FreeSpaceMapVacuumRange has the same effect, is more efficient if many
pages are involved, and makes fewer assumptions about how it's used.
Notably, Claudio Freire pointed out that UpdateFreeSpaceMap could fail
if the specified freespace value isn't the maximum possible. This isn't
a problem for the single existing user, but the function represents an
attractive nuisance IMO, because it's named as though it were a
general-purpose update function and its limitations are undocumented.
In any case we don't need multiple ways to get the same result.
In passing, do some code review and cleanup in RelationAddExtraBlocks.
In particular, I see no excuse for it to omit the PageIsNew safety check
that's done in the mainline extension path in RelationGetBufferForTuple.
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
VACUUM updates leaf-level FSM entries immediately after cleaning the
corresponding heap blocks. fsmpage.c updates the intra-page search trees
on the leaf-level FSM pages when this happens, but it does not touch the
upper-level FSM pages, so that the released space might not actually be
findable by searchers. Previously, updating the upper-level pages happened
only at the conclusion of the VACUUM run, in a single FreeSpaceMapVacuum()
call. This is bad because the VACUUM might get canceled before ever
reaching that point, so that from the point of view of searchers no space
has been freed at all, leading to table bloat.
We can improve matters by updating the upper pages immediately after each
cycle of index-cleaning and heap-cleaning, processing just the FSM pages
corresponding to the range of heap blocks we have now fully cleaned.
This adds a small amount of extra work, since the FSM pages leading down
to each range boundary will be touched twice, but it's pretty negligible
compared to everything else going on in a large VACUUM.
If there are no indexes, VACUUM doesn't work in cycles but just cleans
each heap page on first visit. In that case we just arbitrarily update
upper FSM pages after each 8GB of heap. That maintains the goal of not
letting all this work slide until the very end, and it doesn't seem worth
expending extra complexity on a case that so seldom occurs in practice.
In either case, the FSM is fully up to date before any attempt is made
to truncate the relation, so that the most likely scenario for VACUUM
cancellation no longer results in out-of-date upper FSM pages. When
we do successfully truncate, adjusting the FSM to reflect that is now
fully handled within FreeSpaceMapTruncateRel.
Claudio Freire, reviewed by Masahiko Sawada and Jing Wang, some additional
tweaks by me
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
Add explicit cast from scalar jsonb to all numeric and bool types. It would be
better to have cast from scalar jsonb to text too but there is already a cast
from jsonb to text as just text representation of json. There is no way to have
two different casts for the same type's pair.
Bump catalog version
Author: Anastasia Lubennikova with editorization by Nikita Glukhov and me
Review by: Aleksander Alekseev, Nikita Glukhov, Darafei Praliaskouski
Discussion: https://www.postgresql.org/message-id/flat/0154d35a-24ae-f063-5273-9ffcdf1c7f2e@postgrespro.ru
Previously, committing or aborting inside a cursor loop was prohibited
because that would close and remove the cursor. To allow that,
automatically convert such cursors to holdable cursors so they survive
commits or rollbacks. Portals now have a new state "auto-held", which
means they have been converted automatically from pinned. An auto-held
portal is kept on transaction commit or rollback, but is still removed
when returning to the main loop on error.
This supports all languages that have cursor loop constructs: PL/pgSQL,
PL/Python, PL/Perl.
Reviewed-by: Ildus Kurbangaliev <i.kurbangaliev@postgrespro.ru>
This just shows a few details about JITing, e.g. how many functions
have been JITed, and how long that took. To avoid noise in regression
tests with functions sometimes being JITed in --with-llvm builds,
disable display when COSTS OFF is specified.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This provides infrastructure to allow JITed code to inline code
implemented in C. This e.g. can be postgres internal functions or
extension code.
This already speeds up long running queries, by allowing the LLVM
optimizer to optimize across function boundaries. The optimization
potential currently doesn't reach its full potential because LLVM
cannot optimize the FunctionCallInfoData argument fully away, because
it's allocated on the heap rather than the stack. Fixing that is
beyond what's realistic for v11.
To be able to do that, use CLANG to convert C code to LLVM bitcode,
and have LLVM build a summary for it. That bitcode can then be used to
to inline functions at runtime. For that the bitcode needs to be
installed. Postgres bitcode goes into $pkglibdir/bitcode/postgres,
extensions go into equivalent directories. PGXS has been modified so
that happens automatically if postgres has been compiled with LLVM
support.
