This fixes a set of race conditions with cumulative statistics where a
shared stats entry could be dropped while it should still be valid in
the event when it is reused: an entry may refer to a different object
but requires the same hash key. This can happen with various stats
kinds, like:
- Replication slots that compute internally an index number, for
different slot names.
- Stats kinds that use an OID in the object key, where a wraparound
causes the same key to be used if an OID is used for the same object.
- As of PostgreSQL 18, custom pgstats kinds could also be an issue,
depending on their implementation.
This issue is fixed by introducing a counter called "generation" in the
shared entries via PgStatShared_HashEntry, initialized at 0 when an
entry is created and incremented when the same entry is reused, to avoid
concurrent issues on drop because of other backends still holding a
reference to it. This "generation" is copied to the local copy that a
backend holds when looking at an object, then cross-checked with the
shared entry to make sure that the entry is not dropped even if its
"refcount" justifies that if it has been reused.
This problem could show up when a backend shuts down and needs to
discard any entries it still holds, causing statistics to be removed
when they should not, or even an assertion failure. Another report
involved a failure in a standby after an OID wraparound, where the
startup process would FATAL on a "can only drop stats once", stopping
recovery abruptly. The buildfarm has been sporadically complaining
about the problem, as well, but the window is hard to reach with the
in-core tests.
Note that the issue can be reproduced easily by adding a sleep before
dshash_find() in pgstat_release_entry_ref() to enlarge the problematic
window while repeating test_decoding's isolation test oldest_xmin a
couple of times, for example, as pointed out by Alexander Lakhin.
Reported-by: Alexander Lakhin, Peter Smith
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/CAA4eK1KxuMVyAryz_Vk5yq3ejgKYcL6F45Hj9ZnMNBS-g+PuZg@mail.gmail.com
Discussion: https://postgr.es/m/17947-b9554521ad963c9c@postgresql.org
Backpatch-through: 15
This reverts commit 95c5acb3fc261067ab65ddc0b2dca8e162f09442 (v17) and
counterparts in each other non-master branch. If released, that commit
would have caused a worst-in-years minor release regression, via
undetected LWLock self-deadlock. This commit and its self-deadlock fix
warrant more bake time in the master branch.
Reported by Alexander Lakhin.
Discussion: https://postgr.es/m/10ec0bc3-5933-1189-6bb8-5dec4114558e@gmail.com
The inplace update survives ROLLBACK. The inval didn't, so another
backend's DDL could then update the row without incorporating the
inplace update. In the test this fixes, a mix of CREATE INDEX and ALTER
TABLE resulted in a table with an index, yet relhasindex=f. That is a
source of index corruption. Back-patch to v12 (all supported versions).
The back branch versions don't change WAL, because those branches just
added end-of-recovery SIResetAll(). All branches change the ABI of
extern function PrepareToInvalidateCacheTuple(). No PGXN extension
calls that, and there's no apparent use case in extensions.
Reviewed by Nitin Motiani and (in earlier versions) Andres Freund.
Discussion: https://postgr.es/m/20240523000548.58.nmisch@google.com
The previous commit fixed some ways of losing an inplace update. It
remained possible to lose one when a backend working toward a
heap_update() copied a tuple into memory just before inplace update of
that tuple. In catalogs eligible for inplace update, use LOCKTAG_TUPLE
to govern admission to the steps of copying an old tuple, modifying it,
and issuing heap_update(). This includes MERGE commands. To avoid
changing most of the pg_class DDL, don't require LOCKTAG_TUPLE when
holding a relation lock sufficient to exclude inplace updaters.
Back-patch to v12 (all supported versions). In v13 and v12, "UPDATE
pg_class" or "UPDATE pg_database" can still lose an inplace update. The
v14+ UPDATE fix needs commit 86dc90056dfdbd9d1b891718d2e5614e3e432f35,
and it wasn't worth reimplementing that fix without such infrastructure.
Reviewed by Nitin Motiani and (in earlier versions) Heikki Linnakangas.
