This reverts commit 1fd981f05369, based on concerns that the logging
improvements do not justify the protocol breakage of dropping an unnamed
portal once its execution has completed.
It seems unlikely that one would try to send an execute or describe
message after the portal has been used, but if they do such
post-completion messages would not be able to process as the previous
versions. Let's revert this change for now so as we keep compatibility
and consider a different solution.
The tests added by 76bba033128a track the pre-1fd981f05369 behavior, and
are still valid.
Discussion: https://postgr.es/m/CA+TgmoYFJyJNQw3RT7veO3M2BWRE9Aw4hprC5rOcawHZti-f8g@mail.gmail.com
Since this is a test module, leaking a couple of LWLock tranches is
fine, but we want to discourage that pattern in third-party code.
This commit teaches the module to create only one tranche and to
store its ID in shared memory for use by other backends.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/dd36d384-55df-4fc2-825c-5bc56c950fa9%40gmail.com
The async notification queue contains the XID of the sender, and when
processing notifications we call TransactionIdDidCommit() on the
XID. But we had no safeguards to prevent the CLOG segments containing
those XIDs from being truncated away. As a result, if a backend didn't
for some reason process its notifications for a long time, or when a
new backend issued LISTEN, you could get an error like:
test=# listen c21;
ERROR: 58P01: could not access status of transaction 14279685
DETAIL: Could not open file "pg_xact/000D": No such file or directory.
LOCATION: SlruReportIOError, slru.c:1087
To fix, make VACUUM "freeze" the XIDs in the async notification queue
before truncating the CLOG. Old XIDs are replaced with
FrozenTransactionId or InvalidTransactionId.
Note: This commit is not a full fix. A race condition remains, where a
backend is executing asyncQueueReadAllNotifications() and has just
made a local copy of an async SLRU page which contains old XIDs, while
vacuum concurrently truncates the CLOG covering those XIDs. When the
backend then calls TransactionIdDidCommit() on those XIDs from the
local copy, you still get the error. The next commit will fix that
remaining race condition.
This was first reported by Sergey Zhuravlev in 2021, with many other
people hitting the same issue later. Thanks to:
- Alexandra Wang, Daniil Davydov, Andrei Varashen and Jacques Combrink
for investigating and providing reproducable test cases,
- Matheus Alcantara and Arseniy Mukhin for review and earlier proposed
patches to fix this,
- Álvaro Herrera and Masahiko Sawada for reviews,
- Yura Sokolov aka funny-falcon for the idea of marking transactions
as committed in the notification queue, and
- Joel Jacobson for the final patch version. I hope I didn't forget
anyone.
Backpatch to all supported versions. I believe the bug goes back all
the way to commit d1e027221d, which introduced the SLRU-based async
notification queue.
Discussion: https://www.postgresql.org/message-id/16961-25f29f95b3604a8a@postgresql.org
Discussion: https://www.postgresql.org/message-id/18804-bccbbde5e77a68c2@postgresql.org
Discussion: https://www.postgresql.org/message-id/CAK98qZ3wZLE-RZJN_Y%2BTFjiTRPPFPBwNBpBi5K5CU8hUHkzDpw@mail.gmail.com
Backpatch-through: 14
The maximum limits for point name, library name, function name and
private area size were not kept track of in the tests. The new function
introduced in 16a2f706951e gives a way to trigger them. This is not
critical but cheap to cover.
While on it, this commit cleans up some of the tests introduced by
16a2f706951e for NULL inputs by using more consistent argument values.
The coverage does not change, but it makes the whole less confusing with
argument values that are correct based their position in the SQL
function called.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/aRE7zhu6wOA29gFf@paquier.xyz
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
While there are many tests related to relation rewrites, nothing existed
to check how the cumulative statistics behave in such cases for
relations.
A different patch is under discussion to move the relation statistics to
be tracked on a per-relfilenode basis, so as these could be rebuilt
during crash recovery. This commit gives us a way to check (and perhaps
change) the existing behaviors for several rewrite scenarios, mixing
transactions, sub-transactions, two-phase commit and VACUUM.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aQ3X20hbqoThQXgp@ip-10-97-1-34.eu-west-3.compute.internal
This new function is able to take in input more data than the existing
injection_point_attach():
- A library name.
- A function name.
- Some private data.
