Read using capacity() method, write using set_buffer() method. This is
a preparation for making the member private, and renaming it to
capacity_.
Bug: webrtc:9378
Change-Id: I2f96679d052a83fe81be40301bd9863c87074640
Reviewed-on: https://webrtc-review.googlesource.com/c/113520
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25934}
- Enable vp9 flexible mode in VideoEngine if 3 spatial layers are set.
- Enable flexible mode in loopback tools and quality tests.
- Reset first active spatial layer on keyframe in encoder.
- Ensure duplicate references are not set by the sender in video header.
- Set references manually for flexible mode in vp9 encoder.
- Delay new activated layers until next base layer frame.
- On receive side put each spatial layer as a separate frame to FrameBuffer
and return several frames combined from FrameBuffer.
Bug: webrtc:10049,webrtc:9794,webrtc:9784
Change-Id: I01e69f134cc145deba666ccc92deb1d37a324ede
Reviewed-on: https://webrtc-review.googlesource.com/c/112289
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25895}
kInvalid does not have a corresponding entry in the standard is therefore removed.
kUNSPECIFIED should be used instead.
Bug: webrtc:8651
Change-Id: Iee8cd85830aedaa4a9102251121b9975d40fa5e2
Reviewed-on: https://webrtc-review.googlesource.com/c/112421
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Johannes Kron <kron@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25871}
This is the first step in moving the metadata and eventually replacing
VideoEncoderFactory::QueryVideoEncoder with VideoEncoder::GetEncoderInfo.
Bug: webrtc:10065
Change-Id: If925b895718e1b1225d2cf49bede1adb3ff281b8
Reviewed-on: https://webrtc-review.googlesource.com/c/112285
Commit-Queue: Mirta Dvornicic <mirtad@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25856}
- Enable flexible mode in loopback tools and quality tests
- Ensure duplicate references are not set by the sender in video header
- Reset first active spatial layer on keyframe in encoder
- Make vp9 encoder to not generate spatial references for first active
layer with external reference control in svc flexible mode
Bug: webrtc:10049
Change-Id: If9ff576ea8a1a2fef6116b17b5b5adff08c5f8c6
Reviewed-on: https://webrtc-review.googlesource.com/c/112080
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25795}
Pass encoded frames to packetizer immediately if encoder is configured
to drop whole superframe.
Bug: webrtc:9950
Change-Id: Iedee9618bb146307efd5a86cb35bf14b5e64b341
Reviewed-on: https://webrtc-review.googlesource.com/c/109002
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25771}
Move HdrMetadata to ColorSpace as part of preparing for joint transmission
of these two objects.
Bug: webrtc:8651
Change-Id: Ie948011a2c0106d5967cb5ef3b9565217e798272
Reviewed-on: https://webrtc-review.googlesource.com/c/111481
Commit-Queue: Johannes Kron <kron@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25730}
Instead of optionally compile VP9 source files based on the value of
the GN argument 'rtc_libvpx_build_vp9', this CL uses the preprocessor
macro RTC_ENABLE_VP9 to decide if VP9 related code needs to be compiled
or not.
Bug: None
Change-Id: I5c1b69d7ec35e8446181d98c912277d0ae8fdba2
Reviewed-on: https://webrtc-review.googlesource.com/c/111063
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25685}
The SetChannelParameters function was used when WebRTC supported decoding
with errors, which we no longer do.
This cleanup CL is related to the work tracked by 9946.
Bug: webrtc:9946
Change-Id: Id2d5ed23031388f890c42651bfbe5f79eda701e5
Reviewed-on: https://webrtc-review.googlesource.com/c/108861
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25505}
This deprecates the following methods in VideoEncoder:
virtual ScalingSettings GetScalingSettings() const;
virtual bool SupportsNativeHandle() const;
virtual const char* ImplementationName() const;
Though they are not marked RTC_DEPRECATED since we still want to call
them from within the default GetEncoderInfo() until downstream
projects have been updated.
Furthmore, implementation name is changed from const char* to
std:string, which prevents some lifetime issues with dynamic encoder
names, and CodecSpecificInfo.codec_name is removed in favor of getting
the implementation name via GetEncoderInfo().
This CL removes calls to these deprecated methods, follow-ups will also
remove implementations of the methods and replace them with new
GetEncoderInfo() substitutions.
Bug: webrtc:9890
Change-Id: I6fd6e531480c0b952f53dbd5105e0b0adc3e3b0c
Reviewed-on: https://webrtc-review.googlesource.com/c/106905
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25351}
Set number of decode threads equal to number of available cores and
limit the maximum value to the maximum number of tiles possible for
HD resolution.
Bug: webrtc:9829, b/117291409
Change-Id: Ib5ccd5cc412011d4438258491efc060cdd050fc7
Reviewed-on: https://webrtc-review.googlesource.com/c/104064
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25059}
- Added field trial to force issuing of key frame on deactivation of
spatial layer. This fixes video corruptions in VP9 K-SVC tests where
layers can be activated/deactivated on-fly due to bandwidth change.
