The computation of the column
information_schema.check_constraints.check_clause used
pg_get_constraintdef() plus some string manipulation to get the check
clause back out. This ended up with an extra pair of parentheses,
which is only an aesthetic problem, but also with suffixes like "NOT
VALID", which don't belong into that column. We can fix both of these
problems and simplify the code by just using pg_get_expr() instead.
Discussion: https://www.postgresql.org/message-id/799b59ef-3330-f0d2-ee23-8cdfa1740987@eisentraut.org
This commit introduces binaryheap_remove_node(), which can be used
to remove any node from a binary heap. The implementation is
straightforward. The target node is replaced with the last node in
the heap, and then we sift as needed to preserve the heap property.
This new function is intended for use in a follow-up commit that
will improve the performance of pg_restore.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
There are a couple of places in frontend code that could make use
of this simple binary heap implementation. This commit makes
binaryheap usable in frontend code, much like commit 26aaf97b68 did
for StringInfo. Like StringInfo, the header file is left in lib/
to reduce the likelihood of unnecessary breakage.
The frontend version of binaryheap exposes a void *-based API since
frontend code does not have access to the Datum definitions. This
seemed like a better approach than switching all existing uses to
void * or making the Datum definitions available to frontend code.
Reviewed-by: Tom Lane, Alvaro Herrera
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
It's entirely possible for a logical slot to have a confirmed_flush LSN
higher than the last value saved on disk while not being marked as dirty.
Currently, it is not a major problem but a later patch adding support for
the upgrade of slots relies on that value being properly flushed to disk.
It can also help avoid processing the same transactions again in some
boundary cases after the clean shutdown and restart. Say, we process
some transactions for which we didn't send anything downstream (the
changes got filtered) but the confirm_flush LSN is updated due to
keepalives. As we don't flush the latest value of confirm_flush LSN, it
may lead to processing the same changes again without this patch.
The approach taken by this patch has been suggested by Ashutosh Bapat.
Author: Vignesh C, Julien Rouhaud, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Michael Paquier, Ashutosh Bapat, Peter Smith, Hou Zhijie
Discussion: http://postgr.es/m/CAA4eK1JzJagMmb_E8D4au=GYQkxox0AfNBm1FbP7sy7t4YWXPQ@mail.gmail.com
Discussion: http://postgr.es/m/TYAPR01MB58664C81887B3AF2EB6B16E3F5939@TYAPR01MB5866.jpnprd01.prod.outlook.com
generation_counter includes time spent on both JIT:ing expressions
and tuple deforming which are configured independently via options
jit_expressions and jit_tuple_deforming. As they are combined in
the same counter it's not apparent what fraction of time the tuple
deforming takes.
This adds deform_counter dedicated to tuple deforming, which allows
seeing more directly the influence jit_tuple_deforming is having on
the query. The counter is exposed in EXPLAIN and pg_stat_statements
bumpin pg_stat_statements to 1.11.
Author: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20220612091253.eegstkufdsu4kfls@erthalion.local
We shouldn't be doing non-trivial work in signal handlers in general,
and in this case the handler could reach unsafe code and corrupt state.
It also clobbered its own "reason" code.
Move all recovery conflict decision logic into the next
CHECK_FOR_INTERRUPTS(), and have the signal handler just set flags and
the latch, following the standard pattern. Since there are several
different "reasons", use a separate flag for each.
With this refactoring, the recovery conflict system no longer
piggy-backs on top of the regular query cancelation mechanism, but
instead raises an error directly if it decides that is necessary. It
still needs to respect QueryCancelHoldoffCount, because otherwise the
FEBE protocol might get out of sync (see commit 2b3a8b20c2d).
This fixes one class of intermittent failure in the new
031_recovery_conflict.pl test added by commit 9f8a050f, though the buggy
coding is much older. Failures outside contrived testing seem to be
very rare (or perhaps incorrectly attributed) in the field, based on
lack of reports.
