The main purpose of this CL is to clean up RTCPSender::PrepareRTCP, but
it has quite a few ramifications. Notable changes:
* Removed the rtcpPacketTypeFlags bit vector and don't assume
RTCPPacketType values have a single unique bit set. This will allow
making this an enum class once rtcp_receiver has been overhauled.
* Flags are now stored in a map that is a member of the class. This
meant we could remove some bool flags (eg send_remb_) which was
previously masked into rtcpPacketTypeFlags and then masked out again
when testing if a remb packet should be sent.
* Make all build methods, eg. BuildREMB(), have the same signature.
An RtcpContext struct was introduced for this purpose. This allowed
the use of a map from RTCPPacketType to method pointer. Instead of
18 consecutive if-statements, there is now a single loop.
The context class also allowed some simplifications in the build
methods themselves.
* A few minor simplifications and cleanups.
The next step is to gradually replace the builder methods with the
builders from the new RtcpPacket classes.
BUG=2450
R=asapersson@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/48329004
Cr-Commit-Position: refs/heads/master@{#9166}
Removes FixedSizeLockFreeQueue which isn't used anymore. This enabled
moving rtc::AtomicOps to webrtc/base/atomicops.h where they should be.
BUG=4330
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/51789004
Cr-Commit-Position: refs/heads/master@{#9120}
It is just a pass through to webrtc/video_frame.h. Updated the callers
to include webrtc/video_frame.h instead and removed i420_video_frame.h.
This should fix pbos' TODO in i420_video_frame.h.
Tested on Linux with the following command lines:
$ rm -rf out/
$ ./webrtc/build/gyp_webrtc
$ ninja -C out/Debug
BUG=None
TEST=see above
R=magjed@webrtc.org, pbos@webrtc.org, tommi@webrtc.orgTBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46819004
Patch from Thiago Farina <tfarina@chromium.org>.
Cr-Commit-Position: refs/heads/master@{#8973}
Using the single stream bwe is really bad for the screenshare
test case in particular, but would probably help in other
cases as well so enabling it by default in CallTest setup.
BUG=
R=pbos@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43089004
Cr-Commit-Position: refs/heads/master@{#8971}
All these tests crashed before r8811. These tests should've been with
that change but r8811 was pushed in before to make bots green.
BUG=1788, 1667
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/48669004
Cr-Commit-Position: refs/heads/master@{#8881}
This means all channels within the same group will share the same pacing queue and scheduler. It also means padding will be computed and sent by a single pacer. To accomplish this I also introduce a PacketRouter which finds the RTP module which owns the packet to be paced out.
BUG=4323
R=mflodman@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45549004
Cr-Commit-Position: refs/heads/master@{#8864}
Instead of setting bitrates based on codec target settings (which may
have previously been capped by a codec max bitrate), fetch the last
bandwidth allocated for this channel. This fixes broken low start bitrates
due to QCIF being set as default codec in WebRtcVideoEngine2 which caps
the max bitrate to 200kbps.
BUG=1788
R=mflodman@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43789004
Cr-Commit-Position: refs/heads/master@{#8780}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8780 4adac7df-926f-26a2-2b94-8c16560cd09d
Original cl description:
This removes the none const pointer entry and SwapFrame.
Since frames delivered using VideoSendStream no longer use the external capture module, VideoSendStream will not get an incoming framerate callback. VideoSendStream now uses a rtc::RateTracker.
Also, the video engine must ensure that time stamps are always increasing.
With this, time stamps (ntp, render_time and rtp timestamps ) are checked and set in ViECapturer::OnIncomingCapturedFrame
This cl was previously reverted in https://webrtc-codereview.appspot.com/46549004/.
Patchset 1 contains the original patch after rebase.
Patshet 2 fix webrtc_perf_tests reported in chromium:465306
Note that chromium:465287 is being fixed in https://webrtc-codereview.appspot.com/43829004/
BUG=1128
R=magjed@webrtc.org, mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47629004
Cr-Commit-Position: refs/heads/master@{#8776}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8776 4adac7df-926f-26a2-2b94-8c16560cd09d
Remove the need for scoped_ptr<I420VideoFrame> in VieCapturer.
This adds the method I420VideoFrame::Reset and replace the use of scoped_ptr in ViECapturer.
Also, a unittest is added to check that ViECapturer does not retain a frame after it has been delivered.
BUG=1128
R=mflodman@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43669004
Cr-Commit-Position: refs/heads/master@{#8678}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8678 4adac7df-926f-26a2-2b94-8c16560cd09d
This removes the none const pointer entry and SwapFrame.
Since frames delivered using VideoSendStream no longer use the external capture module, VideoSendStream will not get an incoming framerate callback. VideoSendStream now uses a rtc::RateTracker.
Also, the video engine must ensure that time stamps are always increasing.
With this, time stamps (ntp, render_time and rtp timestamps ) are checked and set in ViECapturer::OnIncomingCapturedFrame
BUG=1128
R=magjed@webrtc.org, mflodman@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46429004
Cr-Commit-Position: refs/heads/master@{#8633}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8633 4adac7df-926f-26a2-2b94-8c16560cd09d
TextureVideoFrame is currently an empty shell that only provides a convenience constructor of I420VideoFrame with a texture buffer. This CL moves that constructor, and all unittests, of TextureVideoFrame into the base class. Then it's possible to completely remove TextureVideoFrame and all its files. Also, there is no point in having I420VideoFrame virtual anymore.
R=pbos@webrtc.org, perkj@webrtc.org, stefan@webrtc.org
TBR=mflodman
Review URL: https://webrtc-codereview.appspot.com/40229004
Cr-Commit-Position: refs/heads/master@{#8629}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8629 4adac7df-926f-26a2-2b94-8c16560cd09d
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
These parameters are set by the x-google-*-bitrate SDP parameters. This
is implemented on a Call level instead of per-stream like the currently
underlying VideoEngine implementation to allow this refactoring to not
reconfigure the VideoCodec at all but rather adjust bandwidth-estimator
parameters.
Also implements SetMaxSendBandwidth in WebRtcVideoEngine2 as it's a SDP
parameter and allowing it to be dynamically readjusted in Call.
R=mflodman@webrtc.org, stefan@webrtc.org
BUG=1788
Review URL: https://webrtc-codereview.appspot.com/26199004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7746 4adac7df-926f-26a2-2b94-8c16560cd09d
