First step: Find all constructors/derivations, mark
all of them.
Removed two-value-constructors, adapted code as needed
Reduced constructors for SdrModel/FmFormModel
to a single one.
Removed PathName for List creation, this is not
needed and anyways all calls used the default
SvtPathOptions().GetPalettePath(). This is also
true for usage of IsFuzzing() that is also part
of the default creation process (without path).
All usages that need an extra-List were setting
it after construction explicitely.
Removed UseExtColorTable. This prevents a single
List to be not created by default, the ColorTable
which is replaced later by all callers that used
this. This is not needed since the default
ColorTable gets constructed just by default, no
expensive stuff is triggered (e.g. loading the
ColorTable). Thus now a default ColorTable is
created and kept for a short moment, destructed
again when a ColorTable is explicitely set.
Doing so is also more safe - it avoids not
creating a default-ColorTable and then not setting
one (what would be urgently required).
f23c24a8548d5246b77b1cc359ba89564538e81a
f124468c3898c5842d37123bdeb87d79a2b19c62
Change-Id: I865de4bb23f673c6684d83c2c6390439506dc5b6
Reviewed-on: https://gerrit.libreoffice.org/55028
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
(*) if we are already throwing a Wrapped*Exception, get the
exception using cppu::getCaughtexception.
(*) when catching and then immediately throwing UNO exceptions,
use cppu::getCaughtException to prevent exception slicing
(*) if we are going to catch an exception and then
immediately throw a RuntimeException, rather throw a
WrappedTargetRuntimeException and preserve the original exception information.
Change-Id: Ia7a501a50ae0e6f4d05186333c8517fdcb17d558
Reviewed-on: https://gerrit.libreoffice.org/54692
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
Also simplify parent/child relationships, get rid
of double data (SdrPage/Parent infos in SdrObjects,
also in SdrObjList). This is all not needed - when a
SdrObject is inserted to a SdrPage, get SdrPage by
traveling over parents (no double info, member as soon
as inserted, ...).
More cleanups/reworks included, will need some more
cleanups, too.
Stabilizing: SetRectsDirty/DefaultStyleSheet
Had to correct the SetRectsDirty stuff for 3D due to
going down the hierarchy while the 2D implementation
goes the other direction -> endless loops. Added special
handling for 3D stuff for now (will be chnaged again when
SnapRect is no longer needed at SdrObject level).
Also had to adapt how the DefaultStyleSheet is set at
incarnated SdrObjects - better: their properties. Since
we now always have a SdrModel, it is possible to correctly
initialize with the correct default StyleSheet from that
SdrModel.
This needs to be done after ForceDefaultAttributes and in a
way that again deletes Items that are set in the StyleSheet.
This leads to an error in CppunitTest_sd_import_tests where
I checked tdf100491 - it is okay and thus I change the control
instance of the imported, XML-dumped file.
The less hard attributes, the better for Styles in general.
Cleanup of comments for last two commits
Corrected SvxShape::getParent()
Needed to get the direct parent, so test for SdrObject
first (to get SdrObjGroup/E3DScene), for SdrPage second
Fixed CppunitTest_sc_subsequent_export_test
Several problems arose. The used SdrCaptionObj was
Cloned, but the clone not inserted to a SdrPage. This
leads to not being able to access a UNO API imlementation
of the SdrPage (SvxPage) on lower levels.
It worked before due to SdrObject having a SdrPage*
additionally to being added to a SdrPage - this is exactly
the main cleanup this change does.
Looked for why it is cloned, could see no reasons. The
SdrCaptionObj exists during all im/export, not difference
to other SdrObjects (that do not get cloned). It is not
changed in any way. It *might* be to suppress a crash that
happened due to UNO API Service emfio/emfio not being
available in the UnitTest scenario. Interestingly it
did not crash with the cloned SdrCaptionObj, but the
Graphic exported was probably wrong.
