Reason for revert:
Makes perf and Chromium FYI bots unhappy.
Original issue's description:
> WebRtcVoiceMediaChannel::AddRecvStream: Don't call SetRecPayloadType
>
> This removes one more place where we were unable to handle codecs not
> in the built-in set.
>
> BUG=webrtc:5805
>
> Review-Url: https://codereview.webrtc.org/2686043006
> Cr-Commit-Position: refs/heads/master@{#17370}
> Committed: 1724cfbdbaTBR=ossu@webrtc.org,solenberg@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5805
Review-Url: https://codereview.webrtc.org/2772043002
Cr-Commit-Position: refs/heads/master@{#17374}
This removes one more place where we were unable to handle codecs not
in the built-in set.
BUG=webrtc:5805
Review-Url: https://codereview.webrtc.org/2686043006
Cr-Commit-Position: refs/heads/master@{#17370}
The file was aldready pruned down to the point where it only included
webrtc/typedefs.h. Therefore, all includes of
voice_engine_configurations.h are replaced with typedefs.h, except on
two occasions where it was obvously not needed.
BUG=webrtc:6506
Review-Url: https://codereview.webrtc.org/2553583002
Cr-Commit-Position: refs/heads/master@{#15547}
This gets rid of a bit of codec-specific code in VoE.
BUG=webrtc:5805
Review-Url: https://codereview.webrtc.org/2355483003
Cr-Commit-Position: refs/heads/master@{#14614}
This CL deletes the old and not used video defines in
engine_configurations.h and pre-pends voice_ to indicate there are only
voice/audio defines left in the file.
BUG=none
R=solenberg@webrtc.org
Review URL: https://codereview.webrtc.org/2401673002 .
Cr-Commit-Position: refs/heads/master@{#14558}
NetEq already uses SdpAudioFormat internally; this CL adds an
AudioCodingModule::RegisterReceiveCodec overload that accepts
SdpAudioFormat, and propagates it through AcmReceiver into NetEq.
The intention is to get rid of the other ways to specify decoders and
always use SdpAudioFormat. (And eventually to do the same for encoders
too.)
NOTRY=true
BUG=5801
Review-Url: https://codereview.webrtc.org/2365653004
Cr-Commit-Position: refs/heads/master@{#14506}
It requires a new NetEq method, but it can no longer fail. And we no
longer need to use AcmReceiver::decoders_, which we're trying to
eliminate.
(This is a re-land of https://codereview.webrtc.org/2342313002.)
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2348233002
Cr-Commit-Position: refs/heads/master@{#14304}
Reason for revert:
Seems to have broken Chromium tests.
Original issue's description:
> AcmReceiver: Look up last decoder in NetEq's table of decoders
>
> AcmReceiver::decoders_ is now one step closer to being unused.
>
> BUG=webrtc:5801
>
> Committed: https://crrev.com/1e4d8b574cde64d93b98d89c7b817fb93185a307
> Cr-Commit-Position: refs/heads/master@{#14274}
TBR=ossu@webrtc.org,henrik.lundin@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2348123002
Cr-Commit-Position: refs/heads/master@{#14279}
Reason for revert:
Seems to have broken Chromium tests.
Original issue's description:
> AcmReceiver: Ask NetEq to delete all decoders at once instead of one by one
>
> It requires a new NetEq method, but it can no longer fail. And we no
> longer need to use AcmReceiver::decoders_, which we're trying to
> eliminate.
>
> BUG=webrtc:5801
>
> Committed: https://crrev.com/f6232b43a176e1717354b671a0a52b887d70de59
> Cr-Commit-Position: refs/heads/master@{#14275}
TBR=ossu@webrtc.org,henrik.lundin@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2349973002
Cr-Commit-Position: refs/heads/master@{#14278}
It requires a new NetEq method, but it can no longer fail. And we no
longer need to use AcmReceiver::decoders_, which we're trying to
eliminate.
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2342313002
Cr-Commit-Position: refs/heads/master@{#14275}
AcmReceiver::decoders_ is now one step closer to being unused.
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2339953002
Cr-Commit-Position: refs/heads/master@{#14274}
The new method returns the current total delay (packet buffer and sync
buffer) in ms, with smoothing applied to even out short-time
fluctuations due to jitter. The packet buffer part of the delay is not
updated during DTX/CNG periods.
This CL also pipes the new metric through ACM and uses it in
VoiceEngine. It replaces the previous method of estimating the buffer
delay (where an inserted packet's RTP timestamp was compared with the
last played timestamp from NetEq). The new method works better under
periods of DTX/CNG.
Review-Url: https://codereview.webrtc.org/2262203002
Cr-Commit-Position: refs/heads/master@{#13855}
The new parameter indicates if the output in the AudioFrame is muted. If
so, the output samples are not written, but should be interpreted as all
zero.
A version of AudioCodingModule::PlayoutData10Ms() without the new
parameter is maintained while waiting for downstream dependencies to
conform.
BUG=webrtc:5609
Review-Url: https://codereview.webrtc.org/1976913002
Cr-Commit-Position: refs/heads/master@{#12719}
This is in preparation for changes to when the playout timestamp is
valid.
BUG=webrtc:5669
Review URL: https://codereview.webrtc.org/1853183002
Cr-Commit-Position: refs/heads/master@{#12256}
This change essentially does two things:
1. Remove the VAD-related methods from AcmReceiver. These are
EnableVad(), DisableVad(), and vad_enabled(). None of them were used
outside of unit tests.
2. Move the functionality to set AudioFrame::speech_type_ and
AudioFrame::vad_activity_ inside NetEq. This was previously done in
AcmReceiver, but based on information inherently owned by NetEq.
With the change in 2, NetEq's GetAudio interface can be simplified by
removing the output type parameter. This will be done in a follow-up
CL.
BUG=webrtc:5607
Review URL: https://codereview.webrtc.org/1772583002
Cr-Commit-Position: refs/heads/master@{#11902}
With this change, NetEq now uses AudioFrame as output type, like the
surrounding functions in ACM and VoiceEngine already do.
The computational savings is probably slim, since one memcpy is
removed while another one is added (both in AcmReceiver::GetAudio).
More simplifications and clean-up will be done in
AcmReceiver::GetAudio in future CLs.
BUG=webrtc:5607
Review URL: https://codereview.webrtc.org/1750353002
Cr-Commit-Position: refs/heads/master@{#11874}
The new fields are default-populated for built-in decoders, but for
external decoders, the name can now be given when registering the
decoder.
BUG=webrtc:3520
Review URL: https://codereview.webrtc.org/1484343003
Cr-Commit-Position: refs/heads/master@{#10952}
This is the last piece of the old directory layout of the modules.
Duplicated header files are left in audio_coding/main/include until
downstream code is updated to the new location. They have pragma
warnings added to them and identical header guards as the new headers to avoid breaking things.
BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
NOTRY=True
NOPRESUBMIT=True
Review URL: https://codereview.webrtc.org/1481493004
Cr-Commit-Position: refs/heads/master@{#10803}
