Performing JIT compilation for deforming gains performance benefits
over unJITed deforming from compile-time knowledge of the tuple
descriptor. Fixed column widths, NOT NULLness, etc can be taken
advantage of.
Right now the JITed deforming is only used when deforming tuples as
part of expression evaluation (and obviously only if the descriptor is
known). It's likely to be beneficial in other cases, too.
By default tuple deforming is JITed whenever an expression is JIT
compiled. There's a separate boolean GUC controlling it, but that's
expected to be primarily useful for development and benchmarking.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Commit eb7ed3f30634 enabled unique constraints on partitioned tables,
but one thing that was not working properly is INSERT/ON CONFLICT.
This commit introduces a new node keeps state related to the ON CONFLICT
clause per partition, and fills it when that partition is about to be
used for tuple routing.
Author: Amit Langote, Álvaro Herrera
Reviewed-by: Etsuro Fujita, Pavan Deolasee
Discussion: https://postgr.es/m/20180228004602.cwdyralmg5ejdqkq@alvherre.pgsql
Revert the PL/Perl-specific change in
9a95a77d9d5d3003d2d67121f2731b6e5fc37336. We must not prevent Perl from
using stdbool.h when it has been built to do so, even if it uses an
incompatible size. Otherwise, we would be imposing our bool on Perl,
which will lead to crashes because of the size mismatch.
Instead, we undef bool after including the Perl headers, as we did
previously, but now only if we are not using stdbool.h ourselves.
Record that choice in c.h as USE_STDBOOL. This will also make it easier
to apply that coding pattern elsewhere if necessary.
Previously, FOR EACH ROW triggers were not allowed in partitioned
tables. Now we allow AFTER triggers on them, and on trigger creation we
cascade to create an identical trigger in each partition. We also clone
the triggers to each partition that is created or attached later.
This means that deferred unique keys are allowed on partitioned tables,
too.
Author: Álvaro Herrera
Reviewed-by: Peter Eisentraut, Simon Riggs, Amit Langote, Robert Haas,
Thomas Munro
Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
The LLVM JIT provider uses clang to synchronize types between normal C
code and runtime generated code. Clang represents stdbool.h style
booleans in return values & parameters differently from booleans
stored in variables.
Thus the expression compilation code from 2a0faed9d needs to be
adapted to 9a95a77d9. Instead of hardcoding i8 as the type for
booleans (which already was wrong on some edge case platforms!), use
postgres' notion of a boolean as used for storage and for parameters.
Per buildfarm animal xenodermus.
Author: Andres Freund
Using the standard bool type provided by C allows some recent compilers
and debuggers to give better diagnostics. Also, some extension code and
third-party headers are increasingly pulling in stdbool.h, so it's
probably saner if everyone uses the same definition.
But PostgreSQL code is not prepared to handle bool of a size other than
1, so we keep our own old definition if we encounter a stdbool.h with a
bool of a different size. (Among current build farm members, this only
applies to old macOS versions on PowerPC.)
To check that the used bool is of the right size, add a static
assertions about size of GinTernaryValue vs bool. This is currently the
only place that assumes that bool and char are of the same size.
Discussion: https://www.postgresql.org/message-id/flat/3a0fe7e1-5ed1-414b-9230-53bbc0ed1f49@2ndquadrant.com
In addition to the interpretation of expressions (which back
evaluation of WHERE clauses, target list projection, aggregates
transition values etc) support compiling expressions to native code,
using the infrastructure added in earlier commits.
To avoid duplicating a lot of code, only support emitting code for
cases that are likely to be performance critical. For expression steps
that aren't deemed that, use the existing interpreter.
The generated code isn't great - some architectural changes are
required to address that. But this already yields a significant
speedup for some analytics queries, particularly with WHERE clauses
filtering a lot, or computing multiple aggregates.
Author: Andres Freund
Tested-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Disable JITing for VALUES() nodes.
VALUES() nodes are only ever executed once. This is primarily helpful
for debugging, when forcing JITing even for cheap queries.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
For any interesting JIT target, fields inside structs need to be
accessed. b96d550e contains infrastructure for syncing the definition
of types between postgres C code and runtime code generation with
LLVM. But that doesn't sync the number or names of fields inside
structs, just the types (including padding etc).