No back-patch for now due to complexity and release schedule. We have
the option to back-patch into 16 later, as 16 has prerequisite commit
bea3d7e.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Michael Paquier <michael@paquier.xyz> (earlier version)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Tested-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Discussion: https://postgr.es/m/CALj2ACVr8au2J_9D88UfRCi0JdWhyQDDxAcSVav0B0irx9nXEg%40mail.gmail.com
This commit allows specifying a --sync-method in several frontend
utilities that must synchronize many files to disk (initdb,
pg_basebackup, pg_checksums, pg_dump, pg_rewind, and pg_upgrade).
On Linux, users can specify "syncfs" to synchronize the relevant
file systems instead of calling fsync() for every single file. In
many cases, using syncfs() is much faster.
As with recovery_init_sync_method, this new option comes with some
caveats. The descriptions of these caveats have been moved to a
new appendix section in the documentation.
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier, Thomas Munro, Robert Haas, Justin Pryzby
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
This commit adds support for using syncfs() in fsync_pgdata() and
fsync_dir_recurse() (which have been renamed to sync_pgdata() and
sync_dir_recurse()). Like recovery_init_sync_method,
sync_pgdata() calls syncfs() for the data directory, each
tablespace, and pg_wal (if it is a symlink). For now, all of the
frontend utilities that use these support functions are hard-coded
to use fsync(), but a follow-up commit will allow specifying
syncfs().
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
This commit renames RecoveryInitSyncMethod to DataDirSyncMethod and
moves it to common/file_utils.h. This is preparatory work for a
follow-up commit that will allow specifying the synchronization
method in frontend utilities such as pg_upgrade and pg_basebackup.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZN2ZB4afQ2JbR9TA%40paquier.xyz
Presently, frontend code that needs to use these macros must either
include storage/fd.h, which declares several frontend-unsafe
functions, or duplicate the macros. This commit moves these macros
to common/file_utils.h, which is safe for both frontend and backend
code. Consequently, we can also remove the duplicated macros in
pg_checksums and stop including storage/fd.h in pg_rewind.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZOP5qoUualu5xl2Z%40paquier.xyz
Unlike the other pg_stat_get_backend* functions,
pg_stat_get_backend_subxact() looks up the backend entry by using
its integer argument as a 1-based index in an internal array. The
other functions look for the entry with the matching session
backend ID. These numbers often match, but that isn't reliably
true.
This commit resolves this discrepancy by introducing
pgstat_get_local_beentry_by_backend_id() and using it in
pg_stat_get_backend_subxact(). We cannot use
pgstat_get_beentry_by_backend_id() because it returns a
PgBackendStatus, which lacks the locally computed additions
available in LocalPgBackendStatus that are required by
pg_stat_get_backend_subxact().
Author: Ian Barwick
Reviewed-by: Sami Imseih, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/CAB8KJ%3Dj-ACb3H4L9a_b3ZG3iCYDW5aEu3WsPAzkm2S7JzS1Few%40mail.gmail.com
Backpatch-through: 16
Presently, pgstat_fetch_stat_beentry() accepts a session's backend
ID as its argument, and pgstat_fetch_stat_local_beentry() accepts a
1-based index in an internal array as its argument. The former is
typically used wherever a user must provide a backend ID, and the
latter is usually used internally when looping over all entries in
the array. This difference was first introduced by d7e39d72ca.
Before that commit, both functions accepted a 1-based index to the
internal array.
This commit renames these two functions to make it clear whether
they use the backend ID or the 1-based index to look up the entry.
This is preparatory work for a follow-up change that will introduce
a function for looking up a LocalPgBackendStatus using a backend
ID.
Reviewed-by: Ian Barwick, Sami Imseih, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/CAB8KJ%3Dj-ACb3H4L9a_b3ZG3iCYDW5aEu3WsPAzkm2S7JzS1Few%40mail.gmail.com
Backpatch-through: 16
The logical_replication_mode GUC is intended for testing and debugging
purposes, but its current name may be misleading and encourage users to make
unnecessary changes.
To avoid confusion, renaming the GUC to a less misleading name
debug_logical_replication_streaming that casual users are less likely to mistakenly
assume needs to be modified in a regular logical replication setup.