Discussion: https://postgr.es/m/20231027214946.79.nmisch@google.com
This commit reverts 1adf16b8fb, 87c21bb941, and subsequent fixes and
improvements including df64c81ca9, c99ef1811a, 9dfcac8e15, 885742b9f8,
842c9b2705, fcf80c5d5f, 96c7381c4c, f4fc7cb54b, 60ae37a8bc, 259c96fa8f,
449cdcd486, 3ca43dbbb6, 2a679ae94e, 3a82c689fd, fbd4321fd5, d53a4286d7,
c086896625, 4e5d6c4091, 04158e7fa3.
The reason for reverting is security issues related to repeatable name lookups
(CVE-2014-0062). Even though 04158e7fa3 solved part of the problem, there
are still remaining issues, which aren't feasible to even carefully analyze
before the RC deadline.
Reported-by: Noah Misch, Robert Haas
Discussion: https://postgr.es/m/20240808171351.a9.nmisch%40google.com
Backpatch-through: 17
We advance origin progress during abort on successful streaming and
application of ROLLBACK in parallel streaming mode. But the origin
shouldn't be advanced during an error or unsuccessful apply due to
shutdown. Otherwise, it will result in a transaction loss as such a
transaction won't be sent again by the server.
Reported-by: Hou Zhijie
Author: Hayato Kuroda and Shveta Malik
Reviewed-by: Amit Kapila
Backpatch-through: 16
Discussion: https://postgr.es/m/TYAPR01MB5692FAC23BE40C69DA8ED4AFF5B92@TYAPR01MB5692.jpnprd01.prod.outlook.com
The code intends to allow GUCs to be set within parallel workers
via function SET clauses, but not otherwise. However, doing so fails
for "session_authorization" and "role", because the assign hooks for
those attempt to set the subsidiary "is_superuser" GUC, and that call
falls foul of the "not otherwise" prohibition. We can't switch to
using GUC_ACTION_SAVE for this, so instead add a new GUC variable
flag GUC_ALLOW_IN_PARALLEL to mark is_superuser as being safe to set
anyway. (This is okay because is_superuser has context PGC_INTERNAL
and thus only hard-wired calls can change it. We'd need more thought
before applying the flag to other GUCs; but maybe there are other
use-cases.) This isn't the prettiest fix perhaps, but other
alternatives we thought of would be much more invasive.
While here, correct a thinko in commit 059de3ca4: when rejecting
a GUC setting within a parallel worker, we should return 0 not -1
if the ereport doesn't longjmp. (This seems to have no consequences
right now because no caller cares, but it's inconsistent.) Improve
the comments to try to forestall future confusion of the same kind.
Despite the lack of field complaints, this seems worth back-patching.
Thanks to Nathan Bossart for the idea to invent a new flag,
and for review.
Discussion: https://postgr.es/m/2833457.1723229039@sss.pgh.pa.us
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
Commit 86db52a506 changed the locking of injection points to use only
atomic ops and spinlocks, to make it possible to define injection
points in processes that don't have a PGPROC entry (yet). However, it
didn't work in EXEC_BACKEND mode, because the pointer to shared memory
area was not initialized until the process "attaches" to all the
shared memory structs. To fix, pass the pointer to the child process
along with other global variables that need to be set up early.
Backpatch-through: 17
The standby_slot_names GUC allows the specification of physical standby
slots that must be synchronized before the logical walsenders associated
with logical failover slots. However, for this purpose, the GUC name is
too generic.
Author: Hou Zhijie
Reviewed-by: Bertrand Drouvot, Masahiko Sawada
Backpatch-through: 17
Discussion: https://postgr.es/m/ZnWeUgdHong93fQN@momjian.us
Instead of looking up casts at parse time for converting the result
of JsonPath* query functions to the specified or the default
RETURNING type, always perform the conversion at runtime using either
the target type's input function or the function
json_populate_type().
There are two motivations for this change:
1. json_populate_type() coerces to types with typmod such that any
string values that exceed length limit cause an error instead of
silent truncation, which is necessary to be standard-conforming.
2. It was possible to end up with a cast expression that doesn't
support soft handling of errors causing bugs in the of handling
ON ERROR clause.
