This reverts commit b840508644 and bcb14f4abc. These commits were made
for commit 5bec1d6bc5 (Improve eviction algorithm in ReorderBuffer
using max-heap for many subtransactions). However, per discussion,
commit efb8acc0d0 replaced binary heap + index with pairing heap, and
made these commits unnecessary.
Reported-by: Jeff Davis
Discussion: https://postgr.es/m/12747c15811d94efcc5cda72d6b35c80d7bf3443.camel%40j-davis.com
A pairing heap can perform the same operations as the binary heap +
index, with as good or better algorithmic complexity, and that's an
existing data structure so that we don't need to invent anything new
compared to v16. This commit makes the new binaryheap functionality
that was added in commits b840508644 and bcb14f4abc unnecessary, but
they will be reverted separately.
Remove the optimization to only build and maintain the heap when the
amount of memory used is close to the limit, becuase the bookkeeping
overhead with the pairing heap seems to be small enough that it
doesn't matter in practice.
Reported-by: Jeff Davis
Author: Heikki Linnakangas
Reviewed-by: Michael Paquier, Hayato Kuroda, Masahiko Sawada
Discussion: https://postgr.es/m/12747c15811d94efcc5cda72d6b35c80d7bf3443.camel%40j-davis.com
Previously, the decision to store values in leaves or within the child
pointer was made at compile time, with variable length values using
leaves by necessity. This commit allows introspecting the length of
variable length values at runtime for that decision. This requires
the ability to tell whether the last-level child pointer is actually
a value, so we use a pointer tag in the lowest level bit.
Use this in TID store. This entails adding a byte to the header to
reserve space for the tag. Commit f35bd9bf3 stores up to three offsets
within the header with no bitmap, and now the header can be embedded
as above. This reduces worst-case memory usage when TIDs are sparse.
Reviewed (in an earlier version) by Masahiko Sawada
Discussion: https://postgr.es/m/CANWCAZYw+_KAaUNruhJfE=h6WgtBKeDG32St8vBJBEY82bGVRQ@mail.gmail.com
Discussion: https://postgr.es/m/CAD21AoBci3Hujzijubomo1tdwH3XtQ9F89cTNQ4bsQijOmqnEw@mail.gmail.com
While keeping API the same, this commit provides a way for block-level table
AMs to re-use existing acquire_sample_rows() by providing custom callbacks
for getting the next block and the next tuple.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240407214001.jgpg5q3yv33ve6y3%40awork3.anarazel.de
Reviewed-by: Pavel Borisov
Let table AM define custom reloptions for its tables. This allows specifying
AM-specific parameters by the WITH clause when creating a table.
The reloptions, which could be used outside of table AM, are now extracted
into the CommonRdOptions data structure. These options could be by decision
of table AM directly specified by a user or calculated in some way.
The new test module test_tam_options evaluates the ability to set up custom
reloptions and calculate fields of CommonRdOptions on their base.
The code may use some parts from prior work by Hao Wu.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Discussion: https://postgr.es/m/AMUA1wBBBxfc3tKRLLdU64rb.1.1683276279979.Hmail.wuhao%40hashdata.cn
Reviewed-by: Reviewed-by: Pavel Borisov, Matthias van de Meent, Jess Davis
While SH_STAT() is only used for debugging, the allocated array can be large,
and therefore should be freed.
It's unclear why coverity started warning now.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Coverity
Discussion: https://postgr.es/m/3005248.1712538233@sss.pgh.pa.us
Backpatch: 12-
libpq now always tries to send ALPN. With the traditional negotiated
SSL connections, the server accepts the ALPN, and refuses the
connection if it's not what we expect, but connecting without ALPN is
still OK. With the new direct SSL connections, ALPN is mandatory.
NOTE: This uses "TBD-pgsql" as the protocol ID. We must register a
proper one with IANA before the release!
