I used a command like this to update the paths:
perl -pi -e "s/webrtc\/base/webrtc\/rtc_base/g" `find webrtc/rtc_base -name "*.cc" -o -name "*.h"`
BUG=webrtc:7634
NOPRESUBMIT=True # cpplint errors that aren't caused by this CL.
Review-Url: https://codereview.webrtc.org/2969623003
Cr-Commit-Position: refs/heads/master@{#18870}
Patch set 1 is a reland + trivial rebase.
Patch set >= 2 contains bug fixes.
> Original issue's description:
> > Fix bug in vie_encoder.cc which caused channel parameters not to be updated at regular intervals, as it was intended.
> >
> > That however exposes a bunch of failed test, so this CL also fixed a few other things:
> > * FakeEncoder should trust the configured FPS value rather than guesstimating itself based on the realtime clock, so as not to completely undershoot targets in offline mode. Also, compensate for key-frame overshoots when outputting delta frames.
> > * FrameDropper should not assuming incoming frame rate is 0 if no frames have been seen.
> > * Fix a bunch of test cases that started failing because they were relying on the fake encoder undershooting.
> > * Fix test
> >
> > BUG=7664
> >
> > Review-Url: https://codereview.webrtc.org/2883963002
> > Cr-Commit-Position: refs/heads/master@{#18473}
> > Committed: 6431e21da6
BUG=webrtc:7664
Review-Url: https://codereview.webrtc.org/2953053002
Cr-Commit-Position: refs/heads/master@{#18782}
Timing information is gathered in EncodedImage,
starting at encoders. Then it's sent using RTP header extension. In the
end, it's gathered at the GenericDecoder. Actual reporting and tests
will be in the next CLs.
BUG=webrtc:7594
Review-Url: https://codereview.webrtc.org/2911193002
Cr-Commit-Position: refs/heads/master@{#18659}
Reason for revert:
Looks like there's still one failing perf test:
RampUpTest.UpDownUpTransportSequenceNumberPacketLoss
Original issue's description:
> Reland of Periodically update codec bit/frame rate settings. (patchset #1 id:1 of https://codereview.webrtc.org/2923993002/ )
>
> Reason for revert:
> Create reland cl that we can patch with fix.
>
> Original issue's description:
> > Revert of Periodically update codec bit/frame rate settings. (patchset #8 id:140001 of https://codereview.webrtc.org/2883963002/ )
> >
> > Reason for revert:
> > Breaks some Call perf tests that are not run by the try bots....
> >
> > Original issue's description:
> > > Fix bug in vie_encoder.cc which caused channel parameters not to be updated at regular intervals, as it was intended.
> > >
> > > That however exposes a bunch of failed test, so this CL also fixed a few other things:
> > > * FakeEncoder should trust the configured FPS value rather than guesstimating itself based on the realtime clock, so as not to completely undershoot targets in offline mode. Also, compensate for key-frame overshoots when outputting delta frames.
> > > * FrameDropper should not assuming incoming frame rate is 0 if no frames have been seen.
> > > * Fix a bunch of test cases that started failing because they were relying on the fake encoder undershooting.
> > > * Fix test
> > >
> > > BUG=7664
> > >
> > > Review-Url: https://codereview.webrtc.org/2883963002
> > > Cr-Commit-Position: refs/heads/master@{#18473}
> > > Committed: 6431e21da6
> >
> > TBR=stefan@webrtc.org,holmer@google.com
> > # Skipping CQ checks because original CL landed less than 1 days ago.
> > NOPRESUBMIT=true
> > NOTREECHECKS=true
> > NOTRY=true
> > BUG=7664
> >
> > Review-Url: https://codereview.webrtc.org/2923993002
> > Cr-Commit-Position: refs/heads/master@{#18475}
> > Committed: 5390c4814d
>
> TBR=stefan@webrtc.org,holmer@google.com
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=7664
>
> Review-Url: https://codereview.webrtc.org/2924023002
> Cr-Commit-Position: refs/heads/master@{#18497}
> Committed: cdafeda1cbTBR=stefan@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=7664
Review-Url: https://codereview.webrtc.org/2926283002
Cr-Commit-Position: refs/heads/master@{#18500}
Reason for revert:
Create reland cl that we can patch with fix.