Author: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d672d774-c44b-6fec-f993-793e744f169a%40eisentraut.org
Make the primary messages more compact and make the detail messages
uniform. In initdb.c and pg_resetwal.c, use the newish
option_parse_int() to simplify some of the option parsing. For the
backend GUC wal_segment_size, add a GUC check hook to do the
verification instead of coding it in bootstrap.c. This might be
overkill, but that way the check is in the right place and it becomes
more self-documenting.
In passing, make pg_controldata use the logging API for warning
messages.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/9939aa8a-d7be-da2c-7715-0a0b5535a1f7@eisentraut.org
This commit switches query jumbling so as prepared statement names are
treated as constants in DeallocateStmt. A boolean field is added to
DeallocateStmt to make a distinction between ALL and named prepared
statements, as "name" was used to make this difference before, NULL
meaning DEALLOCATE ALL.
Prior to this commit, DEALLOCATE was not tracked in pg_stat_statements,
for the reason that it was not possible to treat its name parameter as a
constant. Now that query jumbling applies to all the utility nodes,
this reason does not apply anymore.
Like 638d42a3c520, this can be a huge advantage for monitoring where
prepared statement names are randomly generated, preventing bloat in
pg_stat_statements. A couple of tests are added to track the new
behavior.
Author: Dagfinn Ilmari Mannsåker, Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/ZMhT9kNtJJsHw6jK@paquier.xyz
We now create contype='n' pg_constraint rows for not-null constraints.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. We also spawn not-null constraints
for inheritance child tables when their parents have primary keys.
These related constraints mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations: for example, as opposed to CHECK constraints, we don't
match not-null ones by name when descending a hierarchy to alter it,
instead matching by column name that they apply to. This means we don't
require the constraint names to be identical across a hierarchy.
For now, we omit them for system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
psql shows these constraints in \d+.
pg_dump requires some ad-hoc hacks, particularly when dumping a primary
key. We now create one "throwaway" not-null constraint for each column
in the PK together with the CREATE TABLE command, and once the PK is
created, all those throwaway constraints are removed. This avoids
having to check each tuple for nullness when the dump restores the
primary key creation.
pg_upgrading from an older release requires a somewhat brittle procedure
to create a constraint state that matches what would be created if the
database were being created fresh in Postgres 17. I have tested all the
scenarios I could think of, and it works correctly as far as I can tell,
but I could have neglected weird cases.
This patch has been very long in the making. The first patch was
written by Bernd Helmle in 2010 to add a new pg_constraint.contype value
('n'), which I (Álvaro) then hijacked in 2011 and 2012, until that one
was killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again. During Postgres 16 this had
already been introduced by commit e056c557aef4, but there were some
problems mainly with the pg_upgrade procedure that couldn't be fixed in
reasonable time, so it was reverted.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring an additional pg_attribute column
to track the OID of the not-null constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Commit 2a8b40e36 introduces the worker type field for logical replication
workers, but forgot to reset the type when the worker exits. This can lead
to recognizing a stopped worker as a valid logical replication worker.
Fix it by resetting the worker type and additionally adding the safeguard
to not use LogicalRepWorker until ->in_use is verified.
Reported-by: Thomas Munro based on cfbot reports.
Author: Hou Zhijie, Alvaro Herrera
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/CA+hUKGK2RQh4LifVgBmkHsCYChP-65UwGXOmnCzYVa5aAt4GWg@mail.gmail.com
Revalidation of a plancache entry (after a cache invalidation event)
requires acquiring a snapshot. Normally that is harmless, but not
if the cached statement is one that needs to run without acquiring a
snapshot. We were already aware of that for TransactionStmts,
but for some reason hadn't extrapolated to the other statements that
PlannedStmtRequiresSnapshot() knows mustn't set a snapshot. This can
lead to unexpected failures of commands such as SET TRANSACTION
ISOLATION LEVEL. We can fix it in the same way, by excluding those
command types from revalidation.