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
By skipping SSLRequest, you can eliminate one round-trip when
establishing a TLS connection. It is also more friendly to generic TLS
proxies that don't understand the PostgreSQL protocol.
This is disabled by default in libpq, because the direct TLS handshake
will fail with old server versions. It can be enabled with the
sslnegotation=direct option. It will still fall back to the negotiated
TLS handshake if the server rejects the direct attempt, either because
it is an older version or the server doesn't support TLS at all, but
the fallback can be disabled with the sslnegotiation=requiredirect
option.
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
Replace (expr op C1) OR (expr op C2) ... with expr op ANY(ARRAY[C1, C2, ...])
on the preliminary stage of optimization when we are still working with the
expression tree.
Here Cn is a n-th constant expression, 'expr' is non-constant expression, 'op'
is an operator which returns boolean result and has a commuter (for the case
of reverse order of constant and non-constant parts of the expression,
like 'Cn op expr').
Sometimes it can lead to not optimal plan. This is why there is a
or_to_any_transform_limit GUC. It specifies a threshold value of length of
arguments in an OR expression that triggers the OR-to-ANY transformation.
Generally, more groupable OR arguments mean that transformation will be more
likely to win than to lose.
Discussion: https://postgr.es/m/567ED6CA.2040504%40sigaev.ru
Author: Alena Rybakina <lena.ribackina@yandex.ru>
Author: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
29f6a959c added a bump allocator type for efficient compact allocations.
Here we make use of this for non-bounded tuplesorts to store tuples.
This is very space efficient when storing narrow tuples due to bump.c
not having chunk headers. This means we can fit more tuples in work_mem
before spilling to disk, or perform an in-memory sort touching fewer
cacheline.
Author: David Rowley
Reviewed-by: Nathan Bossart
Reviewed-by: Matthias van de Meent
Reviewed-by: Tomas Vondra
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
This tracks the position of WAL that's been fully copied into WAL
buffers by all processes emitting WAL. (For some reason we call that
"WAL insertion"). This is updated using atomic monotonic advance during
WaitXLogInsertionsToFinish, which is not when the insertions actually
occur, but it's the only place where we know where have all the
insertions have completed.
This value is useful in WALReadFromBuffers, which can verify that
callers don't try to read past what has been inserted. (However, more
infrastructure is needed in order to actually use WAL after the flush
point, since it could be lost.)
The value is also useful in WaitXLogInsertionsToFinish() itself, since
we can now exit quickly when all WAL has been already inserted, without
even having to take any locks.
This introduces a bump MemoryContext type. The bump context is best
suited for short-lived memory contexts which require only allocations
of memory and never a pfree or repalloc, which are unsupported.
Memory palloc'd into a bump context has no chunk header. This makes
bump a useful context type when lots of small allocations need to be
done without any need to pfree those allocations. Allocation sizes are
rounded up to the next MAXALIGN boundary, so with this and no chunk
header, allocations are very compact indeed.
Allocations are also very fast as bump does not check any freelists to
try and make use of previously free'd chunks. It just checks if there
is enough room on the current block, and if so it bumps the freeptr
beyond this chunk and returns the value that the freeptr was previously
pointing to. Simple and fast. A new block is malloc'd when there's not
enough space in the current block.
Code using the bump allocator must take care never to call any functions
which could try to call realloc() (or variants), pfree(),
GetMemoryChunkContext() or GetMemoryChunkSpace() on a bump allocated
chunk. Due to lack of chunk headers, these operations are unsupported.
To increase the chances of catching such issues, when compiled with
MEMORY_CONTEXT_CHECKING, bump allocated chunks are given a header and
any attempt to perform an unsupported operation will result in an ERROR.
Without MEMORY_CONTEXT_CHECKING, code attempting an unsupported
operation could result in a segfault.
A follow-on commit will implement the first user of bump.