Original issue's description:
> Revert of Periodically update codec bit/frame rate settings. (patchset #8 id:140001 of https://codereview.webrtc.org/2883963002/ )
>
> Reason for revert:
> Breaks some Call perf tests that are not run by the try bots....
>
> Original issue's description:
> > Fix bug in vie_encoder.cc which caused channel parameters not to be updated at regular intervals, as it was intended.
> >
> > That however exposes a bunch of failed test, so this CL also fixed a few other things:
> > * FakeEncoder should trust the configured FPS value rather than guesstimating itself based on the realtime clock, so as not to completely undershoot targets in offline mode. Also, compensate for key-frame overshoots when outputting delta frames.
> > * FrameDropper should not assuming incoming frame rate is 0 if no frames have been seen.
> > * Fix a bunch of test cases that started failing because they were relying on the fake encoder undershooting.
> > * Fix test
> >
> > BUG=7664
> >
> > Review-Url: https://codereview.webrtc.org/2883963002
> > Cr-Commit-Position: refs/heads/master@{#18473}
> > Committed: 6431e21da6
>
> TBR=stefan@webrtc.org,holmer@google.com
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=7664
>
> Review-Url: https://codereview.webrtc.org/2923993002
> Cr-Commit-Position: refs/heads/master@{#18475}
> Committed: 5390c4814dTBR=stefan@webrtc.org,holmer@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=7664
Review-Url: https://codereview.webrtc.org/2924023002
Cr-Commit-Position: refs/heads/master@{#18497}
Reason for revert:
Breaks some Call perf tests that are not run by the try bots....
Original issue's description:
> Fix bug in vie_encoder.cc which caused channel parameters not to be updated at regular intervals, as it was intended.
>
> That however exposes a bunch of failed test, so this CL also fixed a few other things:
> * FakeEncoder should trust the configured FPS value rather than guesstimating itself based on the realtime clock, so as not to completely undershoot targets in offline mode. Also, compensate for key-frame overshoots when outputting delta frames.
> * FrameDropper should not assuming incoming frame rate is 0 if no frames have been seen.
> * Fix a bunch of test cases that started failing because they were relying on the fake encoder undershooting.
> * Fix test
>
> BUG=7664
>
> Review-Url: https://codereview.webrtc.org/2883963002
> Cr-Commit-Position: refs/heads/master@{#18473}
> Committed: 6431e21da6TBR=stefan@webrtc.org,holmer@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=7664
Review-Url: https://codereview.webrtc.org/2923993002
Cr-Commit-Position: refs/heads/master@{#18475}
That however exposes a bunch of failed test, so this CL also fixed a few other things:
* FakeEncoder should trust the configured FPS value rather than guesstimating itself based on the realtime clock, so as not to completely undershoot targets in offline mode. Also, compensate for key-frame overshoots when outputting delta frames.
* FrameDropper should not assuming incoming frame rate is 0 if no frames have been seen.
* Fix a bunch of test cases that started failing because they were relying on the fake encoder undershooting.
* Fix test
BUG=7664
Review-Url: https://codereview.webrtc.org/2883963002
Cr-Commit-Position: refs/heads/master@{#18473}
Reason for revert:
Breaks android buildbots.
Original issue's description:
> Reland of Add content type information to encoded images and corresponding rtp extension header (patchset #1 id:1 of https://codereview.webrtc.org/2816463002/ )
>
> Reason for revert:
> Reland with appropriate changes to API to not break depending projects.
>
> Original issue's description:
> > Revert of Add content type information to encoded images and corresponding rtp extension header (patchset #31 id:600001 of https://codereview.webrtc.org/2772033002/ )
> >
> > Reason for revert:
> > Breaks dependent projects.
> >
> > Original issue's description:
> > > Add content type information to Encoded Images and add corresponding RTP extension header.
> > > Use it to separate UMA e2e delay metric between screenshare from video.