- Added 100ms network delay to the test with restricted link capacity.
This fixes rapid drop of available bandwidth which happens when
bandwidth overuse is detected in the very beginning of call and several
feedback packets arrive without any delay. Also, this makes the test
more realistic.
- Disabled filtering of spatial layer in the test with restricted
link capacity. 1) We don't really need filtering in this test.
2) It appeared that in video quality tests filtering is done before
sending packets to network simulator. Filtering of high layers causes
channel underuse which is compensated by increase of sent bitrate.
This is why we got sent/media bitrates about 2Mbps in test where link
was limited to 1Mbps.
Bug: chromium:889017
Change-Id: I33ffcee0274523f6183c3bbd27d3d29395417d52
Reviewed-on: https://webrtc-review.googlesource.com/c/103520
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24988}
Mark all low spatial layer frames as references (not just frames of
active low spatial layers) if inter-layer prediction is enabled since
these frames are indirect references of high spatial layer, which can
later be enabled without key frame.
Bug: webrtc:9782
Change-Id: Iffa5039fab2673a5582e7cdc9be4a36d9e8deb63
Reviewed-on: https://webrtc-review.googlesource.com/102063
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24849}
VP9 frame rate controller is supposed to be used in screen mode only
but it was partially enabled in normal video mode. This restricts use
of VP9 frame rate controller to screen mode.
Bug: chromium:884164
Change-Id: Ie2eaa31f3364a8abccbc4171007708cf7040fc38
Reviewed-on: https://webrtc-review.googlesource.com/100424
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24769}
Set target frame rate of spatial layer equal to minimum of two: maximum
frame rate of layer (SpatialLayer::maxFramerate) and maximum frame rate
of codec (VideoCodec::maxFramerate).
Bug: webrtc:9740, webrtc:9739, chromium:882358
Change-Id: I34f36e7fd2889f0417474347abab5327fa2d9d7c
Reviewed-on: https://webrtc-review.googlesource.com/99501
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24686}
This is a reland of ae9e188e67a489db597224e3cfcfdee04edf0cba
Original change's description:
> Frame rate controller per spatial layer.
>
> This allows VP9 encoder wrapper to control frame rate of each spatial
> layer. The wrapper configures encoder to skip encoding spatial layer
> when actual frame rate exceeds the target frame rate of that layer.
> Target frame rate of high spatial layer is expected to be equal or
> higher then that of low spatial layer. For now frame rate controller
> is only enabled in screen sharing mode.
>
> Added unit test which configures encoder to produce 3 spatial layers
> with frame rates 10, 20 and 30fps and verifies that absolute delta of
> final and target rate doesn't exceed 10%.
>
> Bug: webrtc:9682
> Change-Id: I7a7833f63927dd475e7b42d43e4d29061613e64e
> Reviewed-on: https://webrtc-review.googlesource.com/96640
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24593}
TBR=sprang@webrtc.org
Bug: webrtc:9682
Change-Id: Idcce315890c79301da532f9ba4997e9606f73fb0
Reviewed-on: https://webrtc-review.googlesource.com/99340
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24669}
This reverts commit ae9e188e67a489db597224e3cfcfdee04edf0cba.
Reason for revert: Verify if this causes chromium:882358.
Original change's description:
> Frame rate controller per spatial layer.
>
> This allows VP9 encoder wrapper to control frame rate of each spatial
> layer. The wrapper configures encoder to skip encoding spatial layer
> when actual frame rate exceeds the target frame rate of that layer.
> Target frame rate of high spatial layer is expected to be equal or
> higher then that of low spatial layer. For now frame rate controller
> is only enabled in screen sharing mode.
>
> Added unit test which configures encoder to produce 3 spatial layers
> with frame rates 10, 20 and 30fps and verifies that absolute delta of
> final and target rate doesn't exceed 10%.
>
> Bug: webrtc:9682
> Change-Id: I7a7833f63927dd475e7b42d43e4d29061613e64e
> Reviewed-on: https://webrtc-review.googlesource.com/96640
> Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24593}
TBR=sprang@webrtc.org,ssilkin@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:9682, chromium:882358
Change-Id: Idc4051eef72104823038ed9139bb9c75018f7d86
Reviewed-on: https://webrtc-review.googlesource.com/99082
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24646}
This allows VP9 encoder wrapper to control frame rate of each spatial
layer. The wrapper configures encoder to skip encoding spatial layer
when actual frame rate exceeds the target frame rate of that layer.
Target frame rate of high spatial layer is expected to be equal or
higher then that of low spatial layer. For now frame rate controller
is only enabled in screen sharing mode.
Added unit test which configures encoder to produce 3 spatial layers
with frame rates 10, 20 and 30fps and verifies that absolute delta of
final and target rate doesn't exceed 10%.
