tarballs under 100 characters. This should avoid failures with certain
untarring tools (WinZip and Midnight Commander have been mentioned as
likely suspects). Per my proposal of yesterday.
catversion bumped since the initial contents of pg_proc change.
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
that it can scribble on scan->xs_ctup.t_self while following HOT chains,
so we can't rely on that to stay valid between hashgettuple() calls.
Introduce a private variable in HashScanOpaque, instead.
hash indexes keep entries sorted by hash value. First, the original plans for
concurrency assumed that insertions would happen only at the end of a page,
which is no longer true; this could cause scans to transiently fail to find
index entries in the presence of concurrent insertions. We can compensate
by teaching scans to re-find their position after re-acquiring read locks.
Second, neither the bucket split nor the bucket compaction logic had been
fixed to preserve hashvalue ordering, so application of either of those
processes could lead to permanent corruption of an index, in the sense
that searches might fail to find entries that are present.
This patch fixes the split and compaction logic to preserve hashvalue
ordering, but it cannot do anything about pre-existing corruption. We will
need to recommend reindexing all hash indexes in the 8.4.2 release notes.
To buy back the performance loss hereby induced in split and compaction,
fix them to use PageIndexMultiDelete instead of retail PageIndexDelete
operations. We might later want to do something with qsort'ing the
page contents rather than doing a binary search for each insertion,
but that seemed more invasive than I cared to risk in a back-patch.
Per bug #5157 from Jeff Janes and subsequent investigation.
recent proposal. As proof of concept, remove knowledge of Params from the
core parser, arranging for them to be handled entirely by parser hook
functions. It turns out we need an additional hook for that --- I had
forgotten about the code that handles inferring a parameter's type from
context.
This is a preliminary step towards letting plpgsql handle its variables
through parser hooks. Additional work remains to be done to expose the
facility through SPI, but I think this is all the changes needed in the core
parser.
when FOR UPDATE is propagated down into a sub-select expanded from a view.
Similar bug to parser's isLockedRel issue that I fixed yesterday; likewise
seems not quite worth the effort to back-patch.
underneath the Limit node, not atop it. This fixes the old problem that such
a query might unexpectedly return fewer rows than the LIMIT says, due to
LockRows discarding updated rows.
There is a related problem that LockRows might destroy the sort ordering
produced by earlier steps; but fixing that by pushing LockRows below Sort
would create serious performance problems that are unjustified in many
real-world applications, as well as potential deadlock problems from locking
many more rows than expected. Instead, keep the present semantics of applying
FOR UPDATE after ORDER BY within a single query level; but allow the user to
specify the other way by writing FOR UPDATE in a sub-select. To make that
work, track whether FOR UPDATE appeared explicitly in sub-selects or got
pushed down from the parent, and don't flatten a sub-select that contained an
explicit FOR UPDATE.
for example in
WITH w AS (SELECT * FROM foo) SELECT * FROM w, bar ... FOR UPDATE
the FOR UPDATE will now affect bar but not foo. This is more useful and
consistent than the original 8.4 behavior, which tried to propagate FOR UPDATE
into the WITH query but always failed due to assorted implementation
restrictions. Even though we are in process of removing those restrictions,
it seems correct on philosophical grounds to not let the outer query's
FOR UPDATE affect the WITH query.
In passing, fix isLockedRel which frequently got things wrong in
nested-subquery cases: "FOR UPDATE OF foo" applies to an alias foo in the
current query level, not subqueries. This has been broken for a long time,
but it doesn't seem worth back-patching further than 8.4 because the actual
consequences are minimal. At worst the parser would sometimes get
RowShareLock on a relation when it should be AccessShareLock or vice versa.
That would only make a difference if someone were using ExclusiveLock
concurrently, which no standard operation does, and anyway FOR UPDATE
doesn't result in visible changes so it's not clear that the someone would
notice any problem. Between that and the fact that FOR UPDATE barely works
with subqueries at all in existing releases, I'm not excited about worrying
about it.
those accepted by date_in(). I confused julian day numbers and number of
days since the postgres epoch 2000-01-01 in the original patch.
I just noticed that it's still easy to get such out-of-range values into
the database using to_date or +- operators, but this patch doesn't do
anything about those functions.
Per report from James Pye.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
style by default. Per discussion, there seems to be hardly anything that
really relies on being able to change the regex flavor, so the ability to
select it via embedded options ought to be enough for any stragglers.
Also, if we didn't remove the GUC, we'd really be morally obligated to
mark the regex functions non-immutable, which'd possibly create performance
issues.
Per recent discussion, add_missing_from has been deprecated for long enough to
consider removing, and it's getting in the way of planned parser refactoring.
