When triggers are cloned from partitioned tables to their partitions,
the 'tgenabled' flag (origin/replica/always/disable) was not propagated.
Make it so that the flag on the trigger on partition is initially set to
the same value as on the partitioned table.
Add a test case to verify the behavior.
Backpatch to 11, where this appeared in commit 86f575948c77.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c6550776394e we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
This commit fixes the description of a couple of multirange operators and
oprjoin for another multirange operator. The change of oprjoin is more
cosmetic since both old and new functions return the same constant.
These cosmetic changes don't worth catalog incompatibility between 14beta2
and 14beta3. So, catversion isn't bumped.
Discussion: https://postgr.es/m/CAPpHfdv9OZEuZDqOQoUKpXhq%3Dmc-qa4gKCPmcgG5Vvesu7%3Ds1w%40mail.gmail.com
Backpatch-throgh: 14
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
The name introduced by commit 4656e3d66 was agreed to be unreasonably
long. To match this change, rename initdb's recently-added
--clobber-cache option to --discard-caches.
Discussion: https://postgr.es/m/1374320.1625430433@sss.pgh.pa.us
Apple's mechanism for dealing with functions that are available
in only some OS versions confuses AC_CHECK_FUNCS, and therefore
AC_REPLACE_FUNCS. We can use AC_CHECK_DECLS instead, so long as
we enable -Werror=unguarded-availability-new. This allows people
compiling for macOS to control whether or not preadv/pwritev are
used by setting MACOSX_DEPLOYMENT_TARGET, rather than supplying
a back-rev SDK. (Of course, the latter still works, too.)
James Hilliard
Discussion: https://postgr.es/m/20210122193230.25295-1-james.hilliard1@gmail.com
The separate libldap_r is gone and libldap itself is now always
thread-safe. Unfortunately there seems no easy way to tell by
inspection whether libldap is thread-safe, so we have to take
it on faith that libldap is thread-safe if there's no libldap_r.
That should be okay, as it appears that libldap_r was a standard
part of the installation going back at least 20 years.
Report and patch by Adrian Ho. Back-patch to all supported
branches, since people might try to build any of them with
a newer OpenLDAP.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
The existing code tried to do syscache lookups in an already-failed
transaction, which is problematic to say the least. After some
consideration of alternatives, the best fix seems to be to just drop
type names from the error message altogether. The table and column
names seem like sufficient localization. If the user is unsure what
types are involved, she can check the local and remote table
definitions.
Having done that, we can also discard the LogicalRepTypMap hash
table, which had no other use. Arguably, LOGICAL_REP_MSG_TYPE
replication messages are now obsolete as well; but we should
probably keep them in case some other use emerges. (The complexity
of removing something from the replication protocol would likely
outweigh any savings anyhow.)
Masahiko Sawada and Bharath Rupireddy, per complaint from Andres
Freund. Back-patch to v10 where this code originated.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
In the "simple Query" code path, it's fine for parse analysis or
execution of a utility statement to scribble on the statement's node
tree, since that'll just be thrown away afterwards. However it's
not fine if the node tree is in the plan cache, as then it'd be
corrupted for subsequent executions. Up to now we've dealt with
that by having individual utility-statement functions apply
copyObject() if they were going to modify the tree. But that's
prone to errors of omission. Bug #17053 from Charles Samborski
shows that CREATE/ALTER DOMAIN didn't get this memo, and can
crash if executed repeatedly from plan cache.
In the back branches, we'll just apply a narrow band-aid for that,
but in HEAD it seems prudent to have a more principled fix that
will close off the possibility of other similar bugs in future.
Hence, let's hoist the responsibility for doing copyObject up into
ProcessUtility from its children, thus ensuring that it happens for
all utility statement types.
Also, modify ProcessUtility's API so that its callers can tell it
whether a copy step is necessary. It turns out that in all cases,
the immediate caller knows whether the node tree is transient, so
this doesn't involve a huge amount of code thrashing. In this way,
while we lose a little bit in the execute-from-cache code path due
to sometimes copying node trees that wouldn't be mutated anyway,
we gain something in the simple-Query code path by not copying
throwaway node trees. Statements that are complex enough to be
expensive to copy are almost certainly ones that would have to be
copied anyway, so the loss in the cache code path shouldn't be much.