Fixed by no longer Cloning the SdrCaptionObj and adding
emfio/emfio UNO API Service.
d139f821a5b39535a3e7b9c6261df7e18f8ae8ac
910e7f4bc628a715fda7545dffaf3369d5e76ea0
ca1de01b723051e09ac37d7ec7bba978beea41c5
3a76da1471dfe75e69847f64a6a3519ad21c8c9c
Change-Id: I986586e326b563acebf00d931a7084c6eb09e5f8
Reviewed-on: https://gerrit.libreoffice.org/54689
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
Found with bin/find-unneeded-includes
Only removal proposals are dealt with here
A bit of fallout management was necessary as well
find-unneeded-includes gave no proposals for chart2/inc
Change-Id: Id382586f575cf45da758da453df9340b28e9ddd0
Reviewed-on: https://gerrit.libreoffice.org/54778
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Miklos Vajna <vmiklos@collabora.co.uk>
Chart context menu was misplaced since the context menu expects a
position related to the document window not to the chart window.
Moreover map mode is not enabled for chart window, that leads to use
the LogicToLogic routine which unfortunately provides a wrong pixel to
twips conversion. In fact we gets a 20 twips per pixel conversion
since LogicToLogic uses a fixed 72 dpi value, instead of a correctly
computed output device real dpi or at least the most commonly used 96
dpi value.
Change-Id: Idb4220d03fddd4b6d643c1c0fb52754bafed7e36
Reviewed-on: https://gerrit.libreoffice.org/53118
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
Tested-by: Jan Holesovsky <kendy@collabora.com>
Reviewed-on: https://gerrit.libreoffice.org/54649
Reviewed-on: https://gerrit.libreoffice.org/54655
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Marco Cecchetti <mrcekets@gmail.com>
Renamed SdrPage::Clone -> SdrPage::CloneSdrPage
Renamed SdrObject::Clone -> SdrObject::CloneSdrObject
Giving SdrModel is no longer an option, but a must (as
reference). This makes future changes more safe by force
usage to think about it. Also equals the constructors
which already require a target SdrModel.
Done the same for ::CloneSdrPage.
Change-Id: I06f0129e15140bd8693db27a445037d7e2f7f652
Reviewed-on: https://gerrit.libreoffice.org/53933
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
This adds back the implementation for setting the SymbolBitmapURL
property (getting returns an empty string) and adds SymbolBitmap
property to the UNO API (LineDiagram.idl).
SymbolBitmapURL property was already deprecated, but we still need
to add the SymbolBitmap for compatibility.
[ Miklos Vajna: updated qadevOOo tests to handle the new write-only
properties. ]
Change-Id: Id00d78299b7fd5ba9d78c36c5f03a10d9e61c60a
Reviewed-on: https://gerrit.libreoffice.org/53492
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Miklos Vajna <vmiklos@collabora.co.uk>
XGraphicObjectResolver was used to get the GraphicObject URL from
an storage (package) URL. This isn't possible anymore in LO 6.1
since creating GraphicObject from uniqueID was removed for its
lifecycle issues. XGraphicObjectResolver is now deprecated and
when the "resolveGraphicObjectURL" is called, it throws a
RuntimeExeption.
In places where XGraphicObjectResolver was used, we now use the
XGraphicStorageHandler as the alternative. Both share a common
implementation so previously we could cast one to the other at
any time. Now only XGraphicStorageHandler is used.
GraphicObjectResolver was removed and replaced by the alternative
GraphicStorageHandler for instance creation - where needed.
Change-Id: I5d3f759c6f95b7dbe2d93688d99c8aa4899ffa84
Reviewed-on: https://gerrit.libreoffice.org/53279
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
Tested-by: Tomaž Vajngerl <quikee@gmail.com>
This reverts commit 81ce629c9e8a4fc26ded9d49157e3f3263991e03, now that
<https://bugs.llvm.org/show_bug.cgi?id=25641> "clang-cl: vtordisp thunks not
emitted for functions with class template specializations in their signatures"
is fixed.
so a SfxTabPage can be parented by a vcl::Window or a welded native notebook tabpage.
That ways the same SfxTabPage can be used at the same time in both a native dialog
or a vcl dialog. The impl can be changed to the weld api, and when hosted in a native
dialog the vcl impl of that will be instantiated, while native otherwise. e.g.
print options appearing in print options dialog and general options.