JsonExpr.coercion_expr which would store the cast expression is no
longer necessary, so remove.
Bump catversion because stored rules change because of the above
removal.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: Discussion: https://postgr.es/m/202405271326.5a5rprki64aw%40alvherre.pgsql
Previously, GetJsonPathVar() allowed a jsonpath expression to
reference any prefix of a PASSING variable's name. For example, the
following query would incorrectly work:
SELECT JSON_QUERY(context_item, jsonpath '$xy' PASSING val AS xyz);
The fix ensures that the length of the variable name mentioned in a
jsonpath expression matches exactly with the name of the PASSING
variable before comparing the strings using strncmp().
Reported-by: Alvaro Herrera (off-list)
Discussion: https://postgr.es/m/CA+HiwqFGkLWMvELBH6E4SQ45qUHthgcRH6gCJL20OsYDRtFx_w@mail.gmail.com
Commit 534287403 invented SHARED_DEPENDENCY_INITACL entries in
pg_shdepend, but installed them only for non-owner roles mentioned
in a pg_init_privs entry. This turns out to be the wrong thing,
because there is nothing to cue REASSIGN OWNED to go and update
pg_init_privs entries when the object's ownership is reassigned.
That leads to leaving dangling entries in pg_init_privs, as
reported by Hannu Krosing. Instead, install INITACL entries for
all roles mentioned in pg_init_privs entries (except pinned roles),
and change ALTER OWNER to not touch them, just as it doesn't
touch pg_init_privs entries.
REASSIGN OWNED will now substitute the new owner OID for the old
in pg_init_privs entries. This feels like perhaps not quite the
right thing, since pg_init_privs ought to be a historical record
of the state of affairs just after CREATE EXTENSION. However,
it's hard to see what else to do, if we don't want to disallow
dropping the object's original owner. In any case this is
better than the previous do-nothing behavior, and we're unlikely
to come up with a superior solution in time for v17.
While here, tighten up some coding rules about how ACLs in
pg_init_privs should never be null or empty. There's not any
obvious reason to allow that, and perhaps asserting that it's
not so will catch some bugs. (We were previously inconsistent
on the point, with some code paths taking care not to store
empty ACLs and others not.)
This leaves recordExtensionInitPrivWorker not doing anything
with its ownerId argument, but we'll deal with that separately.
catversion bump forced because of change of expected contents
of pg_shdepend when pg_init_privs entries exist.
Discussion: https://postgr.es/m/CAMT0RQSVgv48G5GArUvOVhottWqZLrvC5wBzBa4HrUdXe9VRXw@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced during Postgres 17 development.
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
This commit was written with help from clang-tidy, by mechanically
applying the same rules as similar clean-up commits (the earliest such
commit was commit 035ce1fe).
This enum was used to determine the first ID to use when assigning a
custom wait event for extensions, which is always 1. It was kept so
as it would be possible to add new in-core wait events in the category
"Extension". There is no such thing currently, so let's remove this
enum until a case justifying it pops up. This makes the code simpler
and easier to understand.
This has as effect to switch back autoprewarm.c to use PG_WAIT_EXTENSION
rather than WAIT_EVENT_EXTENSION, on par with v16 and older stable
branches.
Thinko in c9af05465307.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/195c6c45-abce-4331-be6a-e87724e1d060@eisentraut.org
This commit extends the backend-side infrastructure of injection points
so as it becomes possible to register some input data when attaching a
point. This private data can be registered with the function name and
the library name of the callback when attaching a point, then it is
given as input argument to the callback. This gives the possibility for
modules to pass down custom data at runtime when attaching a point
without managing that internally, in a manner consistent with the
callback entry retrieved from the hash shmem table storing the injection
point data.
InjectionPointAttach() gains two arguments, to be able to define the
private data contents and its size.
A follow-up commit will rely on this infrastructure to close a race
condition with the injection point detach in the module
injection_points.
While on it, this changes InjectionPointDetach() to return a boolean,
returning false if a point cannot be detached. This has been mentioned
by Noah as useful when it comes to implement more complex tests with
concurrent point detach, solid with the automatic detach done for local
points in the test module.
