2b19f06312
Wire up RTT statistics to webrtc::Call.
...
R=mflodman@webrtc.org , stefan@webrtc.org
BUG=1667,1788
Review URL: https://webrtc-codereview.appspot.com/32249004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7876 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-12-11 13:26:09 +00:00
a85307737c
(Auto)update libjingle 81702493-> 81755413
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7860 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-12-10 09:01:18 +00:00
008731868a
Implement settable min/start/max bitrates in Call.
...
These parameters are set by the x-google-*-bitrate SDP parameters. This
is implemented on a Call level instead of per-stream like the currently
underlying VideoEngine implementation to allow this refactoring to not
reconfigure the VideoCodec at all but rather adjust bandwidth-estimator
parameters.
Also implements SetMaxSendBandwidth in WebRtcVideoEngine2 as it's a SDP
parameter and allowing it to be dynamically readjusted in Call.
R=mflodman@webrtc.org , stefan@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/26199004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7746 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-11-25 14:03:34 +00:00
a2ef4fe9c3
Prevent a lot of VideoSendStream reconfigures.
...
Checking whether we're setting the same configuration or not.
Experimentally this brings down underlying reconfigures from ~20 to
about 4-5.
R=stefan@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/30909004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7659 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-11-07 10:54:43 +00:00
19b4741004
Removing unused method GetDefaultVideoEncoderConfig.
...
R=pbos@webrtc.org , tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/27959004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7649 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-11-06 11:16:32 +00:00
0bae1fab4a
Wire up bandwidth stats to the new API and webrtcvideoengine2.
...
Adds stats to verify bandwidth and pacer stats.
BUG=1788
R=mflodman@webrtc.org , pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/24969004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7634 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-11-05 14:05:29 +00:00
96a93259b3
Implement external decoder support in WebRtcVideoEngine2.
...
R=stefan@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/30839004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7594 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-11-03 14:46:44 +00:00
3bf3d238c8
Configure A/V sync in WebRtcVideoEngine2.
...
Sets up A/V sync for the first video receive channel with the default
voice channel. This is only done when conference mode is disabled to
preserve existing behavior. Ideally we'd know which voice channel to
sync with here.
R=mflodman@webrtc.org , stefan@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/23249004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7577 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-31 12:59:34 +00:00
776e6f289c
Use external VideoDecoders in VideoReceiveStream.
...
Removes direct VideoCodec use from the new API, exposes VideoDecoders
through webrtc/video_decoder.h similar to VideoEncoders.
Also includes some preparation for wiring up external decoders in
WebRtcVideoEngine2 by adding AllocatedDecoders that specify whether they
were allocated internally or externally.
Additionally addresses a data race in VideoReceiver that was exposed with this change.
R=mflodman@webrtc.org , stefan@webrtc.org
TBR=pthatcher@webrtc.org
BUG=2854,1667
Review URL: https://webrtc-codereview.appspot.com/27829004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7560 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-29 15:28:39 +00:00
efc82c2c73
Implement screencast settings for WebRtcVideoEngine2.
...
Adds support for screencast_min_bitrate and sets content type
corresponding to the capture type.
R=stefan@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/29959004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7529 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-27 13:58:00 +00:00
fa553ef605
Set up start bitrate in WebRtcVideoEngine2.
...
R=stefan@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/27789004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7476 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-20 11:07:07 +00:00
1ecbe45c7e
(Auto)update libjingle 77689511-> 77696841
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7449 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-14 20:29:28 +00:00
7fe1e03dd6
Wire up external encoders.
...
R=pthatcher@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/30649005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7440 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-14 04:25:33 +00:00
3c16d8bd1c
(Auto)update libjingle 77414393-> 77554188
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7428 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-13 06:35:10 +00:00
97abeee282
(Auto)update libjingle 77263371-> 77296420
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7400 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-08 22:24:30 +00:00
575d126a3d
Protect send_/recv_streams_ in WebRtcVideoEngine2.
...
Important as OnLoadUpdate() won't be called on the worker thread and the
list of streams can't be concurrently modified while delivering this
callback to all send streams.
R=stefan@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/22959004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7395 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-08 14:48:08 +00:00
42684be21b
Wire up CPU adaptation in WebRtcVideoEngine2.
...
Includes clean-up work to be able to use the webrtc::Call::Config that's
set up. This introduced a CallFactory to spawn a FakeCall with the
config used and allowed removal of FakeWebRtcVideoChannel2.
BUG=1788
R=mflodman@webrtc.org , pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/24779004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7370 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-03 11:25:45 +00:00
d60d79a145
Thread annotation of rtc::CriticalSection.
...
Effectively re-lands r5516 which was reverted because talk/-only
checkouts existed. This now resides in webrtc/base/, so no talk/-only
checkouts should be possible.
This change also enables -Wthread-safety for talk/ and fixes a bug in
talk/media/webrtc/webrtcvideoengine2.cc where a guarded variable was
read without taking the corresponding lock.
R=andresp@webrtc.org , mflodman@webrtc.org , pthatcher@webrtc.org
BUG=
Review URL: https://webrtc-codereview.appspot.com/27569004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7284 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-24 07:10:57 +00:00
38344ed280
Move thread_annotations.h to webrtc/base/.
...
R=andresp@webrtc.org , mflodman@webrtc.org
BUG=
Review URL: https://webrtc-codereview.appspot.com/27579004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7283 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-24 06:05:00 +00:00
0a2087a711
Skeleton for registering external encoders/decoders.
...
R=pthatcher@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/31429005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7270 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-23 09:40:22 +00:00
83f95ba9a6
Remove engine-level SetOptions.
...
Already removed in WebRtcVideoEngine.