This allows incremental changeover.
Change-Id: I6f1fed1e8d0898b01853bb878757bad41cbf9bba
Reviewed-on: https://gerrit.libreoffice.org/53193
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
E3DObjList is not needed, remove. Remove memeber from
E3DObject, derive E3DScene directly from SdrObjList, some
cleanups in SdrObject, too
Change-Id: Ifa4620a800c14faf21f8b80fd4dc1d39f71be804
Reviewed-on: https://gerrit.libreoffice.org/52740
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
This reverts commit 8bc951daf79decbd8a599a409c6d33c5456710e0.
As discussed at
<https://lists.freedesktop.org/archives/libreoffice/2018-April/079955.html>
"long->sal_Int32 in tools/gen.hxx", that commit caused lots of problems with
signed integer overflow, and the original plan was to redo it to consistently
use sal_Int64 instead of sal_Int32. <https://gerrit.libreoffice.org/#/c/52471/>
"sal_Int32->sal_Int64 in tools/gen.hxx" tried that. However, it failed
miserably on Windows, causing odd failures like not writing out Pictures/*.svm
streams out into .odp during CppunitTest_sd_export_ooxml2. So the next best
approach is to just revert the original commit, at least for now.
Includes revert of follow-up 8c50aff2175e85c54957d98ce32af40a3a87e168 "Fix
Library_vclplug_qt5".
Change-Id: Ia8bf34272d1ed38aac00e5d07a9d13fb03f439ae
Reviewed-on: https://gerrit.libreoffice.org/52532
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
SOSAW080: Make SdrModel& prerequisite to SdrObjects
Added need for SdrModel& in constructors of SdrModel,
SdrPage, SdrView and SdrObjList. Builds, not finished.
SOSAW080: removed and replaced old SdrModel
Removed and replaced GetModel()/SetModel() in all using
classes (SdrObject, SdrPage, SdrView), added accessors
to new referenced SdrModel, adapted all accessing places.
Refactored/Extended ::Clone and ::operator== for these
classes to allow cloning objects to a target SdrModel.
Adapted places where this is done AFAP. Added quite some
comments (tagged with 'TTTT') where possible further work
is needed. Builds completely, thus checking in. This does
not mean that this change is done yet.
SOSAW080: Adapted SdrPage/SdrModel relationship
Also needed to work on copy-construction of SdrPage and hierarchy,
quite some stuff removed, no copy-constructor anymore, no
MigrateItemPool stuff. Builds well, test stuck, will need
some cleanup/finetunung
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Debugging/Stabilizing/MakeUnitTestWork
SOSAW080: Stabilized for UnitTests, cleanups
SOSAW080: Adapted GetObjGraphic to just take a const SdrObject&
SOSAW080: Removed ChangeModel from classes
Classes SvxTextEditSource and SvxDrawPage (including
TextEditSource stuff) do not need change of SdrModel
anymore.
SOSAW080: Adapted some comments to make more readable
SOSAW080: Corrected constructor
SOSAW080: getSdrModelFromUnoModel added override marks
SOSAW080: Added missing includes
SOSAW080: Corrected SdrPage constructor
SOSAW080: Corrected some SdrObject::Clone scenarios
Especially when cloning to another SdrModel and taking
the sdr::properties into account.
SOSAW080: Added include for Mac-Build
SOSAW080: Added Scale to DefaultProperties
If a SdrModel change happens in DefaultProperties copy
constructor (used from Clone()), potentially a Scale
for the SfxItems has to be done.
SOSAW080: Added missing include for MacBuild
SOSAW080: Corrected CppunitTest_sc_anchor_test
An adaption of a SdrPathObj instantiation was missing,
added that. Seems as if that test is no tpart of the
usual 'make' scenario, but used/executed in gerrit builds
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Free SdrObjects when SdrModel goes down
In an UNO API test problem is that SvxShapes reference
SdrShapes, but these are not added to a SdrPage and not
'owned' by the SvxShape. Thus these do not get deleted
at all (same in master, memory leak). I extended
SvxShape::Notify the case for ModelCleared to also
Free the SdrObject when not owner and it's not added to
a SdrPage (in that case it gets deleted with deleting
the SdrModel)
SOSAW080: Solve UNO API calls that move SvxShapes to other Model
Due to UNO API tests I got a call to insert an xShape to a
xDrawPage which was constructed in another Model, this has now to
be done by Cloning the SdrObject to the new SdrModel, getting
rid of the old one and getting all the UNO implementation
stuff right (referemces SdrObject <-> xShape).
