This simplifies the code and removes the need for a lot of bookkeeping
variables.
Bug: webrtc:9232
Change-Id: I0c9a4b0741ed5353caa22ba5acdcb166357441f2
Reviewed-on: https://webrtc-review.googlesource.com/74240
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23149}
This CL softens the effect of the AEC3 transparent mode to also handle
headsets that leak low-level echoes in a nonlinear way.
This is handled by reintroducing the limit in the echo path gain for the
nonlinear mode. Due to recent improvements in echo suppressor behavior
this is now possible to do with a limited impact on the near-end speech.
Bug: webrtc:9246,chromium:840347
Change-Id: I0ca5157160d1884ba93b962323b56016756986d3
Reviewed-on: https://webrtc-review.googlesource.com/74703
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23145}
Adding a build target for the bi-qaud filter to make it available for
the RNN VAD of AGC2. Also adding a unit test to test the computation
both in-place and not in-place while comparing the produced output to
that of scipy.signal.
Bug: webrtc:9076
Change-Id: I16176a477ee4b81bb1e090c4906c3a9948ad2772
Reviewed-on: https://webrtc-review.googlesource.com/74220
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23141}
Fixes a confusion of time units (milliseconds vs blocks) of externally
reported audio delay. This fix reduces the risk of echo in the beginning
of a call.
Bug: webrtc:9241,chromium:839860
Change-Id: I534cc15d6b215a5881ae46759f573a56871170a3
Reviewed-on: https://webrtc-review.googlesource.com/74589
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23128}
The code changes in this CL configure VP9 SVC to drop a superframe when
the spatial base layer is dropped and to not drop upper spatial layers
when the spatial base layer is not dropped. The changes are effective in
non-flexible mode when codec_.mode == kRealtimeVideo and
number of spatial layers > 1.
Bug: none
Change-Id: I27481b78f733cfc6c007d1ad9f45d69263853149
Reviewed-on: https://webrtc-review.googlesource.com/74261
Commit-Queue: Michael Horowitz <mhoro@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23127}
This removes places where the units types are implicitly left
uninitialized in network_types.h and adds rtc::Optional where needed.
Also removing the change indicator in the NetworkEstimate struct as it
is not used in practice.
Bug: webrtc:9155
Change-Id: I7e30e338effba96bd466ae91e380e6a8e90f66e1
Reviewed-on: https://webrtc-review.googlesource.com/73369
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Björn Terelius <terelius@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23126}
This CL creates a test fixture for the videoprocessor integration tests
and exposes it as part of the public API. It also rewrites the current
versions of the tests to build on this new paradigm. The motivation for
this is to easily allow projects that build on top of webrtc to add
integration-level tests for their own custom codec implementations in a
way that does not link them too tightly to the internal implementations
of said tests.
Bug: None
Change-Id: I7cf9f29322a6934b3cfc32da02ea7dfa5858c2b2
Reviewed-on: https://webrtc-review.googlesource.com/72481
Commit-Queue: Kári Helgason <kthelgason@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23118}
This CL contains changes to the echo suppressor that improves the
transparency of AEC3.
- The comfort noise level is used as masker and the masking threshold is
increased.
- Suppression gains are allowed to increase more rapidly.
- Suppression gains decrease slower in the lower frequencies after strong
nearend.
Change-Id: I7adf31ed90b0e007072191f40439f27c3b0bccf2
Bug: webrtc:9230,chromium:839379
Reviewed-on: https://webrtc-review.googlesource.com/73680
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23115}
The audio processing code is using parts of the iSAC codec to do voice
activity detection (VAD), but it's undesirable for it to pull in the
entire iSAC codec as a dependency. So this CL factors out the parts of
iSAC that's needed for VAD to a separate build target.
Bug: webrtc:8396
Change-Id: I884e25d8fd0bc815fca664352b0573b4b173880e
Reviewed-on: https://webrtc-review.googlesource.com/69640
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23110}
Request key frame when upper spatial layer is enabled dynamically
and inter-layer prediction is disabled or limited to key pictures.
This is needed to force encoder to produce RTP compatible bitstream
where temporal prediction is limited to the same spatial layer.
Bug: webrtc:9217
Change-Id: I4fc1e3f067689ba7b5c6bd1f5af922a0637f03d7
Reviewed-on: https://webrtc-review.googlesource.com/73580
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23102}
RNN implementation for the AGC2 VAD that includes a fully connected
layer and a gated recurrent unit layer.
