There are edge cases where the caching of encoder info will cause
issues. For instance if a sub-encoder fails en Encode call and falls
back to some other implementation, or if the fps targets shift due to
SetRates() triggering new layers to be enabled.
This CL forces a complete rebuild on every call to GetEncoderInfo().
It also adds new logging of when the info changes, as debugging issues
can be very time consuming if we can't tell that happened.
Bug: webrtc:11000
Change-Id: I7ec7962a589ccba0e188e60a11f851c9de874fab
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/160960
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29938}
This CL adds an optional second encoder factory to SimulcastEncoderAdapter,
that can be used to create software fallback adapter per simulcast layer.
It also adds logic to check if the encoder supports simulcast natively, if so
it only allocates a single instance and delegates the simulcast logic to that
encoder instead. This means we will be able to remove EncoderSimulcastProxy.
Bug: webrtc:11000
Change-Id: Ifd5f029cc281ee2cedf9d18efa5e7e460884d6ff
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155171
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29364}
The purpose of this interface is to allow VideoEncoder to override
the bandwidth allocation set by FecController in RtpVideoSender.
This CL defines the interface and sends it down to VideoSender.
Two upcoming CLs will:
1. Make LibvpxVp8Encoder pass it on to the (injectable)
FrameBufferController, where it might be put to good use.
2. Modify RtpVideoSender to respond to the message sent to it
via this API.
TBR=kwiberg@webrtc.org
Bug: webrtc:10769
Change-Id: I2ef82f0ddcde7fd078e32d8aabf6efe43e0f7f8a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/143962
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28416}
This is a reland of 11dfff0878c949f2e19d95a0ddc209cdad94b3b4
Now that I am sure that WebRTC code is not calling the obsolete
versions, I will just remove the NOT_REACHED and call the
new version from the old ones, so as not to trip up downstream
projects.
Original change's description:
> Inform VideoEncoder of negotiated capabilities
>
> After this CL lands, an announcement will be made to
> discuss-webrtc about the deprecation of one version
> of InitEncode().
>
> Bug: webrtc:10720
> Change-Id: Ib992af0272bbb16ae16ef7e69491f365702d179e
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/140884
> Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
> Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Commit-Queue: Elad Alon <eladalon@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28224}
TBR=sakal@webrtc.org,kwiberg@webrtc.org,sprang@webrtc.org
Bug: webrtc:10720
Change-Id: I46c69e45c190805c07f7e51acbe277d7eebd1600
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/141412
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28236}
This is a reland of 7ac0d5f348f0b956089c4ed65c46e65bac125508
Original change's description:
> Replace usage of old SetRates/SetRateAllocation methods
>
> This rather large CL replaces all relevant usage of the old
> VideoEncoder::SetRates()/SetRateAllocation() methods in WebRTC.
> API is unchanged to allow downstream projects to update without
> breakage.
>
> Bug: webrtc:10481
> Change-Id: Iab8f292ce6be6c3f5056a239d26361962b14bb38
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131949
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Per Kjellander <perkj@webrtc.org>
> Reviewed-by: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27554}
TBR=brandtr@webrtc.org,sakal@webrtc.org,perkj@webrtc.org
Bug: webrtc:10481
Change-Id: I2978d5c527a18e885b7845c4e53a2424e8ad5b4b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132551
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27593}
This reverts commit 7ac0d5f348f0b956089c4ed65c46e65bac125508.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Replace usage of old SetRates/SetRateAllocation methods
>
> This rather large CL replaces all relevant usage of the old
> VideoEncoder::SetRates()/SetRateAllocation() methods in WebRTC.
> API is unchanged to allow downstream projects to update without
> breakage.
>
> Bug: webrtc:10481
> Change-Id: Iab8f292ce6be6c3f5056a239d26361962b14bb38
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131949
> Commit-Queue: Erik Språng <sprang@webrtc.org>
> Reviewed-by: Per Kjellander <perkj@webrtc.org>
> Reviewed-by: Niels Moller <nisse@webrtc.org>
> Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
> Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#27554}
TBR=brandtr@webrtc.org,sakal@webrtc.org,nisse@webrtc.org,sprang@webrtc.org,perkj@webrtc.org
Change-Id: I576760b584e3f258013b0279c0c173c895bbb37e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10481
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132561
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Minyue Li <minyue@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27559}
This rather large CL replaces all relevant usage of the old
VideoEncoder::SetRates()/SetRateAllocation() methods in WebRTC.