However, we can do even better than that: there is no need to
revalidate for any statement type for which parse analysis, rewrite,
and plan steps do nothing interesting, which is nearly all utility
commands. To mechanize this, invent a parser function
stmt_requires_parse_analysis() that tells whether parse analysis does
anything beyond wrapping a CMD_UTILITY Query around the raw parse
tree. If that's what it does, then rewrite and plan will just
skip the Query, so that it is not possible for the same raw parse
tree to produce a different plan tree after cache invalidation.
stmt_requires_parse_analysis() is basically equivalent to the
existing function analyze_requires_snapshot(), except that for
obscure reasons that function omits ReturnStmt and CallStmt.
It is unclear whether those were oversights or intentional.
I have not been able to demonstrate a bug from not acquiring a
snapshot while analyzing these commands, but at best it seems mighty
fragile. It seems safer to acquire a snapshot for parse analysis of
these commands too, which allows making stmt_requires_parse_analysis
and analyze_requires_snapshot equivalent.
In passing this fixes a second bug, which is that ResetPlanCache
would exclude ReturnStmts and CallStmts from revalidation.
That's surely *not* safe, since they contain parsable expressions.
Per bug #18059 from Pavel Kulakov. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18059-79c692f036b25346@postgresql.org
This commit introduces functions for converting numbers to their
equivalent binary and octal representations. Also, the base
conversion code for these functions and to_hex() has been moved to
a common helper function.
Co-authored-by: Eric Radman
Reviewed-by: Ian Barwick, Dag Lem, Vignesh C, Tom Lane, Peter Eisentraut, Kirk Wolak, Vik Fearing, John Naylor, Dean Rasheed
Discussion: https://postgr.es/m/Y6IyTQQ/TsD5wnsH%40vm3.eradman.com
This commit introduces descriptively-named macros for the
identifiers used in wire protocol messages. These new macros are
placed in a new header file so that they can be easily used by
third-party code.
Author: Dave Cramer
Reviewed-by: Alvaro Herrera, Tatsuo Ishii, Peter Smith, Robert Haas, Tom Lane, Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/CADK3HHKbBmK-PKf1bPNFoMC%2BoBt%2BpD9PH8h5nvmBQskEHm-Ehw%40mail.gmail.com
Commit 31966b15 invented a way for functions dealing with relation
extension to accept a Relation in online code and an SMgrRelation in
recovery code. It seems highly likely that future bufmgr.c interfaces
will face the same problem, and need to do something similar.
Generalize the names so that each interface doesn't have to re-invent
the wheel.
Back-patch to 16. Since extension AM authors might start using the
constructor macros once 16 ships, we agreed to do the rename in 16
rather than waiting for 17.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2B6tLD2BhpRWycEoti6LVLyQq457UL4ticP5xd8LqHySA%40mail.gmail.com
This new view, wrapped around a SRF, shows some information known about
wait events, as of:
- Name.
- Type (Activity, I/O, Extension, etc.).
- Description.
All the information retrieved comes from wait_event_names.txt, and the
description is the same as the documentation with filters applied to
remove any XML markups. This view is useful when joined with
pg_stat_activity to get the description of a wait event reported.
Custom wait events for extensions are included in the view.
Original idea by Yves Colin.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Tom Lane, Michael
Paquier
Discussion: https://postgr.es/m/0e2ae164-dc89-03c3-cf7f-de86378053ac@gmail.com
The source code comment already said that the presence of the field
element_types.domain_default might be a bug in the standard, since it
never made sense there. Indeed, the field is gone in newer versions
of the standard. So just remove it.
Previously, if a specialized comparator found equal datum1 keys,
the "comparetup" function would repeat the comparison on the
datum before proceeding with the unabbreviated first key
and/or additional sort keys.
Move comparing additional sort keys into "tiebreak" functions so
that specialized comparators can call these directly if needed,
avoiding duplicate work.
Reviewed by David Rowley
Discussion: https://postgr.es/m/CAFBsxsGaVfUrjTghpf%3DkDBYY%3DjWx1PN-fuusVe7Vw5s0XqGdGw%40mail.gmail.com
This was disabled in commit 6f80a8d9c due to the lack of support for
handling of pseudoconstant quals assigned to replaced joins in
createplan.c. To re-allow it, this patch adds the support by 1)
modifying the ForeignPath and CustomPath structs so that if they
represent foreign and custom scans replacing a join with a scan, they
store the list of RestrictInfo nodes to apply to the join, as in
JoinPaths, and by 2) modifying create_scan_plan() in createplan.c so
that it uses that list in that case, instead of the baserestrictinfo
list, to get pseudoconstant quals assigned to the join, as mentioned in
the commit message for that commit.