The system now always behaves as though add_missing_from were OFF.
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Itagaki Takahiro
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
Add a variant of pg_get_triggerdef with a second argument "pretty" that
causes the output to be formatted in the way pg_dump used to do. Use this
variant in pg_dump with server versions >= 8.5.
This insulates pg_dump from most future trigger feature additions, such as
the upcoming column triggers patch.
Author: Itagaki Takahiro <itagaki.takahiro@oss.ntt.co.jp>
friends). This code has all been ifdef'd out for many years, and doesn't
seem to have any prospect of becoming any more useful in the future.
EXPLAIN ANALYZE is what people use in practice, and I think if we did want
process-wide counters we'd be more likely to put in dtrace events for that
than try to resurrect this code. Get rid of it so as to have one less detail
to worry about while refactoring execMain.c.
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Catalog version bumped.
Partially revert the previous patch I installed and replace it with a more
general fix: any time a snapshot is pushed as Active, we need to ensure that it
will not be modified in the future. This means that if the same snapshot is
used as CurrentSnapshot, it needs to be copied separately. This affects
serializable transactions only, because CurrentSnapshot has already been copied
by RegisterSnapshot and so PushActiveSnapshot does not think it needs another
copy. However, CommandCounterIncrement would modify CurrentSnapshot, whereas
ActiveSnapshots must not have their command counters incremented.
I say "partially" because the regression test I added for the previous bug
has been kept.
(This restores 8.3 behavior, because before snapmgr.c existed, any snapshot set
as Active was copied.)
Per bug report from Stuart Bishop in
6bc73d4c0910042358k3d1adff3qa36f8df75198ecea@mail.gmail.com
inheritance parent tables are compared using equal(), instead of doing
strcmp() on the nodeToString representation. The old implementation was
always a tad cheesy, and it finally fails completely as of 8.4, now that the
node tree might contain syntax location information. equal() knows it's
supposed to ignore those fields, but strcmp() hardly can. Per recent
report from Scott Ribe.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
settings: avoid calling superuser() in contexts where it's not defined,
don't leak the transient copies of GetConfigOption output, and avoid the
whole exercise in postmaster child processes.
I found that actually no current caller of GetConfigOption has any use for
its internal check of GUC_SUPERUSER_ONLY. But rather than just remove
that entirely, it seemed better to add a parameter indicating whether to
enforce the check.
Per report from Simon and subsequent testing.
tuple size limit. Improve the error message for index-tuple-too-large
so that it includes the actual size, the limit, and the index name.
Sync with the btree occurrences of the same error.
Back-patch to 8.4 because it appears that the out-of-sync problem
is occurring in the field.
Teodor and Tom
The old coding was using a regular snapshot, referenced elsewhere, that was
subject to having its command counter updated. Fix by creating a private copy
of the snapshot exclusively for the cursor.
Backpatch to 8.4, which is when the bug was introduced during the snapshot
management rewrite.
TupleTableSlot nodes. This eliminates the need to count in advance
how many Slots will be needed, which seems more than worth the small
increase in the amount of palloc traffic during executor startup.
The ExecCountSlots infrastructure is now all dead code, but I'll remove it
in a separate commit for clarity.
Per a comment from Robert Haas.
the strings seen during the bootstrap run. There might have been some
actual point to doing that, many years ago, but as far as I can see the only
value now is to conserve a bit of memory. Even if we cared about wasting
a megabyte or so during the initdb run, it'd be far more effective to
arrange to release memory at the end of each BKI command, instead of
intentionally hanging onto strings that might never be used again.
Not maintaining the table probably makes it faster too; but the main point
of this patch is to get rid of a couple hundred lines of unnecessary and
rather crufty code.
hand-assigned rowtype OIDs, even when they are not "bootstrapped" catalogs
that have handmade type rows in pg_type.h. Give pg_database such an OID.
Restore the availability of C macros for the rowtype OIDs of the bootstrapped
catalogs. (These macros are now in the individual catalogs' .h files,
though, not in pg_type.h.)
This commit doesn't do anything especially useful by itself, but it's
necessary infrastructure for reverting some ill-considered changes in
relcache.c.
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
is unique and is not referenced above the join. In this case the inner
side doesn't affect the query result and can be thrown away entirely.
Although perhaps nobody would ever write such a thing by hand, it's
a reasonably common case in machine-generated SQL.
The current implementation only recognizes the case where the inner side
is a simple relation with a unique index matching the query conditions.
This is enough for the use-cases that have been shown so far, but we
might want to try to handle other cases later.
Robert Haas, somewhat rewritten by Tom
append_history(), if libreadline is new enough to have those functions
(they seem to be present at least since 4.2; but libedit may not have them).
