The file was aldready pruned down to the point where it only included
webrtc/typedefs.h. Therefore, all includes of
voice_engine_configurations.h are replaced with typedefs.h, except on
two occasions where it was obvously not needed.
BUG=webrtc:6506
Review-Url: https://codereview.webrtc.org/2553583002
Cr-Commit-Position: refs/heads/master@{#15547}
There's no longer any need to make the two arguments have the same
signedness, so we can drop the "u" suffix on literal integer
arguments.
NOPRESUBMIT=true
BUG=webrtc:6645
Review-Url: https://codereview.webrtc.org/2535593002
Cr-Commit-Position: refs/heads/master@{#15280}
This gets rid of a bit of codec-specific code in VoE.
BUG=webrtc:5805
Review-Url: https://codereview.webrtc.org/2355483003
Cr-Commit-Position: refs/heads/master@{#14614}
This CL deletes the old and not used video defines in
engine_configurations.h and pre-pends voice_ to indicate there are only
voice/audio defines left in the file.
BUG=none
R=solenberg@webrtc.org
Review URL: https://codereview.webrtc.org/2401673002 .
Cr-Commit-Position: refs/heads/master@{#14558}
Updating GN files, include paths, and include guards
BUG=None
NOTRY=True
NOPRESUBMIT=true
Review-Url: https://codereview.webrtc.org/2387113005
Cr-Commit-Position: refs/heads/master@{#14542}
NetEq already uses SdpAudioFormat internally; this CL adds an
AudioCodingModule::RegisterReceiveCodec overload that accepts
SdpAudioFormat, and propagates it through AcmReceiver into NetEq.
The intention is to get rid of the other ways to specify decoders and
always use SdpAudioFormat. (And eventually to do the same for encoders
too.)
NOTRY=true
BUG=5801
Review-Url: https://codereview.webrtc.org/2365653004
Cr-Commit-Position: refs/heads/master@{#14506}
The former is always defined (by webrtc/base/checks.h) to either 0 or
1, whereas the latter isn't necessarily defined.
NOTRY=true
BUG=webrtc:6451
Review-Url: https://codereview.webrtc.org/2384693002
Cr-Commit-Position: refs/heads/master@{#14474}
It's a very general type, and we're about to start needing it in other
places besides AudioCodingModule.
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2380463003
Cr-Commit-Position: refs/heads/master@{#14423}
NetEqDecoder is still used in the external interfaces, but this change
opens up the ability to use SdpAudioFormats directly, once appropriate
interfaces have been added.
BUG=webrtc:5805
Review-Url: https://codereview.webrtc.org/2355503002
Cr-Commit-Position: refs/heads/master@{#14368}
It requires a new NetEq method, but it can no longer fail. And we no
longer need to use AcmReceiver::decoders_, which we're trying to
eliminate.
(This is a re-land of https://codereview.webrtc.org/2342313002.)
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2348233002
Cr-Commit-Position: refs/heads/master@{#14304}
This change adds a new statistic for logging how many calls to
NetEq::GetAudio resulted in a "muted output". A muted output happens
if the packet stream has been dead for some time (and the last decoded
packet was not comfort noise).
BUG=webrtc:5606
BUG=b/31256483
Review-Url: https://codereview.webrtc.org/2341293002
Cr-Commit-Position: refs/heads/master@{#14302}
Reason for revert:
Seems to have broken Chromium tests.
Original issue's description:
> AcmReceiver: Look up last decoder in NetEq's table of decoders
>
> AcmReceiver::decoders_ is now one step closer to being unused.
>
> BUG=webrtc:5801
>
> Committed: https://crrev.com/1e4d8b574cde64d93b98d89c7b817fb93185a307
> Cr-Commit-Position: refs/heads/master@{#14274}
TBR=ossu@webrtc.org,henrik.lundin@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2348123002
Cr-Commit-Position: refs/heads/master@{#14279}
Reason for revert:
Seems to have broken Chromium tests.
Original issue's description:
> AcmReceiver: Ask NetEq to delete all decoders at once instead of one by one
>
> It requires a new NetEq method, but it can no longer fail. And we no
> longer need to use AcmReceiver::decoders_, which we're trying to
> eliminate.
>
> BUG=webrtc:5801
>
> Committed: https://crrev.com/f6232b43a176e1717354b671a0a52b887d70de59
> Cr-Commit-Position: refs/heads/master@{#14275}
TBR=ossu@webrtc.org,henrik.lundin@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2349973002
Cr-Commit-Position: refs/heads/master@{#14278}
Reason for revert:
Seems to have broken Chromium tests.
Original issue's description:
> AcmReceiver::DecoderByPayloadType: Ask NetEq for decoder
>
> Instead of looking in AcmReceiver::decoders_, which we're trying to
> get rid of.