Documentation is adjusted in consequence.
Per discussion with Noah Misch.
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/20240509031553.47@rfd.leadboat.com
If an ACL recorded in pg_init_privs mentions a non-pinned role,
that reference must also be noted in pg_shdepend so that we know
that the role can't go away without removing the ACL reference.
Otherwise, DROP ROLE could succeed and leave dangling entries
behind, which is what's causing the recent upgrade-check failures
on buildfarm member copperhead.
This has been wrong since pg_init_privs was introduced, but it's
escaped notice because typical pg_init_privs entries would only
mention the bootstrap superuser (pinned) or at worst the owner
of the extension (who can't go away before the extension does).
We lack even a representation of such a role reference for
pg_shdepend. My first thought for a solution was entries listing
pg_init_privs in classid, but that doesn't work because then there's
noplace to put the granted-on object's classid. Rather than adding
a new column to pg_shdepend, let's add a new deptype code
SHARED_DEPENDENCY_INITACL. Much of the associated boilerplate
code can be cribbed from code for SHARED_DEPENDENCY_ACL.
A lot of the bulk of this patch just stems from the new need to pass
the object's owner ID to recordExtensionInitPriv, so that we can
consult it while updating pg_shdepend. While many callers have that
at hand already, a few places now need to fetch the owner ID of an
arbitrary privilege-bearing object. For that, we assume that there
is a catcache on the relevant catalog's OID column, which is an
assumption already made in ExecGrant_common so it seems okay here.
We do need an entirely new routine RemoveRoleFromInitPriv to perform
cleanup of pg_init_privs ACLs during DROP OWNED BY. It's analogous
to RemoveRoleFromObjectACL, but we can't share logic because that
function operates by building a command parsetree and invoking
existing GRANT/REVOKE infrastructure. There is of course no SQL
command that would update pg_init_privs entries when we're not in
process of creating their extension, so we need a routine that can
do the updates directly.
catversion bump because this changes the expected contents of
pg_shdepend. For the same reason, there's no hope of back-patching
this, even though it fixes a longstanding bug. Fortunately, the
case where it's a problem seems to be near nonexistent in the field.
If it weren't for the buildfarm breakage, I'd have been content to
leave this for v18.
Patch by me; thanks to Daniel Gustafsson for review and discussion.
Discussion: https://postgr.es/m/1745535.1712358659@sss.pgh.pa.us
This addresses some post-commit review comments for commits 6185c973,
de3600452, and 9425c596a0, with the following changes:
* Fix JSON_TABLE() syntax documentation to use the term
"path_expression" for JSON path expressions instead of
"json_path_specification" to be consistent with the other SQL/JSON
functions.
* Fix a typo in the example code in JSON_TABLE() documentation.
* Rewrite some newly added comments in jsonpath.h.
* In JsonPathQuery(), add missing cast to int before printing an enum
value.
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxG_e0QLCgaELrr2ZNz7AxPeGCNKAORe3fHtFCQLsH4J4Q@mail.gmail.com
This improves some error messages emitted by SQL/JSON query functions
by mentioning column name when available, such as when they are
invoked as part of evaluating JSON_TABLE() columns. To do so, a new
field column_name is added to both JsonFuncExpr and JsonExpr that is
only populated when creating those nodes for transformed JSON_TABLE()
columns.
While at it, relevant error messages are reworded for clarity.
Reported-by: Jian He <jian.universality@gmail.com>
Suggested-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxG_e0QLCgaELrr2ZNz7AxPeGCNKAORe3fHtFCQLsH4J4Q@mail.gmail.com
GlobalVisTestNonRemovableHorizon() was only used for the implementation of
snapshot_too_old, which was removed in f691f5b80a8. As using
GlobalVisTestNonRemovableHorizon() is not particularly efficient, no new uses
for it should be added. Therefore remove.
Discussion: https://postgr.es/m/20240415185720.q4dg4dlcyvvrabz4@awork3.anarazel.de
When matching constraints in AttachPartitionEnsureIndexes() we weren't
testing the constraint type, which could make a UNIQUE key lacking a
not-null constraint incorrectly satisfy a primary key requirement. Fix
this by testing that the constraint types match. (Other possible
mismatches are verified by comparing index properties.)