Bug: webrtc:9076
Change-Id: Ibb8b0b4e9213f09eb9dbe118bbdc94d7e8e4f91b
Reviewed-on: https://webrtc-review.googlesource.com/72060
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Ivo Creusen <ivoc@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23101}
Fill drops with last decoded frame to make them look like freeze at
playback and to keep decoded spatial layers in sync.
Bug: none
Change-Id: I65f7c21100985c22932a1edd441b6c724833c11e
Reviewed-on: https://webrtc-review.googlesource.com/73685
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23076}
If frame of current layer was dropped, pass base frame to decoder if
non_ref_for_inter_layer_pred is set to true.
Bug: none
Change-Id: If7bf5220b74f424106edf74867c9afa8cc2b1ec5
Reviewed-on: https://webrtc-review.googlesource.com/73440
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23074}
Cleanup based on review of move CL. Using separate CL to keep the
move clean.
Bug: webrtc:9155
Change-Id: Ie0b15c6d3efcd86e2fa5761f014d0daf72ccfa06
Reviewed-on: https://webrtc-review.googlesource.com/73367
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23068}
Functions to estimate pitch period and gain.
Bug: webrtc:9076
Change-Id: Icfe9430dcae11bdb96165c5bfe6e2b1d3bf848ab
Reviewed-on: https://webrtc-review.googlesource.com/70382
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23066}
This CL removes the updating of the buffered data used to to pad the
64 sample blocks to 128 samples FFTs. As that padding was used
incorrectly in one place this resolves an important issue.
Bug: webrtc:9159,chromium:833801,webrtc:9206
Change-Id: Ie6830878ebec6130b61d4e7e3169357f2e253073
Reviewed-on: https://webrtc-review.googlesource.com/73240
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23059}
This CL changes the way the suppressor gain is computed in AEC3 in that
the FFTs used are padded with data and windowed with a Hanning-style
window.
This gives better FFT accuracy, an behavior matching the suppressor
gain application, and also results in one less FFT operation.
Bug: webrtc:9204,chromium:837563
Change-Id: I612676c389cb76a3130966a9b596ff3f44d21863
Reviewed-on: https://webrtc-review.googlesource.com/73141
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23057}
The new API stores events gathered by event type. For example, it is
possible to ask for a list of all incoming RTCP messages or all audio
playout events.
The new API is experimental and may change over next few weeks. Once
it has stabilized and all unit tests and existing tools have been
ported to the new API, the old one will be removed.
This CL also updates the event_log_visualizer tool to use the new
parser API. This is not a funcional change except for:
- Incoming and outgoing audio level are now drawn in two separate plots.
- Incoming and outgoing timstamps are now drawn in two separate plots.
- RTCP count is no longer split into Video and Audio. It also counts
all RTCP packets rather than only specific message types.
- Slight timing difference in sendside BWE simulation due to only
iterating over transport feedbacks and not over all RTCP packets.
This timing changes are not visible in the plots.
Media type for RTCP messages might not be identified correctly by
rtc_event_log2text anymore. On the other hand, assigning a specific
media type to an RTCP packet was a bit hacky to begin with.
Bug: webrtc:8111
Change-Id: Ib244338c86a2c1a010c668a7aba440482023b512
Reviewed-on: https://webrtc-review.googlesource.com/73140
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Björn Terelius <terelius@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23056}
If the adaptive gain is too low, we raise it slowly and only during
speech.
The CL gives better behavior at the start of a call. If the gain is too
high, the fixed-digital limits it. The gain is also quickly reduced by
the AdaptiveGainApplier.
Bug: webrtc:7494
Change-Id: I683f1e3e463cddec2d91f6c7f15c73e744430034
Reviewed-on: https://webrtc-review.googlesource.com/71484
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23053}
This allows to control inter-layer prediction at encoding VP9 SVC.
There are three options:
1. Disabled.
2. Enabled for all pictures.
3. Enabled for key pictures, disabled for others.
Inter-layer prediction is enabled for all pictures by default.
Bug: none
Change-Id: I49fe43d8744c92bec349d815100ba158519f0664
Reviewed-on: https://webrtc-review.googlesource.com/71500
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23049}
The MBP having both discrete and integrated graphic cards will do
automate graphics switching by default. When it switches from discrete to
integrated one, the current display ID of the built-in display will
change and this will cause screen capture stops.
So make screen capture of built-in display continuing even if its display
ID is changed.
Bug: chromium:836979
Change-Id: If4f2d04d99a2690ccd6f894d94e6f8ff58ba2ec8
Reviewed-on: https://webrtc-review.googlesource.com/72603
Reviewed-by: Jamie Walch <jamiewalch@chromium.org>
Commit-Queue: Brave Yao <braveyao@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23048}
This reverts commit b04e5cae08b8a7bc27041c1606547f807aaa2fc1.
