This enables selectivity estimation of the <<, >>, &<, &> and && operators,
as well as the normal inequality operators: <, <=, >=, >. "range @> element"
is also supported, but the range-variant @> and <@ operators are not,
because they cannot be sensibly estimated with lower and upper bound
histograms alone. We would need to make some assumption about the lengths of
the ranges for that. Alexander's patch included a separate histogram of
lengths for that, but I left that out of the patch for simplicity. Hopefully
that will be added as a followup patch.
The fraction of empty ranges is also calculated and used in estimation.
Alexander Korotkov, heavily modified by me.
The GUC check hooks for transaction_read_only and transaction_isolation
tried to check RecoveryInProgress(), so as to disallow setting read/write
mode or serializable isolation level (respectively) in hot standby
sessions. However, GUC check hooks can be called in many situations where
we're not connected to shared memory at all, resulting in a crash in
RecoveryInProgress(). Among other cases, this results in EXEC_BACKEND
builds crashing during child process start if default_transaction_isolation
is serializable, as reported by Heikki Linnakangas. Protect those calls
by silently allowing any setting when not inside a transaction; which is
okay anyway since these GUCs are always reset at start of transaction.
Also, add a check to GetSerializableTransactionSnapshot() to complain
if we are in hot standby. We need that check despite the one in
check_XactIsoLevel() because default_transaction_isolation could be
serializable. We don't want to complain any sooner than this in such
cases, since that would prevent running transactions at all in such a
state; but a transaction can be run, if SET TRANSACTION ISOLATION is done
before setting a snapshot. Per report some months ago from Robert Haas.
Back-patch to 9.1, since these problems were introduced by the SSI patch.
Kevin Grittner and Tom Lane, with ideas from Heikki Linnakangas
If we revoke a grant option from some role X, but X still holds the option
via another grant, we should not recursively revoke the privilege from
role(s) Y that X had granted it to. This was supposedly fixed as one
aspect of commit 4b2dafcc0b1a579ef5daaa2728223006d1ff98e9, but I must not
have tested it, because in fact that code never worked: it forgot to shift
the grant-option bits back over when masking the bits being revoked.
Per bug #6728 from Daniel German. Back-patch to all active branches,
since this has been wrong since 8.0.
We had put a test for libxml2's xmlStructuredErrorContext variable in
configure, but of course that doesn't work on Windows builds. The next
best alternative seems to be to test the LIBXML_VERSION symbol provided
by xmlversion.h.
Per report from Talha Bin Rizwan, though this fixes it in a different way
than his proposed patch.
The implementation is a quad-tree, largely copied from the quad-tree
implementation for points. The lower and upper bound of ranges are the 2d
coordinates, with some extra code to handle empty ranges.
I left out the support for adjacent operator, -|-, from the original patch.
Not because there was necessarily anything wrong with it, but it was more
complicated than the other operators, and I only have limited time for
reviewing. That will follow as a separate patch.
Alexander Korotkov, reviewed by Jeff Davis and me.
xml_parse() would attempt to fetch external files or URLs as needed to
resolve DTD and entity references in an XML value, thus allowing
unprivileged database users to attempt to fetch data with the privileges
of the database server. While the external data wouldn't get returned
directly to the user, portions of it could be exposed in error messages
if the data didn't parse as valid XML; and in any case the mere ability
to check existence of a file might be useful to an attacker.
The ideal solution to this would still allow fetching of references that
are listed in the host system's XML catalogs, so that documents can be
validated according to installed DTDs. However, doing that with the
available libxml2 APIs appears complex and error-prone, so we're not going
to risk it in a security patch that necessarily hasn't gotten wide review.
So this patch merely shuts off all access, causing any external fetch to
silently expand to an empty string. A future patch may improve this.
In HEAD and 9.2, also suppress warnings about undefined entities, which
would otherwise occur as a result of not loading referenced DTDs. Previous
branches don't show such warnings anyway, due to different error handling
arrangements.
Credit to Noah Misch for first reporting the problem, and for much work
towards a solution, though this simplistic approach was not his preference.
Also thanks to Daniel Veillard for consultation.
Security: CVE-2012-3489
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
century specifications just like positive/AD centuries. Previously the
behavior was either wrong or inconsistent with positive/AD handling.
Centuries without years now always assume the first year of the century,
which is now documented.
DecodeInterval() failed to honor the "range" parameter (the special SQL
syntax for indicating which fields appear in the literal string) if the
time was signed. This seems inappropriate, so make it work like the
not-signed case. The inconsistency was introduced in my commit
f867339c0148381eb1d01f93ab5c79f9d10211de, which as noted in its log message
was only really focused on making SQL-compliant literals work per spec.