1cb7d573d323e98a89761fe662c10c4a654fdec0
24617494a0ef79f6e33dfcb02782a833a81c6434
763f39094b6a48b529a6952d01468f8776c97679
242b9e228a9a042c3a5bdd38b1ea6600144276d5
242b9e228a9a042c3a5bdd38b1ea6600144276d5
33a6f3f306b70c223171aef796dd5ee041ad14df
6878b33f8b05738a44c0910e40a60a0f0d1d58ed
0a636caf3cb36c2f9c6cd11aa22cb9bc435dc8f2
8c4626274a5cc531dad27f27c0c45d4c528fb2fb
446685a49a6d67aedd01cfbbd5e87b07f97a4d7b
c1b5ed3c99bc7219a0061e4ece24ea42afd2889a
22de9a1c8af7c25be5c108671ddc548ba323ed47
4caf6b6fbbe6e8130741d793dffb560fd01d4ed5
488b9601735ec1822433f82f633990063951fe08
c366d60299f239e3df856ddffedb19e743e4be0c
c5137ba8c597c7b5f90318df50e87b93a39a28dc
f9e646242cf89f6fde1315046952252a2c429779
f830fbc5fadd89d04be5edd2a5abf9b0d4bf0410
1694b54903df784385abaa8452e1201e12344238
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
7b5c241faec7488924e5935ae8b19f785846b5e4
bf097ee7467895823fbd158a2a9543da3b5a5078
Change-Id: Iaf53535de0502a481466be74a1768bbb39f0e78c
Reviewed-on: https://gerrit.libreoffice.org/52526
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
SOSAW080: Make SdrModel& prerequisite to SdrObjects
Added need for SdrModel& in constructors of SdrModel,
SdrPage, SdrView and SdrObjList. Builds, not finished.
SOSAW080: removed and replaced old SdrModel
Removed and replaced GetModel()/SetModel() in all using
classes (SdrObject, SdrPage, SdrView), added accessors
to new referenced SdrModel, adapted all accessing places.
Refactored/Extended ::Clone and ::operator== for these
classes to allow cloning objects to a target SdrModel.
Adapted places where this is done AFAP. Added quite some
comments (tagged with 'TTTT') where possible further work
is needed. Builds completely, thus checking in. This does
not mean that this change is done yet.
SOSAW080: Adapted SdrPage/SdrModel relationship
Also needed to work on copy-construction of SdrPage and hierarchy,
quite some stuff removed, no copy-constructor anymore, no
MigrateItemPool stuff. Builds well, test stuck, will need
some cleanup/finetunung
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Debugging/Stabilizing/MakeUnitTestWork
SOSAW080: Stabilized for UnitTests, cleanups
SOSAW080: Adapted GetObjGraphic to just take a const SdrObject&
SOSAW080: Removed ChangeModel from classes
Classes SvxTextEditSource and SvxDrawPage (including
TextEditSource stuff) do not need change of SdrModel
anymore.
SOSAW080: Adapted some comments to make more readable
SOSAW080: Corrected constructor
SOSAW080: getSdrModelFromUnoModel added override marks
SOSAW080: Added missing includes
SOSAW080: Corrected SdrPage constructor
SOSAW080: Corrected some SdrObject::Clone scenarios
Especially when cloning to another SdrModel and taking
the sdr::properties into account.
SOSAW080: Added include for Mac-Build
SOSAW080: Added Scale to DefaultProperties
If a SdrModel change happens in DefaultProperties copy
constructor (used from Clone()), potentially a Scale
for the SfxItems has to be done.
