Import abseil-cpp to third_party

Renamed abseil modules to make them webrtc specific.
Restricted visibility of abseil modules to webrtc packages.

Bug: 171836454
Test: Builds

Change-Id: Icf24c7e3093a77dd9a26e7ec78bd531eb1ad3dec

third_party/abseil-cpp/absl/base/internal/spinlock.cc

@@ -0,0 +1,233 @@
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include "absl/base/internal/spinlock.h"
+
+#include <algorithm>
+#include <atomic>
+#include <limits>
+
+#include "absl/base/attributes.h"
+#include "absl/base/internal/atomic_hook.h"
+#include "absl/base/internal/cycleclock.h"
+#include "absl/base/internal/spinlock_wait.h"
+#include "absl/base/internal/sysinfo.h" /* For NumCPUs() */
+#include "absl/base/call_once.h"
+
+// Description of lock-word:
+//  31..00: [............................3][2][1][0]
+//
+//     [0]: kSpinLockHeld
+//     [1]: kSpinLockCooperative
+//     [2]: kSpinLockDisabledScheduling
+// [31..3]: ONLY kSpinLockSleeper OR
+//          Wait time in cycles >> PROFILE_TIMESTAMP_SHIFT
+//
+// Detailed descriptions:
+//
+// Bit [0]: The lock is considered held iff kSpinLockHeld is set.
+//
+// Bit [1]: Eligible waiters (e.g. Fibers) may co-operatively reschedule when
+//          contended iff kSpinLockCooperative is set.
+//
+// Bit [2]: This bit is exclusive from bit [1].  It is used only by a
+//          non-cooperative lock.  When set, indicates that scheduling was
+//          successfully disabled when the lock was acquired.  May be unset,
+//          even if non-cooperative, if a ThreadIdentity did not yet exist at
+//          time of acquisition.
+//
+// Bit [3]: If this is the only upper bit ([31..3]) set then this lock was
+//          acquired without contention, however, at least one waiter exists.
+//
+//          Otherwise, bits [31..3] represent the time spent by the current lock
+//          holder to acquire the lock.  There may be outstanding waiter(s).
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace base_internal {
+
+ABSL_INTERNAL_ATOMIC_HOOK_ATTRIBUTES static base_internal::AtomicHook<void (*)(
+    const void *lock, int64_t wait_cycles)>
+    submit_profile_data;
+
+void RegisterSpinLockProfiler(void (*fn)(const void *contendedlock,
+                                         int64_t wait_cycles)) {
+  submit_profile_data.Store(fn);
+}
+
+// Uncommon constructors.
+SpinLock::SpinLock(base_internal::SchedulingMode mode)
+    : lockword_(IsCooperative(mode) ? kSpinLockCooperative : 0) {
+  ABSL_TSAN_MUTEX_CREATE(this, __tsan_mutex_not_static);
+}
+
+SpinLock::SpinLock(base_internal::LinkerInitialized,
+                   base_internal::SchedulingMode mode) {
+  ABSL_TSAN_MUTEX_CREATE(this, 0);
+  if (IsCooperative(mode)) {
+    InitLinkerInitializedAndCooperative();
+  }
+  // Otherwise, lockword_ is already initialized.
+}
+
+// Static (linker initialized) spinlocks always start life as functional
+// non-cooperative locks.  When their static constructor does run, it will call
+// this initializer to augment the lockword with the cooperative bit.  By
+// actually taking the lock when we do this we avoid the need for an atomic
+// operation in the regular unlock path.
+//
+// SlowLock() must be careful to re-test for this bit so that any outstanding
+// waiters may be upgraded to cooperative status.
+void SpinLock::InitLinkerInitializedAndCooperative() {
+  Lock();
+  lockword_.fetch_or(kSpinLockCooperative, std::memory_order_relaxed);
+  Unlock();
+}
+
+// Monitor the lock to see if its value changes within some time period
+// (adaptive_spin_count loop iterations). The last value read from the lock
+// is returned from the method.
+uint32_t SpinLock::SpinLoop() {
+  // We are already in the slow path of SpinLock, initialize the
+  // adaptive_spin_count here.
+  ABSL_CONST_INIT static absl::once_flag init_adaptive_spin_count;
+  ABSL_CONST_INIT static int adaptive_spin_count = 0;
+  base_internal::LowLevelCallOnce(&init_adaptive_spin_count, []() {
+    adaptive_spin_count = base_internal::NumCPUs() > 1 ? 1000 : 1;
+  });
+
+  int c = adaptive_spin_count;
+  uint32_t lock_value;
+  do {
+    lock_value = lockword_.load(std::memory_order_relaxed);
+  } while ((lock_value & kSpinLockHeld) != 0 && --c > 0);
+  return lock_value;
+}
+
+void SpinLock::SlowLock() {
+  uint32_t lock_value = SpinLoop();
+  lock_value = TryLockInternal(lock_value, 0);
+  if ((lock_value & kSpinLockHeld) == 0) {
+    return;
+  }
+  // The lock was not obtained initially, so this thread needs to wait for
+  // it.  Record the current timestamp in the local variable wait_start_time
+  // so the total wait time can be stored in the lockword once this thread
+  // obtains the lock.
+  int64_t wait_start_time = CycleClock::Now();