One option would be to hardcode the offset numbers in the JIT code,
but that'd be hard to keep in sync. Instead add macros indicating the
field offset to the fields that need to be accessed. Not pretty, but
manageable.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This adds simple cost based plan time decision about whether JIT
should be performed. jit_above_cost, jit_optimize_above_cost are
compared with the total cost of a plan, and if the cost is above them
JIT is performed / optimization is performed respectively.
For that PlannedStmt and EState have a jitFlags (es_jit_flags) field
that stores information about what JIT operations should be performed.
EState now also has a new es_jit field, which can store a
JitContext. When there are no errors the context is released in
standard_ExecutorEnd().
It is likely that the default values for jit_[optimize_]above_cost
will need to be adapted further, but in my test these values seem to
work reasonably.
Author: Andres Freund, with feedback by Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This commit introduces the ability to actually generate code using
LLVM. In particular, this adds:
- Ability to emit code both in heavily optimized and largely
unoptimized fashion
- Batching facility to allow functions to be defined in small
increments, but optimized and emitted in executable form in larger
batches (for performance and memory efficiency)
- Type and function declaration synchronization between runtime
generated code and normal postgres code. This is critical to be able
to access struct fields etc.
- Developer oriented jit_dump_bitcode GUC, for inspecting / debugging
the generated code.
- per JitContext statistics of number of functions, time spent
generating code, optimizing, and emitting it. This will later be
employed for EXPLAIN support.
This commit doesn't yet contain any code actually generating
functions. That'll follow in later commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with contributions by Pierre Ducroquet
Testing-By: Thomas Munro, Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
If the partition keys of input relation are part of the GROUP BY
clause, all the rows belonging to a given group come from a single
partition. This allows aggregation/grouping over a partitioned
relation to be broken down * into aggregation/grouping on each
partition. This should be no worse, and often better, than the normal
approach.
If the GROUP BY clause does not contain all the partition keys, we can
still perform partial aggregation for each partition and then finalize
aggregation after appending the partial results. This is less certain
to be a win, but it's still useful.
Jeevan Chalke, Ashutosh Bapat, Robert Haas. The larger patch series
of which this patch is a part was also reviewed and tested by Antonin
Houska, Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin
Knizhnik, Pascal Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
This commit introduces:
1) JIT provider abstraction, which allows JIT functionality to be
implemented in separate shared libraries. That's desirable because
it allows to install JIT support as a separate package, and because
it allows experimentation with different forms of JITing.
2) JITContexts which can be, using functions introduced in follow up
commits, used to emit JITed functions, and have them be cleaned up
on error.
3) The outline of a LLVM JIT provider, which will be fleshed out in
subsequent commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with architectural input from Jeff Davis
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
I noticed while fooling with John Naylor's bootstrap-data patch that we had
one high-numbered manually assigned OID, 8888, which evidently came from a
submission that the committer didn't bother to bring into line with usual
OID allocation practices before committing. That's a bad idea, because it
creates a hazard for other patches that may be temporarily using high OID
numbers. Change it to something more in line with what we usually do.
This evidently dates to commit abb173392. It's too late to change it
in released branches, but we can fix it in HEAD.
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2bd3d4629bd73ae3548e671c57d785f0, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
LLVM will be used for *optional* Just-in-time compilation
support. This commit just adds the configure infrastructure that
detects LLVM.
No documentation has been added for the --with-llvm flag, that'll be
added after the actual supporting code has been added.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Since e3bdb2d92600ed45bd46aaf48309a436a9628218, libpq failed to build on
some platforms because they did not have SSL_clear_options(). Although
mainline OpenSSL introduced SSL_clear_options() after
SSL_OP_NO_COMPRESSION, so the code should have built fine, at least an
old NetBSD version (build farm "coypu" NetBSD 5.1 gcc 4.1.3 PR-20080704
powerpc) has SSL_OP_NO_COMPRESSION but no SSL_clear_options().
So add a configure check for SSL_clear_options(). If we don't find it,
skip the call. That means on such a platform one cannot *enable* SSL
compression if the built-in default is off, but that seems an unlikely
combination anyway and not very interesting in practice.