Bug: webrtc:9682
Change-Id: I7a7833f63927dd475e7b42d43e4d29061613e64e
Reviewed-on: https://webrtc-review.googlesource.com/96640
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24593}
This is a reland of da0898dfae3b0a013ca8ad3828e9adfdc749748d
Original change's description:
> Add spatial index to EncodedImage.
>
> Replaces the VP8 simulcast index and VP9 spatial index formely part of
> CodecSpecificInfo.
>
> Bug: webrtc:9378
> Change-Id: I80eafd63fbdee0a25864338196a690628b4bd3d2
> Reviewed-on: https://webrtc-review.googlesource.com/83161
> Commit-Queue: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Sebastian Jansson <srte@webrtc.org>
> Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
> Reviewed-by: Philip Eliasson <philipel@webrtc.org>
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24485}
Tbr: magjed@webrtc.org
Bug: webrtc:9378
Change-Id: Iff20b656581ef63317e073833d1a326f7118fdfd
Reviewed-on: https://webrtc-review.googlesource.com/96780
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24507}
- Allow use of flexible mode which was blocked in webrtc:9261 since it
only worked together with old screen sharing. Since webrtc:9244 flexible mode
works with both normal and screen coding modes.
- Add unit test that checks that reference list encoder writes into RTP
payload descriptor and the predefined one match.
Bug: webrtc:9585
Change-Id: I4a1bdc51cbf15e7224cc7c271af8b2e3d46657d1
Reviewed-on: https://webrtc-review.googlesource.com/94778
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24355}
Intention is to make the member private, but downstream callers
must be updated to use the accessor methods first.
Bug: webrtc:9378
Change-Id: I3495bd8d545b7234fbea10abfd14f082caa420b6
Reviewed-on: https://webrtc-review.googlesource.com/82160
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24352}
It didn't account for implicit bitrate allocation, which is used in
some unit tests, when bitrate distribution is done by the encoder
wrapper.
Bug: none
Change-Id: I8fcf28e10f7a6c378580ef917221ad5c8d3869c9
Reviewed-on: https://webrtc-review.googlesource.com/94775
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24343}
This CL is the first step for introducing color space information in webrtc.
- Add ColorSpace class listing color profiles.
- Add ColorSpace as a member of webrtc::VideoFrame.
- Make use of this class by extracting info from VP9 decoder.
Bug: webrtc:9522
Change-Id: I5e2514efee2a193bddb4459261387f2d40e936ad
Reviewed-on: https://webrtc-review.googlesource.com/88540
Reviewed-by: Niklas Enbom <niklas.enbom@webrtc.org>
Reviewed-by: Magnus Jedvert <magjed@webrtc.org>
Commit-Queue: Emircan Uysaler <emircan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23988}
This CL adds VP9 profile information in SDP. It adds the necessary fields and
enums to codec containers.
Additional profiles will be followed.
Bug: webrtc:9376
Change-Id: I78574714f06f8087262a71dd64c01f31a229dd54
Reviewed-on: https://webrtc-review.googlesource.com/81960
Reviewed-by: Taylor (left Google) <deadbeef@webrtc.org>
Reviewed-by: Niklas Enbom <niklas.enbom@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Emircan Uysaler <emircan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23810}
The variable, num_active_spatial_layers, is used to construct ssData.
This CL reverts two instances of num_active_spatial_layers not
related to ssData construction.
Bug: None
Change-Id: I4d90d4578684dfdf8bd5a39c7a2fe778fce4414c
Reviewed-on: https://webrtc-review.googlesource.com/85643
Commit-Queue: Michael Horowitz <mhoro@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23756}
When GetSvcConfig returned fewer spatial layers than the number
statically configured from the test, we would crash on a SIGFPE.
This is not a problem in the production code, since there we
reset the encoder with the correct number of spatial layers
whenever the resolution changes.
Bug: None
Change-Id: I339e4a3c0fa993c7c649533c0eae71e1314194e7
Reviewed-on: https://webrtc-review.googlesource.com/85374
Reviewed-by: Michael Horowitz <mhoro@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23741}
Added distinction between number of configured and number of actively
encoded spatial layers and include number of actively encoded spatial
layers in ssData. Modified layer_filtering_transport.cc test to
parse from the RTP header and use the number of actively encoded
spatial layers for filtering spatial video layers.
Bug: webrtc:9425
Change-Id: Ic9f8895ab08b0626f9bb53a75ec33d8e7eb8706e
Reviewed-on: https://webrtc-review.googlesource.com/84243
Commit-Queue: Michael Horowitz <mhoro@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23716}
Running clang-format with chromium's style guide.
The goal is n-fold:
* providing consistency and readability (that's what code guidelines are for)
* preventing noise with presubmit checks and git cl format
* building on the previous point: making it easier to automatically fix format issues
* you name it
Please consider using git-hyper-blame to ignore this commit.
Bug: webrtc:9340
Change-Id: I694567c4cdf8cee2860958cfe82bfaf25848bb87
Reviewed-on: https://webrtc-review.googlesource.com/81185
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23660}