Currently this isn't the fastest inline implementation, modules are
reloaded from disk during inlining. That's to work around an apparent
LLVM bug, triggering an apparently spurious error in LLVM assertion
enabled builds. Once that is resolved we can remove the superfluous
read from disk.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
When compiling with clang glibc's definition of isinf() ends up
leading to and external libc function call. That's because there was a
bug in the builtin in an old gcc version, and clang claims
compatibility with an older version. That causes clang to be
measurably slower for floating point heavy workloads than gcc.
To fix simply redirect isinf when using clang and clang confirms it
has __builtin_isinf().
So far, a nested CALL or DO in PL/pgSQL would not establish a context
where transaction control statements were allowed. This fixes that by
handling CALL and DO specially in PL/pgSQL, passing the atomic/nonatomic
execution context through and doing the required management around
transaction boundaries.
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Store GID of 2PC in commit/abort WAL records when wal_level = logical.
This allows logical decoding to send the SAME gid to subscribers
across restarts of logical replication.
Track relica origin replay progress for 2PC.
(Edited from patch 0003 in the logical decoding 2PC series.)
Authors: Nikhil Sontakke, Stas Kelvich
Reviewed-by: Simon Riggs, Andres Freund
Instead using memset to set tts_isnull, call the new
slot_getmissingattrs().
Also fix a bug (= instead of >=) in the code generation. Normally = is
correct, but when repeatedly deforming fields not in a
tuple (e.g. deform up to natts + 1 and then natts + 2) >= is needed.
Discussion: https://postgr.es/m/20180328010053.i2qvsuuusst4lgmc@alap3.anarazel.de
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
Originally, we treated memory context names as potentially variable in
all cases, and therefore always copied them into the context header.
Commit 9fa6f00b1 rethought this a little bit and invented a distinction
between fixed and variable names, skipping the copy step for the former.
But we can make things both simpler and more useful by instead allowing
there to be two parts to a context's identification, a fixed "name" and
an optional, variable "ident". The name supplied in the context create
call is now required to be a compile-time-constant string in all cases,
as it is never copied but just pointed to. The "ident" string, if
wanted, is supplied later. This is needed because typically we want
the ident to be stored inside the context so that it's cleaned up
automatically on context deletion; that means it has to be copied into
the context before we can set the pointer.
The cost of this approach is basically just an additional pointer field
in struct MemoryContextData, which isn't much overhead, and is bought
back entirely in the AllocSet case by not needing a headerSize field
anymore, since we no longer have to cope with variable header length.
In addition, we can simplify the internal interfaces for memory context
creation still further, saving a few cycles there. And it's no longer
true that a custom identifier disqualifies a context from participating
in aset.c's freelist scheme, so possibly there's some win on that end.
All the places that were using non-compile-time-constant context names
are adjusted to put the variable info into the "ident" instead. This
allows more effective identification of those contexts in many cases;
for example, subsidary contexts of relcache entries are now identified
by both type (e.g. "index info") and relname, where before you got only
one or the other. Contexts associated with PL function cache entries
are now identified more fully and uniformly, too.
I also arranged for plancache contexts to use the query source string
as their identifier. This is basically free for CachedPlanSources, as
they contained a copy of that string already. We pay an extra pstrdup
to do it for CachedPlans. That could perhaps be avoided, but it would
make things more fragile (since the CachedPlanSource is sometimes
destroyed first). I suspect future improvements in error reporting will
require CachedPlans to have a copy of that string anyway, so it's not
clear that it's worth moving mountains to avoid it now.
This also changes the APIs for context statistics routines so that the
context-specific routines no longer assume that output goes straight
to stderr, nor do they know all details of the output format. This
is useful immediately to reduce code duplication, and it also allows
for external code to do something with stats output that's different
from printing to stderr.
The reason for pushing this now rather than waiting for v12 is that
it rethinks some of the API changes made by commit 9fa6f00b1. Seems
better for extension authors to endure just one round of API changes
not two.
Discussion: https://postgr.es/m/CAB=Je-FdtmFZ9y9REHD7VsSrnCkiBhsA4mdsLKSPauwXtQBeNA@mail.gmail.com
If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.
Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.
Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.
Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup
Performing JIT compilation for deforming gains performance benefits
over unJITed deforming from compile-time knowledge of the tuple
descriptor. Fixed column widths, NOT NULLness, etc can be taken
advantage of.
Right now the JITed deforming is only used when deforming tuples as
part of expression evaluation (and obviously only if the descriptor is
known). It's likely to be beneficial in other cases, too.
