- Add Flex FEC format as default supported receive codec
- Disallow advertising FlexFEC as video sender codec by default until implementation is complete
- Toggle field trial "WebRTC-FlexFEC-03-Advertised"s behavior for receiver to use as kill-switch to prevent codec advertising
Bug: webrtc:8151
Change-Id: Iff367119263496fb335500e96641669654b45834
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/191947
Commit-Queue: Christoffer Rodbro <crodbro@webrtc.org>
Reviewed-by: Ying Wang <yinwa@webrtc.org>
Reviewed-by: Christoffer Rodbro <crodbro@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32639}
This CL does not aim at cleaning up simulcast/SVC configuration, just to make it possible to set the scalability mode for AV1. Implementing a codec agnostic SVC/simulcast API is a (big) project on its own.
Change-Id: Ia88df31eb1111713e5f8832e95c8db44f92887ca
BUG: webrtc:11607
Change-Id: Ia88df31eb1111713e5f8832e95c8db44f92887ca
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/192541
Reviewed-by: Florent Castelli <orphis@webrtc.org>
Reviewed-by: Christoffer Rodbro <crodbro@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32631}
This can result in a higher max bitrate for the base layer, effectively
causing the minimum bitrate to be 600kbps, which is too high.
Bug: b/173183017
Change-Id: I8b45c1c90ebf10a690420bed79e814f27702a540
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/193702
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Jakob Ivarsson <jakobi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32623}
And use it in a few places that were using RTC_CHECK(false) or FATAL()
to do the exact same job. There should be no change in behavior.
Bug: none
Change-Id: I36d5e6bcf35fd41534e08a8c879fa0811b4f1967
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/191963
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32567}
"warning: control reaches end of non-void function [-Wreturn-type]"
Reported by gcc (8.3)
In all the reported cases, the end of function is never actually
reached. Add RTC_CHECK(false) to ensure the compiler is aware that
this path is a dead-end.
Bug: webrtc:12008
Change-Id: I7f816fde3d1897ed2774057c7e05da66e1895e60
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/189784
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Fabien VALLÉE <fabien.vallee@netgem.com>
Cr-Commit-Position: refs/heads/master@{#32503}
When deinitializing usrsctp, we attempt to call usrsctp_finish in a loop
for three seconds (it may fail because another sctp thread is holding a
reference to something). If the three seconds run out, usrsctp is left
in a still initialized state, and bad things happen down the road if
usrsctp_init is called in the state.
Bug: chromium:1138878
Change-Id: I9c24d51d5a274b06bdf4183261694fc2989136c5
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/189940
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Taylor <deadbeef@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32467}
When processing an INIT for existing SCTP association, which may happen
when transferring to a new remote endpoint, if there are chunks still on
the output queue, an SCTP_SEND_FAILED_EVENT notification will be
delivered while holding the INP lock. When processing this notification,
WebRTC was calling usrsctp_getladdrs in order to look up the
SctpTransport* associated with the socket, but this also tries to
acquire the INP lock, resulting in a deadlock.
The temporary fix is to simply not subscribe to the
SCTP_SEND_FAILED_EVENT notification; it was only used for logging
anyway.
Bug: chromium:1137936
Change-Id: I077efb4c769d6f7855d2fee2d266f19396b16f9d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/188502
Commit-Queue: Taylor <deadbeef@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32427}
This sincludes the SimulcastEncoderAdapter and the
VideoEncoderSoftwareFallbackWrapper. This avoids converting
the frame when that is not needed.
Bug: webrtc:11976
Change-Id: I686725ecfb79c3b8d87d587a907da1602483bfe8
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/187343
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Evan Shrubsole <eshr@google.com>
Cr-Commit-Position: refs/heads/master@{#32389}
(Reland with no changes after the fix to the downstream project)
This can be overriden for kNative frame types to perform scaling efficiently.
Default implementations for existing buffer types require actual
buffer implementation, thus this CL also merges "video_frame"
with "video_frame_I420" build targets.
