From now on it is expected that code linking system_wrappers.gyp:system_wrappers
provides an implementation for field_trial API or links with the default one in
system_wrappers.gyp:field_trial_default.
Note: Since there is no use of webrtc::field_trial API inside webrtc this CL on
itself does not forces the clients to actually define it. It however lays the
API and updates the gyp rules to link with so that it is ready to use.
Tested: Introduced a use of field trial in system wrappers and make sure all
bots were building successfully.
BUG=crbug/367114
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/14489004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6147 4adac7df-926f-26a2-2b94-8c16560cd09d
This change includes max_packets_in_buffer and max_delay_ms in the
NetEq config struct. The packet buffer is also no longer limited in
terms of payload sizes (bytes), only number of packets.
The old constants governing the packet buffer limits are deleted.
BUG=3083
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/14389004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5989 4adac7df-926f-26a2-2b94-8c16560cd09d
The value of AudioFrame::energy_ must be set to -1 in order to have the
energy calculated later on in the AudioConferenceMixer module. This was
not the case in ACM2, where the value was set to 0 instead. This
resulted in bad audio for multi-party calls (5 or more participants).
Implemented a unit test to verify ACM output frame.
BUG=3255
TBR=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12369005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5969 4adac7df-926f-26a2-2b94-8c16560cd09d
Registeration of iSAC into NetEq is through injecting and external AudioDecoder. This is because iSAC encoder and decoder need to share instances for bandwidth estimator to work. When external decoder is registerred, the sampling rate of the decoder had to be specified. iSAC/48000 decoder has a native sampling rate of 32000 Hz, but it has been registered as 48000 Hz decoder.
This CL fixing this issue by letting NetEq to obtain sampling rate of an external coder according to its existing database.
BUG=3143
TEST=voe_cmd_test,modules_unittest,try-bots
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12139004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5936 4adac7df-926f-26a2-2b94-8c16560cd09d
The design of VoeNetEqStatsTest in voice_engine_unittests depended on
being able to inject a factory for the audio coding module into
voice engine. This functionality is now likely going away, which would
make this test fail to compile. Further, the functionality under test
is mostly ACM functionality, wherefore it makes better sense to test it
at ACM level.
BUG=2996
R=henrika@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12029004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5912 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL brought to you by:
$ for d in $(for f in $(git ls-files '*gyp' '*gypi'); do dirname $f; done|sort|uniq|grep -v '^\.$'); do echo -e "\n# These are for the common case of adding or renaming files. If you're doing\n# structural changes, please get a review from a reviewer in this file.\nper-file *.gyp=*\nper-file *.gypi=*" >> $d/OWNERS; done
$ for d in $(for f in $(git ls-files '*gyp' '*gypi'); do dirname $f; done|sort|uniq|grep -v '^\.$'); do git add $d/OWNERS; done
(and then removed the talk/ impact)
R=niklas.enbom@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11969004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5903 4adac7df-926f-26a2-2b94-8c16560cd09d
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
std::memcpy -> memcpy for instance. This change was motivated by a
compile report complaining that std::rand() was used instead of rand(),
probably with a stdlib.h include instead of cstdlib. Use of C functions
without the std:: prefix is a lot more common, so removing std:: to
address this.
BUG=
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9549004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5658 4adac7df-926f-26a2-2b94-8c16560cd09d
Analogous to the recent libjingle change: http://cl/54929753-p10.
This supports scoped_ptr<T[]> and scoped_ptr<C, FreeDeleter> rather
than scoped_array and scoped_ptr_malloc respectively.
- Add Chromium's template-based COMPILE_ASSERT. We didn't have this
previously in order to support the macro in C. Instead, move the
existing macro to compile_assert_c.h.
- Additionally copy the move.h and template_util.h depedencies and add
the WARN_UNUSED_RESULT macro.
- Leave scoped_array and scoped_ptr_malloc for now, but mark as
deprecated.
- Remove scoped_ptr foo(NULL) use. The default constructor handles it.
- Remove the now redundant COMPILE_ASSERT from peerconnection_jni.cc.
- Add a CHECK_ARRAY_SIZE macro to rtp_format_vp8_unittest.cc to remove
some repeated code.
TESTED=trybots
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2449005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5015 4adac7df-926f-26a2-2b94-8c16560cd09d
If there is audio in a codec's audio buffer and sample-rate or number of channels change the audio buffer has to reset. Otherwise, the amount of audio in the buffer is misinterpreted any syncronization between 10ms audio blocks and their associated timestamps is lost.
For instance, assume changing from stereo to mono when there is 10ms stereo in the buffer. The "new" codec will interpret this as 20 ms audio, therefore, 2 blocks of 10 ms, but there is only one timestamp. This will results in ACMGenericCodec::in_timestamp_ix_write_ updated to a negative number after an encode is performed.
The drawback with this solution is that if packet-size of the codec is changed then audio buffer is reset wich is not necessary. We accept this as it is a rare case in practice that clients of ACM re-register send codecs to change packet-size.
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2151006
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4887 4adac7df-926f-26a2-2b94-8c16560cd09d
First patch set is the same as patch set 3 of http://review.webrtc.org/2237004/
-Make ACM1 to depend on ACM2.
-Remove APIs to set and get background noise mode. There is no VoE call to these
APIs.
-Remove APIs to set and get receive side VAD mode. There is no VoE call to these
APIs, and NetEq 4, doesn't support them.
-Remove callback for in-band DTMF detection. ACM doesn't support in-band DTMF
detection.
-Use acm_common_defs.h everywhere required.
-Complete ACM factory method.
-Update ACMCodecDatabase of ACM2. CNG full-band need to be define-guarded.
Remove dynamic payload-type assignment.
BUG=
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2249004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4785 4adac7df-926f-26a2-2b94-8c16560cd09d
-Make ACM1 to depend on ACM2.
-Remove APIs to set and get background noise mode. There is no VoE call to these APIs.
-Remove APIs to set and get receive side VAD mode. There is no VoE call to these APIs, and NetEq 4, doesn't support them.
-Remove callback for in-band DTMF detection. ACM doesn't support in-band DTMF detection.
-Use acm_common_defs.h everywhere required.
-Complete ACM factory method.
-Update ACMCodecDatabase of ACM2. CNG full-band need to be define-guarded. Remove dynamic payload-type assignment.
BUG=
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2237004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4772 4adac7df-926f-26a2-2b94-8c16560cd09d