(Note that this whole problem applies only to utility statements.
Optimizable statements don't have the issue because we long ago made
the executor treat Plan trees as read-only. Perhaps someday we will
make utility statement execution act likewise, but I'm not holding
my breath.)
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange) and cast multirange as
an array of ranges, which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure. The catalog
description of the cast underlying procedure is duplicated for each multirange
type because we don't have anyrangearray polymorphic type to use here.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu
During decoding for speculative inserts, we were relying for cleaning
toast hash on confirmation records or next change records. But that
could lead to multiple problems (a) memory leak if there is neither a
confirmation record nor any other record after toast insertion for a
speculative insert in the transaction, (b) error and assertion failures
if the next operation is not an insert/update on the same table.
The fix is to start queuing spec abort change and clean up toast hash
and change record during its processing. Currently, we are queuing the
spec aborts for both toast and main table even though we perform cleanup
while processing the main table's spec abort record. Later, if we have a
way to distinguish between the spec abort record of toast and the main
table, we can avoid queuing the change for spec aborts of toast tables.
Reported-by: Ashutosh Bapat
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 9.6, where it was introduced
Discussion: https://postgr.es/m/CAExHW5sPKF-Oovx_qZe4p5oM6Dvof7_P+XgsNAViug15Fm99jA@mail.gmail.com
It was unable to wait on a backend that had already left the procarray.
Users tolerant of that limitation can poll pg_stat_activity. Other
users can employ the "timeout" argument of pg_terminate_backend().
Reviewed by Bharath Rupireddy.
Discussion: https://postgr.es/m/20210605013236.GA208701@rfd.leadboat.com
Revert the pg_description entry to its v13 form, since those messages
usually remain shorter and don't discuss individual parameters. No
catversion bump, since pg_description content does not impair backend
compatibility or application compatibility.
Justin Pryzby
Discussion: https://postgr.es/m/20210612182743.GY16435@telsasoft.com
Commit b663a41363 introduced bulk inserts for FDW, but the handling of
tuple slots turned out to be problematic for two reasons. Firstly, the
slots were re-created for each individual batch. Secondly, all slots
referenced the same tuple descriptor - with reasonably small batches
this is not an issue, but with large batches this triggers O(N^2)
behavior in the resource owner code.
These two issues work against each other - to reduce the number of times
a slot has to be created/dropped, larger batches are needed. However,
the larger the batch, the more expensive the resource owner gets. For
practical batch sizes (100 - 1000) this would not be a big problem, as
the benefits (latency savings) greatly exceed the resource owner costs.
But for extremely large batches it might be much worse, possibly even
losing with non-batching mode.
Fixed by initializing tuple slots only once (and reusing them across
batches) and by using a new tuple descriptor copy for each slot.
Discussion: https://postgr.es/m/ebbbcc7d-4286-8c28-0272-61b4753af761%40enterprisedb.com
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
Commit 19890a064e added the option to enable two_phase commits via
pg_create_logical_replication_slot but didn't extend the support of same
in replication protocol. However, by mistake, it added the two_phase
variable in CreateReplicationSlotCmd which is required only when we extend
the replication protocol.
Reported-by: Jeff Davis
Author: Ajin Cherian
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/64b9f783c6e125f18f88fbc0c0234e34e71d8639.camel@j-davis.com
Commit a4d75c86bf added a new flag, tracking if the statement was
processed by transformStatsStmt(), but failed to add this flag to
nodes/*funcs.c.
Catversion bump, due to adding a flag to copy/equal/out functions.
Reported-by: Noah Misch
Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com
The documented intent is for all columns except subconninfo to be
publicly readable. However, this has been overlooked twice.
subsynccommit has never been readable since it was introduced,
nor has the oid column (which is important for joining).
Given the lack of previous complaints, it's not clear that it's
worth doing anything about this in the back branches. But there's
still time to fix it inexpensively for v14.
Per report from Israel Barth (via Euler Taveira).
Patch by Euler Taveira, possibly-vain comment updates by me.