Since commit 4f15e5d09de276fb77326be5567dd9796008ca2e made grouped_rel
set reltarget, a variety of other functions can just get it from
grouped_rel instead of having to pass it around explicitly. Simplify
accordingly.
Patch by me, reviewed by Ashutosh Bapat.
Discussion: http://postgr.es/m/CA+TgmoZ+ZJTVad-=vEq393N99KTooxv9k7M+z73qnTAqkb49BQ@mail.gmail.com
The original coding of the SP-GiST scan traversalValue feature (commit
ccd6eb49a) arranged for traversal values to be stored in the query's main
executor context. That's fine if there's only one index scan per query,
but if there are many, we have a memory leak as successive scans create
new traversal values. Fix it by creating a separate memory context for
traversal values, which we can reset during spgrescan(). Back-patch
to 9.6 where this code was introduced.
In principle, adding the traversalCxt field to SpGistScanOpaqueData
creates an ABI break in the back branches. But I (tgl) have little
sympathy for extensions including spgist_private.h, so I'm not very
worried about that. Alternatively we could stick the new field at the
end of the struct in back branches, but that has its own downsides.
Anton Dignös, reviewed by Alexander Kuzmenkov
Discussion: https://postgr.es/m/CALNdv1jb6y2Te-m8xHLxLX12RsBmZJ1f4hESX7J0HjgyOhA9eA@mail.gmail.com
refresh_by_match_merge() has some issues in the way it builds a SQL
query to construct the "diff" table:
1. It doesn't require the selected unique index(es) to be indimmediate.
2. It doesn't pay attention to the particular equality semantics enforced
by a given index, but just assumes that they must be those of the column
datatype's default btree opclass.
3. It doesn't check that the indexes are btrees.
4. It's insufficiently careful to ensure that the parser will pick the
intended operator when parsing the query. (This would have been a
security bug before CVE-2018-1058.)
5. It's not careful about indexes on system columns.
The way to fix#4 is to make use of the existing code in ri_triggers.c
for generating an arbitrary binary operator clause. I chose to move
that to ruleutils.c, since that seems a more reasonable place to be
exporting such functionality from than ri_triggers.c.
While #1, #3, and #5 are just latent given existing feature restrictions,
and #2 doesn't arise in the core system for lack of alternate opclasses
with different equality behaviors, #4 seems like an issue worth
back-patching. That's the bulk of the change anyway, so just back-patch
the whole thing to 9.4 where this code was introduced.
Discussion: https://postgr.es/m/13836.1521413227@sss.pgh.pa.us
These values can be obtained from the ModifyTable node which is already
a part of both the ModifyTableState and ExecInsert.
Author: Álvaro Herrera, Amit Langote
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/20180316151303.rml2p5wffn3o6qy6@alvherre.pgsql
We make some changes to ModifyTableState and the EState it uses whenever
we route tuples to partitions; but we weren't restoring properly in all
cases, possibly causing crashes when partitions with different tuple
descriptors are targeted by tuples inserted in the same command.
Refactor some code, creating ExecPrepareTupleRouting, to encapsulate the
needed state changing logic, and have it invoked one level above its
current place (ie. put it in ExecModifyTable instead of ExecInsert);
this makes it all more readable.
Add a test case to exercise this.
We don't support having views as partitions; and since only views can
have INSTEAD OF triggers, there is no point in testing for INSTEAD OF
when processing insertions into a partitioned table. Remove code that
appears to support this (but which is actually never relevant.)
In passing, fix location of some very confusing comments in
ModifyTableState.
Reported-by: Amit Langote
Author: Etsuro Fujita, Amit Langote
Discussion: https://postgr/es/m/0473bf5c-57b1-f1f7-3d58-455c2230bc5f@lab.ntt.co.jp
"UPDATE/DELETE WHERE CURRENT OF cursor_name" failed, with an error message
like "cannot extract system attribute from virtual tuple", if the cursor
was using a index-only scan for the target table. Fix it by digging the
current TID out of the indexscan state.
