only whenever a RTCP receiver block is received.
Additionally:
Add condition to only start rampup after a receiver block is received. This was same as old behaviour but now an explicit check is needed to verify process does not ramps up before the first block.
Fix logic around capping max bitrate increase at 8% per second. Before it was only increasing once every 1 second and each increase would be as high as 8%. If receiver blocks had a different interval before it would lose an update or waste an update slot and not ramp up as much as a 8% (e.g. if RTCP received < 1 second).
Did not touch decrease logic, however since it can be triggered more often it
may decrease much faster and closer to the original written cap of once every
300ms + rtt.
Note:
rampup_tests.cc don't seem to be affected by this since there is no packet loss or REMB that go higher than expected cap.
bitrate_controller_unittests.cc are don't really simulate a clock and the process thread, but trigger update by inserting an rtcp block.
BUG=3065
R=stefan@webrtc.org, mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10529004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5775 4adac7df-926f-26a2-2b94-8c16560cd09d
Camera start is a blocking operation so never a good idea to do on a main
thread, but worse than that is that the guts of WebView appear to be
interacting with capture start in a bad way causing startup to pause for 10s
while a timeout expires. This change eliminates that 10s delay.
R=noahric@google.com
Review URL: https://webrtc-codereview.appspot.com/10449004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5772 4adac7df-926f-26a2-2b94-8c16560cd09d
These changes are currently not used in webrtc/ but helps in using the delay estimator.
* The last_delay_quality() is updated with respect to robust_validation and changed to return float.
* Tests are updated wtih respect to above.
* Adds the possibility to make a soft reset based on external circumstances like a known delay shift has been made.
* The soft reset change the lookahead dynamically. An API to ask for current lookahead has been added as well.
BUG=N/A
TESTED=trybots, modules_unittest
R=aluebs@webrtc.org, andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10409004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5761 4adac7df-926f-26a2-2b94-8c16560cd09d
- Move condition of 0 bps as max meaning 1gbps from SendSideBandwidthEstimation to BitrateController.
- Remove condition on bitrate=0 meaning bandwidth estimation off as that could only happen when no observers existed
and in which case the estimation would be ignored.
- Add MaybeTriggerOnNetworkChanged which only runs rate allocation if any of the dependent variables has changed
thus allowing to remove many of the bool returns that try to indicate if the estimation has changed which would not
be aware if the observers have changed.
- SendSideBandwidthEstimation now has a UpdateBitrate and has clear code paths to which calls update bitrate.
- Changes in enforce_min_bitrate so the 10kbps min is set from the BitrateController and not from the outside this keep valid as observers are changed.
R=henrik.lundin@webrtc.org, stefan@webrtc.org
BUG=3065
Review URL: https://webrtc-codereview.appspot.com/10189004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5752 4adac7df-926f-26a2-2b94-8c16560cd09d
GetWindowRect includes the window frames for maximized window even they are off screen, causing content outside the window being captured falsely. The fix is to remove the left/right/bottom window frame from the captured rect. Mouse capturing is adjusted accordingly as well.
BUG=3076
R=sergeyu@chromium.org
Review URL: https://webrtc-codereview.appspot.com/10149004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5732 4adac7df-926f-26a2-2b94-8c16560cd09d
- An RTX packet with no payload should be dropped prior to parsing RTX header since it doesn't have an RTX header. This can for example happen when sending padding-only packets over the RTX stream.
- The retransmit code path when the pacer is disabled doesn't properly update the abs-send-time and ts-offset header extensions.
TEST=trybots
R=mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9189004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5728 4adac7df-926f-26a2-2b94-8c16560cd09d
New interface uses two bitrates (max/min). The pace multiplier is also
removed from the interface and instead utilized outside. Min bitrate
will be filled with padding if there's not enough media to transmit.
Also fixes a bug in minimum transmission bitrate that made it ignore
REMBs. A regression test has been added to catch it.
BUG=3014
R=mflodman@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10059004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5723 4adac7df-926f-26a2-2b94-8c16560cd09d
Wrote a new NetEq unit test to test a network freeze during comfort
noise playout. The network freezes and resumes during the silence
period, and then resumes speech. It was verified that the delay
increased due to the freeze, and this CL contains a fix for that
problem.
BUG=2995
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9849004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5701 4adac7df-926f-26a2-2b94-8c16560cd09d
In practice, this will have only marginal effect. The length_limit
was increased from 6.7 ms to 10 ms. This is compared with the
input_length, which is equal to the decoded frame size. Thus,
this change will only affect encoded frame sizes in this range
(including 10 ms).
BUG=2696
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9969004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5700 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL implements a unit test to cover an case where comfort noise
packets should be discarded. The situation arises when NetEq gets a
duplicate comfort noise packet. Without this check, the duplicate would
be decoded, and a the timing would shift.
As it turned out, the corner-case funcionality was not completely
accurate in NetEq4. This is because decision_logic_::cng_state_ is set
after the corner-case check. In the old NetEq3, the corresponding state
was changed before the check. This is now fixed.
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9639005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5685 4adac7df-926f-26a2-2b94-8c16560cd09d
Adding option to use mock or real objects instead of mocks.
This will help future testing efforts, where each test case can
select whether a mock or a real object should be used.
Adding new test InsertPacketsUntilBufferIsFull.
Removing a few uniteresting mock call warning.
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9839004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5684 4adac7df-926f-26a2-2b94-8c16560cd09d
- Add an Initialize() overload to allow specification of format
parameters. This is mainly useful for testing, but could be used in
the cases where a consumer knows the format before the streams arrive.
- Add a reverse_sample_rate_hz_ parameter to prepare for mismatched
capture and render rates. There is no functional change as it is
currently constrained to match the capture rate.
- Fix a bug in the float dump: we need to use add_ rather than set_.
- Add a debug dump test for both int and float interfaces.
- Enable unpacking of float dumps.
- Enable audioproc to read float dumps.
- Move more shared functionality to test_utils.h, and generally tidy up
a bit by consolidating repeated code.
BUG=2894
TESTED=Verified that the output produced by the float debug dump test is
correct. Processed the resulting debug dump file with audioproc and
ensured that we get identical output. (This is crucial, as we need to
be able to exactly reproduce online results offline.)
R=aluebs@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9489004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5676 4adac7df-926f-26a2-2b94-8c16560cd09d
std::memcpy -> memcpy for instance. This change was motivated by a
compile report complaining that std::rand() was used instead of rand(),
probably with a stdlib.h include instead of cstdlib. Use of C functions
without the std:: prefix is a lot more common, so removing std:: to
address this.
BUG=
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9549004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5658 4adac7df-926f-26a2-2b94-8c16560cd09d
As a by-product, a generic tool for testing and comparing the complexity of codecs is added, and new audio files are added to the resources.
Three complexity tests are included
1. Default Opus complexity
2. Opus complexity knob
3. Default iSAC complexity (to compare with Opus)
The complexity tests are only meant for development reasons
and not to be run at bots.
The .isolate file is only needed for the APK packaging and test execution on Android.
TEST=passes all trybots
BUG=
R=kjellander@webrtc.org, tina.legrand@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/8969004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5655 4adac7df-926f-26a2-2b94-8c16560cd09d