Discussion: https://postgr.es/m/b8f7c17c-0041-46b6-acfe-2d1f5a985ab4@www.fastmail.com
The reference here to different physical column numbers in inherited
UPDATE/DELETE plans is obsolete as of 86dc90056; remove it. Also
rework the text about inheritance cases to make it clearer.
Commit ab596105b increased FirstBootstrapObjectId from 12000 to 13000,
but we've had some push-back about that. It's worrisome to reduce the
daylight between there and FirstNormalObjectId, because the number of
OIDs consumed during initdb for collation objects is hard to predict.
We can improve the situation by abandoning the assumption that these
OIDs must be globally unique. It should be sufficient for them to be
unique per-catalog. (Any code that's unhappy about that is broken
anyway, since no more than per-catalog uniqueness can be guaranteed
once the OID counter wraps around.) With that change, the largest OID
assigned during genbki.pl (starting from a base of 10000) is a bit
under 11000. This allows reverting FirstBootstrapObjectId to 12000
with reasonable confidence that that will be sufficient for many years
to come.
We are not, at this time, abandoning the expectation that
hand-assigned OIDs (below 10000) are globally unique. Someday that'll
likely be necessary, but the need seems years away still.
This is late for v14, but it seems worth doing it now so that
downstream software doesn't have to deal with the consequences of
a change in FirstBootstrapObjectId. In any case, we already
bought into forcing an initdb for beta2, so another catversion
bump won't hurt.
Discussion: https://postgr.es/m/1665197.1622065382@sss.pgh.pa.us
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
While decoding the multi-insert WAL we can't clean the toast untill we get
the last insert of that WAL record. Now if we stream the changes before we
get the last change, the memory for toast chunks won't be released and we
expect the txn to have streamed all changes after streaming. This
restriction is mainly to ensure the correctness of streamed transactions
and it doesn't seem worth uplifting such a restriction just to allow this
case because anyway we will stream the transaction once such an insert is
complete.
Previously we were using two different flags (one for toast tuples and
another for speculative inserts) to indicate partial changes. Now instead
we replaced both of them with a single flag to indicate partial changes.
Reported-by: Pavan Deolasee
Author: Dilip Kumar
Reviewed-by: Pavan Deolasee, Amit Kapila
Discussion: https://postgr.es/m/CABOikdN-_858zojYN-2tNcHiVTw-nhxPwoQS4quExeweQfG1Ug@mail.gmail.com
Now that attcompression is just a char, there's a lot of wasted
padding space after it. Move it into the group of char-wide
columns to save a net of 4 bytes per pg_attribute entry. While
we're at it, swap the order of attstorage and attalign to make for
a more logical grouping of these columns.
Also re-order actions in related code to match the new field ordering.
This patch also fixes one outright bug: equalTupleDescs() failed to
compare attcompression. That could, for example, cause relcache
reload to fail to adopt a new value following a change.
Michael Paquier and Tom Lane, per a gripe from Andres Freund.
Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de
COMMIT/ROLLBACK necessarily destroys all snapshots within the session.
The original implementation of intra-procedure transactions just
cavalierly did that, ignoring the fact that this left us executing in
a rather different environment than normal. In particular, it turns
out that handling of toasted datums depends rather critically on there
being an outer ActiveSnapshot: otherwise, when SPI or the core
executor pop whatever snapshot they used and return, it's unsafe to
dereference any toasted datums that may appear in the query result.
It's possible to demonstrate "no known snapshots" and "missing chunk
number N for toast value" errors as a result of this oversight.
Historically this outer snapshot has been held by the Portal code,
and that seems like a good plan to preserve. So add infrastructure
to pquery.c to allow re-establishing the Portal-owned snapshot if it's
not there anymore, and add enough bookkeeping support that we can tell
whether it is or not.
We can't, however, just re-establish the Portal snapshot as part of
COMMIT/ROLLBACK. As in normal transaction start, acquiring the first
snapshot should wait until after SET and LOCK commands. Hence, teach
spi.c about doing this at the right time. (Note that this patch
doesn't fix the problem for any PLs that try to run intra-procedure
transactions without using SPI to execute SQL commands.)