Originally Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186303
(Landing with TBR as it's unchaged reland of already approved CL)
TBR=nisse@webrtc.org,sakal@webrtc.org
Bug: webrtc:11976, chromium:1132299
Change-Id: Ia23f7d3e474bd9cdc177104cc5c6d772f04b210f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/187345
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32362}
VideoBitrateAllocation is instead reported through the EncoderSink.
Enable VideoBitrateAllocation reporting from WebRtcVideoChannel::AddSendStream in preparation for
using the extension RtpVideoLayersAllocationExtension instead of RTCP XR.
Bug: webrtc:12000
Change-Id: I5ea8e4f237a1c4e84a89cbfd97ac4353d4c2984f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186940
Commit-Queue: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32347}
This reverts commit f5e261aaf65cdf2eb903cdf40d651846be44f447.
Reason for revert: Breaks downstream projects.
Original change's description:
> Introduce RTC_NO_UNIQUE_ADDRESS.
>
> This macro introduces the possibility to suggest the compiler that a
> data member doesn't need an address different from other non static
> data members.
>
> The usage of a macro is to maintain portability since at the moment
> the attribute [[no_unique_address]] is only supported by clang
> with at least -std=c++11 but it should be supported by all the
> compilers starting from C++20.
>
> Bug: webrtc:11495
> Change-Id: I9f12b67b4422a2749649eaa6b004a67d5fd572d8
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/173331
> Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32246}
TBR=mbonadei@webrtc.org,kwiberg@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:11495
Change-Id: Ice318d1b11ca3dff09c190187a0b0a32ca945fe3
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186944
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32335}
Currently, when only max bitrate available and min bitratea & target
bitrate are missing from encoding config, the target bitrate is decided
by the calculation from GetSimulcastConfig() according to width/height/qp.
The max bitrate doesn't play a role here other than ensure target < max.
This will make the target bitrate cap at some calculated number even
when control message gives much larger allocation through max bitrate.
In our cases, the L0 (at 180p) is capped at 80-90kbps even control
message gives L0's max bitrate over 300kbps. This under-use of bandwidth
happens to all layer other than top layer. Top layer will be compensated
with all the left bandwidth up to max at last.
Since in web api, we cannot pass down either min bitrate or target bitrate
(https://developer.mozilla.org/en-US/docs/Web/API/RTCRtpEncodingParameters).
We propose a new logic to take max bitrate into consideration in this case,
use 3/4 max bitrate or calculated target bitrate whichever is larger.
Bug: None
Change-Id: I2234b4636daa379fd47d4bbe764cf8307b9a1ea4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186161
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32308}
API to injecting a heavy audio processing operation into WebRTC audio capture pipeline
Bug: webrtc:12003
Change-Id: I9f6f58f468bd84efd0a9d53d703db6229a03959e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/165788
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Olga Sharonova <olka@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32291}
This macro introduces the possibility to suggest the compiler that a
data member doesn't need an address different from other non static
data members.
The usage of a macro is to maintain portability since at the moment
the attribute [[no_unique_address]] is only supported by clang
with at least -std=c++11 but it should be supported by all the
compilers starting from C++20.
Bug: webrtc:11495
Change-Id: I9f12b67b4422a2749649eaa6b004a67d5fd572d8
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/173331
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32246}
The former was unused, the latter is replaced with the explicit C++11
deletions. The related RTC_DISALLOW_COPY_AND_ASSIGN is left for now,
it is used in a lot more places.
Bug: None
Change-Id: I49503e7f2b9ff43c6285f8695833479bbc18c380
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185500
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32224}
OnSctpInboundPacket is called not only for incoming packets, but for
notifications, which can be delivered on the usrsctp timer thread.
I suspect that these notifications can be delivered after we attempt to
close the socket, because if we attempt to close it while the timer
thread holds a reference, it isn't actually destroyed until the timer
thread finishes its operation.