Including a sign here is not per spec, but if we're going to allow it
then it's reasonable to expect it to work like the not-signed case.
Also, remove bogus setting of tmask, which caused subsequent processing to
think that what had been given was a timezone and not an hh:mm(:ss) field,
thus confusing checks for redundant fields. This seems to be an aboriginal
mistake in Lockhart's commit 2cf1642461536d0d8f3a1cf124ead0eac04eb760.
Add regression test cases to illustrate the changed behaviors.
Back-patch as far as 8.4, where support for spec-compliant interval
literals was added.
Range problem reported and diagnosed by Amit Kapila, tmask problem by me.
The initially implemented syntax, "CHECK NO INHERIT (expr)" was not
deemed very good, so switch to "CHECK (expr) NO INHERIT" instead. This
way it looks similar to SQL-standards compliant constraint attribute.
Backport to 9.2 where the new syntax and feature was introduced.
Per discussion.
Commit 3855968f328918b6cd1401dd11d109d471a54d40 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
Functions like range_eq, range_before etc. are exposed at the SQL-level, but
they're also used internally by the GiST consistent support function. The
code sharing was done by a hack, TrickFunctionCall2, which relied on the
knowledge that all the functions used fn_extra the same way. This commit
splits the functions into internal versions that take a TypeCacheEntry as
argument, and thin wrappers to expose the functions at the SQL-level. The
internal versions can then be called directly and in a less hacky way from
the GiST consistent function.
This is just cosmetic, but backpatch to 9.2 anyway, to avoid having a
different version of this code in the 9.2 branch. That would make
backpatching fixes in this area more difficult.
Alexander Korotkov
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
Management of timeouts was getting a little cumbersome; what we
originally had was more than enough back when we were only concerned
about deadlocks and query cancel; however, when we added timeouts for
standby processes, the code got considerably messier. Since there are
plans to add more complex timeouts, this seems a good time to introduce
a central timeout handling module.
External modules register their timeout handlers during process
initialization, and later enable and disable them as they see fit using
a simple API; timeout.c is in charge of keeping track of which timeouts
are in effect at any time, installing a common SIGALRM signal handler,
and calling setitimer() as appropriate to ensure timely firing of
external handlers.
timeout.c additionally supports pluggable modules to add their own
timeouts, though this capability isn't exercised anywhere yet.
Additionally, as of this commit, walsender processes are aware of
timeouts; we had a preexisting bug there that made those ignore SIGALRM,
thus being subject to unhandled deadlocks, particularly during the
authentication phase. This has already been fixed in back branches in
commit 0bf8eb2a, which see for more details.
Main author: Zoltán Böszörményi
Some review and cleanup by Álvaro Herrera
Extensive reworking by Tom Lane
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
rfree() failed to cope with the case that pg_regcomp() had initialized the
regex_t struct but then failed to allocate any memory for re->re_guts (ie,
the first malloc call in pg_regcomp() failed). It would try to touch the
guts struct anyway, and thus dump core. This is a sufficiently narrow
corner case that it's not surprising it's never been seen in the field;
but still a bug is a bug, so patch all active branches.
Noted while investigating whether we need to call pg_regfree after a
failure return from pg_regcomp. Other than this bug, it turns out we
don't, so adjust comments appropriately.
These functions support removing or replacing array element value(s)
matching a given search value. Although intended mainly to support a
future array-foreign-key feature, they seem useful in their own right.
Marco Nenciarini and Gabriele Bartolini, reviewed by Alex Hunsaker
To generate btree-indexable conditions from regex WHERE conditions (such as
WHERE indexed_col ~ '^foo'), we need to be able to identify any fixed
prefix that a regex might have; that is, find any string that must be a
prefix of all strings satisfying the regex. We used to do that with
entirely ad-hoc code that looked at the source text of the regex. It
didn't know very much about regex syntax, which mostly meant that it would
fail to identify some optimizable cases; but Viktor Rosenfeld reported that
it would produce actively wrong answers for quantified parenthesized
subexpressions, such as '^(foo)?bar'. Rather than trying to extend the
ad-hoc code to cover this, let's get rid of it altogether in favor of
identifying prefixes by examining the compiled form of a regex.
To do this, I've added a new entry point "pg_regprefix" to the regex library;
hopefully it is defined in a sufficiently general fashion that it can remain
in the library when/if that code gets split out as a standalone project.