This gives more flexibility for tests so as these would not need to
reinvent a wrapper for InjectionPointAttach() when attaching a callback
from a library other than "injection_points". injection_point_detach()
can be used with both versions of injection_point_attach().
Author: Rahila Syed <rahilasyed.90@gmail.com>
Reviewed-by: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAH2L28sOG2b_TKkZU51dy+pWJtny1mqDmeFiFoUASGa0X0iiKQ@mail.gmail.com
This warning was disabled in meson.build (warning 4273). If you
enable it, it looks like this:
../src/backend/utils/misc/ps_status.c(27): warning C4273: '__p__environ': inconsistent dll linkage
C:\Program Files (x86)\Windows Kits\10\include\10.0.22621.0\ucrt\stdlib.h(1158): note: see previous definition of '__p__environ'
The declaration in ps_status.c was:
#if !defined(WIN32) || defined(_MSC_VER)
extern char **environ;
#endif
The declaration in the OS header file is:
_DCRTIMP char*** __cdecl __p__environ (void);
#define _environ (*__p__environ())
So it is evident that this could be problematic.
The old declaration was required by the old MSVCRT library, but we
don't support that anymore with MSVC.
To fix, disable the re-declaration in ps_status.c, and also in some
other places that use the same code pattern but didn't trigger the
warning.
Then we can also re-enable the warning (delete the disablement in
meson.build).
Reviewed-by: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/bf060644-47ff-441b-97cf-c685d0827757@eisentraut.org
This commit adds a new column, seq_sync_error_count, to the
pg_stat_subscription_stats view. This counter tracks the number of errors
encountered by the sequence synchronization worker during operation.
Since a single worker handles the synchronization of all sequences, this
value may reflect errors from multiple sequences. This addition improves
observability of sequence synchronization behavior and helps monitor
potential issues during replication.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Until now BufferDesc.state was not allowed to be modified while the buffer
header spinlock was held. This meant that operations like unpinning buffers
needed to use a CAS loop, waiting for the buffer header spinlock to be
released before updating.
The benefit of that restriction is that it allowed us to unlock the buffer
header spinlock with just a write barrier and an unlocked write (instead of a
full atomic operation). That was important to avoid regressions in
48354581a49c. However, since then the hottest buffer header spinlock uses have
been replaced with atomic operations (in particular, the most common use of
PinBuffer_Locked(), in GetVictimBuffer() (formerly in BufferAlloc()), has been
removed in 5e899859287).
This change will allow, in a subsequent commit, to release buffer pins with a
single atomic-sub operation. This previously was not possible while such
operations were not allowed while the buffer header spinlock was held, as an
atomic-sub would not have allowed a race-free check for the buffer header lock
being held.
Using atomic-sub to unpin buffers is a nice scalability win, however it is not
the primary motivation for this change (although it would be sufficient). The
primary motivation is that we would like to merge the buffer content lock into
BufferDesc.state, which will result in more frequent changes of the state
variable, which in some situations can cause a performance regression, due to
an increased CAS failure rate when unpinning buffers. The regression entirely
vanishes when using atomic-sub.
Naively implementing this would require putting CAS loops in every place
modifying the buffer state while holding the buffer header lock. To avoid
that, introduce UnlockBufHdrExt(), which can set/add flags as well as the
refcount, together with releasing the lock.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
Test failure on buildfarm member prion:
The test failed due to an unexpected LOCATION: line appearing between the
WARNING and ERROR messages. This occurred because the prion machine uses
log_error_verbosity = verbose, which includes additional context in error
messages. The test was originally checking for both WARNING and ERROR
messages in sequence sync, but the extra LOCATION: line disrupted this
pattern. To make the test robust across different verbosity settings, it
now only checks for the presence of the WARNING message after the test,
which is sufficient to validate the intended behavior.
Failure to sync sequences with quoted names:
The previous implementation did not correctly quote sequence names when
querying remote information, leading to failures when quoted sequence
names were used. This fix ensures that sequence names are properly quoted
during remote queries, allowing sequences with quoted identifiers to be
synced correctly.