It seems likely that the same failure could occur for CustomScan plans
and perhaps some FDW plan types, so that leaving this to be treated as an
internal error with an obscure message isn't as good an idea as it first
seemed. Hence, add a bit of heaptuple.c infrastructure to let us deliver
a more on-topic message. I chose to make the message match what you get
for the case where execCurrentOf can't identify the target scan node at
all, "cursor "foo" is not a simply updatable scan of table "bar"".
Perhaps it should be different, but we can always adjust that later.
In the future, it might be nice to provide hooks that would let custom
scan providers and/or FDWs deal with this in other ways; but that's
not a suitable topic for a back-patchable bug fix.
It's been like this all along, so back-patch to all supported branches.
Yugo Nagata and Tom Lane
Discussion: https://postgr.es/m/20180201013349.937dfc5f.nagata@sraoss.co.jp
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This allows to deduplicate some existing code, but mainly avoids some
duplication in upcoming commits.
In passing, fix variable names indicating wrong unit (seconds instead
of ms).
Author: Andres Freund
Discussion: https://postgr.es/m/20180314002740.cah3mdsonz5mxney@alap3.anarazel.de
'long' is not useful type across platforms, as it's 32bit on 32 bit
platforms, and even on some 64bit platforms (e.g. windows) it's still
only 32bits wide.
As ExplainPropertyInteger should never be performance critical, change
it to accept a 64bit argument and remove ExplainPropertyLong.
Author: Andres Freund
Discussion: https://postgr.es/m/20180314164832.n56wt7zcbpzi6zxe@alap3.anarazel.de
Instead of embedding the savepoint name in a list and then requiring
complex code to unpack it, just add another struct field to store it
directly.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a1577563f53f2171689d4f890a46881, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
The logical replication type map seems to have been misused by its only
caller -- it would try to use the remote OID as input for local type
routines, which unsurprisingly could result in bogus "cache lookup
failed for type XYZ" errors, or random other type names being picked up
if they happened to use the right OID. Fix that, changing
Oid logicalrep_typmap_getid(Oid remoteid) to
char *logicalrep_typmap_gettypname(Oid remoteid)
which is more useful. If the remote type is not part of the typmap,
this simply prints "unrecognized type" instead of choking trying to
figure out -- a pointless exercise (because the only input for that
comes from replication messages, which are not under the local node's
control) and dangerous to boot, when called from within an error context
callback.
Once that is done, it comes to light that the local OID in the typmap
entry was not being used for anything; the type/schema names are what we
need, so remove local type OID from that struct.
Once you do that, it becomes pointless to attach a callback to regular
syscache invalidation. So remove that also.
Reported-by: Dang Minh Huong
Author: Masahiko Sawada
Reviewed-by: Álvaro Herrera, Petr Jelínek, Dang Minh Huong, Atsushi Torikoshi
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A6BE964@BPXM05GP.gisp.nec.co.jp
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A6C4B0A@BPXM05GP.gisp.nec.co.jp
In a top-level CALL, the values of INOUT arguments will be returned as a
result row. In PL/pgSQL, the values are assigned back to the input
arguments. In other languages, the same convention as for return a
record from a function is used. That does not require any code changes
in the PL implementations.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Autovacuum's 'workitem' request queue is of limited size, so requests
can fail if they arrive more quickly than autovacuum can process them.
Emit a log message when this happens, to provide better visibility of
this.
Backpatch to 10. While this represents an API change for
AutoVacuumRequestWork, that function is not yet prepared to deal with
external modules calling it, so there doesn't seem to be any risk (other
than log spam, that is.)
Author: Masahiko Sawada
Reviewed-by: Fabrízio Mello, Ildar Musin, Álvaro Herrera
Discussion: https://postgr.es/m/CAD21AoB1HrQhp6_4rTyHN5kWEJCEsG8YzsjZNt-ctoXSn5Uisw@mail.gmail.com
The existing logic for updating pg_class.reltuples trusted the sampling
results only for the pages ANALYZE actually visited, preferring to
believe the previous tuple density estimate for all the unvisited pages.
While there's some rationale for doing that for VACUUM (first that
VACUUM is likely to visit a very nonrandom subset of pages, and second
that we know for sure that the unvisited pages did not change), there's
no such rationale for ANALYZE: by assumption, it's looked at an unbiased
random sample of the table's pages. Furthermore, in a very large table
ANALYZE will have examined only a tiny fraction of the table's pages,
meaning it cannot slew the overall density estimate very far at all.