Bug: chromium:1127774
Change-Id: Id6a883b14796e8f5bf1c2990f3d9d389d72c8a46
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/184240
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Taylor <deadbeef@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32204}
This is a reland of
https://webrtc-review.googlesource.com/c/src/+/174261
Patchset 1 contains the old cl (plus a merge conflict fix).
Later patchets are bufixes: A PeerConnection can be created without a
Call instance (in the case of DataChannel only), so we can't always
use that to fetch the current trials.
Old CL descritpion:
This replaces field_trial:: -based functions from system_wrappers.
Field trials are still used as fallback, but injectable trials are now
possible.
// Since re-land is otherwise unchanged, setting previous reviewers as TBR
TBR=kthelgason@webrtc.org,mbonadei@webrtc.org,stefan@webrtc.org,srte@webrtc.org
Bug: webrtc:11926
Change-Id: I57a9e8c3454f226f77fb93215bcac83da65034b0
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/185003
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32163}
RequestEncoderFallback, RequestEncoderSwitch and
SetVideoCodecSwitchingEnabledRequest are now all called on the
worker thread. Before, the work already happened on that thread but
WebRtcVideoChannel adapted internally when needed.
With this CL, there are thread checks to make sure that these calls are
always made the same way, we don't need the async invoker and there
are fewer calls out from the encoder thread in VideoStreamEncoder
(reducing the chance of unintentional blocking).
Bug: webrtc:11908
Change-Id: If8738bc2a708a0fefc6fe850b32655f049f30bdc
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/184603
Commit-Queue: Tommi <tommi@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32151}
This turned out to be a bit complicated, mostly
related to the tests, but here's what's changed:
* No AsyncInvoker (and avoid ClearInternal) in
WebRtcVideoSendStream (WVSS)
* The reason it was there is due to a "design leak" from
VideoSourceSinkController/VideoStreamEncoder where the former uses
locks in all methods and is unaware of a threading model. That design
affected downstream objects, pushed the need for an async hop into
WVSS and added a lock.
A suggestion was made to address this in a follow-up change, here:
https://webrtc-review.googlesource.com/c/src/+/165684
* All methods in VideoSourceSinkController are now called on a known
and checked sequence and this CL removes the lock. This also makes
checking state consistent (i.e. calling a getter twice in a row on the
same sequence, will always return the same value, avoiding race with
other threads).
* Handling of reporting state changes from the encoder queue to the
VSSC, is done by VideoStreamEncoder.
* VideoSendStreamImpl is still instantiated on the incorrect thread [1]
but has two initialization steps [2]. The second one already runs on
the right thread. Addressing that TODO [1] is something we should do
but it has side effects to consider. For the purposes of this CL
the steps relating to the encoder (setting the sink pointer) have
been moved to [2].
[1] https://source.chromium.org/chromium/chromium/src/+/master:third_party/webrtc/video/video_send_stream.cc;l=94
[2] https://source.chromium.org/chromium/chromium/src/+/master:third_party/webrtc/video/video_send_stream.cc;drc=f4a9991cce74a37d006438ec0e366313ed33162e;l=115
Bug: webrtc:11222, webrtc:11908
Change-Id: Ie46d46e3a52bbe225951b4bd580ecb8cc9cad873
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/184508
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Commit-Queue: Tommi <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32150}
Add a get_and_clear_legacy_stats flag to AudioReceiveStream::GetStats,
to distinguish calls from standard GetStats and legacy GetStats.
Add const method NetEq::CurrentNetworkStatistics to get current
values of stateless NetEq stats. Standard GetStats will then call this
method instead of NetEq::NetworkStatistics.
Bug: webrtc:11622
Change-Id: I3833a246a9e39b18c99657a738da22c6e2bd5f5e
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183600
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32092}
The signature of send_cb was changed, adding ulp_info. This change makes
it easier to retrieve the SctpTransport pointer from the callback.