By default tuple deforming is JITed whenever an expression is JIT
compiled. There's a separate boolean GUC controlling it, but that's
expected to be primarily useful for development and benchmarking.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Commit eb7ed3f30634 enabled unique constraints on partitioned tables,
but one thing that was not working properly is INSERT/ON CONFLICT.
This commit introduces a new node keeps state related to the ON CONFLICT
clause per partition, and fills it when that partition is about to be
used for tuple routing.
Author: Amit Langote, Álvaro Herrera
Reviewed-by: Etsuro Fujita, Pavan Deolasee
Discussion: https://postgr.es/m/20180228004602.cwdyralmg5ejdqkq@alvherre.pgsql
Revert the PL/Perl-specific change in
9a95a77d9d5d3003d2d67121f2731b6e5fc37336. We must not prevent Perl from
using stdbool.h when it has been built to do so, even if it uses an
incompatible size. Otherwise, we would be imposing our bool on Perl,
which will lead to crashes because of the size mismatch.
Instead, we undef bool after including the Perl headers, as we did
previously, but now only if we are not using stdbool.h ourselves.
Record that choice in c.h as USE_STDBOOL. This will also make it easier
to apply that coding pattern elsewhere if necessary.
Previously, FOR EACH ROW triggers were not allowed in partitioned
tables. Now we allow AFTER triggers on them, and on trigger creation we
cascade to create an identical trigger in each partition. We also clone
the triggers to each partition that is created or attached later.
This means that deferred unique keys are allowed on partitioned tables,
too.
Author: Álvaro Herrera
Reviewed-by: Peter Eisentraut, Simon Riggs, Amit Langote, Robert Haas,
Thomas Munro
Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
The LLVM JIT provider uses clang to synchronize types between normal C
code and runtime generated code. Clang represents stdbool.h style
booleans in return values & parameters differently from booleans
stored in variables.
Thus the expression compilation code from 2a0faed9d needs to be
adapted to 9a95a77d9. Instead of hardcoding i8 as the type for
booleans (which already was wrong on some edge case platforms!), use
postgres' notion of a boolean as used for storage and for parameters.
Per buildfarm animal xenodermus.
Author: Andres Freund
Using the standard bool type provided by C allows some recent compilers
and debuggers to give better diagnostics. Also, some extension code and
third-party headers are increasingly pulling in stdbool.h, so it's
probably saner if everyone uses the same definition.
But PostgreSQL code is not prepared to handle bool of a size other than
1, so we keep our own old definition if we encounter a stdbool.h with a
bool of a different size. (Among current build farm members, this only
applies to old macOS versions on PowerPC.)
To check that the used bool is of the right size, add a static
assertions about size of GinTernaryValue vs bool. This is currently the
only place that assumes that bool and char are of the same size.
Discussion: https://www.postgresql.org/message-id/flat/3a0fe7e1-5ed1-414b-9230-53bbc0ed1f49@2ndquadrant.com
In addition to the interpretation of expressions (which back
evaluation of WHERE clauses, target list projection, aggregates
transition values etc) support compiling expressions to native code,
using the infrastructure added in earlier commits.
To avoid duplicating a lot of code, only support emitting code for
cases that are likely to be performance critical. For expression steps
that aren't deemed that, use the existing interpreter.
The generated code isn't great - some architectural changes are
required to address that. But this already yields a significant
speedup for some analytics queries, particularly with WHERE clauses
filtering a lot, or computing multiple aggregates.
Author: Andres Freund
Tested-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Disable JITing for VALUES() nodes.
VALUES() nodes are only ever executed once. This is primarily helpful
for debugging, when forcing JITing even for cheap queries.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
For any interesting JIT target, fields inside structs need to be
accessed. b96d550e contains infrastructure for syncing the definition
of types between postgres C code and runtime code generation with
LLVM. But that doesn't sync the number or names of fields inside
structs, just the types (including padding etc).
One option would be to hardcode the offset numbers in the JIT code,
but that'd be hard to keep in sync. Instead add macros indicating the
field offset to the fields that need to be accessed. Not pretty, but
manageable.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This adds simple cost based plan time decision about whether JIT
should be performed. jit_above_cost, jit_optimize_above_cost are
compared with the total cost of a plan, and if the cost is above them
JIT is performed / optimization is performed respectively.
For that PlannedStmt and EState have a jitFlags (es_jit_flags) field
that stores information about what JIT operations should be performed.
EState now also has a new es_jit field, which can store a
JitContext. When there are no errors the context is released in
standard_ExecutorEnd().
It is likely that the default values for jit_[optimize_]above_cost
will need to be adapted further, but in my test these values seem to
work reasonably.
