Some of the TAP tests have been historically setting the environment
variable PGDATABASE to 'postgres', which is not needed because
PostgreSQL::Test::Cluster already sets it when initialized. This commit
removes these explicit setups.
Note that the dependency of cluster -a with PGDATABASE (from
1caef31d9e55) is still documented.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXLAz5dW3ZP+Fec8g6jQMMmDyCVT+qdbye2h7QJJmhsdw@mail.gmail.com
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
The --help output stated that schemas were specified using PATTERN
when they in fact aren't pattern matched but are required to be
exact matches. This changes to SCHEMA to make that clear.
Backpatch through v16 where this was introduced.
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qp9mXPQd5D6s6CJxvmignsbTqGZwDDB6VYJOn1A8WG38w@mail.gmail.com
Backpatch-through: 16
When specifying multiple schemas to exclude with -N parameters, none
of the schemas are actually excluded (a single -N worked as expected).
This fixes the catalog query to handle multiple exclusions and adds a
test for this case.
Backpatch to v16 where this was introduced.
Author: Nathan Bossart <nathandbossart@gmail.com>
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Reported-by: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qp9mXPQd5D6s6CJxvmignsbTqGZwDDB6VYJOn1A8WG38w@mail.gmail.com
Backpatch-through: 16
ae78cae3b added the --buffer-usage-limit to vacuumdb to allow it to
include the BUFFER_USAGE_LIMIT option in the VACUUM command.
Unfortunately, that commit forgot to adjust the code so the option was
added to the ANALYZE command when the -Z command line argument was
specified.
There were no issues with the -z command as that option just adds
ANALYZE to the VACUUM command.
In passing adjust the code to escape the --buffer-usage-limit option
before passing it to the server. It seems nothing beyond a confusing
error message could become this lack of escaping as VACUUM cannot be
specified in a multi-command string.
Reported-by: Ryoga Yoshida
Author: Ryoga Yoshida, David Rowley
Discussion: https://postgr.es/m/08930c0b541700a5264e5fbf3a685f5a%40oss.nttdata.com
Backpatch-through: 16, where ae78cae3b was introduced.
Commits 83dec5a712 and ff402ae11b taught vacuumdb to reuse
passwords instead of prompting repeatedly. However, the docs still
warn about repeated prompts, and this improvement was not applied
to clusterdb and reindexdb. This commit allows clusterdb and
reindexdb to reuse passwords just like vacuumdb does, and it
expunges the aforementioned warnings from the docs.
Reviewed-by: Gurjeet Singh, Zhang Mingli
Discussion: https://postgr.es/m/20230628045741.GA1813397%40nathanxps13
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
Unlike the other implementations of getopt_long() I could find, the
in-tree implementation does not reorder non-options to the end of
argv. Instead, it returns -1 as soon as the first non-option is
found, even if there are other options listed afterwards. By
moving non-options to the end of argv, getopt_long() can parse all
specified options and return -1 when only non-options remain.
This quirk is periodically missed by hackers (e.g., 869aa40a27,
ffd398021c, and d9ddc50baf). This commit introduces the
aforementioned non-option reordering behavior to the in-tree
getopt_long() implementation.
Special thanks to Noah Misch for his help verifying behavior on
AIX.
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20230609232257.GA121461%40nathanxps13
Run pgindent and pgperltidy. It seems we're still some ways
away from all committers doing this automatically. Now that
we have a buildfarm animal that will whine about poorly-indented
code, we'll try to keep the tree more tidy.
Discussion: https://postgr.es/m/3156045.1687208823@sss.pgh.pa.us
For CREATE DATABASE, make LOCALE parameter apply regardless of the
provider used. Also affects initdb and createdb --locale arguments.
Previously, LOCALE (and --locale) only affected the database default
collation when using the libc provider.
Discussion: https://postgr.es/m/1a63084d-221e-4075-619e-6b3e590f673e@enterprisedb.com
Reviewed-by: Peter Eisentraut
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
2dcd1578c4 left the --role option undocumented, which is
inconsistent with other deprecated options such as pg_dump's
--blobs and --no-blobs. This change adds --role back to
createuser's documentation and usage output and marks it as
deprecated.
Suggested-by: Peter Eisentraut
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0e85c9e7-4804-1cdb-5a4a-c72c328f9ad8%40enterprisedb.com
This change renames --admin to --with-admin, --role to --member-of,
and --member to --with-member. Many people found the previous
names to be confusing. The --admin and --member options are new in
v16, but --role has been there for a while, so that one has been
kept (but left undocumented) for backward compatibility.
Suggested-by: Peter Eisentraut
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/ZFvVZvQDliIWmOwg%40momjian.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
This addresses various deficiencies in the documentation for VACUUM and
ANALYZE's BUFFER_USEAGE_LIMIT docs.
