Non-global logging isn't supported, and having a per-call logging
dispatch seems over-eager and adds more complexity than it's worth. The
current implementation is racy on initialization due to missing atomics
support. Besides, logging support should be separate from use of Call.
R=mflodman@webrtc.org
BUG=3250,3157
Review URL: https://webrtc-codereview.appspot.com/12329006
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5971 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL brought to you by:
$ for d in $(for f in $(git ls-files '*gyp' '*gypi'); do dirname $f; done|sort|uniq|grep -v '^\.$'); do echo -e "\n# These are for the common case of adding or renaming files. If you're doing\n# structural changes, please get a review from a reviewer in this file.\nper-file *.gyp=*\nper-file *.gypi=*" >> $d/OWNERS; done
$ for d in $(for f in $(git ls-files '*gyp' '*gypi'); do dirname $f; done|sort|uniq|grep -v '^\.$'); do git add $d/OWNERS; done
(and then removed the talk/ impact)
R=niklas.enbom@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11969004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5903 4adac7df-926f-26a2-2b94-8c16560cd09d
Modify bitrate controller to update bitrate based on process call and not
only whenever a RTCP receiver block is received.
Additionally:
Add condition to only start rampup after a receiver block is received. This was same as old behaviour but now an explicit check is needed to verify process does not ramps up before the first block.
Fix logic around capping max bitrate increase at 8% per second. Before it was only increasing once every 1 second and each increase would be as high as 8%. If receiver blocks had a different interval before it would lose an update or waste an update slot and not ramp up as much as a 8% (e.g. if RTCP received < 1 second).
Did not touch decrease logic, however since it can be triggered more often it
may decrease much faster and closer to the original written cap of once every
300ms + rtt.
Note:
rampup_tests.cc don't seem to be affected by this since there is no packet loss or REMB that go higher than expected cap.
bitrate_controller_unittests.cc are don't really simulate a clock and the process thread, but trigger update by inserting an rtcp block.
BUG=3065
R=stefan@webrtc.org, mflodman@webrtc.org
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5794 4adac7df-926f-26a2-2b94-8c16560cd09d
This triggered an occasional TSAN failure in
CallTest.ReceivesPliAndRecoversWithNack e.g.:
http://build.chromium.org/p/client.webrtc/builders/Linux%20Tsan/builds/1444/steps/memory%20test%3A%20video_engine_tests/logs/stdio
I managed to reproduce this locally and verified that reverting this CL
corrected it.
> Modify bitrate controller to update bitrate based on process call and not
> only whenever a RTCP receiver block is received.
>
> Additionally:
> Add condition to only start rampup after a receiver block is received. This was same as old behaviour but now an explicit check is needed to verify process does not ramps up before the first block.
>
> Fix logic around capping max bitrate increase at 8% per second. Before it was only increasing once every 1 second and each increase would be as high as 8%. If receiver blocks had a different interval before it would lose an update or waste an update slot and not ramp up as much as a 8% (e.g. if RTCP received < 1 second).
>
> Did not touch decrease logic, however since it can be triggered more often it
> may decrease much faster and closer to the original written cap of once every
> 300ms + rtt.
>
> Note:
> rampup_tests.cc don't seem to be affected by this since there is no packet loss or REMB that go higher than expected cap.
> bitrate_controller_unittests.cc are don't really simulate a clock and the process thread, but trigger update by inserting an rtcp block.
>
> BUG=3065
> R=stefan@webrtc.org, mflodman@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/10529004TBR=andresp@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10079005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5785 4adac7df-926f-26a2-2b94-8c16560cd09d
only whenever a RTCP receiver block is received.
Additionally:
Add condition to only start rampup after a receiver block is received. This was same as old behaviour but now an explicit check is needed to verify process does not ramps up before the first block.
Fix logic around capping max bitrate increase at 8% per second. Before it was only increasing once every 1 second and each increase would be as high as 8%. If receiver blocks had a different interval before it would lose an update or waste an update slot and not ramp up as much as a 8% (e.g. if RTCP received < 1 second).
Did not touch decrease logic, however since it can be triggered more often it
may decrease much faster and closer to the original written cap of once every
300ms + rtt.
Note:
rampup_tests.cc don't seem to be affected by this since there is no packet loss or REMB that go higher than expected cap.
bitrate_controller_unittests.cc are don't really simulate a clock and the process thread, but trigger update by inserting an rtcp block.