Author: David Rowley
Reviewed-by: Nathan Bossart
Reviewed-by: Matthias van de Meent
Reviewed-by: Tomas Vondra
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
Reserve 4 bits for MemoryContextMethodID rather than 3. 3 bits did
technically allow a maximum of 8 memory context types, however, we've
opted to reserve some bit patterns which left us with only 4 slots, all
of which were used.
Here we add another bit which frees up 8 slots for future memory context
types.
In passing, adjust the enum names in MemoryContextMethodID to make it
more clear which ones can be used and which ones are reserved.
Author: Matthias van de Meent, David Rowley
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
Commit 792752af4e added infrastructure for using AVX-512 intrinsic
functions, and this commit uses that infrastructure to optimize
visibilitymap_count(). Specificially, a new pg_popcount_masked()
function is introduced that applies a bitmask to every byte in the
buffer prior to calculating the population count, which is used to
filter out the all-visible or all-frozen bits as needed. Platforms
without AVX-512 support should also see a nice speedup due to the
reduced number of calls to a function pointer.
Co-authored-by: Ants Aasma
Discussion: https://postgr.es/m/BL1PR11MB5304097DF7EA81D04C33F3D1DCA6A%40BL1PR11MB5304.namprd11.prod.outlook.com
Presently, pg_popcount() processes data in 32-bit or 64-bit chunks
when possible. Newer hardware that supports AVX-512 instructions
can use 512-bit chunks, which provides a nice speedup, especially
for larger buffers. This commit introduces the infrastructure
required to detect compiler and CPU support for the required
AVX-512 intrinsic functions, and it adds a new pg_popcount()
implementation that uses these functions. If CPU support for this
optimized implementation is detected at runtime, a function pointer
is updated so that it is used by subsequent calls to pg_popcount().
Most of the existing in-tree calls to pg_popcount() should benefit
from these instructions, and calls with smaller buffers should at
least not regress compared to v16. The new infrastructure
introduced by this commit can also be used to optimize
visibilitymap_count(), but that is left for a follow-up commit.
Co-authored-by: Paul Amonson, Ants Aasma
Reviewed-by: Matthias van de Meent, Tom Lane, Noah Misch, Akash Shankaran, Alvaro Herrera, Andres Freund, David Rowley
Discussion: https://postgr.es/m/BL1PR11MB5304097DF7EA81D04C33F3D1DCA6A%40BL1PR11MB5304.namprd11.prod.outlook.com
Commit 7c70996ebf0949b142 introduced an optimization to allow bitmap
scans to operate like index-only scans by not fetching a block from the
heap if none of the underlying data is needed and the block is marked
all visible in the visibility map.
With the introduction of table AMs, a FIXME was added to this code
indicating that the skip_fetch logic should be pushed into the table
AM-specific code, as not all table AMs may use a visibility map in the
same way.
This commit resolves this FIXME for the current block. The layering
violation is still present in BitmapHeapScans's prefetching code, which
uses the visibility map to decide whether or not to prefetch a block.
However, this can be addressed independently.
Author: Melanie Plageman
Reviewed-by: Andres Freund, Heikki Linnakangas, Tomas Vondra, Mark Dilger
Discussion: https://postgr.es/m/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
This new DDL command splits a single partition into several parititions.
Just like ALTER TABLE ... MERGE PARTITIONS ... command, new patitions are
created using createPartitionTable() function with parent partition as the
template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
This new DDL command merges several partitions into the one partition of the
target table. The target partition is created using new
createPartitionTable() function with parent partition as the template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
Not just WaitLSNState.waitersHeap, but also WaitLSNState.procInfos and
updating of WaitLSNState.minWaitedLSN is protected by WaitLSNLock. There
is one now documented exclusion on fast-path checking of
WaitLSNProcInfo.inHeap flag.
Discussion: https://postgr.es/m/202404030658.hhj3vfxeyhft%40alvherre.pgsql
Commit 9e8da0f7 taught nbtree to handle ScalarArrayOpExpr quals
natively. This works by pushing down the full context (the array keys)
to the nbtree index AM, enabling it to execute multiple primitive index
scans that the planner treats as one continuous index scan/index path.
