There's plenty places in frontend code that could benefit from a
string buffer implementation. Some because it yields simpler and
faster code, and some others because of the desire to share code
between backend and frontend.
While there is a string buffer implementation available to frontend
code, libpq's PQExpBuffer, it is clunkier than stringinfo, it
introduces a libpq dependency, doesn't allow for sharing between
frontend and backend code, and has a higher API/ABI stability
requirement due to being exposed via libpq.
Therefore it seems best to just making StringInfo being usable by
frontend code. There's not much to do for that, except for rewriting
two subsequent elog/ereport calls into others types of error
reporting, and deciding on a maximum string length.
For the maximum string size I decided to privately define MaxAllocSize
to the same value as used in the backend. It seems likely that we'll
want to reconsider this for both backend and frontend code in the not
too far away future.
For now I've left stringinfo.h in lib/, rather than common/, to reduce
the likelihood of unnecessary breakage. We could alternatively decide
to provide a redirecting stringinfo.h in lib/, or just not provide
compatibility.
Author: Andres Freund
Reviewed-By: Kyotaro Horiguchi, Daniel Gustafsson
Discussion: https://postgr.es/m/20190920051857.2fhnvhvx4qdddviz@alap3.anarazel.de
In a lot of the places having appendBinaryStringInfo() maintain a
trailing NUL byte wasn't actually meaningful, e.g. when appending an
integer which can contain 0 in one of its bytes.
Removing this yields some small speedup, but more importantly will be
more consistent when providing faster variants of pq_sendint etc.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
This reverts commits fa2fa9955280 and 42f50cb8fa98.
While the functionality that was intended to be provided by these
commits is desired, the patch didn't actually solve as many of the
problematic situations as we hoped, and it created a bunch of its own
problems. Since we're going to require more extensive changes soon for
other reasons and users have been working around these problems for a
long time already, there is no point in spending effort in fixing this
halfway measure.
Per complaint from Tom Lane.
Discussion: https://postgr.es/m/21407.1484606922@sss.pgh.pa.us
(Commit fa2fa9955280 had already been reverted in branches 9.5 as
f858524ee4f and 9.6 as e9e44a0953, so this touches master only.
Commit 42f50cb8fa98 was not present in the older branches.)
Our documentation states that our maximum field size is 1 GB, and that
our maximum row size of 1.6 TB. However, while this might be attainable
in theory with enough contortions, it is not workable in practice; for
starters, pg_dump fails to dump tables containing rows larger than 1 GB,
even if individual columns are well below the limit; and even if one
does manage to manufacture a dump file containing a row that large, the
server refuses to load it anyway.
This commit enables dumping and reloading of such tuples, provided two
conditions are met:
1. no single column is larger than 1 GB (in output size -- for bytea
this includes the formatting overhead)
2. the whole row is not larger than 2 GB
There are three related changes to enable this:
a. StringInfo's API now has two additional functions that allow creating
a string that grows beyond the typical 1GB limit (and "long" string).
ABI compatibility is maintained. We still limit these strings to 2 GB,
though, for reasons explained below.
b. COPY now uses long StringInfos, so that pg_dump doesn't choke
trying to emit rows longer than 1GB.
c. heap_form_tuple now uses the MCXT_ALLOW_HUGE flag in its allocation
for the input tuple, which means that large tuples are accepted on
input. Note that at this point we do not apply any further limit to the
input tuple size.
The main reason to limit to 2 GB is that the FE/BE protocol uses 32 bit
length words to describe each row; and because the documentation is
ambiguous on its signedness and libpq does consider it signed, we cannot
use the highest-order bit. Additionally, the StringInfo API uses "int"
(which is 4 bytes wide in most platforms) in many places, so we'd need
to change that API too in order to improve, which has lots of fallout.
Backpatch to 9.5, which is the oldest that has
MemoryContextAllocExtended, a necessary piece of infrastructure. We
could apply to 9.4 with very minimal additional effort, but any further
than that would require backpatching "huge" allocations too.
This is the largest set of changes we could find that can be
back-patched without breaking compatibility with existing systems.
Fixing a bigger set of problems (for example, dumping tuples bigger than
2GB, or dumping fields bigger than 1GB) would require changing the FE/BE
protocol and/or changing the StringInfo API in an ABI-incompatible way,
neither of which would be back-patchable.
Authors: Daniel Vérité, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/20160229183023.GA286012@alvherre.pgsql
This improves on commit bbfd7edae5aa5ad5553d3c7e102f2e450d4380d4 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
When we are using a C99-compliant vsnprintf implementation (which should be
most places, these days) it is worth the trouble to make use of its report
of how large the buffer needs to be to succeed. This patch adjusts
stringinfo.c and some miscellaneous usages in pg_dump to do that, relying
on the logic recently added in libpgcommon's psprintf.c. Since these
places want to know the number of bytes written once we succeed, modify the
API of pvsnprintf() to report that.
There remains near-duplicate logic in pqexpbuffer.c, but since that code
is in libpq, psprintf.c's approach of exit()-on-error isn't appropriate
for use there. Also note that I didn't bother touching the multitude
of places that call (v)snprintf without any attempt to provide a resizable
buffer.
Release-note-worthy incompatibility: the API of appendStringInfoVA()
changed. If there's any third-party code that's calling that directly,
it will need tweaking along the same lines as in this patch.
David Rowley and Tom Lane
Add __attribute__ decorations for printf format checking to the places that
were missing them. Fix the resulting warnings. Add
-Wmissing-format-attribute to the standard set of warnings for GCC, so these
don't happen again.
The warning fixes here are relatively harmless. The one serious problem
discovered by this was already committed earlier in
cf15fb5cabfbc71e07be23cfbc813daee6c5014f.
The style is set to "printf" for backwards compatibility everywhere except
on Windows, where it is set to "gnu_printf", which eliminates hundreds of
false error messages from modern versions of gcc arising from %m and %ll{d,u}
formats.
This is believed to not change the output at all, with one known exception:
"Subquery Scan foo" becomes "Subquery Scan on foo". (We can fix that if
anyone complains, but it would be a wart, because the old code was clearly
inconsistent.) The main intention is to remove duplicate coding and
provide a cleaner base for subsequent EXPLAIN patching.
Robert Haas
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
a switch statement that has an empty default label. A label of a
switch statement must be followed by a statement (or a label which
is followed by a statement (or a label which ...)).
3. Files include stringinfo.h failed to compile. The macro,
'appendStringInfoCharMacro' is implemented with a '?:' operation
that returns a void expression for the true part and a char expresion
for the false part. Both the true and false parts of the '?:' oper-
ator must return the same type.
Billy G. Allie