R=andresp@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/29549005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7265 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-22 16:07:18 +00:00
bbe0a8517d
Config struct for VideoEncoder.
...
Used for config parameters in common between multiple codecs as well as
the encoder-specific pointer. In particular this contains content mode
(realtime video vs. screenshare).
BUG=1788
R=mflodman@webrtc.org , stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/16319004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7239 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-19 12:30:25 +00:00
992febb997
(Auto)update libjingle 74873066-> 74873164
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7089 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-05 16:39:08 +00:00
818b7b3ac9
(Auto)update libjingle 74825084-> 74825992
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7074 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-05 00:14:03 +00:00
c4175b9fdf
Set resolution based on incoming VideoFrames.
...
R=pthatcher@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/17269004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7042 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-03 15:25:49 +00:00
9f341283f6
Remove WebRtcVideoEngine::default_codec_format().
...
R=pthatcher@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/24399004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7029 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-09-02 16:33:09 +00:00
b648b9d85c
Remove test constructor in WebRtcVideoEngine2.
...
Removes the need for ::Construct().
BUG=1788
R=pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/15279004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6977 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-08-26 11:08:06 +00:00
3740d74106
(Auto)update libjingle 73927658-> 73927775
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6958 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-08-22 22:27:04 +00:00
ef8bb8d9b0
Make sure that muting muted streams succeeds.
...
We don't want to report an error here, and PeerConnection relies on
being able to mute already-muted streams (I hit an assert when testing
manually).
BUG=1788
R=pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/14139004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6895 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-08-13 21:36:18 +00:00
a09a99950e
(Auto)update libjingle 73222930-> 73226398
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6891 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-08-13 17:26:08 +00:00
2c0fb05f16
(Auto)update libjingle 73221069-> 73222930
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6889 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-08-13 16:47:12 +00:00
afb554f404
Move default-recv-channels to a separate class.
...
BUG=1788,3099
R=pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20119004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6879 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-08-12 23:17:13 +00:00
d4e598d57a
(Auto)update libjingle 72097588-> 72159069
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6799 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-07-29 17:36:52 +00:00
6f48f1bf68
Implement encoder options in WebRtcVideoEngine2.
...
Implementing default options to enable denoising by default and wiring
up encoder settings to propagate VP8 settings.
BUG=1788
R=wu@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/19999004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6757 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-07-22 16:29:54 +00:00
e6f84ae8a6
Initial WebRtcVideoEngine2::GetStats().
...
Also forward-declaring and moving WebRtcVideoRenderer out of header.
BUG=1788
R=pthatcher@webrtc.org , wu@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/13869004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6729 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-07-18 11:11:55 +00:00
d1ea06b3d5
Restart VideoReceiveStreams in WebRtcVideoEngine2.
...
Puts VideoReceiveStreams in a wrapper, WebRtcVideoReceiveStream that
contain their state (configs). WebRtcVideoRenderer (the wrapper between
webrtc::VideoRenderer and cricket::VideoRenderer) has also been merged
into WebRtcVideoReceiveStream.
Implements and tests setting codecs with new FEC settings as well as RTP
header extensions on already existing receive streams.
BUG=1788
R=pthatcher@webrtc.org , wu@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/14879004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6727 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-07-18 09:35:58 +00:00
5301b0f1fc
Move additional state into WebRtcVideoSendStream.
...
Prevents having two places where codecs etc. are set up and allows us to
avoid creating the underlying VideoSendStream before send codecs are
set up.
BUG=1788
R=pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20939004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6716 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-07-17 08:51:46 +00:00
587ef60056
Implement RTP extension support in WebRtcVideoEngine2.
...
BUG=1788
R=pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20679004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6453 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-06-16 17:32:02 +00:00
d41eaeb7cd
(Auto)update libjingle 69005149-> 69049090
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6408 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-06-12 07:13:26 +00:00
6ae48c6609
Make VideoSendStream/VideoReceiveStream configs const.
...
Benefits of this is that the send config previously had unclear locking
requirements, a lock was used to lock parts parts of it while
reconfiguring the VideoEncoder. Primary work was splitting out video
streams from config as well as encoder_settings as these change on
ReconfigureVideoEncoder. Now threading requirements for both member
configs are clear (as they are read-only), and encoder_settings doesn't
stay in the config as a stale pointer.
CreateVideoSendStream now takes video streams separately as well as the
encoder_settings pointer, analogous to ReconfigureVideoEncoder.
This change required changing so that pacing is silently enabled when
using suspend_below_min_bitrate rather than silently setting it.
R=henrik.lundin@webrtc.org , mflodman@webrtc.org , pthatcher@webrtc.org , stefan@webrtc.org
BUG=3260
Review URL: https://webrtc-codereview.appspot.com/20409004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6349 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-06-06 10:49:19 +00:00
0d523eea83
Remove static initializer from WebRtcVideoEngine2.
...
BUG=
R=pliard@google.com , pthatcher@webrtc.org , pliard@chromium.org
Review URL: https://webrtc-codereview.appspot.com/15679005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6338 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-06-05 09:10:55 +00:00
b5a22b1464
Revert r6110 and r6109.
...
Effectively re-landing r6104 as well as r6108 which includes a fix to a
compile error that caused r6104 to be reverted in r6110.
BUG=
TBR=henrike@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20459004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6119 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-05-13 11:07:01 +00:00
17911dca80
(Auto)update libjingle 66798415-> 66813165
...
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6110 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-05-12 18:42:49 +00:00
d266a2020f
Initial wiring of new webrtc API in libjingle.
...
BUG=1788
R=pthatcher@google.com , pthatcher@webrtc.org
TBR=juberti@webrtc.org , mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/8549005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6104 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-05-12 14:32:01 +00:00