This earlier enhancement enabled nbtree ScalarArrayOp index-only scans.
It also allowed scans with ScalarArrayOp quals to return ordered results
(with some notable restrictions, described further down).
Take this general approach a lot further: teach nbtree SAOP index scans
to decide how to execute ScalarArrayOp scans (when and where to start
the next primitive index scan) based on physical index characteristics.
This can be far more efficient. All SAOP scans will now reliably avoid
duplicative leaf page accesses (just like any other nbtree index scan).
SAOP scans whose array keys are naturally clustered together now require
far fewer index descents, since we'll reliably avoid starting a new
primitive scan just to get to a later offset from the same leaf page.
The scan's arrays now advance using binary searches for the array
element that best matches the next tuple's attribute value. Required
scan key arrays (i.e. arrays from scan keys that can terminate the scan)
ratchet forward in lockstep with the index scan. Non-required arrays
(i.e. arrays from scan keys that can only exclude non-matching tuples)
"advance" without the process ever rolling over to a higher-order array.
Naturally, only required SAOP scan keys trigger skipping over leaf pages
(non-required arrays cannot safely end or start primitive index scans).
Consequently, even index scans of a composite index with a high-order
inequality scan key (which we'll mark required) and a low-order SAOP
scan key (which we won't mark required) now avoid repeating leaf page
accesses -- that benefit isn't limited to simpler equality-only cases.
In general, all nbtree index scans now output tuples as if they were one
continuous index scan -- even scans that mix a high-order inequality
with lower-order SAOP equalities reliably output tuples in index order.
This allows us to remove a couple of special cases that were applied
when building index paths with SAOP clauses during planning.
Bugfix commit 807a40c5 taught the planner to avoid generating unsafe
path keys: path keys on a multicolumn index path, with a SAOP clause on
any attribute beyond the first/most significant attribute. These cases
are now all safe, so we go back to generating path keys without regard
for the presence of SAOP clauses (just like with any other clause type).
Affected queries can now exploit scan output order in all the usual ways
(e.g., certain "ORDER BY ... LIMIT n" queries can now terminate early).
Also undo changes from follow-up bugfix commit a4523c5a, which taught
the planner to produce alternative index paths, with path keys, but
without low-order SAOP index quals (filter quals were used instead).
We'll no longer generate these alternative paths, since they can no
longer offer any meaningful advantages over standard index qual paths.
Affected queries thereby avoid all of the disadvantages that come from
using filter quals within index scan nodes. They can avoid extra heap
page accesses from using filter quals to exclude non-matching tuples
(index quals will never have that problem). They can also skip over
irrelevant sections of the index in more cases (though only when nbtree
determines that starting another primitive scan actually makes sense).
There is a theoretical risk that removing restrictions on SAOP index
paths from the planner will break compatibility with amcanorder-based
index AMs maintained as extensions. Such an index AM could have the
same limitations around ordered SAOP scans as nbtree had up until now.
Adding a pro forma incompatibility item about the issue to the Postgres
17 release notes seems like a good idea.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wz=ksvN_sjcnD1+Bt-WtifRA5ok48aDYnq3pkKhxgMQpcw@mail.gmail.com
After encountering the NUL terminator, the word-at-a-time loop exits
and we must hash the remaining bytes. Previously we calculated
the terminator's position and re-loaded the remaining bytes from
the input string. This was slower than the unaligned case for very
short strings. We already have all the data we need in a register,
so let's just mask off the bytes we need and hash them immediately.
In addition to endianness issues, the previous attempt upset valgrind
in the way it computed the mask. Whether by accident or by wisdom,
the author's proposed method passes locally with valgrind 3.22.