>
> BUG=webrtc:5801
>
> Committed: https://crrev.com/07772e4738ef8007280f97a0245eef34b9ca9391
> Cr-Commit-Position: refs/heads/master@{#14276}
TBR=ossu@webrtc.org,henrik.lundin@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2346173002
Cr-Commit-Position: refs/heads/master@{#14277}
Instead of looking in AcmReceiver::decoders_, which we're trying to
get rid of.
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2341283002
Cr-Commit-Position: refs/heads/master@{#14276}
It requires a new NetEq method, but it can no longer fail. And we no
longer need to use AcmReceiver::decoders_, which we're trying to
eliminate.
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2342313002
Cr-Commit-Position: refs/heads/master@{#14275}
AcmReceiver::decoders_ is now one step closer to being unused.
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2339953002
Cr-Commit-Position: refs/heads/master@{#14274}
This adds a new file, webrtc/modules/audio_coding/neteq/tools/packet_source.cc, so that I'll have somewhere to put the new non-inlined methods.
NOTRY=true
BUG=webrtc:163
Review-Url: https://codereview.webrtc.org/2290593002
Cr-Commit-Position: refs/heads/master@{#13956}
Checksums were updated for NetEq and ACM bitexactness tests (after
verifying the audio quality).
BUG=webrtc:5447
Review-Url: https://codereview.webrtc.org/2266293005
Cr-Commit-Position: refs/heads/master@{#13928}
The new method returns the current total delay (packet buffer and sync
buffer) in ms, with smoothing applied to even out short-time
fluctuations due to jitter. The packet buffer part of the delay is not
updated during DTX/CNG periods.
This CL also pipes the new metric through ACM and uses it in
VoiceEngine. It replaces the previous method of estimating the buffer
delay (where an inserted packet's RTP timestamp was compared with the
last played timestamp from NetEq). The new method works better under
periods of DTX/CNG.
Review-Url: https://codereview.webrtc.org/2262203002
Cr-Commit-Position: refs/heads/master@{#13855}
These tests will be reenabled and fixed after Opus 1.1.3 has landed in
Chromium and is rolled into WebRTC.
BUG=
Review-Url: https://codereview.webrtc.org/2185673002
Cr-Commit-Position: refs/heads/master@{#13534}
I'll be rewriting AcmReceiver soon and am trying to reduce the amount of
old stuff that needs to be supported.
I've manually checked the outputs of the AcmReceiver bitexactness
tests with this change. A large part of the tests are still bitexact,
with one section only differing slightly in timings. Nothing audible
unless playing the old and new versions back simultaneously.
The output of NetEqDecoderTest were also changed due to this CL, although only on android. I built and ran the test locally and compared the audio output manually - the changes were the same as for the other tests; i.e. very slight timing changes for a part of the output.
I updated the network stats checksum for android without analyzing it further. I expect it goes hand-in-hand with the changes to the output; i.e. the changes in it are fine because the audio output is fine. Likely, the stats will show changes in the usage of CNG, since that is what the code changes.
BUG=webrtc:1361
Review-Url: https://codereview.webrtc.org/2117763002
Cr-Commit-Position: refs/heads/master@{#13415}
There was a fast path in PreprocessToAddData that would just use the
input timestamps if the input format was equal to the required format of
the encoder. This works well as long as the codec never changes. If we
are first doing resampling (specifically upsampling) and then change to
a codec that does not require resampling, we'll need to stick to
whatever input timestamp we left off at, rather than silently accepting
whatever we're sent.
BUG=622435
Review-Url: https://codereview.webrtc.org/2119393002
Cr-Commit-Position: refs/heads/master@{#13398}
If the specification for the speech encoder hasn't changed, we should
reuse it instead of recreating it. Otherwise, we lose its state. (This
problem was originally discovered because AudioEncoderOpus instances
would forget that they were supposed to be using DTX.)
BUG=webrtc:6020, chromium:622647
Review-Url: https://codereview.webrtc.org/2089183002
Cr-Commit-Position: refs/heads/master@{#13273}
AudioCodingModuleImpl is the only implementation of the
AudioCodingModule interface (except for test mocks). So it's a good
fit to put it in an anonymous namespace in the interface's .cc file,
to ensure that no one except AudioCodingModule::Create ever references
it.
Except for moving code, this CL introduces two other small changes:
* It cleans up the set of #includes in audio_coding_module.cc.
Specifically, I removed #includes that were already present in
audio_coding_module.h, and did not bring along any #includes from
audio_coding_module_impl.h and .cc except those that were
necessary to get it to compile.
* It moves AudioCodingModuleImpl from the webrtc::acm2 to the
webrtc::<anonymous> namespace. This means I had to qualify a few
things it references with acm2::.
Review-Url: https://codereview.webrtc.org/2069723003
Cr-Commit-Position: refs/heads/master@{#13191}
This gets rid of the complex & icky state where the sample rate is not
yet determined.
BUG=webrtc:5801
Review-Url: https://codereview.webrtc.org/2020353003
Cr-Commit-Position: refs/heads/master@{#13011}