Since this bug has been there for a very long time, this fix needs to get
back-patched. However it depends on some other recent commits (particularly
the addition of wchar-to-database-encoding conversion), so I'll commit this
separately and then go to work on back-porting the necessary fixes.
Previously, pattern_fixed_prefix() was defined to return whatever fixed
prefix it could extract from the pattern, plus the "rest" of the pattern.
That definition was sensible for LIKE patterns, but not so much for
regexes, where reconstituting a valid pattern minus the prefix could be
quite tricky (certainly the existing code wasn't doing that correctly).
Since the only thing that callers ever did with the "rest" of the pattern
was to pass it to like_selectivity() or regex_selectivity(), let's cut out
the middle-man and just have pattern_fixed_prefix's subroutines do this
directly. Then pattern_fixed_prefix can return a simple selectivity
number, and the question of how to cope with partial patterns is removed
from its API specification.
While at it, adjust the API spec so that callers who don't actually care
about the pattern's selectivity (which is a lot of them) can pass NULL for
the selectivity pointer to skip doing the work of computing a selectivity
estimate.
This patch is only an API refactoring that doesn't actually change any
processing, other than allowing a little bit of useless work to be skipped.
However, it's necessary infrastructure for my upcoming fix to regex prefix
extraction, because after that change there won't be any simple way to
identify the "rest" of the regex, not even to the low level of fidelity
needed by regex_selectivity. We can cope with that if regex_fixed_prefix
and regex_selectivity communicate directly, but not if we have to work
within the old API. Hence, back-patch to all active branches.
We can do this without creating an API break for estimation functions
by passing the collation using the existing fmgr functionality for
passing an input collation as a hidden parameter.
The need for this was foreseen at the outset, but we didn't get around to
making it happen in 9.1 because of the decision to sort all pg_statistic
histograms according to the database's default collation. That meant that
selectivity estimators generally need to use the default collation too,
even if they're estimating for an operator that will do something
different. The reason it's suddenly become more interesting is that
regexp interpretation also uses a collation (for its LC_TYPE not LC_COLLATE
property), and we no longer want to use the wrong collation when examining
regexps during planning. It's not that the selectivity estimate is likely
to change much from this; rather that we are thinking of caching compiled
regexps during planner estimation, and we won't get the intended benefit
if we cache them with a different collation than the executor will use.
Back-patch to 9.1, both because the regexp change is likely to get
back-patched and because we might as well get this right in all
collation-supporting branches, in case any third-party code wants to
rely on getting the collation. The patch turns out to be minuscule
now that I've done it ...
This is infrastructure for Alexander Korotkov's work on indexing regular
expression searches.
Alexander Korotkov, with a bit of further hackery on the MULE conversion
by me
This commit improves the comments in pg_wchar.h and creates #define symbols
for some formerly hard-coded values. No substantive code changes.
Tatsuo Ishii and Tom Lane
A thinko in commit 029dfdf1157b6d837a7b7211cd35b00c6bcd767c caused the year
519 to be handled differently from either adjacent year, which was not the
intention AFAICS. Report and diagnosis by Marc Cousin.
In passing, remove redundant re-tests of year value.
When (re) loading the typcache comparison cache for an enum type's values,
use an up-to-date MVCC snapshot, not the transaction's existing snapshot.
This avoids problems if we encounter an enum OID that was created since our
transaction started. Per report from Andres Freund and diagnosis by Robert
Haas.
To ensure this is safe even if enum comparison manages to get invoked
before we've set a transaction snapshot, tweak GetLatestSnapshot to
redirect to GetTransactionSnapshot instead of throwing error when
FirstSnapshotSet is false. The existing uses of GetLatestSnapshot (in
ri_triggers.c) don't care since they couldn't be invoked except in a
transaction that's already done some work --- but it seems just conceivable
that this might not be true of enums, especially if we ever choose to use
enums in system catalogs.
Note that the comparable coding in enum_endpoint and enum_range_internal
remains GetTransactionSnapshot; this is perhaps debatable, but if we
changed it those functions would have to be marked volatile, which doesn't
seem attractive.
Back-patch to 9.1 where ALTER TYPE ADD VALUE was added.
A similar change was made previously for pg_cancel_backend, so now it
all matches again.
Dan Farina, reviewed by Fujii Masao, Noah Misch, and Jeff Davis,
with slight kibitzing on the doc changes by me.
There was a wild mix of calling conventions: Some were declared to
return void and didn't return, some returned an int exit code, some
claimed to return an exit code, which the callers checked, but
actually never returned, and so on.
Now all of these functions are declared to return void and decorated
with attribute noreturn and don't return. That's easiest, and most
code already worked that way.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