Ants Aasma, with cosmetic adjustments by me
Discussion: https://postgr.es/m/CANwKhkP7pCiW_5fAswLhs71-JKGEz1c1%2BPC0a_w1fwY4iGMqUA%40mail.gmail.com
This function previously used a mix of word-wise loads and bytewise
loads. The bytewise loads happened to be little-endian regardless of
platform. This in itself is not a problem. However, a future commit
will require the same result whether A) the input is loaded as a
word with the relevent bytes masked-off, or B) the input is loaded
one byte at a time.
While at it, improve debuggability of the internal hash state.
Discussion: https://postgr.es/m/CANWCAZZpuV1mES1mtSpAq8tWJewbrv4gEz6R_k4gzNG8GZ5gag%40mail.gmail.com
While pinning extra buffers to look ahead, users of strategies are in
danger of using too many buffers. For some strategies, that means
"escaping" from the ring, and in others it means forcing dirty data to
disk very frequently with associated WAL flushing. Since external code
has no insight into any of that, allow individual strategy types to
expose a clamp that should be applied when deciding how many buffers to
pin at once.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_aJXnqsyZt6HwFLnxYEBgE17oypkxbKbT1t1geE_wvH2Q%40mail.gmail.com
Remove duplicate hash_string_pointer() function definitions by creating
a new inline function hash_string() for this purpose.
This has the added advantage of avoiding strlen() calls when doing hash
lookup. It's not clear how many of these are perfomance-sensitive
enough to benefit from that, but the simplification is worth it on
its own.
Reviewed by Jeff Davis
Discussion: https://postgr.es/m/CANWCAZbg_XeSeY0a_PqWmWqeRATvzTzUNYRLeT%2Bbzs%2BYQdC92g%40mail.gmail.com
fasthash_accum_cstring_aligned() uses a technique, found in various
strlen() implementations, to detect a string's NUL terminator by
reading a word at at time. That triggers failures when testing with
"-fsanitize=address", at least with frontend code. To enable using
this function anywhere, add a function attribute macro to disable
such testing.
Reviewed by Jeff Davis
Discussion: https://postgr.es/m/CANWCAZbwvp7oUEkbw-xP4L0_S_WNKq-J-ucP4RCNDPJnrakUPw%40mail.gmail.com
Align blocks stored in incremental files to BLCKSZ, so that the
incremental backups work well with CoW filesystems.
The header of the incremental file is padded with \0 to a multiple of
BLCKSZ, so that the block data (also BLCKSZ) is aligned to BLCKSZ. The
padding is added only to files containing block data, so files with just
the header remain small. This adds a bit of extra space, but as the
number of blocks increases the overhead gets negligible very quickly.
And as the padding is \0 bytes, it does compress extremely well.
The alignment is important for CoW filesystems that usually require the
blocks to be aligned to filesystem page size for features like block
sharing, deduplication etc. to work well. With the variable sized header
the blocks in the increments were not aligned at all, negating the
benefits of the CoW filesystems.
This matters even for non-CoW filesystems, for example when placed on a
RAID array. If the block is not aligned, it may easily span multiple
devices, causing read and write amplification.
It might be better to align the blocks to the filesystem page, not
BLCKSZ, but we have no good way to determine that. Even if we determine
the page size at the time of taking the backup, the backup may move. For
now the BLCKSZ seems sufficient - the filesystem page is usually 4K, so
the default BLCKSZ (8K by default) is aligned to that.
Author: Tomas Vondra
Reviewed-by: Robert Haas, Jakub Wartak
Discussion: https://postgr.es/m/3024283a-7491-4240-80d0-421575f6bb23%40enterprisedb.com
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737cf4 are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This adds the infrastructure for using the new non-recursive JSON parser
in processing manifests. It's important that callers make sure that the
last piece of json handed to the incremental manifest parser contains
the entire last few lines of the manifest, including the checksum.