In a table that is physically growing, this causes reltuples to increase
nearly proportionally to the change in relpages, regardless of what is
actually happening in the table. This has been observed to cause reltuples
to become so much larger than reality that it effectively shuts off
autovacuum, whose threshold for doing anything is a fraction of reltuples.
(Getting to the point where that would happen seems to require some
additional, not well understood, conditions. But it's undeniable that if
reltuples is seriously off in a large table, ANALYZE alone will not fix it
in any reasonable number of iterations, especially not if the table is
continuing to grow.)
Hence, restrict the use of vac_estimate_reltuples() to VACUUM alone,
and in ANALYZE, just extrapolate from the sample pages on the assumption
that they provide an accurate model of the whole table. If, by very bad
luck, they don't, at least another ANALYZE will fix it; in the old logic
a single bad estimate could cause problems indefinitely.
In HEAD, let's remove vac_estimate_reltuples' is_analyze argument
altogether; it was never used for anything and now it's totally pointless.
But keep it in the back branches, in case any third-party code is calling
this function.
Per bug #15005. Back-patch to all supported branches.
David Gould, reviewed by Alexander Kuzmenkov, cosmetic changes by me
Discussion: https://postgr.es/m/20180117164916.3fdcf2e9@engels
Several places used similar code to convert a string to an int, so take
the function that we already had and make it globally available.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
A Value node would store an integer as a long. This causes needless
portability risks, as long can be of varying sizes. Change it to use
int instead. All code using this was already careful to only store
32-bit values anyway.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
One of the things canonicalize_qual() does is to remove constant-NULL
subexpressions of top-level AND/OR clauses. It does that on the assumption
that what it's given is a top-level WHERE clause, so that NULL can be
treated like FALSE. Although this is documented down inside a subroutine
of canonicalize_qual(), it wasn't mentioned in the documentation of that
function itself, and some callers hadn't gotten that memo.
Notably, commit d007a9505 caused get_relation_constraints() to apply
canonicalize_qual() to CHECK constraints. That allowed constraint
exclusion to misoptimize situations in which a CHECK constraint had a
provably-NULL subclause, as seen in the regression test case added here,
in which a child table that should be scanned is not. (Although this
thinko is ancient, the test case doesn't fail before 9.2, for reasons
I've not bothered to track down in detail. There may be related cases
that do fail before that.)
More recently, commit f0e44751d added an independent bug by applying
canonicalize_qual() to index expressions, which is even sillier since
those might not even be boolean. If they are, though, I think this
could lead to making incorrect index entries for affected index
expressions in v10. I haven't attempted to prove that though.
To fix, add an "is_check" parameter to canonicalize_qual() to specify
whether it should assume WHERE or CHECK semantics, and make it perform
NULL-elimination accordingly. Adjust the callers to apply the right
semantics, or remove the call entirely in cases where it's not known
that the expression has one or the other semantics. I also removed
the call in some cases involving partition expressions, where it should
be a no-op because such expressions should be canonical already ...
and was a no-op, independently of whether it could in principle have
done something, because it was being handed the qual in implicit-AND
format which isn't what it expects. In HEAD, add an Assert to catch
that type of mistake in future.
This represents an API break for external callers of canonicalize_qual().
While that's intentional in HEAD to make such callers think about which
case applies to them, it seems like something we probably wouldn't be
thanked for in released branches. Hence, in released branches, the
extra parameter is added to a new function canonicalize_qual_ext(),
and canonicalize_qual() is a wrapper that retains its old behavior.
Patch by me with suggestions from Dean Rasheed. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/24475.1520635069@sss.pgh.pa.us
Commit b08df9cab left things rather poorly documented as far as the
exact semantics of "clause_is_check" mode went. Also, that mode did
not really work correctly for predicate_refuted_by; although given the
lack of specification as to what it should do, as well as the lack
of any actual use-case, that's perhaps not surprising.
