Now vp9 screenshare would enable new layers as soon as requested and will
force all spatial layers present on the next frame, even if they should be
dropped because of frame-rate limiting.
This might cause frame-rate liming to be exceeded if layer is toggling on
and off very often, but this situation is bad itself. E.g. in realtime video
it will cause too many key-frames.
Now SvcRateAllocator and VP9EncoderImpl are aware that there may be some skipped
layers before the first enabled. Key-frames and ss_info triggering logic is also
updated.
Bug: webrtc:10977
Change-Id: Ie2555210c0368a1d3c51ddf6670d0052e6d679de
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153483
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29296}
This also means that the NetworkEstimate::bandwidth can be deprecated
as it's currently just a copy of the target_rate.
Bug: webrtc:10981
Change-Id: I1bc57b98480bd77ce052736b19d630c775428546
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153669
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29288}
Suppression filter is extended to support the synthesis
of multiple channels. This CL is also a major clean-up of ApplyGain.
The CL has been tested for bit-exactness for single channel output.
Bug: webrtc:10913
Change-Id: I1319f127981552e17dec66701a248d34dcf0e563
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/154341
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29284}
Passing an empty arg is working at the moment but it is not
guaranteed to continue to work in the future.
This CL has been generated with:
git grep -l "INSTANTIATE_TEST_SUITE_P(," | xargs sed -i \
"s/INSTANTIATE_TEST_SUITE_P(,/INSTANTIATE_TEST_SUITE_P(All,/g"
Bug: None
Change-Id: Icd2fb9d9d29aed5d692a234124bd990d0f097db4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153890
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29282}
Only the ISAC codec had an non-trivial implementation, for its unused
adaptive mode. This cl deletes that implementation, and the call
from NetEq, and the interface method.
Bug: webrtc:10098
Change-Id: Iaf7667e0ae867fc9d64286dff4c01a8ce0b6e2a4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153882
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29279}
Echo remover processes all microphone signals. Suppression gains are
computed separately for each capture signal. The minimum gains determine
the final suppression gains applied.
Only the first channel is synthesized. A follow-up CL will add the
synthesis of the remaining channels.
Bug: webrtc:10913
Change-Id: Ife7e74c9a9c6c208fca3992e3cfa840b6b7afcfa
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153526
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29269}
This appears unused. If deleted, other code related to isac bandwidth
estimation becomes unused and may be deleted in followup cls.
Bug: webrtc:10098
Change-Id: Ifeac2e90de895b12c337ea28cc33704350b9abf4
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153667
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29252}
Currently, APM fakes multichannel in two ways:
- With injected AECs, capture processing is only performed on the left
channel. The result is copied into the other channels.
- With multichannel render audio, all channels are mixed into one
before analysing.
This CL adds a flag to disable these behaviors, ensuring proper
multichannel processing happens throughout the APM pipeline.
Adds killswitches to separately disable render / capture multichannel.
Additionally - AEC3 currently crashes when running with multichannel.
This CL adds the missing pieces to at least have it run without
triggering any DCHECKS, including making the high pass filter properly
handle multichannel.
Bug: webrtc:10913, webrtc:10907
Change-Id: I38795bf8f312b959fcc816a056fba2c68d4e424d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152483
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29248}
This CL allows the user to have more refined control over what band
splitting-scheme is used inside the audio processing module.
Bug: webrtc:6181
Change-Id: I236c3b1f96ab80cc4ffb8c39c045c034764567a1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152480
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29189}
Otherwise it's inconvenient to run the test interactively, since
it leaves the interactive console window topmost preventing any other
window visibility even when the console window is deactivated.
Bug: webrtc:7950
Change-Id: I80a19509f1518550fe93b26feea9e8964b0e405d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150943
Reviewed-by: Jamie Walch <jamiewalch@chromium.org>
Commit-Queue: Kimmo Kinnunen FI <kkinnunen@nvidia.com>
Cr-Commit-Position: refs/heads/master@{#29181}
In this CL:
- Render signal analyzer considers a frequency bin a narrow band
(peak) if any channel exhibits narrowband (-peak) behavior.