This makes SPI's no_snapshots parameter rather a misnomer, so in HEAD,
rename that to allow_nonatomic.
replication/logical/worker.c also needs some fixes, because it wasn't
careful to hold a snapshot open around AFTER trigger execution.
That code doesn't use a Portal, which I suspect someday we're gonna
have to fix. But for now, just rearrange the order of operations.
This includes back-patching the recent addition of finish_estate()
to centralize the cleanup logic there.
This also back-patches commit 2ecfeda3e into v13, to improve the
test coverage for worker.c (it was that test that exposed that
worker.c's snapshot management is wrong).
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
1) Previously there were both pgstat_send_wal() and pgstat_report_wal()
in order to send WAL activity to the stats collector. With the former being
used by wal writer, the latter by most other processes. They were a bit
redundant and so this commit merges them into pgstat_send_wal() to
simplify the code.
2) Previously WAL global statistics counters were calculated and then
compared with zero-filled buffer in order to determine whether any WAL
activity has happened since the last submission. These calculation and
comparison were not cheap. This was regularly exercised even in read-only
workloads. This commit fixes the issue by making some WAL activity
counters directly be checked to determine if there's WAL activity stats
to send.
3) Previously pgstat_report_stat() did not check if there's WAL activity
stats to send as part of the "Don't expend a clock check if nothing to do"
check at the top. It's probably rare to have pending WAL stats without
also passing one of the other conditions, but for safely this commit
changes pgstat_report_stats() so that it checks also some WAL activity
counters at the top.
This commit also adds the comments about the design of WAL stats.
Reported-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi, Andres Freund, Fujii Masao
Discussion: https://postgr.es/m/20210324232224.vrfiij2rxxwqqjjb@alap3.anarazel.de
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
Split up CHECK_FOR_INTERRUPTS() to provide an additional macro
INTERRUPTS_PENDING_CONDITION(), which just tests whether an
interrupt is pending without attempting to service it. This is
useful in situations where the caller knows that interrupts are
blocked, and would like to find out if it's worth the trouble
to unblock them.
Also add INTERRUPTS_CAN_BE_PROCESSED(), which indicates whether
CHECK_FOR_INTERRUPTS() can be relied on to clear the pending interrupt.
This commit doesn't actually add any uses of the new macros,
but a follow-on bug fix will do so. Back-patch to all supported
branches to provide infrastructure for that fix.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/20210513155351.GA7848@alvherre.pgsql
The worker.c global wrconn is only meant to be used by logical apply/
tablesync workers, but there are other variables with the same name. To
reduce future confusion rename the global from "wrconn" to
"LogRepWorkerWalRcvConn".
While this is just cosmetic, it seems better to backpatch it all the way
back to 10 where this code appeared, to avoid future backpatching
issues.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid 8000 --target-oid 6150
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
Previously long was used as the data type for some counters in BufferUsage
and WalUsage. But long is only four byte, e.g., on Windows, and it's entirely
possible to wrap a four byte counter. For example, emitting more than
four billion WAL records in one transaction isn't actually particularly rare.
To avoid the overflows of those counters, this commit changes the data type
of them from long to int64.
Suggested-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20201221211650.k7b53tcnadrciqjo@alap3.anarazel.de
Discussion: https://postgr.es/m/af0964ac-7080-1984-dc23-513754987716@oss.nttdata.com
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
While we were (mostly) careful about ensuring that the dimensions of
arrays aren't large enough to cause integer overflow, the lower bound
values were generally not checked. This allows situations where
lower_bound + dimension overflows an integer. It seems that that's
harmless so far as array reading is concerned, except that array
elements with subscripts notionally exceeding INT_MAX are inaccessible.
However, it confuses various array-assignment logic, resulting in a
potential for memory stomps.
Fix by adding checks that array lower bounds aren't large enough to
cause lower_bound + dimension to overflow. (Note: this results in
disallowing cases where the last subscript position would be exactly
INT_MAX. In principle we could probably allow that, but there's a lot
of code that computes lower_bound + dimension and would need adjustment.
It seems doubtful that it's worth the trouble/risk to allow it.)