Rename "clause_is_check" to "weak" proof mode, and provide specifications
for what it should do. I defined weak refutation as meaning "truth of A
implies non-truth of B", which makes it possible to use the mode in the
part of relation_excluded_by_constraints that checks for mutually
contradictory WHERE clauses. Fix up several places that did things wrong
for that definition. (As far as I can see, these errors would only lead
to failure-to-prove, not incorrect claims of proof, making them not
serious bugs even aside from the fact that v10 contains no use of this
mode. So there seems no need for back-patching.)
In addition, teach predicate_refuted_by_recurse that it can use
predicate_implied_by_recurse after all when processing a strong NOT-clause,
so long as it asks for the correct proof strength. This is an optimization
that could have been included in commit b08df9cab, but wasn't.
Also, simplify and generalize the logic that checks for whether nullness of
the argument of IS [NOT] NULL would force overall nullness of the predicate
or clause. (This results in a change in the partition_prune test's output,
as it is now able to prune an all-nulls partition that it did not recognize
before.)
In passing, in PartConstraintImpliedByRelConstraint, remove bogus
conversion of the constraint list to explicit-AND form and then right back
again; that accomplished nothing except forcing a useless extra level of
recursion inside predicate_implied_by.
Discussion: https://postgr.es/m/5983.1520487191@sss.pgh.pa.us
The LIKE INCLUDING ALL clause to CREATE TABLE intuitively indicates
cloning of extended statistics on the source table, but it failed to do
so. Patch it up so that it does. Also include an INCLUDING STATISTICS
option to the LIKE clause, so that the behavior can be requested
individually, or excluded individually.
While at it, reorder the INCLUDING options, both in code and in docs, in
alphabetical order which makes more sense than feature-implementation
order that was previously used.
Backpatch this to Postgres 10, where extended statistics were
introduced, because this is seen as an oversight in a fresh feature
which is better to get consistent from the get-go instead of changing
only in pg11.
In pg11, comments on statistics objects are cloned too. In pg10 they
are not, because I (Álvaro) was too coward to change the parse node as
required to support it. Also, in pg10 I chose not to renumber the
parser symbols for the various INCLUDING options in LIKE, for the same
reason. Any corresponding user-visible changes (docs) are backpatched,
though.
Reported-by: Stephen Froehlich
Author: David Rowley
Reviewed-by: Álvaro Herrera, Tomas Vondra
Discussion: https://postgr.es/m/CY1PR0601MB1927315B45667A1B679D0FD5E5EF0@CY1PR0601MB1927.namprd06.prod.outlook.com
If convert_to_scalar is passed a pair of datatypes it can't cope with,
its former behavior was just to elog(ERROR). While this is OK so far as
the core code is concerned, there's extension code that would like to use
scalarltsel/scalargtsel/etc as selectivity estimators for operators that
work on non-core datatypes, and this behavior is a show-stopper for that
use-case. If we simply allow convert_to_scalar to return FALSE instead of
outright failing, then the main logic of scalarltsel/scalargtsel will work
fine for any operator that behaves like a scalar inequality comparison.
The lack of conversion capability will mean that we can't estimate to
better than histogram-bin-width precision, since the code will effectively
assume that the comparison constant falls at the middle of its bin. But
that's still a lot better than nothing. (Someday we should provide a way
for extension code to supply a custom version of convert_to_scalar, but
today is not that day.)
While poking at this issue, we noted that the existing code for handling
type bytea in convert_to_scalar is several bricks shy of a load.
It assumes without checking that if the comparison value is type bytea,
the bounds values are too; in the worst case this could lead to a crash.
It also fails to detoast the input values, so that the comparison result is
complete garbage if any input is toasted out-of-line, compressed, or even
just short-header. I'm not sure how often such cases actually occur ---
the bounds values, at least, are probably safe since they are elements of
an array and hence can't be toasted. But that doesn't make this code OK.
Back-patch to all supported branches, partly because author requested that,
but mostly because of the bytea bugs. The change in API for the exposed
routine convert_network_to_scalar() is theoretically a back-patch hazard,
but it seems pretty unlikely that any third-party code is calling that
function directly.
Tomas Vondra, with some adjustments by me
Discussion: https://postgr.es/m/b68441b6-d18f-13ab-b43b-9a72188a4e02@2ndquadrant.com