+  uint32_t wait_cycles = 0;
+  int lock_wait_call_count = 0;
+  while ((lock_value & kSpinLockHeld) != 0) {
+    // If the lock is currently held, but not marked as having a sleeper, mark
+    // it as having a sleeper.
+    if ((lock_value & kWaitTimeMask) == 0) {
+      // Here, just "mark" that the thread is going to sleep.  Don't store the
+      // lock wait time in the lock as that will cause the current lock
+      // owner to think it experienced contention.
+      if (lockword_.compare_exchange_strong(
+              lock_value, lock_value | kSpinLockSleeper,
+              std::memory_order_relaxed, std::memory_order_relaxed)) {
+        // Successfully transitioned to kSpinLockSleeper.  Pass
+        // kSpinLockSleeper to the SpinLockWait routine to properly indicate
+        // the last lock_value observed.
+        lock_value |= kSpinLockSleeper;
+      } else if ((lock_value & kSpinLockHeld) == 0) {
+        // Lock is free again, so try and acquire it before sleeping.  The
+        // new lock state will be the number of cycles this thread waited if
+        // this thread obtains the lock.
+        lock_value = TryLockInternal(lock_value, wait_cycles);
+        continue;   // Skip the delay at the end of the loop.
+      }
+    }
+
+    base_internal::SchedulingMode scheduling_mode;
+    if ((lock_value & kSpinLockCooperative) != 0) {
+      scheduling_mode = base_internal::SCHEDULE_COOPERATIVE_AND_KERNEL;
+    } else {
+      scheduling_mode = base_internal::SCHEDULE_KERNEL_ONLY;
+    }
+    // SpinLockDelay() calls into fiber scheduler, we need to see
+    // synchronization there to avoid false positives.
+    ABSL_TSAN_MUTEX_PRE_DIVERT(this, 0);
+    // Wait for an OS specific delay.
+    base_internal::SpinLockDelay(&lockword_, lock_value, ++lock_wait_call_count,
+                                 scheduling_mode);
+    ABSL_TSAN_MUTEX_POST_DIVERT(this, 0);
+    // Spin again after returning from the wait routine to give this thread
+    // some chance of obtaining the lock.
+    lock_value = SpinLoop();
+    wait_cycles = EncodeWaitCycles(wait_start_time, CycleClock::Now());
+    lock_value = TryLockInternal(lock_value, wait_cycles);
+  }
+}
+
+void SpinLock::SlowUnlock(uint32_t lock_value) {
+  base_internal::SpinLockWake(&lockword_,
+                              false);  // wake waiter if necessary
+
+  // If our acquisition was contended, collect contentionz profile info.  We
+  // reserve a unitary wait time to represent that a waiter exists without our
+  // own acquisition having been contended.
+  if ((lock_value & kWaitTimeMask) != kSpinLockSleeper) {
+    const uint64_t wait_cycles = DecodeWaitCycles(lock_value);
+    ABSL_TSAN_MUTEX_PRE_DIVERT(this, 0);
+    submit_profile_data(this, wait_cycles);
+    ABSL_TSAN_MUTEX_POST_DIVERT(this, 0);
+  }
+}
+
+// We use the upper 29 bits of the lock word to store the time spent waiting to
+// acquire this lock.  This is reported by contentionz profiling.  Since the
+// lower bits of the cycle counter wrap very quickly on high-frequency
+// processors we divide to reduce the granularity to 2^PROFILE_TIMESTAMP_SHIFT
+// sized units.  On a 4Ghz machine this will lose track of wait times greater
+// than (2^29/4 Ghz)*128 =~ 17.2 seconds.  Such waits should be extremely rare.
+enum { PROFILE_TIMESTAMP_SHIFT = 7 };
+enum { LOCKWORD_RESERVED_SHIFT = 3 };  // We currently reserve the lower 3 bits.
+
+uint32_t SpinLock::EncodeWaitCycles(int64_t wait_start_time,
+                                    int64_t wait_end_time) {
+  static const int64_t kMaxWaitTime =
+      std::numeric_limits<uint32_t>::max() >> LOCKWORD_RESERVED_SHIFT;
+  int64_t scaled_wait_time =
+      (wait_end_time - wait_start_time) >> PROFILE_TIMESTAMP_SHIFT;
+
+  // Return a representation of the time spent waiting that can be stored in
+  // the lock word's upper bits.
+  uint32_t clamped = static_cast<uint32_t>(
+      std::min(scaled_wait_time, kMaxWaitTime) << LOCKWORD_RESERVED_SHIFT);
+
+  if (clamped == 0) {
+    return kSpinLockSleeper;  // Just wake waiters, but don't record contention.
+  }
+  // Bump up value if necessary to avoid returning kSpinLockSleeper.
+  const uint32_t kMinWaitTime =
+      kSpinLockSleeper + (1 << LOCKWORD_RESERVED_SHIFT);
+  if (clamped == kSpinLockSleeper) {
+    return kMinWaitTime;
+  }
+  return clamped;
+}
+
+uint64_t SpinLock::DecodeWaitCycles(uint32_t lock_value) {
+  // Cast to uint32_t first to ensure bits [63:32] are cleared.
+  const uint64_t scaled_wait_time =
+      static_cast<uint32_t>(lock_value & kWaitTimeMask);
+  return scaled_wait_time
+      << (PROFILE_TIMESTAMP_SHIFT - LOCKWORD_RESERVED_SHIFT);
+}
+
+}  // namespace base_internal
+ABSL_NAMESPACE_END
+}  // namespace absl