Author: Vignesh C <vignesh21@gmail.com>
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CALDaNm0WcdSCoNPiE-5ek4J2dMJ5o111GPTzKCYj9G5i=ONYtQ@mail.gmail.com
Discussion: https://postgr.es/m/CAOzEurQOSN=Zcp9uVnatNbAy=2WgMTJn_DYszYjv0KUeQX_e_A@mail.gmail.com
03d40e4b5 added code to provide better row estimates for when a UNION
query ended up only with a single child due to other children being
found to be dummy rels. In that case, ordinarily it would be ok to call
estimate_num_groups() on the targetlist of the only child path, however
that's not safe to do if the UNION child is the result of some other set
operation as we generate targetlists containing Vars with varno==0 for
those, which estimate_num_groups() can't handle. This could lead to:
ERROR: XX000: no relation entry for relid 0
Fix this by avoiding doing this when the only child is the result of
another set operation. In that case we'll fall back on the
assume-all-rows-are-unique method.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/cfbc99e5-9d44-4806-ba3c-f36b57a85e21@gmail.com
In generate_orderedappend_paths(), there is an assumption that a child
relation's row estimate is always greater than zero. There is an
Assert verifying this assumption, and the estimate is also used to
convert an absolute tuple count into a fraction.
However, this assumption is not always valid -- for example, upper
relations can have their row estimates unset, resulting in a value of
zero. This can cause an assertion failure in debug builds or lead to
the tuple fraction being computed as infinity in production builds.
To fix, use the row estimate from the cheapest_total path to compute
the tuple fraction. The row estimate in this path should already have
been forced to a valid value.
In passing, update the comment for generate_orderedappend_paths() to
note that the function also considers the cheapest-fractional case
when not all tuples need to be retrieved. That is, it collects all
the cheapest fractional paths and builds an ordered append path for
each interesting ordering.
Backpatch to v18, where this issue was introduced.
Bug: #19102
Reported-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Discussion: https://postgr.es/m/19102-93480667e1200169@postgresql.org
Backpatch-through: 18
The test introduced by 17b2d5ec759c verifies that a WAL receiver
survives across a timeline jump by searching the server logs for
termination messages. However, it called restart() before the timeline
switch, which kills the WAL receiver and may log the exact message being
checked, hence failing the test. As TAP tests reuse the same log file
across restarts, a rotate_logfile() is used before the restart so as the
log matching check is not impacted by log entries generated by a
previous shutdown.
Recent changes to file handle inheritance altered I/O timing enough to
make this fail consistently while testing another patch.
While on it, this adds an extra check based on a PID comparison. This
test may lead to false positives as it could be possible that the WAL
receiver has processed a timeline jump before the initial PID is
grabbed, but it should be good enough in most cases.
Like 17b2d5ec759c, backpatch down to v13.
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/9d00b597-d64a-4f1e-802e-90f9dc394c70@gmail.com
Backpatch-through: 13
This patch introduces sequence synchronization. Sequences that are synced
will have 2 states:
- INIT (needs [re]synchronizing)
- READY (is already synchronized)
A new sequencesync worker is launched as needed to synchronize sequences.
A single sequencesync worker is responsible for synchronizing all
sequences. It begins by retrieving the list of sequences that are flagged
for synchronization, i.e., those in the INIT state. These sequences are
then processed in batches, allowing multiple entries to be synchronized
within a single transaction. The worker fetches the current sequence
values and page LSNs from the remote publisher, updates the corresponding
sequences on the local subscriber, and finally marks each sequence as
READY upon successful synchronization.
Sequence synchronization occurs in 3 places:
1) CREATE SUBSCRIPTION
- The command syntax remains unchanged.
- The subscriber retrieves sequences associated with publications.
- Published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize all sequences.
2) ALTER SUBSCRIPTION ... REFRESH PUBLICATION
- The command syntax remains unchanged.
- Dropped published sequences are removed from pg_subscription_rel.
- Newly published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize only newly added
sequences.
3) ALTER SUBSCRIPTION ... REFRESH SEQUENCES
- A new command introduced for PG19 by f0b3573c3a.
- All sequences in pg_subscription_rel are reset to INIT state.
- Initiate the sequencesync worker to synchronize all sequences.
- Unlike "ALTER SUBSCRIPTION ... REFRESH PUBLICATION" command,
addition and removal of missing sequences will not be done in this
case.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Previously, unnamed portals were kept until the next Bind message or the
end of the transaction. This could cause temporary files to persist
longer than expected and make logging not reflect the actual SQL
responsible for the temporary file.