BUG=3065
R=stefan@webrtc.org, mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10529004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5775 4adac7df-926f-26a2-2b94-8c16560cd09d
Disabling as bots are turning red. This should be because
VideoSendStream::ReconfigureVideoCodec caps video_codec.startBitrate to
max bitrates and as the start bitrate is just enough to transmit there
might be some rounding errors here causing the top stream not to be
sent. Since no REMB is received (send-side test) this remains as the
transmit bitrate.
I need some more time to figure out if this is the case so I'm disabling
these for now to avoid reverting the big CL. VideoSendStreams aren't
used in production yet.
TBR=mflodman@webrtc.org
BUG=3078
Review URL: https://webrtc-codereview.appspot.com/10229005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5727 4adac7df-926f-26a2-2b94-8c16560cd09d
New interface uses two bitrates (max/min). The pace multiplier is also
removed from the interface and instead utilized outside. Min bitrate
will be filled with padding if there's not enough media to transmit.
Also fixes a bug in minimum transmission bitrate that made it ignore
REMBs. A regression test has been added to catch it.
BUG=3014
R=mflodman@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10059004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5723 4adac7df-926f-26a2-2b94-8c16560cd09d
Replaces VideoCodec in VideoSendStream::Config with an EncoderSettings
struct. The EncoderSettings struct uses an external encoder for all
codecs. This means that external users, such as libjingle, will provide
the encoders themselves, removing the previous distinction of internal
and external codecs.
For now VideoSendStream translates to VideoCodec internally. In the
interrim (before the corresponding change is implemented in
VideoReceiveStream) tests convert EncoderSettings to VideoCodecs.
Removes Call::GetVideoCodecs().
Disables RampUpTest.WithPacingAndRtx as its further exposed with changes
to bitrates used in tests.
BUG=2854,2992
R=mflodman@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/7919004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5722 4adac7df-926f-26a2-2b94-8c16560cd09d
The CL was reverted in r5712, due to bots going red. However, these bots
are unrelated to this CL.
Original description:
VideoSendStreamTest.SuspendBelowMinBitrate was flaky. The problem was
that when the first non-padding packet was sent after the stream was
resumed, the statistics had not always been updated so that
stats.suspended was false. After seeing the first non-padding packet
after suspension, the test will now go into a state where it waits for
the statistics to be changed.
BUG=3068
R=pbos@webrtc.orgTBR=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10099004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5713 4adac7df-926f-26a2-2b94-8c16560cd09d
VideoSendStreamTest.SuspendBelowMinBitrate was flaky. The problem was that when the first non-padding packet was sent after the stream was resumed, the statistics had not always been updated so that stats.suspended was false. After seeing the first non-padding packet after suspension, the test will now go into a state where it waits for the statistics to be changed.
BUG=3068
R=pbos@webrtc.orgTBR=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10069004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5711 4adac7df-926f-26a2-2b94-8c16560cd09d
We've had problems that seem to manifest in run_tests.mm getting stuck
on exit. For our automated test targets only full_stack.cc was making
use of the platform-specific renderers provided by webrtc_test_common
and since no one currently monitors these the use case is hypothetical.
Readding platform-specific renderers to video_loopback is tracked with
issue 3039, though as far as I'm aware no one's currently using the
video_loopback target.
BUG=2987
R=kjellander@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9789004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5686 4adac7df-926f-26a2-2b94-8c16560cd09d
The variable playout_timestamp_ was not updated to the latest decoded
timestamp while comfort noise was played. Instead, it was upadted using
dead reckoning, which caused it to drift away from the timestamps of the
incoming CNG packets. Now it is updated also during comfort noise
playout.
Since the change is only in NetEq4, this change also makes the test
PlaysOutAudioAndVideoInSync use both ACM1/NetEq3 and ACM2/NetEq4.
Re-enabling one NetEq unit test that is no longer failing thanks to this CL.
BUG=2932
R=stefan@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/8799004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5649 4adac7df-926f-26a2-2b94-8c16560cd09d
The new test is based upon the exisiting rampup test, but also adds
a low-rate period. The main purpose of the test is to verify the
SuspendBelowMinBitrate functionality, which must be enabled for the
test to pass.
The CL also adds a change to the min bitrate in the send-side bandwidth
estimator when SuspendBelowMinBitrate is enabled.
An anonymous namespace is added around the StreamObserver classes
in the test to avoid silent linker conflicts that could happen
otherwise.
Note: this CL depends on https://webrtc-codereview.appspot.com/9049004/
BUG=2636
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9059004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5646 4adac7df-926f-26a2-2b94-8c16560cd09d
