that
the aligned buffers used for the vectored I/O writes have a size of
XLOG_BLCKSZ, and not BLCKSZ anymore, as pg_pwrite_zeros() relies on
PGAlignedBlock while xlog.c originally used PGAlignedXLogBlock.
This routine will be used in a follow-up patch to do the pre-padding of
WAL segments for pg_receivewal and pg_basebackup when these are not
compressed.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Thomas Munro, Michael
Paquier
Discussion: https://www.postgresql.org/message-id/CALj2ACUq7nAb7%3DbJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA%40mail.gmail.com
This commit moves pg_pwritev_with_retry(), a convenience wrapper of
pg_writev() able to handle partial writes, to common/file_utils.c so
that the frontend code is able to use it. A first use-case targetted
for this routine is pg_basebackup and pg_receivewal, for the
zero-padding of a newly-initialized WAL segment. This is used currently
in the backend when the GUC wal_init_zero is enabled (default).
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Thomas Munro
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
This is a continuation of 78fdb1e, where this flag is set in the psql
callback handler used for SIGINT. This was previously a boolean but the
C standard recommends the use of sig_atomic_t. Note that this
influences PromptInterruptContext in string.h, where the same flag is
tracked.
Author: Hayato Kuroda
Discussion: https://postgr.es/m/TYAPR01MB58669A9EC96AA3078C2CD938F5549@TYAPR01MB5866.jpnprd01.prod.outlook.com
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Previously, these were declared in postgres_ext.h, but they are not
needed nearly so widely as the OID declarations, so that doesn't
necessarily make sense. Also, because postgres_ext.h is included
before most of c.h has been processed, the previous location creates
some problems for a pending patch.
Patch by me, reviewed by Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoYc8oevMqRokZQ4y_6aRn-7XQny1JBr5DyWR_jiFtONHw@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
Commit d8594d123 updated the list of non-spacing codepoints used
for calculating display width, but in doing so inadvertently removed
some, since the script used for that commit only considered combining
characters.
For complete coverage for zero-width characters, include codepoints in
the category Cf (Format). To reflect the wider purpose, also rename files
and update comments that referred specifically to combining characters.
Some of these ranges have been missing since v12, but due to lack of
field complaints it was determined not important enough to justify adding
special-case logic the backbranches.
Kyotaro Horiguchi
Report by Pavel Stehule
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRBE8yvpQ0FSkPCoe0Ny1jAAsAQ6j3qMgVwWvkqAoaaNmQ%40mail.gmail.com
This adds additional variants of palloc, pg_malloc, etc. that
encapsulate common usage patterns and provide more type safety.
Specifically, this adds palloc_object(), palloc_array(), and
repalloc_array(), which take the type name of the object to be
allocated as its first argument and cast the return as a pointer to
that type. There are also palloc0_object() and palloc0_array()
variants for initializing with zero, and pg_malloc_*() variants of all
of the above.
Inspired by the talloc library.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/bb755632-2a43-d523-36f8-a1e7a389a907@enterprisedb.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
Three variables in pqsignal.h (UnBlockSig, BlockSig and StartupBlockSig)
were not marked with PGDLLIMPORT, as they are declared in a way that
prevents mark_pgdllimport.pl to detect them. These variables are
redefined in a style more consistent with the other headers, allowing
the script to find and mark them.
PGDLLIMPORT was missing for __pg_log_level in logging.h, so add it
back. The marking got accidentally removed in 9a374b77, just after its
addition in 8ec5694.
While on it, add a comment in mark_pgdllimport.pl explaining what are
the arguments needed by the script (aka a list of header paths).
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20220506234924.6mxxotl3xl63db3l@alap3.anarazel.de
Enforce __pg_log_level message filtering centrally in logging.c,
instead of relying on the calling macros to do it. This is more
reliable (e.g. it works correctly for direct calls to pg_log_generic)
and it saves a percent or so of total code size because we get rid of
so many duplicate checks of __pg_log_level.
This does mean that argument expressions in a logging macro will be
evaluated even if we end up not printing anything. That seems of
little concern for INFO and higher levels as those messages are printed
by default, and most of our frontend programs don't even offer a way to
turn them off. I left the unlikely() checks in place for DEBUG
messages, though.
Discussion: https://postgr.es/m/3993549.1649449609@sss.pgh.pa.us
Compression option handling (level, algorithm or even workers) can be
used across several parts of the system and not only base backups.
Structures, objects and routines are renamed in consequence, to remove
the concept of base backups from this part of the code making this
change straight-forward.
pg_receivewal, that has gained support for LZ4 since babbbb5, will make
use of this infrastructure for its set of compression options, bringing
more consistency with pg_basebackup. This cleanup needs to be done
before releasing a beta of 15. pg_dump is a potential future target, as
well, and adding more compression options to it may happen in 16~.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
There are more compression parameters that can be specified than just
an integer compression level, so rename the new COMPRESSION_LEVEL
option to COMPRESSION_DETAIL before it gets released. Introduce a
flexible syntax for that option to allow arbitrary options to be
specified without needing to adjust the main replication grammar,
and common code to parse it that is shared between the client and
the server.