This patch changes exec_execute_message() to drop unnamed portals
immediately after execution to completion at the end of an Execute
message, making their removal more aggressive. This forces temporary
file cleanups to happen at the same time as the completion of the portal
execution, with statement logging correctly reflecting to which
statements these temporary files were attached to (see the diffs in the
TAP test updated by this commit for an idea).
The documentation is updated to describe the lifetime of unnamed
portals, and test cases are updated to verify temporary file removal and
proper statement logging after unnamed portal execution. This changes
how unnamed portals are handled in the protocol, hence no backpatch is
done.
Author: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Co-Authored-by: Sami Imseih <samimseih@gmail.com>
Co-Authored-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tTrTUoEr3kDXCuKsvqYGq8OOHiBwoD-dyJocq95uEOTQ%40mail.gmail.com
03d40e4b5 allowed dummy UNION [ALL] children to be removed from the plan
by checking for is_dummy_rel(). That commit neglected to still account
for the relids from the dummy rel so that the correct UPPERREL_SETOP
RelOptInfo could be found and used for adding the Paths to.
Not doing this could result in processing of subsequent UNIONs using the
same RelOptInfo as a previously processed UNION, which could result in
add_path() freeing old Paths that are needed by the previous UNION.
The same fix was independently submitted (2 mins later) by Richard Guo.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/bee34aec-659c-46f1-9ab7-7bbae0b7616c@gmail.com
We have never had a SET syntax that allows setting a GUC_LIST_INPUT
parameter to be an empty list. A locution such as
SET search_path = '';
doesn't mean that; it means setting the GUC to contain a single item
that is an empty string. (For search_path the net effect is much the
same, because search_path ignores invalid schema names and '' must be
invalid.) This is confusing, not least because configuration-file
entries and the set_config() function can easily produce empty-list
values.
We considered making the empty-string syntax do this, but that would
foreclose ever allowing empty-string items to be valid in list GUCs.
While there isn't any obvious use-case for that today, it feels like
the kind of restriction that might hurt someday. Instead, let's
accept the forbidden-up-to-now value NULL and treat that as meaning an
empty list. (An objection to this could be "what if we someday want
to allow NULL as a GUC value?". That seems unlikely though, and even
if we did allow it for scalar GUCs, we could continue to treat it as
meaning an empty list for list GUCs.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrei Klychkov <andrew.a.klychkov@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/CA+mfrmwsBmYsJayWjc8bJmicxc3phZcHHY=yW5aYe=P-1d_4bg@mail.gmail.com
It's possible to define BRIN indexes on functions that require a
snapshot to run, but the autosummarization feature introduced by commit
7526e10224f0 fails to provide one. This causes autovacuum to leave a
BRIN placeholder tuple behind after a failed work-item execution, making
such indexes less efficient. Repair by obtaining a snapshot prior to
running the task, and add a test to verify this behavior.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: Giovanni Fabris <giovanni.fabris@icon.it>
Reported-by: Arthur Nascimento <tureba@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511031106.h4fwyuyui6fz@alvherre.pgsql
Commit b4f584f9d2a1 (affecting v15~, later backpatched down to 13 as of
3635a0a35aaf) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2a1: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
Several functions in the codebase accept "Datum *" parameters but do
not modify the pointed-to data. These have been updated to take
"const Datum *" instead, improving type safety and making the
interfaces clearer about their intent. This change helps the compiler
catch accidental modifications and better documents immutability of
arguments.
Most of "Datum *" parameters have a pairing "bool *isnull" parameter,
they are constified as well.
No functional behavior is changed by this patch.
Author: Chao Li <lic@highgo.com>
Discussion: https://www.postgresql.org/message-id/flat/CAEoWx2msfT0knvzUa72ZBwu9LR_RLY4on85w2a9YpE-o2By5HQ@mail.gmail.com
The test introduced by this commit checks that a reload of
primary_conninfo leads to a WAL receiver restarted, by looking at the
request generated in the server logs. This is something for what there
was no coverage.
This has come up for a different patch, while discussing a regression
where a WAL receiver should not be stopped while waiting for a new
position to stream, like at the end of a timeline. In the case of the
other patch, we want to check that this log entry is not generated, but
if the error message is reworded the test would become silently broken.
The test of this commit ensures that we at least keep track the log
message format, for a supported scenario.