Author: Andrew Dunstan
Reviewed-By: Jacob Champion
Discussion: https://postgr.es/m/7b0a51d6-0d9d-7366-3a1a-f74397a02f55@dunslane.net
This parser uses an explicit prediction stack, unlike the present
recursive descent parser where the parser state is represented on the
call stack. This difference makes the new parser suitable for use in
incremental parsing of huge JSON documents that cannot be conveniently
handled piece-wise by the recursive descent parser. One potential use
for this will be in parsing large backup manifests associated with
incremental backups.
Because this parser is somewhat slower than the recursive descent
parser, it is not replacing that parser, but is an additional parser
available to callers.
For testing purposes, if the build is done with -DFORCE_JSON_PSTACK, all
JSON parsing is done with the non-recursive parser, in which case only
trivial regression differences in error messages should be observed.
Author: Andrew Dunstan
Reviewed-By: Jacob Champion
Discussion: https://postgr.es/m/7b0a51d6-0d9d-7366-3a1a-f74397a02f55@dunslane.net
To allow the use of the read stream API added in b5a9b18cd for
sequential scans on heap tables, here we make some adjustments to make
that change less invasive and perhaps make the code easier to follow in
the process.
Here heapgetpage() gets broken into two functions:
1) The part which reads the block has now been moved into a function
named heapfetchbuf().
2) The part which performed pruning and populated the scan's
rs_vistuples[] array is now moved into a new function named
heap_prepare_pagescan().
The functionality provided by heap_prepare_pagescan() was only ever
required by SO_ALLOW_PAGEMODE scans, so the branching that was
previously done in heapgetpage() is no longer needed as we simply just
don't call heap_prepare_pagescan() from heapgettup() in the refactored
code.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_YtXJiYKQvb5JsA2SkwrsizYLugs4sSOZh3EAjKUg=gEQ@mail.gmail.com
EXPLAIN (ANALYZE, SERIALIZE) allows collection of statistics about
the volume of data emitted by a query, as well as the time taken
to convert the data to the on-the-wire format. Previously there
was no way to investigate this without actually sending the data
to the client, in which case network transmission costs might
swamp what you wanted to see. In particular this feature allows
investigating the costs of de-TOASTing compressed or out-of-line
data during formatting.
Stepan Rutz and Matthias van de Meent,
reviewed by Tomas Vondra and myself
Discussion: https://postgr.es/m/ca0adb0e-fa4e-c37e-1cd7-91170b18cae1@gmx.de
If there aren't many bytes to process, the function call overhead
of the optimized implementation isn't worth taking, so instead we
inline a loop that consults pg_number_of_ones in that case. If
there are many bytes to process, we accept the function call
overhead because the optimized versions are likely to be faster.
The threshold at which we use the optimized implementation is set
to the smallest amount of data required to use special popcount
instructions.
Reviewed-by: Alvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20240402155301.GA2750455%40nathanxps13
Execute both freezing and pruning of tuples in the same
heap_page_prune() function, now called heap_page_prune_and_freeze(),
and emit a single WAL record containing all changes. That reduces the
overall amount of WAL generated.
This moves the freezing logic from vacuumlazy.c to the
heap_page_prune_and_freeze() function. The main difference in the
coding is that in vacuumlazy.c, we looked at the tuples after the
pruning had already happened, but in heap_page_prune_and_freeze() we
operate on the tuples before pruning. The heap_prepare_freeze_tuple()
function is now invoked after we have determined that a tuple is not
going to be pruned away.
VACUUM no longer needs to loop through the items on the page after
pruning. heap_page_prune_and_freeze() does all the work. It now
returns the list of dead offsets, including existing LP_DEAD items, to
the caller. Similarly it's now responsible for tracking 'all_visible',
'all_frozen', and 'hastup' on the caller's behalf.
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://www.postgresql.org/message-id/20240330055710.kqg6ii2cdojsxgje@liskov
06c418e163 introduced pg_wal_replay_wait() procedure allowing to wait for
the particular LSN to be replayed on standby. The waiters were stored in
the flat array. Even though scanning small arrays is fast, that might be a
problem at scale (a lot of waiting processes).