Important item for the release notes: this is non-backwards-compatible
since it modifies the ForeignPath and CustomPath structs, as mentioned
above, and changes the argument lists for FDW helper functions
create_foreignscan_path(), create_foreign_join_path(), and
create_foreign_upper_path().
Richard Guo, with some additional changes by me, reviewed by Nishant
Sharma, Suraj Kharage, and Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
Commit b91dd9de was concerned with a theoretical problem with our
non-atomic condition variable operations. If you stop sleeping, and
then cancel the sleep in a separate step, you might be signaled in
between, and that could be lost. That doesn't matter for callers of
ConditionVariableBroadcast(), but callers of ConditionVariableSignal()
might be upset if a signal went missing like this.
Commit bc971f4025c interacted badly with that logic, because it doesn't
use ConditionVariableSleep(), which would normally put us back in the
wait list. ConditionVariableCancelSleep() would be confused and think
we'd received an extra signal, and try to forward it to another backend,
resulting in wakeup storms.
New idea: ConditionVariableCancelSleep() can just return true if we've
been signaled. Hypothetical users of ConditionVariableSignal() would
then still have a way to deal with rare lost signals if they are
concerned about that problem.
Back-patch to 16, where bc971f4025c arrived.
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/2840876b-4cfe-240f-0a7e-29ffd66711e7%40enterprisedb.com
The new relation extension logic, introduced in 00d1e02be24, could lead to
slowdowns in some scenarios. E.g., when loading narrow rows into a table using
COPY, the caller of RelationGetBufferForTuple() will only request a small
number of pages. Without concurrency, we just extended using pwritev() in that
case. However, if there is *some* concurrency, we switched between extending
by a small number of pages and a larger number of pages, depending on the
number of waiters for the relation extension logic. However, some
filesystems, XFS in particular, do not perform well when switching between
extending files using fallocate() and pwritev().
To avoid that issue, remember the number of prior relation extensions in
BulkInsertState and extend more aggressively if there were prior relation
extensions. That not just avoids the aforementioned slowdown, but also leads
to noticeable performance gains in other situations, primarily due to
extending more aggressively when there is no concurrency. I should have done
it this way from the get go.
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAD21AoDvDmUQeJtZrau1ovnT_smN940=Kp6mszNGK3bq9yRN6g@mail.gmail.com
Backpatch: 16-, where the new relation extension code was added
Currently, the names of the custom wait event must be registered for
each backend, requiring all these to link to the shared memory area of
an extension, even if these are not loaded with
shared_preload_libraries.
This patch relaxes the constraints related to this infrastructure by
storing the wait events and their names in two dynamic hash tables in
shared memory. This has the advantage to simplify the registration of
custom wait events to a single routine call that returns an event ID
ready for consumption:
uint32 WaitEventExtensionNew(const char *wait_event_name);
The caller of this routine can then cache locally the ID returned, to be
used for pgstat_report_wait_start(), WaitLatch() or a similar routine.
The implementation uses two hash tables: one with a key based on the
event name to avoid duplicates and a second using the event ID as key
for event lookups, like on pg_stat_activity. These tables can hold a
minimum of 16 entries, and a maximum of 128 entries, which should be plenty
enough.
The code changes done in worker_spi show how things are simplified (most
of the code removed in this commit comes from there):
- worker_spi_init() is gone.
- No more shared memory hooks required (size requested and
initialization).
- The custom wait event ID is cached in the process that needs to set
it, with one single call to WaitEventExtensionNew() to retrieve it.
Per suggestion from Andres Freund.
Author: Masahiro Ikeda, with a few tweaks from me.
