Add pylintrc file based on
https://code.google.com/p/chromium/codesearch#chromium/src/tools/perf/pylintrc
bit tightened up quite a bit (the one in depot_tools is far
more relaxed).
Remove a few excluded directories from pylint check and fixed/
suppressed all warnings generated.
Add GN format check + formatted all GN files using 'gn format'.
Cleanup redundant rules in tools/PRESUBMIT.py
TESTED=Ran 'git cl presubmit -vv', fixed the PyLint violations.
Ran it again with a modification in webrtc/build/webrtc.gni, formatted
all the GN files and ran it again.
R=henrika@webrtc.org, phoglund@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/50069004
Cr-Commit-Position: refs/heads/master@{#9274}
The main purpose of this CL is to clean up RTCPSender::PrepareRTCP, but
it has quite a few ramifications. Notable changes:
* Removed the rtcpPacketTypeFlags bit vector and don't assume
RTCPPacketType values have a single unique bit set. This will allow
making this an enum class once rtcp_receiver has been overhauled.
* Flags are now stored in a map that is a member of the class. This
meant we could remove some bool flags (eg send_remb_) which was
previously masked into rtcpPacketTypeFlags and then masked out again
when testing if a remb packet should be sent.
* Make all build methods, eg. BuildREMB(), have the same signature.
An RtcpContext struct was introduced for this purpose. This allowed
the use of a map from RTCPPacketType to method pointer. Instead of
18 consecutive if-statements, there is now a single loop.
The context class also allowed some simplifications in the build
methods themselves.
* A few minor simplifications and cleanups.
The next step is to gradually replace the builder methods with the
builders from the new RtcpPacket classes.
BUG=2450
R=asapersson@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/48329004
Cr-Commit-Position: refs/heads/master@{#9166}
This implementation registers RTX-APT map inside RTP sender and receiver.
While it only generates SDP with RTX associated with VP8 to make it
compatible with previous Chrome versions.
Should add following changes after reaches stable,
* Use RTX-APT map for building and restoring RTP packets.
* Add RTX support for RED or VP9 in Video engine.
* Set RTX payload type for RED inside FecConfig in EndToEndTest.
BUG=4024
R=mflodman@webrtc.org, pbos@webrtc.org, pthatcher@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36889004
Cr-Commit-Position: refs/heads/master@{#9040}
Add separate functions for returning stats from send/receive stream and updated how functions are used.
Add test implementation for histogram methods in system_wrappers/interface/metrics.h.
BUG=4519
R=pbos@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/49639004
Cr-Commit-Position: refs/heads/master@{#9009}
It is just a pass through to webrtc/video_frame.h. Updated the callers
to include webrtc/video_frame.h instead and removed i420_video_frame.h.
This should fix pbos' TODO in i420_video_frame.h.
Tested on Linux with the following command lines:
$ rm -rf out/
$ ./webrtc/build/gyp_webrtc
$ ninja -C out/Debug
BUG=None
TEST=see above
R=magjed@webrtc.org, pbos@webrtc.org, tommi@webrtc.orgTBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46819004
Patch from Thiago Farina <tfarina@chromium.org>.
Cr-Commit-Position: refs/heads/master@{#8973}
Using the single stream bwe is really bad for the screenshare
test case in particular, but would probably help in other
cases as well so enabling it by default in CallTest setup.
BUG=
R=pbos@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43089004
Cr-Commit-Position: refs/heads/master@{#8971}
CopyCodecSpecific nulls out the rtpheader pointer hence causing the crash downstream.
More details about the codec type enums:
There are 2 enums defined. webrtc::VideoCodecType webrtc::RtpCodecTypes and they don't match. Inside CopyCodecSpecific in generic_encoder.cc, it was converted from the first to the 2nd type. At that point, it'll be kRtpVideoNone (as the effect of memset to 0). kRtpVideoNone is a bad value as it could cause assert. Later, it'll be reset to kRtpVideoGeneric in RTPSender::SendOutgoingData so it's not a concern.
BUG=4511
R=pbos@webrtc.org, pthatcher@webrtc.org, stefan@webrtc.org
Committed: https://crrev.com/29b1a1c0c7c6f4b1ae4d63844b1dfaa7a72530a0
Cr-Commit-Position: refs/heads/master@{#8951}
Review URL: https://webrtc-codereview.appspot.com/47999004
Cr-Commit-Position: refs/heads/master@{#8955}
This reverts commit cf3c83e76c273309558c86fda915410f65b7a899.
Reverting EventWrapper split did not fix the issue, re-landing.
BUG=chromium:470013
TBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/49629004
Cr-Commit-Position: refs/heads/master@{#8946}
This reverts commit 9509fbfc301dd5412804ce5731afedc81480f2f8.
This is to debug a Chromium issue that WebRTC hangs if there is > 1 PeerConnection active in the browser on Win XP.
BUG=
TBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43019004
Cr-Commit-Position: refs/heads/master@{#8912}
I'm splitting the timer functions in EventWrapper into a separate interface.
- Users of the timer functions have different needs than users of a generic event
- Providing a default implementation for EventWrapper that simply uses rtc::Event.
This means that clients of WebRTC that don't use the relatively few classes, typically rendering classes, that depend on the event timer functionality, also don't pull in dependencies on multimedia timers.
R=mflodman@webrtc.org, mflodman
BUG=
Review URL: https://webrtc-codereview.appspot.com/48599004
Cr-Commit-Position: refs/heads/master@{#8833}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8833 4adac7df-926f-26a2-2b94-8c16560cd09d
Original cl description:
This removes the none const pointer entry and SwapFrame.