Author: Andres Freund, with feedback by Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This commit introduces the ability to actually generate code using
LLVM. In particular, this adds:
- Ability to emit code both in heavily optimized and largely
unoptimized fashion
- Batching facility to allow functions to be defined in small
increments, but optimized and emitted in executable form in larger
batches (for performance and memory efficiency)
- Type and function declaration synchronization between runtime
generated code and normal postgres code. This is critical to be able
to access struct fields etc.
- Developer oriented jit_dump_bitcode GUC, for inspecting / debugging
the generated code.
- per JitContext statistics of number of functions, time spent
generating code, optimizing, and emitting it. This will later be
employed for EXPLAIN support.
This commit doesn't yet contain any code actually generating
functions. That'll follow in later commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with contributions by Pierre Ducroquet
Testing-By: Thomas Munro, Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
If the partition keys of input relation are part of the GROUP BY
clause, all the rows belonging to a given group come from a single
partition. This allows aggregation/grouping over a partitioned
relation to be broken down * into aggregation/grouping on each
partition. This should be no worse, and often better, than the normal
approach.
If the GROUP BY clause does not contain all the partition keys, we can
still perform partial aggregation for each partition and then finalize
aggregation after appending the partial results. This is less certain
to be a win, but it's still useful.
Jeevan Chalke, Ashutosh Bapat, Robert Haas. The larger patch series
of which this patch is a part was also reviewed and tested by Antonin
Houska, Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin
Knizhnik, Pascal Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
This commit introduces:
1) JIT provider abstraction, which allows JIT functionality to be
implemented in separate shared libraries. That's desirable because
it allows to install JIT support as a separate package, and because
it allows experimentation with different forms of JITing.
2) JITContexts which can be, using functions introduced in follow up
commits, used to emit JITed functions, and have them be cleaned up
on error.
3) The outline of a LLVM JIT provider, which will be fleshed out in
subsequent commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with architectural input from Jeff Davis
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
I noticed while fooling with John Naylor's bootstrap-data patch that we had
one high-numbered manually assigned OID, 8888, which evidently came from a
submission that the committer didn't bother to bring into line with usual
OID allocation practices before committing. That's a bad idea, because it
creates a hazard for other patches that may be temporarily using high OID
numbers. Change it to something more in line with what we usually do.
This evidently dates to commit abb173392. It's too late to change it
in released branches, but we can fix it in HEAD.
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2bd3d4629bd73ae3548e671c57d785f0, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
LLVM will be used for *optional* Just-in-time compilation
support. This commit just adds the configure infrastructure that
detects LLVM.
No documentation has been added for the --with-llvm flag, that'll be
added after the actual supporting code has been added.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Since e3bdb2d92600ed45bd46aaf48309a436a9628218, libpq failed to build on
some platforms because they did not have SSL_clear_options(). Although
mainline OpenSSL introduced SSL_clear_options() after
SSL_OP_NO_COMPRESSION, so the code should have built fine, at least an
old NetBSD version (build farm "coypu" NetBSD 5.1 gcc 4.1.3 PR-20080704
powerpc) has SSL_OP_NO_COMPRESSION but no SSL_clear_options().
So add a configure check for SSL_clear_options(). If we don't find it,
skip the call. That means on such a platform one cannot *enable* SSL
compression if the built-in default is off, but that seems an unlikely
combination anyway and not very interesting in practice.
Since commit 4f15e5d09de276fb77326be5567dd9796008ca2e made grouped_rel
set reltarget, a variety of other functions can just get it from
grouped_rel instead of having to pass it around explicitly. Simplify
accordingly.
Patch by me, reviewed by Ashutosh Bapat.
Discussion: http://postgr.es/m/CA+TgmoZ+ZJTVad-=vEq393N99KTooxv9k7M+z73qnTAqkb49BQ@mail.gmail.com
The original coding of the SP-GiST scan traversalValue feature (commit
ccd6eb49a) arranged for traversal values to be stored in the query's main
executor context. That's fine if there's only one index scan per query,
but if there are many, we have a memory leak as successive scans create
new traversal values. Fix it by creating a separate memory context for
traversal values, which we can reset during spgrescan(). Back-patch
to 9.6 where this code was introduced.
In principle, adding the traversalCxt field to SpGistScanOpaqueData
creates an ABI break in the back branches. But I (tgl) have little
sympathy for extensions including spgist_private.h, so I'm not very
worried about that. Alternatively we could stick the new field at the
end of the struct in back branches, but that has its own downsides.