Bug: webrtc:11899
Change-Id: I12a4ccd2d0deb329f6be17a4c7208449833dc188
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/182984
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Taylor <deadbeef@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32067}
As documented in webrtc:11908 this cleanup is fairly invasive and
when a part of a frequently executed code path, can be quite costly
in terms of performance overhead. This is currently the case with
synchronous calls between threads (Thread) as well with our proxy
api classes.
With this CL, all code in WebRTC should now either be using MessageHandlerAutoCleanup
or calling MessageHandler(false) explicitly.
Next steps will be to update external code to either depend on the
AutoCleanup variant, or call MessageHandler(false).
Changing the proxy classes to use TaskQueue set of concepts instead of
MessageHandler. This avoids the perf overhead related to the cleanup
above as well as incompatibility with the thread policy checks in
Thread that some current external users of the proxies would otherwise
run into (if we were to use Thread::Send() for synchronous call).
Following this we'll move the cleanup step into the AutoCleanup class
and an RTC_DCHECK that all calls to the MessageHandler are setting
the flag to false, before eventually removing the flag and make
MessageHandler pure virtual.
Bug: webrtc:11908
Change-Id: Idf4ff9bcc8438cb8c583777e282005e0bc511c8f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183442
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Commit-Queue: Tommi <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32049}
This fixes some edge cases where early media could cause default
stream that block the actual signaled media from beind delivered.
Bug: webrtc:11477
Change-Id: I8b26df63a690861bd19f083102d1395e882f8733
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/183120
Commit-Queue: Taylor <deadbeef@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32030}
This is to allow testing without using the singleton sctp library.
cricket::SctpTransportInternalFactory is renamed to webrtc::SctpTransportFactoryInterface and moved to the API folder to follow the API structure.
Tests can use test/pc/sctp/fake_sctp_transport.h to inject a faked data channel implementation.
patch 1 contain the original cl.
patch 2 modifications
Bug: none
Change-Id: Ic088da3eb7d9aada79e6d601dbf2d1aa2be777f6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/182840
Reviewed-by: Taylor <deadbeef@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Per Kjellander <perkj@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32024}
This will enable wiring up these signals to the platform specific capturers
Bug: chromium:1116430
Change-Id: I6cdab61eab202a24fa56167da57c389a5b1880c2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/182683
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32017}
This reverts commit 4c0a381137c04fd80830af8a041e25e3428dd33f.
Reason for revert: Breaks downstream test
Original change's description:
> Make cricket::SctpTransportInternalFactory injectable through PeerConnectionFactory Deps
>
> This is to allow testing without using the singleton sctp library.
> cricket::SctpTransportInternalFactory is renamed to webrtc::SctpTransportFactoryInterface and moved to the API folder to follow the API structure.
> Tests can use test/pc/sctp/fake_sctp_transport.h to inject a faked data channel implementation.
>
> Bug: none
> Change-Id: I482241269463595062548870750d33f31238c6b1
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/182082
> Commit-Queue: Per Kjellander <perkj@webrtc.org>
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Taylor <deadbeef@webrtc.org>
> Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#32007}
TBR=deadbeef@webrtc.org,mbonadei@webrtc.org,kwiberg@webrtc.org,perkj@webrtc.org
Change-Id: I46d5ba89fe723caccd065b0ac41d77ed45373838
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: none
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/182802
Reviewed-by: Björn Terelius <terelius@webrtc.org>
Commit-Queue: Björn Terelius <terelius@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32008}
This is to allow testing without using the singleton sctp library.
cricket::SctpTransportInternalFactory is renamed to webrtc::SctpTransportFactoryInterface and moved to the API folder to follow the API structure.
Tests can use test/pc/sctp/fake_sctp_transport.h to inject a faked data channel implementation.
Bug: none
Change-Id: I482241269463595062548870750d33f31238c6b1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/182082
Commit-Queue: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Taylor <deadbeef@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#32007}
