The ACM tests needed re-writing, because all tests were not individual gtests, and the result was difficult to interpret.
While doing the re-write, I discovered a bug related to 48 kHz CNG. We can't have the 48 kHz CNG active at the moment. The bug is fixed in this CL.
I also needed to rewrite parts of the VAD/DTX implementation, so that the status of VAD and DTX (enabled or not) is propagated back from the function SetVAD().
BUG=issue2173
R=minyue@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1961004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4625 4adac7df-926f-26a2-2b94-8c16560cd09d
This is a re-land attempt of http://review.webrtc.org/1673004/
It now includes a build/isolate.gypi in WebRTC that includes the same
file as the one that would be included when WebRTC is used in a Chromium
checkout. It is needed since it is not possible to use variables in GYP's
includes sections.
Implemented according to the instructions at
http://www.chromium.org/developers/testing/isolated-testing
Workflow has been like this:
1. create _run GYP target
2. create a stripped down .isolate file
3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
4. runhooks
5. compile
6. test if the test would run (i.e. find it's dependencies) without
actually executing it:
tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
7. If failing, run the fix_test_cases.py script like this:
tools/swarm_client/googletest/fix_test_cases.py --isolated out/Release/testname.isolated
All tests that run on the bots for WebRTC has got _run target
and .isolate file created.
"Normal tests" that run fine on any machine:
* audio_decoder_unittests
* common_audio_unittests
* common_video_unittests
* metrics_unittests
* modules_tests
* modules_unittests
* neteq_unittests
* system_wrappers_unittests
* test_support_unittests
* tools_unittests
* video_engine_core_unittests
* voice_engine_unittests
Tests that requires bare-metal and audio/video devices:
* audio_device_tests
* video_capture_tests
I also added the isolate boilerplate code for the following
tests that are not yet pure gtest binaries (which means they
cannot run isolated yet):
* video_render_tests
* vie_auto_test
* voe_auto_test
TEST=running isolate.py as described above. WebRTC trybots passing. Created a Chromium checkout with third_party/webrtc ToT and this patch applied, passing the runhooks step.
BUG=1916
R=henrike@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2056004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4590 4adac7df-926f-26a2-2b94-8c16560cd09d
As this breaks the FYI bots in
http://build.chromium.org/p/chromium.webrtc.fyi/waterfall
due to different path to isolate.gypi (which cannot easily
be resolved due to limitations in GYP)
> Isolate GYP target and .isolate files for tests
>
> Implemented according to the instructions at
> http://www.chromium.org/developers/testing/isolated-testing
>
> Workflow has been like this:
> 1. create _run GYP target
> 2. create a stripped down .isolate file
> 3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
> 4. runhooks
> 5. compile
> 6. test if the test would run (i.e. find it's dependencies) without
> actually executing it:
> tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
> 7. If failing, run the fix_test_cases.py script like this:
> tools/swarm_client/fix_test_cases.py --isolated out/Release/testname.isolated
>
> All tests that run on the bots for WebRTC has got _run target
> and .isolate file created.
>
> "Normal tests" that run fine on any machine:
> * audio_decoder_unittests
> * common_audio_unittests
> * common_video_unittests
> * metrics_unittests
> * modules_integrationtests
> * modules_unittests
> * neteq_unittests
> * system_wrappers_unittests
> * test_support_unittests
> * tools_unittests
> * video_engine_core_unittests
> * voice_engine_unittests
>
> Tests that requires bare-metal and audio/video devices:
> * audio_device_integrationtests
> * video_capture_integrationtests
>
> I also added the isolate boilerplate code for the following
> tests that are not yet pure gtest binaries (which means they
> cannot run isolated yet):
> * video_render_integrationtests
> * vie_auto_test
> * voe_auto_test
>
> TEST=running isolate.py as described above.
> BUG=1916
> R=tommi@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/1673004TBR=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2040004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4548 4adac7df-926f-26a2-2b94-8c16560cd09d
Implemented according to the instructions at
http://www.chromium.org/developers/testing/isolated-testing
Workflow has been like this:
1. create _run GYP target
2. create a stripped down .isolate file
3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
4. runhooks
5. compile
6. test if the test would run (i.e. find it's dependencies) without
actually executing it:
tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
7. If failing, run the fix_test_cases.py script like this:
tools/swarm_client/fix_test_cases.py --isolated out/Release/testname.isolated
All tests that run on the bots for WebRTC has got _run target
and .isolate file created.