Extracted from a larger patch by the same author.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/aQKlC1v2_MXGV6_9@paquier.xyz
RIGHT_SEMI joins rely on the HEAP_TUPLE_HAS_MATCH flag to guarantee
that only the first match for each inner tuple is considered.
However, in a parallel hash join, the inner relation is stored in a
shared global hash table that can be probed by multiple workers
concurrently. This allows different workers to inspect and set the
match flags of the same inner tuples at the same time.
If two workers probe the same inner tuple concurrently, both may see
the match flag as unset and emit the same tuple, leading to duplicate
output rows and violating RIGHT_SEMI join semantics.
For now, we disable parallel plans for RIGHT_SEMI joins. In the long
term, it may be possible to support parallel execution by performing
atomic operations on the match flag, for example using a CAS or
similar mechanism.
Backpatch to v18, where RIGHT_SEMI join was introduced.
Bug: #19094
Reported-by: Lori Corbani <Lori.Corbani@jax.org>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19094-6ed410eb5b256abd@postgresql.org
Backpatch-through: 18
This new counter, called "wal_fpi_bytes", tracks the total amount in
bytes of full page images (FPIs) generated in WAL. This data becomes
available globally via pg_stat_wal, and for backend statistics via
pg_stat_get_backend_wal().
Previously, this information could only be retrieved with pg_waldump or
pg_walinspect, which may not be available depending on the environment,
and are expensive to execute. It offers hints about how much FPIs
impact the WAL generated, which could be a large percentage for some
workloads, as well as the effects of wal_compression or page holes.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the addition of wal_fpi_bytes in
PgStat_WalCounters.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOzEurQtZEAfg6P0kU3Wa-f9BWQOi0RzJEMPN56wNTOmJLmfaQ@mail.gmail.com
Two tests are changed in this commit:
- libpq's 006_service
- ldap's 003_ldap_connection_param_lookup
CRLF translation is already handled by the text mode, so there should be
need for any specific logic. See also 1c6d4629394d, msys perl being one
case where the translation mattered.
Note: This is first applied on HEAD, and backpatch will follow once the
buildfarm has provided an opinion about this commit.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/aPsh39bxwYKvUlAf@paquier.xyz
Backpatch-through: 13
The existing RLS tests focus on the outcomes of various testing
scenarios, rather than the exact policies applied. This sometimes
makes it hard to see why a particular result occurred (e.g., which
policy failed), or to construct a test that fails a particular policy
check without an earlier check failing. These new tests issue NOTICE
messages to show the actual policies applied for each command type,
including the different paths through INSERT ... ON CONFLICT and
MERGE, making it easier to verify the expected behaviour.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Viktor Holmberg <v@viktorh.net>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWqnfeChjK=n1V_dYZT4rt4mnq+ybf9c0qXDYTVMsy8pg@mail.gmail.com
Previously, the check_hook for synchronized_standby_slots attempted to
validate that each specified slot existed and was physical. However, these
checks were not performed during server startup. As a result, if users
configured non-existent slots before startup, the misconfiguration would
go undetected initially. This could later cause parallel query failures,
as newly launched workers would detect the issue and raise an ERROR.
This patch improves the check_hook by validating the syntax and format of
slot names. Validation of slot existence and type is deferred to the WAL
sender process, aligning with the behavior of the check_hook for
primary_slot_name.
Reported-by: Fabrice Chapuis <fabrice636861@gmail.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/CAA5-nLCeO4MQzWipCXH58qf0arruiw0OeUc1+Q=Z=4GM+=v1NQ@mail.gmail.com
Ensure that the target table on the subscriber exists before executing any
DML intended for replication.
Currently, if the table is missing, the replication logic keeps retrying
until the table is eventually created by the test. Although this behaviour
does not cause test failures, since the table is created after the INSERT
is published and replication eventually succeeds, however, it introduces
unnecessary looping and delays.
Author: Grem Snoort <grem.snoort@gmail.com>
Discussion: https://postgr.es/m/CANV9Qw5HD7=Fp4nox2O7DoVctHoabRRVW9Soo4A=QipqW5B=Tg@mail.gmail.com
When dealing with ResultRelInfos for partitions, there are cases where
there are mixed requirements for the ri_RootResultRelInfo. There are
cases when the partition itself requires a NULL ri_RootResultRelInfo and
in the same query, the same partition may require a ResultRelInfo with
its parent set in ri_RootResultRelInfo. This could cause the column
mapping between the partitioned table and the partition not to be done
which could result in crashes if the column attnums didn't match
exactly.