> > > Content type extension is set based on encoder settings and processed and decoders.
> > >
> > > Also,
> > > Fix full-stack-tests to calculate RTT correctly, so new metric could be tested.
> > >
> > > BUG=webrtc:7420
> > >
> > > Review-Url: https://codereview.webrtc.org/2772033002
> > > Cr-Commit-Position: refs/heads/master@{#17640}
> > > Committed: 64e739aeae
> >
> > TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
> > # Skipping CQ checks because original CL landed less than 1 days ago.
> > NOPRESUBMIT=true
> > NOTREECHECKS=true
> > NOTRY=true
> > BUG=webrtc:7420
> >
> > Review-Url: https://codereview.webrtc.org/2816463002
> > Cr-Commit-Position: refs/heads/master@{#17644}
> > Committed: 5721866808
>
> TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:7420
>
> Review-Url: https://codereview.webrtc.org/2812913002
> Cr-Commit-Position: refs/heads/master@{#17651}
> Committed: 774f6b4b96TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:7420
Review-Url: https://codereview.webrtc.org/2809653004
Cr-Commit-Position: refs/heads/master@{#17653}
Reason for revert:
Reland with appropriate changes to API to not break depending projects.
Original issue's description:
> Revert of Add content type information to encoded images and corresponding rtp extension header (patchset #31 id:600001 of https://codereview.webrtc.org/2772033002/ )
>
> Reason for revert:
> Breaks dependent projects.
>
> Original issue's description:
> > Add content type information to Encoded Images and add corresponding RTP extension header.
> > Use it to separate UMA e2e delay metric between screenshare from video.
> > Content type extension is set based on encoder settings and processed and decoders.
> >
> > Also,
> > Fix full-stack-tests to calculate RTT correctly, so new metric could be tested.
> >
> > BUG=webrtc:7420
> >
> > Review-Url: https://codereview.webrtc.org/2772033002
> > Cr-Commit-Position: refs/heads/master@{#17640}
> > Committed: 64e739aeae
>
> TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:7420
>
> Review-Url: https://codereview.webrtc.org/2816463002
> Cr-Commit-Position: refs/heads/master@{#17644}
> Committed: 5721866808TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:7420
Review-Url: https://codereview.webrtc.org/2812913002
Cr-Commit-Position: refs/heads/master@{#17651}
Reason for revert:
Relanded by mistake.
Original issue's description:
> Reland of Add content type information to encoded images and corresponding rtp extension header (patchset #1 id:1 of https://codereview.webrtc.org/2816463002/ )
>
> Reason for revert:
> Reland with fixes which break API
>
> Original issue's description:
> > Revert of Add content type information to encoded images and corresponding rtp extension header (patchset #31 id:600001 of https://codereview.webrtc.org/2772033002/ )
> >
> > Reason for revert:
> > Breaks dependent projects.
> >
> > Original issue's description:
> > > Add content type information to Encoded Images and add corresponding RTP extension header.
> > > Use it to separate UMA e2e delay metric between screenshare from video.
> > > Content type extension is set based on encoder settings and processed and decoders.
> > >
> > > Also,
> > > Fix full-stack-tests to calculate RTT correctly, so new metric could be tested.
> > >
> > > BUG=webrtc:7420
> > >
> > > Review-Url: https://codereview.webrtc.org/2772033002
> > > Cr-Commit-Position: refs/heads/master@{#17640}
> > > Committed: 64e739aeae
> >
> > TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
> > # Skipping CQ checks because original CL landed less than 1 days ago.
> > NOPRESUBMIT=true
> > NOTREECHECKS=true
> > NOTRY=true
> > BUG=webrtc:7420
> >
> > Review-Url: https://codereview.webrtc.org/2816463002
> > Cr-Commit-Position: refs/heads/master@{#17644}
> > Committed: 5721866808
>
> TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:7420
>
> Review-Url: https://codereview.webrtc.org/2811963002
> Cr-Commit-Position: refs/heads/master@{#17645}
> Committed: 4fa0c4f97fTBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:7420
Review-Url: https://codereview.webrtc.org/2810923004
Cr-Commit-Position: refs/heads/master@{#17648}
Reason for revert:
Reland with fixes which break API
Original issue's description:
> Revert of Add content type information to encoded images and corresponding rtp extension header (patchset #31 id:600001 of https://codereview.webrtc.org/2772033002/ )
>
> Reason for revert:
> Breaks dependent projects.