- The unit tests have to fill frames with noise because small
inaccuracies in the FFT spectrum lead to consistent "narrow bands"
despite spectrum being essentially flat.
Bug: webrtc:10913
Change-Id: I8fa181412c0ee1beeacfda37ffef18251d5f0cd7
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151912
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29176}
This method used to be wired down to VCMReceiver and to
VCMJitterBuffer::Stop, but has become a nop. Also delete some
obsoleted comments.
Bug: webrtc:7408
Change-Id: I4c1e67272b1ffda786cc0ff358fa38e594aff304
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152620
Reviewed-by: Philip Eliasson <philipel@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29167}
In DelayBasedBwe, in experiment WebRTC-Bwe-AlrLimitedBackoff, back off relative the BWE only after the first detected overuse. The first time overuse is detected, back down to the acked bitrate.
The idea is to faster drop BWE in the beginning of the call when the initial BWE guess may be too high. Withouth this, it may take a too long time to initially back down.
BUG=webrtc:10542
Change-Id: I2a11457d2391ad25658e7c13d9cae02a38973ecb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152541
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Commit-Queue: Per Kjellander <perkj@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29163}
Both the tests and the code under test are very old, unstaffed and not
a part of webRTC stack.
Here sanitizers make the tests hang, without providing useful report.
So we are just disabling them, without intention to re-enable them.
Bug: webrtc:10951
Change-Id: I40e97208606ba3f0eb5b19d404f7d038e6cc2bdf
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152487
Commit-Queue: Yves Gerey <yvesg@google.com>
Reviewed-by: Henrik Andreassson <henrika@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29157}
This mode was added by libvpx team specificaly for this usecase: if a
layer is dropped, all lower layers have to be dropped also.
This ensures that higher layers always have higher framerate than the
lower layers and stream is RTP compatible.
This CL also renames full_superframe_drop_ to !layer_buffering, as it
closer reflects the purpose of that flag (in screenshare mode, no
buffering is needed, because the highest layer is always present in the
superframe, yet, it's not a full-superframe dropping mode).
Bug: webrtc:10257
Change-Id: I2589bfd2b9b63de0e410f277a716276234993843
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151764
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29155}
This CL adds a field trial parameter WebRTC-SlowDownDecoder that is
used to simulate a slow decoder. The parameter specifies how many
extra ms it takes to decode each video frame. This must only be used
in manual testing.
Bug: None
Change-Id: Iad4079100d67b95c224277aaeaf572e38068717f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151911
Commit-Queue: Johannes Kron <kron@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29153}
This is a reland of 9e380fd484db09c37323b90a19c5ce7965927975
Patchset 1 is the original CL. The follow-ups adds fix for a test failure
and test for that change.
Original change's description:
> Improve performance of RtpPacketHistory
>
> The data structures in RtpPacketHistory were chosen based on assumption
> of few packets with possible sparse segments due to missing acking.
> In practice high bitrate usages with full histories seem to be more of
> a problem.
> Due to that, change storage from an std::map to an std::deque and live
> with potential segments of nullptr. Also limit size of padding prio
> set so that doesn't become a bottleneck.
>
> Bug: webrtc:8975
> Change-Id: I3b6314fb3255937d25362ff2cd906efb7b1397f7
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/145901
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29117}
Bug: webrtc:8975
Change-Id: I5038e5ad2eb79ce75710d2d8b0b3ac01dd41c013
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152282
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29152}
The NetworkStateEstimator is updated on every incoming RTP packet if available.
A rtcp::RemoteEstimate packet is sent every time a rtcp::TransportFeedback packet is sent.
BUG=webrtc:10742
Change-Id: I4cd8e9d85d35faf76aeefd2e26c2a9fe1a62ca3b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152161
Commit-Queue: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29143}
