This test has been failing every now and then. This is likely due to the
random input that was used. With this change, the input is now read from
an audio file, making it identical on each run.
The encoding is moved to inside the main test loop, so that new data is
added with each packet. (Before this change, the same payload was added
over and over again; only the RTP header was updated.)
BUG=3715
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/19079004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6948 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL turns the background noise generation in NetEq off by default. The noise generation used to kick in during long-duration packet losses, when there was no point in extrapolating the latest audio any longer. However, this sometimes produces annoying noise in situations where silence would have been preferable.
With this change, a long packet-loss concealment will be faded out to zeros instead of a low noise.
Reference files are updated where needed.
BUG=3519
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20109004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6882 4adac7df-926f-26a2-2b94-8c16560cd09d
This change replaces the old NETEQTEST_RTPpacket and
NETEQTEST_DummyRTPpacket with the new test::Packet class. Note that the
Packet class automatically handles "dummy" packets (i.e., packets for
which only the header and a length field was stored to file)
automatically. There is no need to explicitly signal this to the
application any longer. The RTP input file is now handled as a
test::PacketSource object.
Also adding a new ConvertHeader method to the Packet class. This is
needed to extract the header information as an alternative data type.
Finally, some dead code was deleted from rtp_analyze.cc (unrelated to
the reset of this change).
BUG=2692
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/21139004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6862 4adac7df-926f-26a2-2b94-8c16560cd09d
This change prepares for switching default background noise (bgn) mode
from on to off. The actual switch will be done later.
In this change, the bgn mode is included as a setting in NetEq's config
struct. We're also removing the connection between playout modes and
bgn modes in ACM. In practice this means that bgn mode will change from
off to on for streaming mode, but since the playout modes are not used
it does not matter.
BUG=3519
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/21749004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6843 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL introduces a bit-exactness test for the receive-side of the
AudioCoding Module. The main part of the test is done in the helper
class AcmReceiveTest. The test is executed from the test fixture
AcmReceiverBitExactness.
The test inserts packets from a pre-encoded RTP file. The output is
summed up into a checksum, which is verified versus a reference at the
end of the test. Alternatively, if the flag --generate_output is given,
the output is written to a file for subjective verification.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/13769004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6549 4adac7df-926f-26a2-2b94-8c16560cd09d
Rolling to this new Chromium revision required us to introduce
a sanitizer_options similar to the one in Chromium's base
(see https://code.google.com/p/chromium/codesearch#chromium/src/base/base.gyp&l=977
and https://codereview.chromium.org/238123003) in order
to get the same defaults for ASan and LSan. Without it
compilation will break since LeakSanitizer (LSan) is enabled by
default in Clang r209387 that is pulled with this roll.
I setup so that we pull in the sanitizer_options.cc and
tsan_suppressions.cc files using DEPS, so we don't have to maintain
them separately for now. We can still use our own TSan suppressions.txt
file as we do today with no changes needed.
This roll also brings in http://crrev.com/276676 so we can enable
GN build for WebRTC.
Overview of changes in Chrome DEPS:
$ svn diff http://src.chromium.org/chrome/trunk/src/DEPS -r 272489:277350
which can be compared with the output of:
$ svn cat http://webrtc.googlecode.com/svn/trunk/DEPS | grep chromium_deps | sed 's/^ *//' | sort | uniq
in a WebRTC checkout, gives the following relevant changes:
* third_party/android_tools 6fc0e1:c6e658
* third_party/libjpeg_turbo 263594:272637
* third_party/libyuv 1000:1007
* third_party/nss 271760:277057
* tools/gyp 1921:1927
* tools/swarming_client ae8085:aea506
The following also shows that Clang is upgraded from r206824 to r209387:
$ svn diff http://src.chromium.org/chrome/trunk/src/tools/clang/scripts/update.sh -r 272489:277350
BUG=3441
TEST=Trybots are not passing since after the recipe switch, SVN-based try jobs doesn't seem to support auto-detecting that a sync is needed if there's a DEPS change.
R=andrew@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12729004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6516 4adac7df-926f-26a2-2b94-8c16560cd09d
The AudioSink interface is supposed to be used by tests that produce
audio output. Two implementation classes are also provided:
OutputAudioFile: Writes the audio to a pcm file.
AudioChecksum: Calculates the MD5 checksum of the audio.