Discussion: https://postgr.es/m/20230801032349.aaiuvhtrcvvcwzcx@awork3.anarazel.de
We deduce a LogicalRepWorker's type from the values of several different
fields ('relid' and 'leader_pid') whenever logic needs to know it.
In fact, the logical replication worker type is already known at the time
of launching the LogicalRepWorker and it never changes for the lifetime of
that process. Instead of deducing the type, it is simpler to just store it
one time, and access it directly thereafter.
Author: Peter Smith
Reviewed-by: Amit Kapila, Bharath Rupireddy
Discussion: http://postgr.es/m/CAHut+PttPSuP0yoZ=9zLDXKqTJ=d0bhxwKaEaNcaym1XqcvDEg@mail.gmail.com
This relies on the "location" field added to TransactionStmt in 31de7e6,
now applied to the "gid" field used by 2PC commands. These commands are
now reported like:
COMMIT PREPARED $1
PREPARE TRANSACTION $1
ROLLBACK PREPARED $1
Applying constants for these commands is a huge advantage for workloads
that rely a lot on 2PC commands with different GIDs. Some tests are
added to track the new behavior.
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/ZMhT9kNtJJsHw6jK@paquier.xyz
Store function config settings in lists to avoid the need to parse and
allocate for each function execution.
Speedup is modest but significant. Additionally, this change also
seems cleaner and supports some other performance improvements under
discussion.
Discussion: https://postgr.es/m/04c8592dbd694e4114a3ed87139a7a04e4363030.camel@j-davis.com
Reviewed-by: Nathan Bossart
Commit 19d8e2308bc5 changed the list of set-of-columns that can be
returned by RelationGetIndexAttrBitmap, but didn't update its
"documentation". That was pretty hard to read already, so rewrite to
make it more comprehensible, adding the missing values while at it.
Backpatch to 16, like that commit.
Discussion: https://postgr.es/m/20230809091155.7c7f3gttjk3dj4ze@alvherre.pgsql
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
As with the Intel and Arm CRC instructions, compiler intrinsics for
them must be supported by the compiler. In contrast, no runtime check
is needed. Aligned memory access is faster, so use the Arm coding as
a model.
YANG Xudong
Discussion: https://postgr.es/m/b522a0c5-e3b2-99cc-6387-58134fb88cbe%40ymatrix.cn
If we define ZLIB_CONST before including zlib.h, zlib augments some
interfaces with const decorations. By doing that we can keep our own
interfaces cleaner and can remove some unconstify calls.
ZLIB_CONST was introduced in zlib 1.2.5.2 (17 Dec 2011). When
compiling with older zlib releases, you might now get compiler
warnings about discarding qualifiers.
CentOS 6 has zlib 1.2.3, but in 8e278b6576, we removed support for the
OpenSSL release in CentOS 6, so it seems ok to de-support the zlib
release in CentOS 6 as well.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://www.postgresql.org/message-id/flat/33462926-bb1e-7cc9-8d92-d86318e8ed1d%40eisentraut.org
Here we adjust the costs for WindowAggs so that they properly take into
account how much of their subnode they must read before outputting the
first row. Without this, we always assumed that the startup cost for the
WindowAgg was not much more expensive than the startup cost of its
subnode, however, that's going to be completely wrong in many cases. The
WindowAgg may have to read *all* of its subnode to output a single row
with certain window bound options.
Here we estimate how many rows we'll need to read from the WindowAgg's
subnode and proportionally add more of the subnode's run costs onto the
WindowAgg's startup costs according to how much of it we expect to have to
read in order to produce the first WindowAgg row.
The reason this is more important than we might have initially thought is
that we may end up making use of a path from the lower planner that works
well as a cheap startup plan when the query has a LIMIT clause, however,
the WindowAgg might mean we need to read far more rows than what the LIMIT
specifies.
No backpatch on this so as not to cause plan changes in released
versions.
Bug: #17862
Reported-by: Tim Palmer
Author: David Rowley
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/17862-1ab8f74b0f7b0611@postgresql.org
Discussion: https://postgr.es/m/CAApHDvrB0S5BMv+0-wTTqWFE-BJ0noWqTnDu9QQfjZ2VSpLv_g@mail.gmail.com