SOSAW080: Added missing include for MacBuild
SOSAW080: Corrected CppunitTest_sc_anchor_test
An adaption of a SdrPathObj instantiation was missing,
added that. Seems as if that test is no tpart of the
usual 'make' scenario, but used/executed in gerrit builds
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Free SdrObjects when SdrModel goes down
In an UNO API test problem is that SvxShapes reference
SdrShapes, but these are not added to a SdrPage and not
'owned' by the SvxShape. Thus these do not get deleted
at all (same in master, memory leak). I extended
SvxShape::Notify the case for ModelCleared to also
Free the SdrObject when not owner and it's not added to
a SdrPage (in that case it gets deleted with deleting
the SdrModel)
SOSAW080: Solve UNO API calls that move SvxShapes to other Model
Due to UNO API tests I got a call to insert an xShape to a
xDrawPage which was constructed in another Model, this has now to
be done by Cloning the SdrObject to the new SdrModel, getting
rid of the old one and getting all the UNO implementation
stuff right (referemces SdrObject <-> xShape).
Change-Id: Iaf53535de0502a481466be74a1768bbb39f0e78c
1cb7d573d323e98a89761fe662c10c4a654fdec0
24617494a0ef79f6e33dfcb02782a833a81c6434
763f39094b6a48b529a6952d01468f8776c97679
242b9e228a9a042c3a5bdd38b1ea6600144276d5
242b9e228a9a042c3a5bdd38b1ea6600144276d5
33a6f3f306b70c223171aef796dd5ee041ad14df
6878b33f8b05738a44c0910e40a60a0f0d1d58ed
0a636caf3cb36c2f9c6cd11aa22cb9bc435dc8f2
8c4626274a5cc531dad27f27c0c45d4c528fb2fb
446685a49a6d67aedd01cfbbd5e87b07f97a4d7b
c1b5ed3c99bc7219a0061e4ece24ea42afd2889a
22de9a1c8af7c25be5c108671ddc548ba323ed47
4caf6b6fbbe6e8130741d793dffb560fd01d4ed5
488b9601735ec1822433f82f633990063951fe08
c366d60299f239e3df856ddffedb19e743e4be0c
c5137ba8c597c7b5f90318df50e87b93a39a28dc
f9e646242cf89f6fde1315046952252a2c429779
f830fbc5fadd89d04be5edd2a5abf9b0d4bf0410
1694b54903df784385abaa8452e1201e12344238
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
7b5c241faec7488924e5935ae8b19f785846b5e4
bf097ee7467895823fbd158a2a9543da3b5a5078
and SmSymDefineDialog
There's a whole bunch of interrelated stuff which needs to work at the same
time.
add menu support, keyboard support, better mouse support,
a gtk scrollable adaptor to support pseudo scrolling drawing bodge,
plugable uitest support for custom widgets, plugable a11y support
for custom widgets via the existing atk_object_wrapper_new wrapper
for XAccessible
In this specific case, change SvxCharacterMap from something that has an
internal scrollbar to a scrolledwindow where the scrollbar is external, which
drops the need for the a11y impl of SvxCharacterMap to emulate being a scrolled
window and internal table and just needs the table a11y impl
Change-Id: Ia2743d6958021c525a1900154dcbb69ae33fc400
Reviewed-on: https://gerrit.libreoffice.org/52084
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
This is preparing to change how GraphicManager works where it
won't base itself around GraphicObject anymore but Graphic. No
functional or cosmetic change was made to the classes, only
changes that were needed because of the move and rename.
The only thing that wasn't moved is the GraphicRenderer as it
is not needed in vcl for now (but makes sense to move it in the
future to keep graphic stuff together).
grfmgr was renamed to GraphicObject as the GraphicManager will be
changed a lot and most likely moved out, so the name grfmgr won't
make any sense anymore.
All the UNO implementations were renamed with a prefix Uno and
used the same name as the class name. This is made to be more
specific which are the Uno objects (for example graphic.cxx
contained the implementation of XGraphic, which is similar to
graph.cxx contains Graphic).
Change-Id: I54a2fa6c7e997469aaa7770db05244adb9f64137
Reviewed-on: https://gerrit.libreoffice.org/51068
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