These will both be used in future changes.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/17729004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6490 4adac7df-926f-26a2-2b94-8c16560cd09d
The NextPacket method should now return NULL when the end of the
source was reached. In the RtpFileSource, this means that when
the end of file is reached, NULL is returned. Also, when an RTCP
packet is encountered, the next packet will be read from file
immediately.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20699004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6479 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL brought to you by:
$ for d in $(for f in $(git ls-files '*gyp' '*gypi'); do dirname $f; done|sort|uniq|grep -v '^\.$'); do echo -e "\n# These are for the common case of adding or renaming files. If you're doing\n# structural changes, please get a review from a reviewer in this file.\nper-file *.gyp=*\nper-file *.gypi=*" >> $d/OWNERS; done
$ for d in $(for f in $(git ls-files '*gyp' '*gypi'); do dirname $f; done|sort|uniq|grep -v '^\.$'); do git add $d/OWNERS; done
(and then removed the talk/ impact)
R=niklas.enbom@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11969004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5903 4adac7df-926f-26a2-2b94-8c16560cd09d
The tool RTPanalyze (used to process an input RTP dump into a
text file of RTP header info) was present in both the neteq and
neteq4 folders. This change pulls in changes from the old to the new
and renames the source file and tool to rtp_analyze.
Removing special code for dummy-rtp files (it is supported without
special code), and making the RED payload type settable using flags.
Moving from test/ to tools/ folder.
BUG=2692
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/10789004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5832 4adac7df-926f-26a2-2b94-8c16560cd09d
The performance test is based on the neteq4_speed_test application. The
bulk of the test code is extracted into a test class, and included into
the neteq_unittest_tools target. The actual gtest that runs the
performance test is implemented in neteq_performance_unittest.cc, and
built as a part of webrtc_perf_tests.
The old stand-alone test application is now made dependent on the new
test class, to avoid code duplication.
BUG=2397
R=andrew@webrtc.org, kjellander@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/6749004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5362 4adac7df-926f-26a2-2b94-8c16560cd09d
Wrap-arounds in sequence numbers (and in timestamps) were not always
treated correctly. This is fixed by introducing two helper functions
for correct comparisons, and by casting to the right word size.
Also added a new member variable to AutomodeInst_t. The new member keeps
track of when the first packet has been registered in the automode code.
This was previously done implicitly (and not very good) using the fact
that the lastSeqNo and lastTimestamp members were initialized to zero.
Two new unit tests were added as part of this CL.
NetEqDecodingTest.SequenceNumberWrap was failing before the fixes were
made; now it is ok.
BUG=2654
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/4139004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5150 4adac7df-926f-26a2-2b94-8c16560cd09d
Recent changes in GYP seem to have broken our previous
"hack" for getting the GYP rule for .isolate files
imported from the Chromium build/isolate.gypi.
The best solution for now is to remove the hack
and check in a copy of Chromium's src/build/isolate.gypi
in WebRTC's build/ dir instead. A similar approach is
used for our build/protoc.gypi file.
TEST=On Linux, I successfully ran:
gclient runhooks
ninja -C out/Release
and verified a bunch of .isolated files were created in
out/Release (which didn't happen before this patch).
I also renamed the build/isolate.gypi from Chromium to
ensure that our own is used and not that one (in case any
paths would be incorrect).
I also ran build/gyp_chromium in a Chromium checkout
with WebRTC in third_party/webrtc having this patch applied
to ensure GYP processing was still working.
Finally, I verified that the same project generation and
compilation from a Chromium checkout worked the way we build
our Android native tests, using:
. build/android/envsetup.sh
GYP_DEFINES="$GYP_DEFINES include_tests=1 enable_tracing=1" gclient runhooks
ninja -C out/Release android_builder_webrtc
BUG=1916
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2338004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4907 4adac7df-926f-26a2-2b94-8c16560cd09d
The ACM tests needed re-writing, because all tests were not individual gtests, and the result was difficult to interpret.
While doing the re-write, I discovered a bug related to 48 kHz CNG. We can't have the 48 kHz CNG active at the moment. The bug is fixed in this CL.
I also needed to rewrite parts of the VAD/DTX implementation, so that the status of VAD and DTX (enabled or not) is propagated back from the function SetVAD().
BUG=issue2173
R=minyue@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1961004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4625 4adac7df-926f-26a2-2b94-8c16560cd09d
This is a re-land attempt of http://review.webrtc.org/1673004/
It now includes a build/isolate.gypi in WebRTC that includes the same
file as the one that would be included when WebRTC is used in a Chromium
checkout. It is needed since it is not possible to use variables in GYP's
includes sections.