API is unchanged to allow downstream projects to update without
breakage.
Bug: webrtc:10481
Change-Id: Iab8f292ce6be6c3f5056a239d26361962b14bb38
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131949
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27554}
This CL uses RTC_EXPORT (defined in rtc_base/system/rtc_export.h)
to mark WebRTC symbols as visible from a shared library, this doesn't
mean these symbols are part of the public API (please continue to refer
to [1] for info about what is considered public WebRTC API).
[1] - https://webrtc.googlesource.com/src/+/HEAD/native-api.md
Bug: webrtc:9419
Change-Id: Ib2c29054b2ae008f5291bd3b762a504b18534326
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/130513
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27410}
This cl deprecates the FrameType enum, and adds aliases AudioFrameType
and VideoFrameType.
After downstream usage is updated, the enums will be separated
and be moved out of common_types.h.
Bug: webrtc:6883
Change-Id: I2aaf660169da45f22574b4cbb16aea8522cc07a6
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/123184
Commit-Queue: Niels Moller <nisse@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27011}
This quality boost means that we sometimes drop a _lot_ of frames in the
base layer. It also interacts poorly with the bitrate adjuster since
even if frames are dropped they are often over-sized.
The setting still leaves the current behavior as default, but can be
changed using the WebRTC-VideoRateControl field trial.
Bug: webrtc:10155
Change-Id: I1a92ec69bab61b5148fe9d8bc391ac5ee1019367
Reviewed-on: https://webrtc-review.googlesource.com/c/122840
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26659}
The lowest and highest resolution layers are also identified instead
of assuming they are the first and last ones.
Bug: webrtc:10069
Change-Id: If9c76d647415c5065b79dc71850709db6bf16f61
Reviewed-on: https://webrtc-review.googlesource.com/c/114429
Reviewed-by: Erik Språng <sprang@webrtc.org>
Commit-Queue: Florent Castelli <orphis@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26343}
Determining the EncoderInfo meta data is now done during InitEncode().
This implementation assums that no dynamic wrappers are wrapped in this
simulcast encoder adapter. Ie, if supports_native_handle changes,
InitEncode() must be called again for it to be reported properly.
Bug: webrtc:9722
Change-Id: I7901effe11e89ac011659a4ea862ab2a42577eb5
Reviewed-on: https://webrtc-review.googlesource.com/c/109620
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25549}
The SetChannelParameters function was used when WebRTC supported decoding
with errors, which we no longer do.
This cleanup CL is related to the work tracked by 9946.
Bug: webrtc:9946
Change-Id: Id2d5ed23031388f890c42651bfbe5f79eda701e5
Reviewed-on: https://webrtc-review.googlesource.com/c/108861
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Sami Kalliomäki <sakal@webrtc.org>
Commit-Queue: Philip Eliasson <philipel@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25505}
This will allow downstream projects to use it to construct their own
injected codecs without pulling in dependencies on the software codecs.
Bug: webrtc:7925
Change-Id: If8628fedd18e57a51a8b6e5baf4f63a686bf52e8
Reviewed-on: https://webrtc-review.googlesource.com/c/107027
Reviewed-by: Anders Carlsson <andersc@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Magnus Flodman <mflodman@webrtc.org>
Commit-Queue: Jonathan Yu <yujo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#25297}
* Move SimulcastEncoderAdapter out under modules/video_coding
* Move SimulcastRateAllocator back out to modules/video_coding/utility
* Move TemporalLayers and ScreenshareLayers to modules/video_coding/utility
* Move any VP8 specific code - such as temporal layer bitrate budgeting -
under codec type dependent conditionals.
* Plumb the simulcast index for H264 in the codec specific and RTP format data structures.