Somewhat independently of that, array_set_element() was careless
about possible overflow when checking the subscript of a fixed-length
array, creating a different route to memory stomps. Fix that too.
Security: CVE-2021-32027
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
These comments left the impression that USE_VALGRIND isn't really
essential for valgrind testing. But that's wrong, as I learned
the hard way today.
Discussion: https://postgr.es/m/512778.1620588546@sss.pgh.pa.us
It seems that various people have moved GUCs around in the config.sgml
listing without bothering to make the code agree. Ensure that the
config_group codes assigned to GUCs match where they are listed in
config.sgml. Likewise ensure that postgresql.conf.sample lists GUCs
in the same sub-section and same ordering as they appear in config.sgml.
(I've got some doubts about some of these choices, but for the purposes
of this patch, we'll treat config.sgml as gospel.)
Notably, this requires adding a WAL_RECOVERY config_group value,
because 1d257577e didn't. As long as we're renumbering that enum
anyway, let's take out the values corresponding to major groups
that are divided into sub-groups. No GUC should be assigned to the
major group itself, so those values just create a temptation to
do the wrong thing, while adding work for translators.
In passing, adjust the short_desc strings for PRESET_OPTIONS GUCs
to uniformly use the phrasing "Shows XYZ.", removing the impression
some of these strings left that you can set the value.
While some of these errors are old, no back-patch, as changing the
contents of the pg_settings view in stable branches seems more likely
to be seen as a compatibility break than anything helpful.
Bharath Rupireddy, Justin Pryzby, Tom Lane
Discussion: https://postgr.es/m/16997-ff16127f6e0d1390@postgresql.org
Discussion: https://postgr.es/m/20210413123139.GE6091@telsasoft.com
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
In d6b8d29419df I (Álvaro) was sloppy about recording whether a
partition descripor does or does not include detached partitions, when
the snapshot checking does not see the pg_inherits row marked detached.
In that case no partition was omitted, yet in the relcache entry we were
saving the partdesc as omitting partitions. Flip that (so we save it as
a partdesc not omitting partitions, which indeed it doesn't), which
hopefully makes the code easier to reason about.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqE7GxGU4VdzwZzfiz+Ont5SsopoFkgtrZGEdPqWRL+biA@mail.gmail.com
Currently, replication slot statistics are updated at prepare, commit, and
rollback. Now, if the transaction is interrupted the stats might not get
updated. Fixed this by updating replication statistics after every
stream/spill.
In passing update the docs to change the description of some of the slot
stats.
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
We had a report of confusing server behavior caused by a client bug
that sent junk to the server: the server thought the junk was a
very long message length and waited patiently for data that would
never come. We can reduce the risk of that by being less trusting
about message lengths.
For a long time, libpq has had a heuristic rule that it wouldn't
believe large message size words, except for a small number of
message types that are expected to be (potentially) long. This
provides some defense against loss of message-boundary sync and
other corrupted-data cases. The server does something similar,
except that up to now it only limited the lengths of messages
received during the connection authentication phase. Let's
do the same as in libpq and put restrictions on the allowed
length of all messages, while distinguishing between message
types that are expected to be long and those that aren't.
I used a limit of 10000 bytes for non-long messages. (libpq's
corresponding limit is 30000 bytes, but given the asymmetry of
the FE/BE protocol, there's no good reason why the numbers should
be the same.) Experimentation suggests that this is at least a
factor of 10, maybe a factor of 100, more than we really need;
but plenty of daylight seems desirable to avoid false positives.
In any case we can adjust the limit based on beta-test results.
For long messages, set a limit of MaxAllocSize - 1, which is the
most that we can absorb into the StringInfo buffer that the message
is collected in. This just serves to make sure that a bogus message
size is reported as such, rather than as a confusing gripe about
not being able to enlarge a string buffer.
While at it, make sure that non-mainline code paths (such as
COPY FROM STDIN) are as paranoid as SocketBackend is, and validate
the message type code before believing the message length.
This provides an additional guard against getting stuck on corrupted
input.
Discussion: https://postgr.es/m/2003757.1619373089@sss.pgh.pa.us