Since frames delivered using VideoSendStream no longer use the external capture module, VideoSendStream will not get an incoming framerate callback. VideoSendStream now uses a rtc::RateTracker.
Also, the video engine must ensure that time stamps are always increasing.
With this, time stamps (ntp, render_time and rtp timestamps ) are checked and set in ViECapturer::OnIncomingCapturedFrame
This cl was previously reverted in https://webrtc-codereview.appspot.com/46549004/.
Patchset 1 contains the original patch after rebase.
Patshet 2 fix webrtc_perf_tests reported in chromium:465306
Note that chromium:465287 is being fixed in https://webrtc-codereview.appspot.com/43829004/
BUG=1128
R=magjed@webrtc.org, mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47629004
Cr-Commit-Position: refs/heads/master@{#8776}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8776 4adac7df-926f-26a2-2b94-8c16560cd09d
Removes ThreadPosix::InitParams and a corresponding wait for an event.
This unblocks ThreadPosix::Start which had to wait for thread scheduling
for an event to trigger on the spawned thread, giving faster Start()
calls.
BUG=4413
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43699004
Cr-Commit-Position: refs/heads/master@{#8709}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8709 4adac7df-926f-26a2-2b94-8c16560cd09d
This removes the none const pointer entry and SwapFrame.
Since frames delivered using VideoSendStream no longer use the external capture module, VideoSendStream will not get an incoming framerate callback. VideoSendStream now uses a rtc::RateTracker.
Also, the video engine must ensure that time stamps are always increasing.
With this, time stamps (ntp, render_time and rtp timestamps ) are checked and set in ViECapturer::OnIncomingCapturedFrame
BUG=1128
R=magjed@webrtc.org, mflodman@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46429004
Cr-Commit-Position: refs/heads/master@{#8633}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8633 4adac7df-926f-26a2-2b94-8c16560cd09d
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
This is useful for debugging h264 input when we don't have an h264 decoder, as the resulting file should be possible to play back using mplayer. It is also often convenient to dump rtp packets in an interleaved format where the size of a packet is inserted before the actual payload.
R=pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42139004
Cr-Commit-Position: refs/heads/master@{#8558}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8558 4adac7df-926f-26a2-2b94-8c16560cd09d
Mostly, it's about moving constructors and descructors to the .cc
files, so that they won't be inlined everywhere.
The reason this CL is so big is that a lot of code was using
common_types.h without declaring a dependency on webrtc_common, which
broke the build once common_types.h started to depend on
common_types.cc.
BUG=163
R=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/26089004
Cr-Commit-Position: refs/heads/master@{#8516}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8516 4adac7df-926f-26a2-2b94-8c16560cd09d
* Move constants into the files/functions that use them
* Declare variables in the narrowest scope possible
* Use correct (expected, actual) order for gtest macros
* Remove unused functions
* Untabify
* 80-column limit
* Avoid C-style casts
* Prefer true typed constants to "enum hack" constants
* Print size_t using the right format macro
* Shorten and simplify code
* Other random cleanup bits and style fixes
BUG=none
TEST=none
R=henrik.lundin@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36179004
Cr-Commit-Position: refs/heads/master@{#8467}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8467 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL performs the following renames of targets to
make GYP and GN more unified and make the targets that
have the same name as the module and include the external
render/capture implementation (the internal one is only
used by WebRTC tests).
This makes it natural to declare dependencies in GN
without having to specify the target.
Summary of the renames:
GYP:
video_render_module_impl -> video_render (new target)
video_capture_module_impl -> video_capture (new target)
GN:
video_capture -> video_capture_module (now identical to the GYP target)
video_capture_impl -> video_capture
video_render -> video_render_module (now identical to the GYP target)
video_render_impl -> video_render
BUG=456815
R=andresp@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/35099004
Cr-Commit-Position: refs/heads/master@{#8323}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8323 4adac7df-926f-26a2-2b94-8c16560cd09d
Removes AddRenderCallback from ViERenderer and implements
VideoReceiveStream on top of DeliverI420Frame like WebRtcVideoEngine
currently does today.
Also adds ::IsTextureSupported() to the VideoRenderer interface to
permit querying whether an external renderer supports texture rendering.
R=stefan@webrtc.orgTBR=mflodman@webrtc.org
BUG=1667
Review URL: https://webrtc-codereview.appspot.com/34169004
Cr-Commit-Position: refs/heads/master@{#8299}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8299 4adac7df-926f-26a2-2b94-8c16560cd09d
This fixes a two year old TODO of deleting dead code :)
In cases where the _id or id_ member variable is being used for tracing,
I changed the member to at least be const.
It doesn't look like id's are that useful anymore so maybe the next step is to get rid of them.
BUG=
R=henrika@webrtc.org, perkj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37849004
Cr-Commit-Position: refs/heads/master@{#8201}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8201 4adac7df-926f-26a2-2b94-8c16560cd09d
This fixes a variety of MSVC warnings about value truncations when implicitly
storing the 64-bit values we get back from e.g. TimeTicks in 32-bit objects, and
removes the need for a number of explicit casts.
This also moves a number of constants so they're declared right where they're used, which is easier to read and maintain, and makes some of them of integral type rather than using the "enum hack".
BUG=chromium:81439
TEST=none
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/33649004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7905 4adac7df-926f-26a2-2b94-8c16560cd09d