Anton Dignös, reviewed by Alexander Kuzmenkov
Discussion: https://postgr.es/m/CALNdv1jb6y2Te-m8xHLxLX12RsBmZJ1f4hESX7J0HjgyOhA9eA@mail.gmail.com
refresh_by_match_merge() has some issues in the way it builds a SQL
query to construct the "diff" table:
1. It doesn't require the selected unique index(es) to be indimmediate.
2. It doesn't pay attention to the particular equality semantics enforced
by a given index, but just assumes that they must be those of the column
datatype's default btree opclass.
3. It doesn't check that the indexes are btrees.
4. It's insufficiently careful to ensure that the parser will pick the
intended operator when parsing the query. (This would have been a
security bug before CVE-2018-1058.)
5. It's not careful about indexes on system columns.
The way to fix#4 is to make use of the existing code in ri_triggers.c
for generating an arbitrary binary operator clause. I chose to move
that to ruleutils.c, since that seems a more reasonable place to be
exporting such functionality from than ri_triggers.c.
While #1, #3, and #5 are just latent given existing feature restrictions,
and #2 doesn't arise in the core system for lack of alternate opclasses
with different equality behaviors, #4 seems like an issue worth
back-patching. That's the bulk of the change anyway, so just back-patch
the whole thing to 9.4 where this code was introduced.
Discussion: https://postgr.es/m/13836.1521413227@sss.pgh.pa.us
These values can be obtained from the ModifyTable node which is already
a part of both the ModifyTableState and ExecInsert.
Author: Álvaro Herrera, Amit Langote
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/20180316151303.rml2p5wffn3o6qy6@alvherre.pgsql
We make some changes to ModifyTableState and the EState it uses whenever
we route tuples to partitions; but we weren't restoring properly in all
cases, possibly causing crashes when partitions with different tuple
descriptors are targeted by tuples inserted in the same command.
Refactor some code, creating ExecPrepareTupleRouting, to encapsulate the
needed state changing logic, and have it invoked one level above its
current place (ie. put it in ExecModifyTable instead of ExecInsert);
this makes it all more readable.
Add a test case to exercise this.
We don't support having views as partitions; and since only views can
have INSTEAD OF triggers, there is no point in testing for INSTEAD OF
when processing insertions into a partitioned table. Remove code that
appears to support this (but which is actually never relevant.)
In passing, fix location of some very confusing comments in
ModifyTableState.
Reported-by: Amit Langote
Author: Etsuro Fujita, Amit Langote
Discussion: https://postgr/es/m/0473bf5c-57b1-f1f7-3d58-455c2230bc5f@lab.ntt.co.jp
"UPDATE/DELETE WHERE CURRENT OF cursor_name" failed, with an error message
like "cannot extract system attribute from virtual tuple", if the cursor
was using a index-only scan for the target table. Fix it by digging the
current TID out of the indexscan state.
It seems likely that the same failure could occur for CustomScan plans
and perhaps some FDW plan types, so that leaving this to be treated as an
internal error with an obscure message isn't as good an idea as it first
seemed. Hence, add a bit of heaptuple.c infrastructure to let us deliver
a more on-topic message. I chose to make the message match what you get
for the case where execCurrentOf can't identify the target scan node at
all, "cursor "foo" is not a simply updatable scan of table "bar"".
Perhaps it should be different, but we can always adjust that later.
In the future, it might be nice to provide hooks that would let custom
scan providers and/or FDWs deal with this in other ways; but that's
not a suitable topic for a back-patchable bug fix.
It's been like this all along, so back-patch to all supported branches.
Yugo Nagata and Tom Lane
Discussion: https://postgr.es/m/20180201013349.937dfc5f.nagata@sraoss.co.jp
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This allows to deduplicate some existing code, but mainly avoids some
duplication in upcoming commits.
In passing, fix variable names indicating wrong unit (seconds instead
of ms).
Author: Andres Freund
Discussion: https://postgr.es/m/20180314002740.cah3mdsonz5mxney@alap3.anarazel.de
'long' is not useful type across platforms, as it's 32bit on 32 bit
platforms, and even on some 64bit platforms (e.g. windows) it's still
only 32bits wide.
As ExplainPropertyInteger should never be performance critical, change
it to accept a 64bit argument and remove ExplainPropertyLong.
Author: Andres Freund
Discussion: https://postgr.es/m/20180314164832.n56wt7zcbpzi6zxe@alap3.anarazel.de
Instead of embedding the savepoint name in a list and then requiring
complex code to unpack it, just add another struct field to store it
directly.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