Implemented according to the instructions at
http://www.chromium.org/developers/testing/isolated-testing
Workflow has been like this:
1. create _run GYP target
2. create a stripped down .isolate file
3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
4. runhooks
5. compile
6. test if the test would run (i.e. find it's dependencies) without
actually executing it:
tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
7. If failing, run the fix_test_cases.py script like this:
tools/swarm_client/googletest/fix_test_cases.py --isolated out/Release/testname.isolated
All tests that run on the bots for WebRTC has got _run target
and .isolate file created.
"Normal tests" that run fine on any machine:
* audio_decoder_unittests
* common_audio_unittests
* common_video_unittests
* metrics_unittests
* modules_tests
* modules_unittests
* neteq_unittests
* system_wrappers_unittests
* test_support_unittests
* tools_unittests
* video_engine_core_unittests
* voice_engine_unittests
Tests that requires bare-metal and audio/video devices:
* audio_device_tests
* video_capture_tests
I also added the isolate boilerplate code for the following
tests that are not yet pure gtest binaries (which means they
cannot run isolated yet):
* video_render_tests
* vie_auto_test
* voe_auto_test
TEST=running isolate.py as described above. WebRTC trybots passing. Created a Chromium checkout with third_party/webrtc ToT and this patch applied, passing the runhooks step.
BUG=1916
R=henrike@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2056004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4590 4adac7df-926f-26a2-2b94-8c16560cd09d
As this breaks the FYI bots in
http://build.chromium.org/p/chromium.webrtc.fyi/waterfall
due to different path to isolate.gypi (which cannot easily
be resolved due to limitations in GYP)
> Isolate GYP target and .isolate files for tests
>
> Implemented according to the instructions at
> http://www.chromium.org/developers/testing/isolated-testing
>
> Workflow has been like this:
> 1. create _run GYP target
> 2. create a stripped down .isolate file
> 3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
> 4. runhooks
> 5. compile
> 6. test if the test would run (i.e. find it's dependencies) without
> actually executing it:
> tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
> 7. If failing, run the fix_test_cases.py script like this:
> tools/swarm_client/fix_test_cases.py --isolated out/Release/testname.isolated
>
> All tests that run on the bots for WebRTC has got _run target
> and .isolate file created.
>
> "Normal tests" that run fine on any machine:
> * audio_decoder_unittests
> * common_audio_unittests
> * common_video_unittests
> * metrics_unittests
> * modules_integrationtests
> * modules_unittests
> * neteq_unittests
> * system_wrappers_unittests
> * test_support_unittests
> * tools_unittests
> * video_engine_core_unittests
> * voice_engine_unittests
>
> Tests that requires bare-metal and audio/video devices:
> * audio_device_integrationtests
> * video_capture_integrationtests
>
> I also added the isolate boilerplate code for the following
> tests that are not yet pure gtest binaries (which means they
> cannot run isolated yet):
> * video_render_integrationtests
> * vie_auto_test
> * voe_auto_test
>
> TEST=running isolate.py as described above.
> BUG=1916
> R=tommi@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/1673004TBR=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2040004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4548 4adac7df-926f-26a2-2b94-8c16560cd09d
Implemented according to the instructions at
http://www.chromium.org/developers/testing/isolated-testing
Workflow has been like this:
1. create _run GYP target
2. create a stripped down .isolate file
3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
4. runhooks
5. compile
6. test if the test would run (i.e. find it's dependencies) without
actually executing it:
tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
7. If failing, run the fix_test_cases.py script like this:
tools/swarm_client/fix_test_cases.py --isolated out/Release/testname.isolated
All tests that run on the bots for WebRTC has got _run target
and .isolate file created.
"Normal tests" that run fine on any machine:
* audio_decoder_unittests
* common_audio_unittests
* common_video_unittests
* metrics_unittests
* modules_integrationtests
* modules_unittests
* neteq_unittests
* system_wrappers_unittests
* test_support_unittests
* tools_unittests
* video_engine_core_unittests
* voice_engine_unittests
Tests that requires bare-metal and audio/video devices:
* audio_device_integrationtests
* video_capture_integrationtests
I also added the isolate boilerplate code for the following
tests that are not yet pure gtest binaries (which means they
cannot run isolated yet):
* video_render_integrationtests
* vie_auto_test
* voe_auto_test
TEST=running isolate.py as described above.
BUG=1916
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1673004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4547 4adac7df-926f-26a2-2b94-8c16560cd09d