>
> Original issue's description:
> > Add content type information to Encoded Images and add corresponding RTP extension header.
> > Use it to separate UMA e2e delay metric between screenshare from video.
> > Content type extension is set based on encoder settings and processed and decoders.
> >
> > Also,
> > Fix full-stack-tests to calculate RTT correctly, so new metric could be tested.
> >
> > BUG=webrtc:7420
> >
> > Review-Url: https://codereview.webrtc.org/2772033002
> > Cr-Commit-Position: refs/heads/master@{#17640}
> > Committed: 64e739aeae
>
> TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:7420
>
> Review-Url: https://codereview.webrtc.org/2816463002
> Cr-Commit-Position: refs/heads/master@{#17644}
> Committed: 5721866808TBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:7420
Review-Url: https://codereview.webrtc.org/2811963002
Cr-Commit-Position: refs/heads/master@{#17645}
Reason for revert:
Breaks dependent projects.
Original issue's description:
> Add content type information to Encoded Images and add corresponding RTP extension header.
> Use it to separate UMA e2e delay metric between screenshare from video.
> Content type extension is set based on encoder settings and processed and decoders.
>
> Also,
> Fix full-stack-tests to calculate RTT correctly, so new metric could be tested.
>
> BUG=webrtc:7420
>
> Review-Url: https://codereview.webrtc.org/2772033002
> Cr-Commit-Position: refs/heads/master@{#17640}
> Committed: 64e739aeaeTBR=tommi@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,nisse@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:7420
Review-Url: https://codereview.webrtc.org/2816463002
Cr-Commit-Position: refs/heads/master@{#17644}
Use it to separate UMA e2e delay metric between screenshare from video.
Content type extension is set based on encoder settings and processed and decoders.
Also,
Fix full-stack-tests to calculate RTT correctly, so new metric could be tested.
BUG=webrtc:7420
Review-Url: https://codereview.webrtc.org/2772033002
Cr-Commit-Position: refs/heads/master@{#17640}
Other minor changes:
- Define locks after stuff it is protecting
- Use explicit default dtors
- Replace unnecessary lock in DelayedEncoder with SequencedTaskChecker
BUG=webrtc:7130
Review-Url: https://codereview.webrtc.org/2686103002
Cr-Commit-Position: refs/heads/master@{#16554}
The MultithreadedFakeH264Encoder is a derived class from FakeEncoder
and FakeH264Encoder, and these should thus also be thread safe.
TESTED=Ran "out/Tsan/video_engine_tests --gtest_filter="*Multithreaded*" --gtest_repeat=100" with is_debug=false, dcheck_always_on=true, is_tsan=true.
BUG=webrtc:6943
Review-Url: https://codereview.webrtc.org/2604403003
Cr-Commit-Position: refs/heads/master@{#16093}
Reason for revert:
Failures on the Linux Memcheck bot
Original issue's description:
> This approach passes packetization mode to the encoder as part of
> a cricket::VideoCodec structure, rather than as part of struct VideoCodecH264 inside webrtc::VideoCodec.
>
> BUG=600254
>
> Committed: https://crrev.com/e59647b991f61cf1cf61b020356705e6c0f81257
> Cr-Commit-Position: refs/heads/master@{#15437}
TBR=hbos@webrtc.org,sprang@webrtc.org,mflodman@webrtc.org,magjed@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=600254
Review-Url: https://codereview.webrtc.org/2558453002
Cr-Commit-Position: refs/heads/master@{#15441}
a cricket::VideoCodec structure, rather than as part of struct VideoCodecH264 inside webrtc::VideoCodec.