TBR=sprang@webrtc.org,stefan@webrtc.org,titovartem@webrtc.org
Bug: webrtc:5840
Change-Id: I2d3b130622dd7ceec5528f3ab6c46f109e6bafb8
Reviewed-on: https://webrtc-review.googlesource.com/84743
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23715}
This reverts commit 07efe436c9002e139845f62486e3ee4e29f0d85b.
Reason for revert: Breaks downstream project.
cricket::GetSimulcastConfig method signature has been updated.
I think you can get away with a default value for temporal_layers_supported (and then you can remove it after a few days when projects will be updated).
Original change's description:
> Implement H264 simulcast support and generalize SimulcastEncoderAdapter use for H264 & VP8.
>
> * Move SimulcastEncoderAdapter out under modules/video_coding
> * Move SimulcastRateAllocator back out to modules/video_coding/utility
> * Move TemporalLayers and ScreenshareLayers to modules/video_coding/utility
> * Move any VP8 specific code - such as temporal layer bitrate budgeting -
> under codec type dependent conditionals.
> * Plumb the simulcast index for H264 in the codec specific and RTP format data structures.
>
> Bug: webrtc:5840
> Change-Id: Ieced8a00e38f273c1a6cfd0f5431a87d07b8f44e
> Reviewed-on: https://webrtc-review.googlesource.com/64100
> Commit-Queue: Harald Alvestrand <hta@webrtc.org>
> Reviewed-by: Stefan Holmer <stefan@webrtc.org>
> Reviewed-by: Erik Språng <sprang@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#23705}
TBR=sprang@webrtc.org,stefan@webrtc.org,mflodman@webrtc.org,hta@webrtc.org,sergio.garcia.murillo@gmail.com,titovartem@webrtc.org,agouaillard@gmail.com
Change-Id: Ic9d3b1eeaf195bb5ec2063954421f5e77866d663
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:5840
Reviewed-on: https://webrtc-review.googlesource.com/84760
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23710}
* Move SimulcastEncoderAdapter out under modules/video_coding
* Move SimulcastRateAllocator back out to modules/video_coding/utility
* Move TemporalLayers and ScreenshareLayers to modules/video_coding/utility
* Move any VP8 specific code - such as temporal layer bitrate budgeting -
under codec type dependent conditionals.
* Plumb the simulcast index for H264 in the codec specific and RTP format data structures.
Bug: webrtc:5840
Change-Id: Ieced8a00e38f273c1a6cfd0f5431a87d07b8f44e
Reviewed-on: https://webrtc-review.googlesource.com/64100
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23705}
Experiment flag added to PeerConnectionInterface::RtcConfiguration and
propagated down to VideoStreamEncoder.
Artificial Sdp parameter is added to the sdp format if the flag is set.
Additionally, sdp format is propagated in vp8 simulcast adapters.
Bug: chromium:794608
Change-Id: I2dec54d19ae7bfbd5f2777ec682da5a84194da94
Reviewed-on: https://webrtc-review.googlesource.com/78500
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Per Kjellander <perkj@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23412}
Since the webrtc_common build target does not have visibility set, we
cannot easily use BitrateAllocation in other parts of Chromium.
This is currently blocking parts of chromium:794608, and I know of other
usage outside webrtc already, so moving it to api/ should be warranted.
Also, since there's some naming confusion and this class is video
specific rename it VideoBitrateAllocation. This also fits with the
standard interface for producing these: VideoBitrateAllocator.
Bug: chromium:794608
Change-Id: I4c0fae40f9365e860c605a76a4f67ecc9b9cf9fe
Reviewed-on: https://webrtc-review.googlesource.com/70783
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Commit-Queue: Erik Språng <sprang@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22986}
In order to eliminate the WebRTC Subtree mirror in Chromium,
WebRTC is moving the content of the src/webrtc directory up
to the src/ directory.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
TBR=tommi@webrtc.org
Bug: chromium:611808
Change-Id: Iac59c5b51b950f174119565bac87955a7994bc38
Reviewed-on: https://webrtc-review.googlesource.com/1560
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Henrik Kjellander <kjellander@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#19845}