The fix is simple. We now check that the ri_RootResultRelInfo matches
what the caller passed to ExecGetTriggerResultRel() and only return a
cached ResultRelInfo when the ri_RootResultRelInfo matches what the
caller wants, otherwise we'll make a new one.
Author: David Rowley <dgrowleyml@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reported-by: Dmitry Fomin <fomin.list@gmail.com>
Discussion: https://postgr.es/m/7DCE78D7-0520-4207-822B-92F60AEA14B4@gmail.com
Backpatch-through: 15
When testing 128/32-bit division in the test_int128 test module, make
sure that we don't attempt to divide by zero.
While at it, use pg_prng_int64() and pg_prng_int32() to generate the
random numbers required for the tests, rather than pg_prng_uint64().
This eliminates the need for any implicit or explicit type casts.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/da4wqngd6gwz5s4yf5y5f75xj7gpja62l4dbp6w4j3vs7fcjue@upvolcu4e6o2
This patch adds support for a new SQL command:
ALTER SUBSCRIPTION ... REFRESH SEQUENCES
This command updates the sequence entries present in the
pg_subscription_rel catalog table with the INIT state to trigger
resynchronization.
In addition to the new command, the following subscription commands have
been enhanced to automatically refresh sequence mappings:
ALTER SUBSCRIPTION ... REFRESH PUBLICATION
ALTER SUBSCRIPTION ... ADD PUBLICATION
ALTER SUBSCRIPTION ... DROP PUBLICATION
ALTER SUBSCRIPTION ... SET PUBLICATION
These commands will perform the following actions:
Add newly published sequences that are not yet part of the subscription.
Remove sequences that are no longer included in the publication.
This ensures that sequence replication remains aligned with the current
state of the publication on the publisher side.
Note that the actual synchronization of sequence data/values will be
handled in a subsequent patch that introduces a dedicated sequence sync
worker.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
These are listing which other tests one of the tests in the subsequent
group depends on. A couple of comments were located with unrelated
tests.
In passing, fix a small grammatical issue.
Noticed in passing while working on something else.
Author: David Rowley <dgrowleyml@gmail.com>
67a54b9e8 taught the planner to push down HAVING clauses even when
grouping sets are present, as long as the clause does not reference
any columns that are nullable by the grouping sets. However, there
was an oversight: if any empty grouping sets are present, the
aggregation node can produce a row that did not come from the input,
and pushing down a HAVING clause in this case may cause us to fail to
filter out that row.
Currently, non-degenerate HAVING clauses are not pushed down when
empty grouping sets are present, since the empty grouping sets would
nullify the vars they reference. However, degenerate (variable-free)
HAVING clauses are not subject to this restriction and may be
incorrectly pushed down.
To fix, explicitly check for the presence of empty grouping sets and
retain degenerate clauses in HAVING when they are present. This
ensures that we don't emit a bogus aggregated row. A copy of each
such clause is also put in WHERE so that query_planner() can use it in
a gating Result node.
To facilitate this check, this patch expands the groupingSets tree of
the query to a flat list of grouping sets before applying the HAVING
pushdown optimization. This does not add any additional planning
overhead, since we need to do this expansion anyway.
In passing, make a small tweak to preprocess_grouping_sets() by
reordering its initial operations a bit.
Backpatch to v18, where this issue was introduced.
Reported-by: Yuhang Qiu <iamqyh@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/0879D9C9-7FE2-4A20-9593-B23F7A0B5290@gmail.com
Backpatch-through: 18
The revised logic in 001_ssltests.pl would fail if openssl
doesn't work or if Perl is a 32-bit build, because it had
already overwritten $serialno with something inappropriate
to use in the eventual match. We could go back to the
previous code layout, but it seems best to introduce a
separate variable for the output of openssl.
Per failure on buildfarm member mamba, which has a 32-bit Perl.
It is possible to have a non-inherited not-null constraint on an
inherited column, but we were failing to preserve such constraints
during pg_upgrade where the source is 17 or older, because of a bug in
the pg_dump query for it. Oversight in commit 14e87ffa5c54. Fix that
query. In passing, touch-up a bogus nearby comment introduced by the
same commit.