Discussion: https://postgr.es/m/202402051447.wimb4xmtiiyb@alvherre.pgsql
Let table AM define custom reloptions for its tables. This allows specifying
AM-specific parameters by the WITH clause when creating a table.
The reloptions, which could be used outside of table AM, are now extracted
into the CommonRdOptions data structure. These options could be by decision
of table AM directly specified by a user or calculated in some way.
The new test module test_tam_options evaluates the ability to set up custom
reloptions and calculate fields of CommonRdOptions on their base.
The code may use some parts from prior work by Hao Wu.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Discussion: https://postgr.es/m/AMUA1wBBBxfc3tKRLLdU64rb.1.1683276279979.Hmail.wuhao%40hashdata.cn
Reviewed-by: Reviewed-by: Pavel Borisov, Matthias van de Meent, Jess Davis
29f6a959c added a bump allocator type for efficient compact allocations.
Here we make use of this for non-bounded tuplesorts to store tuples.
This is very space efficient when storing narrow tuples due to bump.c
not having chunk headers. This means we can fit more tuples in work_mem
before spilling to disk, or perform an in-memory sort touching fewer
cacheline.
Author: David Rowley
Reviewed-by: Nathan Bossart
Reviewed-by: Matthias van de Meent
Reviewed-by: Tomas Vondra
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
This introduces a bump MemoryContext type. The bump context is best
suited for short-lived memory contexts which require only allocations
of memory and never a pfree or repalloc, which are unsupported.
Memory palloc'd into a bump context has no chunk header. This makes
bump a useful context type when lots of small allocations need to be
done without any need to pfree those allocations. Allocation sizes are
rounded up to the next MAXALIGN boundary, so with this and no chunk
header, allocations are very compact indeed.
Allocations are also very fast as bump does not check any freelists to
try and make use of previously free'd chunks. It just checks if there
is enough room on the current block, and if so it bumps the freeptr
beyond this chunk and returns the value that the freeptr was previously
pointing to. Simple and fast. A new block is malloc'd when there's not
enough space in the current block.
Code using the bump allocator must take care never to call any functions
which could try to call realloc() (or variants), pfree(),
GetMemoryChunkContext() or GetMemoryChunkSpace() on a bump allocated
chunk. Due to lack of chunk headers, these operations are unsupported.
To increase the chances of catching such issues, when compiled with
MEMORY_CONTEXT_CHECKING, bump allocated chunks are given a header and
any attempt to perform an unsupported operation will result in an ERROR.
Without MEMORY_CONTEXT_CHECKING, code attempting an unsupported
operation could result in a segfault.
A follow-on commit will implement the first user of bump.
Author: David Rowley
Reviewed-by: Nathan Bossart
Reviewed-by: Matthias van de Meent
Reviewed-by: Tomas Vondra
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
Reserve 4 bits for MemoryContextMethodID rather than 3. 3 bits did
technically allow a maximum of 8 memory context types, however, we've
opted to reserve some bit patterns which left us with only 4 slots, all
of which were used.
Here we add another bit which frees up 8 slots for future memory context
types.
In passing, adjust the enum names in MemoryContextMethodID to make it
more clear which ones can be used and which ones are reserved.
Author: Matthias van de Meent, David Rowley
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
This new DDL command splits a single partition into several parititions.
Just like ALTER TABLE ... MERGE PARTITIONS ... command, new patitions are
created using createPartitionTable() function with parent partition as the
template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
Commit 9e8da0f7 taught nbtree to handle ScalarArrayOpExpr quals
natively. This works by pushing down the full context (the array keys)
to the nbtree index AM, enabling it to execute multiple primitive index
scans that the planner treats as one continuous index scan/index path.
This earlier enhancement enabled nbtree ScalarArrayOp index-only scans.
It also allowed scans with ScalarArrayOp quals to return ordered results
(with some notable restrictions, described further down).
