Removes ThreadPosix::InitParams and a corresponding wait for an event.
This unblocks ThreadPosix::Start which had to wait for thread scheduling
for an event to trigger on the spawned thread, giving faster Start()
calls.
BUG=4413
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43699004
Cr-Commit-Position: refs/heads/master@{#8709}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8709 4adac7df-926f-26a2-2b94-8c16560cd09d
> Speculative revert of 8631 "Remove lock from Bitrate() and FrameRate() in Video..."
>
> We ran into the alignment problem on Mac 10.9 debug again. This is the only CL I see in the range that adds an rtc::CriticalSection, so I'm trying out reverting it before attempting another roll.
>
> > Remove lock from Bitrate() and FrameRate() in VideoSender.
> > These methods are called on the VideoSender's construction thread, which is the same thread as modifies the value of _encoder. It's therefore safe to not require a lock to access _encoder on this thread.
> >
> > I'm making access to the rate variables from VCMGenericEncoder, thread safe, by using a lock that's not associated with the encoder. There should be little to no contention there. While modifying VCMGenericEncoder, I noticed that a couple of member variables weren't needed, so I removed them.
> >
> > The reason for this change is that getStats is currently contending with the encoder when Bitrate() is called. On my machine, this means that getStats can take about 25-30ms instead of ~1ms.
> >
> > Also adding some documentation for other methods and a suggestion for how we could avoid contention between the encoder and the network thread.
> >
> > BUG=2822
> > R=mflodman@webrtc.org
> >
> > Review URL: https://webrtc-codereview.appspot.com/43479004
>
> TBR=tommi@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/45529004TBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46519004
Cr-Commit-Position: refs/heads/master@{#8645}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8645 4adac7df-926f-26a2-2b94-8c16560cd09d
We ran into the alignment problem on Mac 10.9 debug again. This is the only CL I see in the range that adds an rtc::CriticalSection, so I'm trying out reverting it before attempting another roll.
> Remove lock from Bitrate() and FrameRate() in VideoSender.
> These methods are called on the VideoSender's construction thread, which is the same thread as modifies the value of _encoder. It's therefore safe to not require a lock to access _encoder on this thread.
>
> I'm making access to the rate variables from VCMGenericEncoder, thread safe, by using a lock that's not associated with the encoder. There should be little to no contention there. While modifying VCMGenericEncoder, I noticed that a couple of member variables weren't needed, so I removed them.
>
> The reason for this change is that getStats is currently contending with the encoder when Bitrate() is called. On my machine, this means that getStats can take about 25-30ms instead of ~1ms.
>
> Also adding some documentation for other methods and a suggestion for how we could avoid contention between the encoder and the network thread.
>
> BUG=2822
> R=mflodman@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/43479004TBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45529004
Cr-Commit-Position: refs/heads/master@{#8640}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8640 4adac7df-926f-26a2-2b94-8c16560cd09d
These methods are called on the VideoSender's construction thread, which is the same thread as modifies the value of _encoder. It's therefore safe to not require a lock to access _encoder on this thread.
I'm making access to the rate variables from VCMGenericEncoder, thread safe, by using a lock that's not associated with the encoder. There should be little to no contention there. While modifying VCMGenericEncoder, I noticed that a couple of member variables weren't needed, so I removed them.
The reason for this change is that getStats is currently contending with the encoder when Bitrate() is called. On my machine, this means that getStats can take about 25-30ms instead of ~1ms.
Also adding some documentation for other methods and a suggestion for how we could avoid contention between the encoder and the network thread.
BUG=2822
R=mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43479004
Cr-Commit-Position: refs/heads/master@{#8631}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8631 4adac7df-926f-26a2-2b94-8c16560cd09d
Allow for setting different cpu_speed setting based on resolution, for non-simulcast.
Use the existing low resolution simulcast cpu_speed setting for the non-simulcast case.
No change to simulcast behavior, unless top/highest layer stream is also below CIF resolution,
(in which case all layers will use lower the cpu_speed setting =-4).
BUG=
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37319004
Cr-Commit-Position: refs/heads/master@{#8603}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8603 4adac7df-926f-26a2-2b94-8c16560cd09d
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
This reverts commit r8434.
Reason for revert: Introduced a race condition. If ViECaptureProcess() -> SwapCapturedAndDeliverFrameIfAvailable() is called twice without a call to OnIncomingCapturedFrame() in between (with both captured_frame_ and deliver_frame_ populated), an old frame will be delivered again, since captured_frame_->IsZeroSize() will never be true.
BUG=4352
TBR=perkj@webrtc.org, stefan@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/40129004
Cr-Commit-Position: refs/heads/master@{#8530}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8530 4adac7df-926f-26a2-2b94-8c16560cd09d
Mostly, it's about moving constructors and descructors to the .cc
files, so that they won't be inlined everywhere.
The reason this CL is so big is that a lot of code was using
common_types.h without declaring a dependency on webrtc_common, which
broke the build once common_types.h started to depend on
common_types.cc.
BUG=163
R=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/26089004
Cr-Commit-Position: refs/heads/master@{#8516}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8516 4adac7df-926f-26a2-2b94-8c16560cd09d
* Move constants into the files/functions that use them
* Declare variables in the narrowest scope possible
* Use correct (expected, actual) order for gtest macros
* Remove unused functions
* Untabify
* 80-column limit
* Avoid C-style casts
* Prefer true typed constants to "enum hack" constants
* Print size_t using the right format macro
* Shorten and simplify code
* Other random cleanup bits and style fixes
BUG=none
TEST=none
R=henrik.lundin@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36179004
Cr-Commit-Position: refs/heads/master@{#8467}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8467 4adac7df-926f-26a2-2b94-8c16560cd09d
Fetching the current codec for sake of gathering stats, is frequently blocked since it's done by acquiring the same lock as is held while encoding frames. This can mean tens of milliseconds.
To improve this, I'm taking advantage of the fact that the codec information is set on the same thread as is used to query the information. This means that locking isn't needed for querying this information. I'm adding checks to make sure debug builds will crash if this isn't followed.
An alternative to this approach could be to add one more lock that is specifically used for the codec information variable. This would also decouple querying codec information from the encoder itself, but still requires a lock.
This patch depends on making ThreadChecker part of rtc_base_approved:
https://webrtc-codereview.appspot.com/40539004/
BUG=2822
R=mflodman@webrtc.org, pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37779004
Cr-Commit-Position: refs/heads/master@{#8435}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8435 4adac7df-926f-26a2-2b94-8c16560cd09d
Unblocks pending threads (render thread + decoder thread) when
destroying renderers and shutting down decoders.
Speeds up SetLocalDescription significantly (10x or so) under
WebRtcVideoEngine2 but also shutdown times in ~ViEChannel and
~ViEReceiver in general.
BUG=1788
R=mflodman@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41959004
Cr-Commit-Position: refs/heads/master@{#8387}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8387 4adac7df-926f-26a2-2b94-8c16560cd09d
Modifies WebRtcVideoSendStream to use a default width/height of 16px.
This significantly reduces SetRemoteDescription time under
WebRtcVideoEngine2. Also preventing (expensive) reconfigurations due to
incoming frames when the channel is not sending yet.
Tests have been modified to generate a frame before expecting a certain
encoder size to have been configured.
Also adding tracing to WebRtcVideoSendStream::InputFrame as it can lead
to reconfigurations of the encoder which is expensive and it should show
up in chrome://tracing.
BUG=1788
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42369004
Cr-Commit-Position: refs/heads/master@{#8381}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8381 4adac7df-926f-26a2-2b94-8c16560cd09d