This commit doesn't actually add any new compression parameters,
so the only user-visible change is that you can now type something
like pg_basebackup --compress gzip:level=5 instead of writing just
pg_basebackup --compress gzip:5. However, it should make it easy to
add new options. If for example gzip starts offering fries, we can
support pg_basebackup --compress gzip:level=5,fries=true for the
benefit of users who want fries with that.
Along the way, this fixes a few things in pg_basebackup so that the
pg_basebackup can be used with a server-side compression algorithm
that pg_basebackup itself does not understand. For example,
pg_basebackup --compress server-lz4 could still succeed even if
only the server and not the client has LZ4 support, provided that
the other options to pg_basebackup don't require the client to
decompress the archive.
Patch by me. Reviewed by Justin Pryzby and Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmoYvpetyRAbbg1M8b3-iHsaN4nsgmWPjOENu5-doHuJ7fA@mail.gmail.com
The AF_UNIX macro was being used unprotected by HAVE_UNIX_SOCKETS,
apparently since 2008. So the redirection through IS_AF_UNIX() is
apparently no longer necessary. (More generally, all supported
platforms are now HAVE_UNIX_SOCKETS, but even if there were a new
platform in the future, it seems plausible that it would define the
AF_UNIX symbol even without kernel support.) So remove the
IS_AF_UNIX() macro and make the code a bit more consistent.
Discussion: https://www.postgresql.org/message-id/flat/f2d26815-9832-e333-d52d-72fbc0ade896%40enterprisedb.com
This is similar to b69aba7, except that this completes the work for
HMAC with a new routine called pg_hmac_error() that would provide more
context about the type of error that happened during a HMAC computation:
- The fallback HMAC implementation in hmac.c relies on cryptohashes, so
in some code paths it is necessary to return back the error generated by
cryptohashes.
- For the OpenSSL implementation (hmac_openssl.c), the logic is very
similar to cryptohash_openssl.c, where the error context comes from
OpenSSL if one of its internal routines failed, with different error
codes if something internal to hmac_openssl.c failed or was incorrect.
Any in-core code paths that use the centralized HMAC interface are
related to SCRAM, for errors that are unlikely going to happen, with
only SHA-256. It would be possible to see errors when computing some
HMACs with MD5 for example and OpenSSL FIPS enabled, and this commit
would help in reporting the correct errors but nothing in core uses
that. So, at the end, no backpatch to v14 is done, at least for now.
Errors in SCRAM related to the computation of the server key, stored
key, etc. need to pass down the potential error context string across
more layers of their respective call stacks for the frontend and the
backend, so each surrounding routine is adapted for this purpose.
Reviewed-by: Sergey Shinderuk
Discussion: https://postgr.es/m/Yd0N9tSAIIkFd+qi@paquier.xyz
The existing cryptohash facility was causing problems in some code paths
related to MD5 (frontend and backend) that relied on the fact that the
only type of error that could happen would be an OOM, as the MD5
implementation used in PostgreSQL ~13 (the in-core implementation is
used when compiling with or without OpenSSL in those older versions),
could fail only under this circumstance.
The new cryptohash facilities can fail for reasons other than OOMs, like
attempting MD5 when FIPS is enabled (upstream OpenSSL allows that up to
1.0.2, Fedora and Photon patch OpenSSL 1.1.1 to allow that), so this
would cause incorrect reports to show up.
This commit extends the cryptohash APIs so as callers of those routines
can fetch more context when an error happens, by using a new routine
called pg_cryptohash_error(). The error states are stored within each
implementation's internal context data, so as it is possible to extend
the logic depending on what's suited for an implementation. The default
implementation requires few error states, but OpenSSL could report
various issues depending on its internal state so more is needed in
cryptohash_openssl.c, and the code is shaped so as we are always able to
grab the necessary information.
The core code is changed to adapt to the new error routine, painting
more "const" across the call stack where the static errors are stored,
particularly in authentication code paths on variables that provide
log details. This way, any future changes would warn if attempting to
free these strings. The MD5 authentication code was also a bit blurry
about the handling of "logdetail" (LOG sent to the postmaster), so
improve the comments related that, while on it.
The origin of the problem is 87ae969, that introduced the centralized
cryptohash facility. Extra changes are done for pgcrypto in v14 for the
non-OpenSSL code path to cope with the improvements done by this
commit.
Reported-by: Michael Mühlbeyer
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/89B7F072-5BBE-4C92-903E-D83E865D9367@trivadis.com
Backpatch-through: 14
This reverts commits c2d1eea9e and 11b500072, as well as similar hacks
elsewhere, in favor of setting up the PGDLLIMPORT macro so that it can
just be used unconditionally. That can work because in frontend code,
we need no marking in either the defining or consuming files for a
variable exported from these libraries; and frontend code has no need
to access variables exported from the core backend, either.
While at it, write some actual documentation about the PGDLLIMPORT
and PGDLLEXPORT macros.
Patch by me, based on a suggestion from Robert Haas.
Discussion: https://postgr.es/m/1160385.1638165449@sss.pgh.pa.us
PGDLLIMPORT is only appropriate for variables declared in the backend,
not when the variable is coming from a library included in frontend code.
(This isn't a particularly nice fix, but for now, use the same method
employed elsewhere.)
Discussion: https://postgr.es/m/E1mrWUD-000235-Hq@gemulon.postgresql.org
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