BUG=600254
Review-Url: https://codereview.webrtc.org/2528343002
Cr-Commit-Position: refs/heads/master@{#15437}
This is yet another reland of https://codereview.webrtc.org/2434073003/
including two fixes:
1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that.
2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams.
Please review only the changes after patch set 1.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2510583002 .
Cr-Commit-Position: refs/heads/master@{#15105}
This approach extends the H.264 specific information with
a packetization mode enum.
Status: Parameter is in code. No way to set it yet.
Rebase of CL 2009213002
BUG=600254
Review-Url: https://codereview.webrtc.org/2337453002
Cr-Commit-Position: refs/heads/master@{#15032}
Reason for revert:
Seems to be causing flakiness in perf test:
FullStackTest.ScreenshareSlidesVP8_2TL_LossyNet
Original issue's description:
> Reland of Issue 2434073003: Extract bitrate allocation ...
>
> This is a reland of https://codereview.webrtc.org/2434073003/ including
> some fixes for failing test cases.
>
> Original description:
>
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/647bf43dcb2fd16fccf276bd94dc4400728bb405
> Cr-Commit-Position: refs/heads/master@{#15023}
TBR=mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2491393002
Cr-Commit-Position: refs/heads/master@{#15026}
This is a reland of https://codereview.webrtc.org/2434073003/ including
some fixes for failing test cases.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2488833004
Cr-Commit-Position: refs/heads/master@{#15023}
Reason for revert:
Breaks perf tests.
Original issue's description:
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/8f46c679d24a05b3f08e02c6d91ec9637f34e24f
> Cr-Commit-Position: refs/heads/master@{#14998}
TBR=stefan@webrtc.org,perkj@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2489843002
Cr-Commit-Position: refs/heads/master@{#15001}
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2434073003
Cr-Commit-Position: refs/heads/master@{#14998}
Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
These methods should no longer be used anywhere and it's safe to remove
them.
BUG=chromium:621691
Committed: https://crrev.com/c681250aaa2025836db7669694e323898e5c2ca7
Review-Url: https://codereview.webrtc.org/2405173006
Cr-Original-Commit-Position: refs/heads/master@{#14923}
Cr-Commit-Position: refs/heads/master@{#14935}
Reason for revert:
Still breaks internal downstream project.
Sergey: Please update internal project before relanding this.
Original issue's description:
> Remove deprected functions from EncodedImageCallback and RtpRtcp
>
> Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
> These methods should no longer be used anywhere and it's safe to remove
> them.
>
> BUG=chromium:621691
>
> Committed: https://crrev.com/c681250aaa2025836db7669694e323898e5c2ca7
> Cr-Commit-Position: refs/heads/master@{#14923}
TBR=mflodman@webrtc.org,stefan@webrtc.org,sergeyu@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2479643002
Cr-Commit-Position: refs/heads/master@{#14925}
Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
These methods should no longer be used anywhere and it's safe to remove
them.
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2405173006
Cr-Commit-Position: refs/heads/master@{#14923}
Reason for revert:
Breaks everything
Original issue's description:
> Revert of Remove deprected functions from EncodedImageCallback and RtpRtcp (patchset #4 id:100001 of https://codereview.webrtc.org/2405173006/ )
>
> Reason for revert:
> This might be breaking projects downstream.
>
> Original issue's description:
> > Remove deprected functions from EncodedImageCallback and RtpRtcp
> >
> > Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
> > These methods should no longer be used anywhere and it's safe to remove
> > them.
> >
> > BUG=chromium:621691
> >
> > Committed: https://crrev.com/fa565842718ad178a7562721b25d916fbabc2b92
> > Cr-Commit-Position: refs/heads/master@{#14902}
>
> TBR=mflodman@webrtc.org,stefan@webrtc.org,sergeyu@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=chromium:621691
>
> Committed: https://crrev.com/6c78307a21252c2dbd704f6d5e92a220fb722ed4
> Cr-Commit-Position: refs/heads/master@{#14914}
TBR=mflodman@webrtc.org,stefan@webrtc.org,sergeyu@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2467373003
Cr-Commit-Position: refs/heads/master@{#14915}
Reason for revert:
This might be breaking projects downstream.