Take this general approach a lot further: teach nbtree SAOP index scans
to decide how to execute ScalarArrayOp scans (when and where to start
the next primitive index scan) based on physical index characteristics.
This can be far more efficient. All SAOP scans will now reliably avoid
duplicative leaf page accesses (just like any other nbtree index scan).
SAOP scans whose array keys are naturally clustered together now require
far fewer index descents, since we'll reliably avoid starting a new
primitive scan just to get to a later offset from the same leaf page.
The scan's arrays now advance using binary searches for the array
element that best matches the next tuple's attribute value. Required
scan key arrays (i.e. arrays from scan keys that can terminate the scan)
ratchet forward in lockstep with the index scan. Non-required arrays
(i.e. arrays from scan keys that can only exclude non-matching tuples)
"advance" without the process ever rolling over to a higher-order array.
Naturally, only required SAOP scan keys trigger skipping over leaf pages
(non-required arrays cannot safely end or start primitive index scans).
Consequently, even index scans of a composite index with a high-order
inequality scan key (which we'll mark required) and a low-order SAOP
scan key (which we won't mark required) now avoid repeating leaf page
accesses -- that benefit isn't limited to simpler equality-only cases.
In general, all nbtree index scans now output tuples as if they were one
continuous index scan -- even scans that mix a high-order inequality
with lower-order SAOP equalities reliably output tuples in index order.
This allows us to remove a couple of special cases that were applied
when building index paths with SAOP clauses during planning.
Bugfix commit 807a40c5 taught the planner to avoid generating unsafe
path keys: path keys on a multicolumn index path, with a SAOP clause on
any attribute beyond the first/most significant attribute. These cases
are now all safe, so we go back to generating path keys without regard
for the presence of SAOP clauses (just like with any other clause type).
Affected queries can now exploit scan output order in all the usual ways
(e.g., certain "ORDER BY ... LIMIT n" queries can now terminate early).
Also undo changes from follow-up bugfix commit a4523c5a, which taught
the planner to produce alternative index paths, with path keys, but
without low-order SAOP index quals (filter quals were used instead).
We'll no longer generate these alternative paths, since they can no
longer offer any meaningful advantages over standard index qual paths.
Affected queries thereby avoid all of the disadvantages that come from
using filter quals within index scan nodes. They can avoid extra heap
page accesses from using filter quals to exclude non-matching tuples
(index quals will never have that problem). They can also skip over
irrelevant sections of the index in more cases (though only when nbtree
determines that starting another primitive scan actually makes sense).
There is a theoretical risk that removing restrictions on SAOP index
paths from the planner will break compatibility with amcanorder-based
index AMs maintained as extensions. Such an index AM could have the
same limitations around ordered SAOP scans as nbtree had up until now.
Adding a pro forma incompatibility item about the issue to the Postgres
17 release notes seems like a good idea.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wz=ksvN_sjcnD1+Bt-WtifRA5ok48aDYnq3pkKhxgMQpcw@mail.gmail.com
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737cf4 are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This is marked PGC_SIGHUP, so it can only be set in a configuration
file, not anywhere else; and it is also marked GUC_DISALLOW_IN_AUTO_FILE,
so it can't be set using ALTER SYSTEM. When set to false, the
ALTER SYSTEM command is disallowed.
There was considerable concern that this would be misinterpreted as
a security feature, which it is not, because a determined superuser
has various ways of bypassing it. Hence, a lot of work has gone into
wordsmithing the documentation, in the hopes of avoiding any such
confusion.
Jelte Fennemia-Nio and Gabriele Bartolini, with wording suggestions
for the documentation from many others.
Discussion: http://postgr.es/m/CA%2BVUV5rEKt2%2BCdC_KUaPoihMu%2Bi5ChT4WVNTr4CD5-xXZUfuQw%40mail.gmail.com
The user-facing name is "Other Platforms and Clients", but the
internal name seems too focused on clients specifically, especially
given the plan to add a new setting to this session that is about
platform or deployment model compatibility rather than client
compatibility.