Here we declare "size" in the syntax synopsis for VACUUM and ANALYZE's
BUFFER_USAGE_LIMIT option and then define exactly what values can be
specified for it in the section for that below.
Also, fix the incorrect ordering of vacuumdb options both in the documents
and in vacuumdb's --help output. These should be in alphabetical order.
In passing also add the minimum/maximum range for the BUFFER_USAGE_LIMIT
option. These will also serve as example values that can be modified and
used.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/16845cb1-b228-e157-f293-5892bced9253@enterprisedb.com
1cbbee033 added BUFFER_USAGE_LIMIT to the VACUUM and ANALYZE commands, so
here we permit that option to be specified in vacuumdb.
In passing, adjust the documents for vacuum_buffer_usage_limit and the
BUFFER_USAGE_LIMIT VACUUM option to mention "kB" rather than "KB". Do the
same for the ERROR message in ExecVacuum() and
check_vacuum_buffer_usage_limit(). Without that we might tell a user that
the valid minimum value is 128 KB only to reject that because we accept
only "kB" and not "KB".
Also, add a small reminder comment in vacuum.h to try to trigger the
memory of anyone adding new fields to VacuumParams that they might want to
consider if vacuumdb needs to grow a new option too.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/ZAzTg3iEnubscvbf@telsasoft.com
Previously, the default encoding was derived from the locale when
using libc; while the default was always UTF-8 when using ICU. That
would throw an error when the locale was not compatible with UTF-8.
This commit causes initdb to derive the default encoding from the
locale for both providers. If --no-locale is specified (or if the
locale is C or POSIX), the default encoding will be UTF-8 for ICU
(because ICU does not support SQL_ASCII) and SQL_ASCII for libc.
Per buildfarm failure on system "hoverfly" related to commit
27b62377b4.
Discussion: https://postgr.es/m/d191d5841347301a8f1238f609471ddd957fc47e.camel%40j-davis.com
One file per line seems best. We already did this in some cases.
This adopts the same format everywhere (except in some cases where the
list reasonably fits on one line).
Add description of which one is the default between two complementary
options of --bypassrls and --replication in the help text and docs. In
correspondence let the command always include the tokens corresponding
to every options of that kind in the SQL command sent to server. Tests
are updated accordingly.
Also fix the checks of some trivalue vars which were using literal zero
for checking default value instead of the enum label TRI_DEFAULT. While
not a bug, since TRI_DEFAULT is defined as zero, fixing improves read-
ability improved readability (and avoid bugs if the enum is changed).
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220810.151243.1073197628358749087.horikyota.ntt@gmail.com
Disabling this option is useful to run VACUUM (with or without FULL) on
only the toast table of a relation, bypassing the main relation. This
option is enabled by default.
Running directly VACUUM on a toast table was already possible without
this feature, by using the non-deterministic name of a toast relation
(as of pg_toast.pg_toast_N, where N would be the OID of the parent
relation) in the VACUUM command, and it required a scan of pg_class to
know the name of the toast table. So this feature is basically a
shortcut to be able to run VACUUM or VACUUM FULL on a toast relation,
using only the name of the parent relation.
A new switch called --no-process-main is added to vacuumdb, to work as
an equivalent of PROCESS_MAIN.
Regression tests are added to cover VACUUM and VACUUM FULL, looking at
pg_stat_all_tables.vacuum_count to see how many vacuums have run on
each table, main or toast.
Author: Nathan Bossart
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/20221230000028.GA435655@nathanxps13
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Commit 6566133c5f52771198aca07ed18f84519fac1be7 broke the case where
the role passed to DROP OWNED BY owns a database.
Report by Rushabh Lathia, who also provided a patch, but this patch
takes a slightly different approach to fixing the problem.
Discussion: http://postgr.es/m/CAGPqQf2vO+nbo=3yAdZ8v26Rbug7bY4YjPaPLZx=L1NZ9-CC3w@mail.gmail.com
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
If the createdb tests run under the C locale, the database cluster
will be initialized with encoding SQL_ASCII. With the checks added in
c7db01e325a530ec38ec7ba57cd3ed32e123e33c, this will cause several
ICU-related tests to fail because SQL_ASCII is not supported by ICU.
To work around that, use initdb option -E UTF8 for those tests to get
past that check.
Locale options can be specified for initdb, createdb, and CREATE
DATABASE. In initdb, it has always been possible to specify --locale
and then some --lc-* option to override a category. CREATE DATABASE
and createdb didn't allow that, requiring either the all-categories
option or only per-category options. In
f2553d43060edb210b36c63187d52a632448e1d2, this was changed in CREATE
DATABASE (perhaps by accident?) to be more like the initdb behavior,
but createdb still had the old behavior.
Now we change createdb to match the behavior of CREATE DATABASE and
initdb, and also update the documentation of CREATE DATABASE to match
the new behavior, which was not done in the above commit.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/7c99c132dc9c0ac630e0127f032ac480@postgrespro.ru