Original issue's description:
> Remove deprected functions from EncodedImageCallback and RtpRtcp
>
> Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
> These methods should no longer be used anywhere and it's safe to remove
> them.
>
> BUG=chromium:621691
>
> Committed: https://crrev.com/fa565842718ad178a7562721b25d916fbabc2b92
> Cr-Commit-Position: refs/heads/master@{#14902}
TBR=mflodman@webrtc.org,stefan@webrtc.org,sergeyu@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2474433008
Cr-Commit-Position: refs/heads/master@{#14914}
Removed EncodedImageCallback::Encoded() and RtpRtcp::SendOutgoingData().
These methods should no longer be used anywhere and it's safe to remove
them.
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2405173006
Cr-Commit-Position: refs/heads/master@{#14902}
This removes the VideoSendStream::LoadObserver interface and the implementation in WebrtcVideoSendStream and replace it with VideoSinkWants through the VideoSourceInterface.
To do that that, some stats for CPU adaptation is moved into VideoSendStream. Also handling of the CVO rtp header extension is moved to VideoSendStreamImpl.
BUG=webrtc:5687
TBR=mflodman@webrtc.org
Review-Url: https://codereview.webrtc.org/2304363002
Cr-Commit-Position: refs/heads/master@{#14877}
cl was originally reviewed here:
https://codereview.webrtc.org/2060403002/
- Add task queue to Call with the intent of replacing the use of one of the process threads.
- Split VideoSendStream in two. VideoSendStreamInternal is created and used on the new task queue.
- BitrateAllocator is now created on libjingle's worker thread but always used on the new task queue instead of both encoder threads and the process thread.
- VideoEncoderConfig and VideoSendStream::Config support move semantics.
- The encoder thread is moved from VideoSendStream to ViEEncoder. Frames are forwarded directly to ViEEncoder which is responsible for timestamping ? and encoding the frames.
TBR=mflodman@webrtc.org
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/2250123002
Cr-Commit-Position: refs/heads/master@{#14014}
Reason for revert:
Failed on Win 10 Chrome FYI.
https://build.chromium.org/p/chromium.webrtc.fyi/builders/Win10%20Tester/builds/3847/steps/content_browsertests/logs/stdio
#
# Fatal error in e:\b\c\b\win_builder\src\third_party\webrtc\base\task_queue_win.cc, line 138
# last system error: 87
# Check failed: ((DWORD)0xFFFFFFFF) != result (4294967295 vs. 4294967295)
#
WebRtcBrowserTest
#
Original issue's description:
> - Add task queue to Call with the intent of replacing the use of one of the process threads.
>
> - Split VideoSendStream in two. VideoSendStreamInternal is created and used on the new task queue.
>
> - BitrateAllocator is now created on libjingle's worker thread but always used on the new task queue instead of both encoder threads and the process thread.
>
> - VideoEncoderConfig and VideoSendStream::Config support move semantics.
>
> - The encoder thread is moved from VideoSendStream to ViEEncoder. Frames are forwarded directly to ViEEncoder which is responsible for timestamping ? and encoding the frames.
>
> BUG=webrtc:5687
>
> Committed: https://crrev.com/cc168360f41322332860cb075edeb1cde21aa473
> Cr-Commit-Position: refs/heads/master@{#13767}
TBR=tommi@webrtc.org,mflodman@webrtc.org,stefan@webrtc.org,sprang@webrtc.org,pbos@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/2248713003
Cr-Commit-Position: refs/heads/master@{#13774}
- Split VideoSendStream in two. VideoSendStreamInternal is created and used on the new task queue.
- BitrateAllocator is now created on libjingle's worker thread but always used on the new task queue instead of both encoder threads and the process thread.
- VideoEncoderConfig and VideoSendStream::Config support move semantics.
- The encoder thread is moved from VideoSendStream to ViEEncoder. Frames are forwarded directly to ViEEncoder which is responsible for timestamping ? and encoding the frames.
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/2060403002
Cr-Commit-Position: refs/heads/master@{#13767}