Reason for revert: The reason for the revert is that some scenarios were detected where this caused the delay estimation to occur too slowly.
Original change's description:
> Making the delay estimator more robust to noisy nearends and low echoes
>
> This CL reduces the delay estimator step size to make it react better in
> scenarios where the environment is noisy, or the echo level is fairly
> low.
>
> Bug: webrtc:9177,chromium:835281
> Change-Id: I482d898c91eddc497e1284ee500d26df21a0574a
> Reviewed-on: https://webrtc-review.googlesource.com/71486
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#22990}
TBR=gustaf@webrtc.org,peah@webrtc.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webrtc:9177, chromium:835281
Change-Id: I33e09ebfed8ad8330419e554f482c956608befce
Reviewed-on: https://webrtc-review.googlesource.com/72843
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Oleh Prypin <oprypin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23042}
For consistency with the VP9 RTP spec which uses term "picture" for set
of frames which belong to the same time instance.
Bug: none
Change-Id: I30e92d5debb008feb58f770b63fe10c2e0029267
Reviewed-on: https://webrtc-review.googlesource.com/72180
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23040}
This CL makes sure that the coherence-based gains are affected by the
upper gain limit during call start-up and after resets.
Bug: webrtc:9159,chromium:833801
Change-Id: I93fdd173b6e11ea861d0e01e12c048ec0a91db70
Reviewed-on: https://webrtc-review.googlesource.com/72841
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23039}
It's safe to ignore this overflow since it only affects audio data,
not indices or anything like that.
Bug: chromium:835637
Change-Id: I60162e4627b08d5e3ba3a21fdae8087f098c7e46
Reviewed-on: https://webrtc-review.googlesource.com/72701
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Commit-Queue: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23030}
This reverts commit 9e336ec0b8a77c3461d13677cff3563c11c88daa.
Reason for revert: Code can accidentally include the deprecated parser but link with the new one, or vice versa. Reverting to fix naming.
Original change's description:
> Create new API for RtcEventLogParser.
>
> The new API stores events gathered by event type. For example, it is
> possible to ask fo a list of all incoming RTCP messages or all audio
> playout events.
>
> The new API is experimental and may change over next few weeks. Once
> it has stabilized and all unit tests and existing tools have been
> ported to the new API, the old one will be removed.
>
> This CL also updates the event_log_visualizer tool to use the new
> parser API. This is not a funcional change except for:
> - Incoming and outgoing audio level are now drawn in two separate plots.
> - Incoming and outgoing timstamps are now drawn in two separate plots.
> - RTCP count is no longer split into Video and Audio. It also counts
> all RTCP packets rather than only specific message types.
> - Slight timing difference in sendside BWE simulation due to only
> iterating over transport feedbacks and not over all RTCP packets.
> This timing changes are not visible in the plots.
>
>
> Media type for RTCP messages might not be identified correctly by
> rtc_event_log2text anymore. On the other hand, assigning a specific
> media type to an RTCP packet was a bit hacky to begin with.
>
> Bug: webrtc:8111
> Change-Id: I8e7168302beb69b2e163a097a2a142b86dd4a26b
> Reviewed-on: https://webrtc-review.googlesource.com/60865
> Reviewed-by: Minyue Li <minyue@webrtc.org>
> Reviewed-by: Sebastian Jansson <srte@webrtc.org>
> Commit-Queue: Björn Terelius <terelius@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#23015}
TBR=terelius@webrtc.org,srte@webrtc.org,minyue@webrtc.org
Change-Id: Ib4bbcf0563423675a3cc1dce59ebf665e0c5dae9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:8111
Reviewed-on: https://webrtc-review.googlesource.com/72500
Reviewed-by: Björn Terelius <terelius@webrtc.org>
Commit-Queue: Björn Terelius <terelius@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23026}
This deletes the resilienceOn flag in VideoCodecVP8 and VideoCodecVP9.
Instead, the implementations of VP8 and VP9 set resilience mode
internally, based on the configuration of temporal and spatial layers.
The nack_enabled argument to VideoCodecInitializer::SetupCodec becomes
unused with this cl. In a followup, it will be deleted, together with
the corresponding argument to VideoStreamEncoder methods.
An applications which really wants to configure resilience differently
can do that by injecting an EncoderFactory with encoders behaving
as desired.
Bug: webrtc:8830
Change-Id: I9990faf07d3e95c0fb4a56fcc9a56c2005b4a6fa
Reviewed-on: https://webrtc-review.googlesource.com/71380
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23025}