This commit replaces the flat shared memory array with the pairing heap,
which holds the waiter with the least LSN at the top. This gives us O(log N)
complexity for both inserting and removing waiters.
Reported-by: Alvaro Herrera
Discussion: https://postgr.es/m/202404030658.hhj3vfxeyhft%40alvherre.pgsql
We were directly copying the LSN locations while syncing the slots on the
standby. Now, it is possible that at some particular restart_lsn there are
some running xacts, which means if we start reading the WAL from that
location after promotion, we won't reach a consistent snapshot state at
that point. However, on the primary, we would have already been in a
consistent snapshot state at that restart_lsn so we would have just
serialized the existing snapshot.
To avoid this problem we will use the advance_slot functionality unless
the snapshot already exists at the synced restart_lsn location. This will
help us to ensure that snapbuilder/slot statuses are updated properly
without generating any changes. Note that the synced slot will remain as
RS_TEMPORARY till the decoding from corresponding restart_lsn can reach a
consistent snapshot state after which they will be marked as
RS_PERSISTENT.
Per buildfarm
Author: Hou Zhijie
Reviewed-by: Bertrand Drouvot, Shveta Malik, Bharath Rupireddy, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716B3942AE49F3F725ACA92943B2@OS0PR01MB5716.jpnprd01.prod.outlook.com
Previously, when selecting the transaction to evict during logical
decoding, we check all transactions to find the largest
transaction. This could lead to a significant replication lag
especially in the case where there are many subtransactions.
This commit improves the eviction algorithm in ReorderBuffer using the
max-heap with transaction size as the key to efficiently find the
largest transaction.
The max-heap starts with empty. While the max-heap is empty, we don't
do anything for the max-heap when updating the memory
counter. Therefore, we get the largest transaction in O(N) time, where
N is the number of transactions including top-level transactions and
subtransactions.
We build the max-heap just before selecting the largest transactions
if the number of transactions being decoded is higher than the
threshold, MAX_HEAP_TXN_COUNT_THRESHOLD. After building the max-heap,
we also update the max-heap when updating the memory counter. The
intention is to efficiently find the largest transaction in O(1) time
instead of incurring the cost of memory counter updates (O(log
N)). Once the number of transactions got lower than the threshold, we
reset the max-heap.
The performance benchmark results showed significant speed up (more
than x30 speed up on my machine) in decoding a transaction with 100k
subtransactions, whereas there is no visible overhead in other cases.
Reviewed-by: Amit Kapila, Hayato Kuroda, Vignesh C, Ajin Cherian,
Tomas Vondra, Shubham Khanna, Peter Smith, Álvaro Herrera,
Euler Taveira
Discussion: https://postgr.es/m/CAD21AoAfKTgrBrLq96GcTv9d6k97zaQcDM-rxfKEt4GSe0qnaQ%40mail.gmail.com
Previously, binaryheap didn't support updating a key and removing a
node in an efficient way. For example, in order to remove a node from
the binaryheap, the caller had to pass the node's position within the
array that the binaryheap internally has. Removing a node from the
binaryheap is done in O(log n) but searching for the key's position is
done in O(n).
This commit adds a hash table to binaryheap in order to track the
position of each nodes in the binaryheap. That way, by using newly
added functions such as binaryheap_update_up() etc., both updating a
key and removing a node can be done in O(1) on an average and O(log n)
in worst case. This is known as the indexed binary heap. The caller
can specify to use the indexed binaryheap by passing indexed = true.
The current code does not use the new indexing logic, but it will be
used by an upcoming patch.
Reviewed-by: Vignesh C, Peter Smith, Hayato Kuroda, Ajin Cherian,
Tomas Vondra, Shubham Khanna
Discussion: https://postgr.es/m/CAD21AoDffo37RC-eUuyHJKVEr017V2YYDLyn1xF_00ofptWbkg%40mail.gmail.com