Jelte Fennema-Nio
Discussion: http://postgr.es/m/CAGECzQTfMbDiM6W3av+3weSnHxJvPmuTEcjxVvSt91sQBdOxuQ@mail.gmail.com
This adds 3 new variants of the random() function:
random(min integer, max integer) returns integer
random(min bigint, max bigint) returns bigint
random(min numeric, max numeric) returns numeric
Each returns a random number x in the range min <= x <= max.
For the numeric function, the number of digits after the decimal point
is equal to the number of digits that "min" or "max" has after the
decimal point, whichever has more.
The main entry points for these functions are in a new C source file.
The existing random(), random_normal(), and setseed() functions are
moved there too, so that they can all share the same PRNG state, which
is kept private to that file.
Dean Rasheed, reviewed by Jian He, David Zhang, Aleksander Alekseev,
and Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCV89Vxuq93xQdmc0t-0Y2zeeNQTdsjbmV7dyFBPykbV4Q@mail.gmail.com
Previously, the DSA segment size always started with 1MB and grew up
to DSA_MAX_SEGMENT_SIZE. It was inconvenient in certain scenarios,
such as when the caller desired a soft constraint on the total DSA
segment size, limiting it to less than 1MB.
This commit introduces the capability to specify the initial and
maximum DSA segment sizes when creating a DSA area, providing more
flexibility and control over memory usage.
Reviewed-by: John Naylor, Tomas Vondra
Discussion: https://postgr.es/m/CAD21AoAYGGC1ePjVX0H%2Bpp9rH%3D9vuPK19nNOiu12NprdV5TVJA%40mail.gmail.com
It's now possible to specify a table access method via
CREATE TABLE ... USING for a partitioned table, as well change it with
ALTER TABLE ... SET ACCESS METHOD. Specifying an AM for a partitioned
table lets the value be used for all future partitions created under it,
closely mirroring the behavior of the TABLESPACE option for partitioned
tables. Existing partitions are not modified.
For a partitioned table with no AM specified, any new partitions are
created with the default_table_access_method.
Also add ALTER TABLE ... SET ACCESS METHOD DEFAULT, which reverts to the
original state of using the default for new partitions.
The relcache of partitioned tables is not changed: rd_tableam is not
set, even if a partitioned table has a relam set.
Author: Justin Pryzby <pryzby@telsasoft.com>
Author: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Reviewed-by: The authors themselves
Discussion: https://postgr.es/m/CAE-ML+9zM4wJCGCBGv01k96qQ3gFv4WFcFy=zqPHKeaEFwwv6A@mail.gmail.com
Discussion: https://postgr.es/m/20210308010707.GA29832%40telsasoft.com
This reverts commit 6acb0a628eccab8764e0306582c2b7e2a1441b9b since
LibreSSL didn't support ASN1_TIME_diff until OpenBSD 7.1, leaving
the older OpenBSD animals in the buildfarm complaining.
Per plover in the buildfarm.
Discussion: https://postgr.es/m/F0DF7102-192D-4C21-96AE-9A01AE153AD1@yesql.se
Up to now, all of the "catcache list" objects within a catalog cache
were just chained together on a single dlist, requiring O(N) time to
search. Remarkably, we've not had serious performance problems with
that so far; but we got a complaint of a bad performance regression
from v15 in a case with a large number of roles in the system, which
traced down to O(N^2) total time when we probed N catcache lists.
Replace that data structure with a hashtable having an enlargeable
number of dlists, in an exactly parallel way to the data structure
we've used for years for the plain CatCTup cache members. The extra
cost of maintaining a hash table seems negligible, since we were
already computing a hash value for list searches.
Normally this'd be HEAD-only material, but in view of the performance
regression it seems advisable to back-patch into v16. In the v16
version of the patch, leave the dead cc_lists field where it is and
add the new fields at the end of struct catcache, to avoid possible
ABI breakage in case any external code is looking at these structs.
(We assume no external code is actually allocating new catcache
structs.)
Per report from alex work.