This gives significantly saner behavior when two or more sessions overlap in
their use of the history file; although having two sessions exit at just the
same time is still perilous to your history. The behavior of \s remains
unchanged, ie, overwrite whatever was there.
Per bug #5052 from Marek Wójtowicz.
an explicit model of rescan costs being different from first-time costs.
The costing of Material nodes in particular now has some visible relationship
to the actual runtime behavior, where before it was essentially fantasy.
This also fixes up a couple of places where different materialized plan types
were treated differently for no very good reason (probably just oversights).
A couple of the regression tests are affected, because the planner now chooses
to put the other relation on the inside of a nestloop-with-materialize.
So far as I can see both changes are sane, and the planner is now more
consistently following the expectation that it should prefer to materialize
the smaller of two relations.
Per a recent discussion with Robert Haas.
Before, PL/Python converted data between SQL and Python by going
through a C string representation. This broke for bytea in two ways:
- On input (function parameters), you would get a Python string that
contains bytea's particular external representation with backslashes
etc., instead of a sequence of bytes, which is what you would expect
in a Python environment. This problem is exacerbated by the new
bytea output format.
- On output (function return value), null bytes in the Python string
would cause truncation before the data gets stored into a bytea
datum.
This is now fixed by converting directly between the PostgreSQL datum
and the Python representation.
The required generalized infrastructure also allows for other
improvements in passing:
- When returning a boolean value, the SQL datum is now true if and
only if Python considers the value that was passed out of the
PL/Python function to be true. Previously, this determination was
left to the boolean data type input function. So, now returning
'foo' results in true, because Python considers it true, rather than
false because PostgreSQL considers it false.
- On input, we can convert the integer and float types directly to
their Python equivalents without having to go through an
intermediate string representation.
original patch by Caleb Welton, with updates by myself
code was already okay with this, but the hack that obtained the output
column types of a recursive union in advance of doing real parse analysis
of the recursive union forgot to handle the case where there was an inner
WITH clause available to the non-recursive term. Best fix seems to be to
refactor so that we don't need the "throwaway" parse analysis step at all.
Instead, teach the transformSetOperationStmt code to set up the CTE's output
column information after it's processed the non-recursive term normally.
Per report from David Fetter.
build actually attempts to advertise itself via Bonjour. Formerly it always
did so, which meant that packagers had to decide for their users whether
this behavior was wanted or not. The default is "off" to be on the safe
side, though this represents a change in the default behavior of a
Bonjour-enabled build. Per discussion.
input functions don't accept either. While the backend can handle such
values fine, they can cause trouble in clients and in pg_dump/restore.
This is followup to the original issue on time datatype reported by Andrew
McNamara a while ago. Like that one, none of these seem worth
back-patching.
functions.
This extends the previous patch that forbade SETting these variables inside
security-definer functions. RESET is equally a security hole, since it
would allow regaining privileges of the caller; furthermore it can trigger
Assert failures and perhaps other internal errors, since the code is not
expecting these variables to change in such contexts. The previous patch
did not cover this case because assign hooks don't really have enough
information, so move the responsibility for preventing this into guc.c.
Problem discovered by Heikki Linnakangas.
Security: no CVE assigned yet, extends CVE-2007-6600
that's generated for a whole-row Var referencing the subquery, when the
subquery is in the nullable side of an outer join. The previous coding
instead put PlaceHolderVars around the elements of the RowExpr. The effect
was that when the outer join made the subquery outputs go to null, the
whole-row Var produced ROW(NULL,NULL,...) rather than just NULL. There
are arguments afoot about whether those things ought to be semantically
indistinguishable, but for the moment they are not entirely so, and the
planner needs to take care that its machinations preserve the difference.
Per bug #5025.
Making this feasible required refactoring ResolveNew() to allow more caller
control over what is substituted for a Var. I chose to make ResolveNew()
a wrapper around a new general-purpose function replace_rte_variables().
I also fixed the ancient bogosity that ResolveNew might fail to set
a query's hasSubLinks field after inserting a SubLink in it. Although
all current callers make sure that happens anyway, we've had bugs of that
sort before, and it seemed like a good time to install a proper solution.
Back-patch to 8.4. The problem can be demonstrated clear back to 8.0,
but the fix would be too invasive in earlier branches; not to mention
that people may be depending on the subtly-incorrect behavior. The
8.4 series is new enough that fixing this probably won't cause complaints,
but it might in older branches. Also, 8.4 shows the incorrect behavior
in more cases than older branches do, because it is able to flatten
subqueries in more cases.
own database's datfrozenxid, if the current value is old enough to be
forcing autovacuums or warning messages. This ensures that a bogus
value is replaced as soon as possible. Per a comment from Heikki.
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