In version 17, make the regression tests leave a table in this
situation, so that this scenario is tested in the cross-version upgrade
tests of 18 and up.
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reported-by: Andrew Bille <andrewbille@gmail.com>
Bug: #19074
Backpatch-through: 18
Discussion: https://postgr.es/m/19074-ae2548458cf0195c@postgresql.org
The SSL tests for pg_stat_ssl tries to exactly match the serial
from the certificate by extracting it with the openssl binary.
If that fails due to the binary not being available, a fallback
match is used, but the attempt to execute a missing binary adds
a warning to the output which can confuse readers for a failure
in the test. Fix by only attempting if the openssl binary was
found by autoconf/meson.
Backpatch down to v16 where commit c8e4030d1bdd made the test
use the OPENSSL variable from autoconf/meson instead of a hard-
coded value.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aNPSp1-RIAs3skZm@msg.df7cb.de
Backpatch-through: 16
The TAP tests whose ok() calls are changed in this commit were relying
on perl operators, rather than equivalents available in Test::More. For
example, rather than the following:
ok($data =~ qr/expr/m, "expr matching");
ok($data !~ qr/expr/m, "expr not matching");
The new test code uses this equivalent:
like($data, qr/expr/m, "expr matching");
unlike($data, qr/expr/m, "expr not matching");
A huge benefit of the new formulation is that it is possible to know
about the values we are checking if a failure happens, making debugging
easier, should the test runs happen in the buildfarm, in the CI or
locally.
This change leads to more test code overall as perltidy likes to make
the code pretty the way it is in this commit.
Author: Sadhuprasad Patro <b.sadhu@gmail.com>
Discussion: https://postgr.es/m/CAFF0-CHhwNx_Cv2uy7tKjODUbeOgPrJpW4Rpf1jqB16_1bU2sg@mail.gmail.com
042_low_level_backup compared the result of a query two times with a
comparison operator based on an integer, while the result should be
compared with a string.
The outcome of the tests is currently not impacted by this change.
However, it could be possible that the tests fail to detect future
issues if the query results become different, for some reason.
Oversight in 99b4a63bef94.
Author: Sadhuprasad Patro <b.sadhu@gmail.com>
Discussion: https://postgr.es/m/CAFF0-CHhwNx_Cv2uy7tKjODUbeOgPrJpW4Rpf1jqB16_1bU2sg@mail.gmail.com
Backpatch-through: 17
EvalPlanQualStart() failed to propagate es_partition_directory into
the child EState used for EPQ rechecks. When execution time partition
pruning ran during the EPQ scan, executor code dereferenced a NULL
partition directory and crashed.
Previously, propagating es_partition_directory into the EPQ EState was
unnecessary because CreatePartitionPruneState(), which sets it on
demand, also initialized the exec-pruning context. After commit
d47cbf474, CreatePartitionPruneState() now initializes only the init-
time pruning context, leaving exec-pruning context initialization to
ExecInitNode(). Since EvalPlanQualStart() runs only ExecInitNode() and
not CreatePartitionPruneState(), it can encounter a NULL
es_partition_directory. Other executor fields initialized during
CreatePartitionPruneState() are already copied into the child EState
thanks to commit 8741e48e5d, but es_partition_directory was missed.
Fix by borrowing the parent estate's es_partition_directory in
EvalPlanQualStart(), and by clearing that field in EvalPlanQualEnd()
so the parent remains responsible for freeing the directory.
Add an isolation test permutation that triggers EPQ with execution-
time partition pruning, the case that reproduces this crash.
Bug: #19078
Reported-by: Yuri Zamyatin <yuri@yrz.am>
Diagnosed-by: David Rowley <dgrowleyml@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/19078-dfd62f840a2c0766@postgresql.org
Backpatch-through: 18
Per report from buildfarm member prion. The CI does not use this
parameter, and this buildfarm member sets log_error_verbosity to
"verbose". This would generate extra LOCATION entries in the logs,
causing the regexps of the test to fail.
Trying to support log_error_verbosity=verbose in the test would mean to
tweak all the regexps used in the test to detect an optional set of
LOCATION lines, at least. This would not improve the coverage, and
forcing the GUC value is simpler.
Oversight in 76bba033128a.
Discussion: https://postgr.es/m/aPBaNNGiYT3xMBN1@paquier.xyz