Discussion: https://postgr.es/m/CAGvXd3OSMbJQwOSc-Tq-Ro1CAz=vggErdSG7pv2s6vmmTOLJSg@mail.gmail.com
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate. OpenSSL has
APIs for extracting notAfter and notBefore, but they are only
supported in recent versions so we have to calculate the dates
by hand in order to make this work for the older versions of
OpenSSL that we still support.
Original patch by Cary Huang with additional hacking by Jacob
and myself.
Author: Cary Huang <cary.huang@highgo.ca>
Co-author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
The new table AM method free_rd_amcache is responsible for freeing all the
memory related to rd_amcache and setting free_rd_amcache to NULL. If the new
method is not specified, we still assume rd_amcache to be a single chunk of
memory, which could be just pfree'd.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
Based on comments from Peter Eisentraut.
* Document CREATE DATABASE ... BUILTIN_LOCALE.
* Determine required encoding based on locale name for CREATE
COLLATION. Use -1 for "C" (requires catversion bump).
* initdb output fixups.
* Make ctype_is_c a constant true for now.
* Fixups to ICU 010_create_database.pl test.
Discussion: https://postgr.es/m/4135cf11-206d-40ed-96c0-9363c1232379@eisentraut.org
New provider for collations, like "libc" or "icu", but without any
external dependency.
Initially, the only locale supported by the builtin provider is "C",
which is identical to the libc provider's "C" locale. The libc
provider's "C" locale has always been treated as a special case that
uses an internal implementation, without using libc at all -- so the
new builtin provider uses the same implementation.
The builtin provider's locale is independent of the server environment
variables LC_COLLATE and LC_CTYPE. Using the builtin provider, the
database collation locale can be "C" while LC_COLLATE and LC_CTYPE are
set to "en_US", which is impossible with the libc provider.
By offering a new builtin provider, it clarifies that the semantics of
a collation using this provider will never depend on libc, and makes
it easier to document the behavior.
Discussion: https://postgr.es/m/ab925f69-5f9d-f85e-b87c-bd2a44798659@joeconway.com
Discussion: https://postgr.es/m/dd9261f4-7a98-4565-93ec-336c1c110d90@manitou-mail.org
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
Roles with MAINTAIN on a relation may run VACUUM, ANALYZE, REINDEX,
REFRESH MATERIALIZE VIEW, CLUSTER, and LOCK TABLE on the relation.
Roles with privileges of pg_maintain may run those same commands on
all relations.
This was previously committed for v16, but it was reverted in
commit 151c22deee due to concerns about search_path tricks that
could be used to escalate privileges to the table owner. Commits
2af07e2f74, 59825d1639, and c7ea3f4229 resolved these concerns by
restricting search_path when running maintenance commands.
Bumps catversion.
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20240305161235.GA3478007%40nathanxps13
... and in particular don't return them as replica identity.
The motivation for this change is letting the primary keys be seen by
code that derives NOT NULL constraints from them, when creating
inheritance children; before this change, if you had a deferrable PK,
pg_dump would not recreate the attnotnull marking properly, because the
column would not be considered as having anything to back said marking
after dropping the throwaway NOT NULL constraint.
The reason we don't want these PKs as replica identities is that
replication can corrupt data, if the uniqueness constraint is
transiently broken.
Reported-by: Amul Sul <sulamul@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b94QonkgsbDXofakHDnORQNgafd1y3Oa5QXfpQNJyXyQ7A@mail.gmail.com
You might run out of stack space with recursion, which is not nice in
functions that might be used e.g. at cleanup after transaction
abort. MemoryContext contains pointer to parent and siblings, so we
can traverse a tree of contexts iteratively, without using
stack. Refactor the functions to do that.
MemoryContextStats() still recurses, but it now has a limit to how
deep it recurses. Once the limit is reached, it prints just a summary
of the rest of the hierarchy, similar to how it summarizes contexts
with lots of children. That seems good anyway, because a context dump
with hundreds of nested contexts isn't very readable.
Report by Egor Chindyaskin and Alexander Lakhin.
Discussion: https://postgr.es/m/1672760457.940462079%40f306.i.mail.ru
Author: Heikki Linnakangas
Reviewed-by: Robert Haas, Andres Freund, Alexander Korotkov, Tom Lane