"Normal tests" that run fine on any machine:
* audio_decoder_unittests
* common_audio_unittests
* common_video_unittests
* metrics_unittests
* modules_integrationtests
* modules_unittests
* neteq_unittests
* system_wrappers_unittests
* test_support_unittests
* tools_unittests
* video_engine_core_unittests
* voice_engine_unittests
Tests that requires bare-metal and audio/video devices:
* audio_device_integrationtests
* video_capture_integrationtests
I also added the isolate boilerplate code for the following
tests that are not yet pure gtest binaries (which means they
cannot run isolated yet):
* video_render_integrationtests
* vie_auto_test
* voe_auto_test
TEST=running isolate.py as described above.
BUG=1916
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1673004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4547 4adac7df-926f-26a2-2b94-8c16560cd09d
This is the conversation I had with Henrik Lundin regarding this problem.
Me:
In Expand::AnalyseSignal() we compute correlation and distortion, then calculate the ratio of correlation to distortion. There if distortion is zero we expect that correlation to be zero. Although in practice this might be true, I suppose we rarely hit into absolutely periodic signal, but in one of the tests the assertion in line 455 of expand.cc was triggered. The distortion is computed over a shorter length of the signal, while correlation is computed over longer segments. Therefore, I guess, if the signal has just enough zeros at the beginning we can end up in situation that distortion is zero but not the correlation. Do you agree? I didn't have time to attempt to solve this, but if my line of thought is correct, we should not have that assert. Perhaps, if correlation is zero we set the ratio to 0, otherwise, ratio would be the largest value of its own type. Any thoughts?
Henrik:
I agree with you. Go ahead with your solution.
R=minyue@google.com
Review URL: https://webrtc-codereview.appspot.com/1888006
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4448 4adac7df-926f-26a2-2b94-8c16560cd09d
A new test target named 'modules_integrationtests' is created
and the following test targets were merged into it:
* audio_coding_module_test
* test_fec
* video_coding_integrationtests
* vp8_integrationtests
A couple of other targets were merged into modules_unittests:
* audio_coding_unittests
* audioproc_unittest
* common_unittests
* video_coding_unittests
* video_processing_unittests
* vp8_unittests
I wasn't able to merge audio_decoder_unittests and neteq_unittests due to
conflicts with different defines in these tests.
Some tests that have special requirements aren't merged into
modules_integrationtests yet. I took the opportunity to rename them
since the bot configs will need to be update anyway:
* audio_device_test_api -> audio_device_integrationtests
* video_capture_module_test -> video_capture_integrationtests
* video_render_module_test -> video_render_integrationtests
Exclude files were added for modules_integrationtests to make sure
the memcheck and tsan bots doesn't tests that are too slow
(audio_coding_module_test and vp8_integrationtests were previously
disabled on those bots).
Suppressions for AudioCodingModuleTest needed to be added to get
modules_integrationtests to pass memcheck (even if the test is
excluded from execution).
BUG=1843
TEST=local execution on Linux and trybots (passing except the merged tests of course)
R=andrew@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1656004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4228 4adac7df-926f-26a2-2b94-8c16560cd09d
Having this failing test being disabled in code will make it
possible to add it on the bots again, and make thus no bot
configuration update needs to be communicated when it's fixed.
BUG=1460
TEST=Compiled with GYP_DEFINES=target_arch=x64 and ran the
test successsfully on Windows. Also ran regular trybots.
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1595004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4165 4adac7df-926f-26a2-2b94-8c16560cd09d
Having this failing test being disabled in code will make it
possible to add it on the bots again, and make thus no bot
configuration update needs to be communicated when it's fixed.
BUG=1459
TEST=Compiled with GYP_DEFINES=target_arch=x64 and ran the
test successsfully on Windows. Also ran regular trybots.
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1594004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4164 4adac7df-926f-26a2-2b94-8c16560cd09d
Having this failing test being disabled in code will make it
possible to add it on the bots again, and make thus no bot
configuration update needs to be communicated when it's fixed.
BUG=1458
TEST=Compiled with GYP_DEFINES=target_arch=x64 and ran the
test successsfully on Windows. Also ran regular trybots.
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1593004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4163 4adac7df-926f-26a2-2b94-8c16560cd09d
* The old resampler was found to have a wraparound bug.
* Remove support for the old resampler from PushResampler.
* Use PushResampler in AudioCodingModule.
* The old resampler must still be removed from the file utility.
BUG=webrtc:1867,webrtc:827
TESTED=unit tests, Chrome using apprtc and voe_cmd_test to verify wrap-around is corrected, voe_cmd_test running through all supported codec sample rates and channels to verify good quality audio
R=henrika@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1590004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4156 4adac7df-926f-26a2-2b94-8c16560cd09d
Pure formatting of all files located in /webrtc/modules/audio_coding/main/test/
Smaller manual modifications done after using Eclipse formatting tool, like wrapping long lines (mostly comments).
BUG=issue1024
Review URL: https://webrtc-codereview.appspot.com/1342004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3946 4adac7df-926f-26a2-2b94-8c16560cd09d
