This CL implements a new unit test. The test is designed to trigger
a problem in ACM where switching the desired output frequency creates
a short discontinuity in the output audio. The problem itself is not
solved in this CL, but the failing test is disabled for now.
BUG=3919
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/23019004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7443 4adac7df-926f-26a2-2b94-8c16560cd09d
Before this change it could happen that a large jump in timestamp (a
jump not correlated to wall-clock change) caused the audio to go silent
without recovering. The reason was that all incoming packets after the
jump were considered too old compared to the last decoded packet, and
were deleted. With CL changes two things:
1. If the only available packet in the buffer is an old packet, NetEq
will do Expand instead of immediate reset. This is to avoid that one
late packet triggers a reset.
2. Old packets are discarded only when the decision to decode a packet
has been taken. This is to allow the buffer to grow and eventually
flush if no decodable packet has been found for some time.
This CL also includes a new unit test for this situation.
BUG=3785
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/22709004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7255 4adac7df-926f-26a2-2b94-8c16560cd09d
RTPStream, and NetEq as such. Also mark all other virtual overrides in the same
files.
This will make further changes to these classes safer by ensuring that the
compile breaks if the base class changes and not all overrides are fixed.
This also deletes ACMTest.cc, which existed solely to define ~ACMTest(), which
was marked pure virtual in the header. (Pure virtual destructors still need a
definition.) Because there is another pure virtual method in this class, the
class is already abstract, so there's no benefit to making the desturctor pure.
Making it non-pure allows removing the separate source file.
BUG=none
TEST=none
R=henrik.lundin@webrtc.org, niklas.enbom@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/29389004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7144 4adac7df-926f-26a2-2b94-8c16560cd09d
This reverts selected parts of r7014 to enable
rolling WebRTC in Chromium DEPS.
This works around the problem with GYP includes
being processed in the first pass (i.e. variables
cannot be used for paths). Using a dependency with
a path using a variable that is conditioned for
build_with_chromium being 0 or 1 solves the Chromium
build.
These changes will be restored once I've finished
a major GYP refactoring that will break out all
test related code (at least the parts that includes
the Android APK targets) into a separate chain
of GYP targets that are not processed when generating
projects for Chromium (which is why r7014 is breaking
the Chromium build).
BUG=3741
TESTED=Passing compilation of standalone using:
GYP_DEFINES="OS=android component=static_library fastbuild=1 target_arch=arm" webrtc/build/gyp_webrtc
ninja -C out/Debug
Then verified the *_apk targets are generated and compiled.
Passing compilation from a Chromium checkout with third_party/webrtc
directory removed and a new empty third_party/webrtc mapped to the
standalone checkout using:
sudo mount --bind /path/to/trunk/webrtc third_party/webrtc
Then running build/gyp_chromium
I also verified WebRTC GYP targets exist and are able to compile.
R=henrike@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20299004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7040 4adac7df-926f-26a2-2b94-8c16560cd09d
Restructure how the Android APK tests are compiled now
that we have a Chromium checkout available (since r6938).
This removes the need of several hacks that were needed when
building these targets from inside a Chromium checkout.
By creating a symlink to Chromium's base we can compile the required
targets. This also removes the need of the previously precompiled
binaries we keep in /deps/tools/android at Google code.
All the user needs to do is to add the target_os = ["android"]
entry to his .gclient as described at
https://code.google.com/p/chromium/wiki/AndroidBuildInstructions
Before committing this CL, the Android APK buildbots will need
to be updated.
This also solves http://crbug.com/402594 since the apply_svn_patch.py
usage will be similar to the other standalone bots.
It also solves http://crbug.com/399297
BUG=chromium:399297, chromium:402594
TESTED=Locally compiled all APK targets by running:
GYP_DEFINES="OS=android include_tests=1 enable_tracing=1" gclient runhooks
ninja -C out/Release
checkdeps
R=henrike@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/22149004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7014 4adac7df-926f-26a2-2b94-8c16560cd09d
This test has been failing every now and then. This is likely due to the
random input that was used. With this change, the input is now read from
an audio file, making it identical on each run.
The encoding is moved to inside the main test loop, so that new data is
added with each packet. (Before this change, the same payload was added
over and over again; only the RTP header was updated.)
BUG=3715
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/19079004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6948 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL turns the background noise generation in NetEq off by default. The noise generation used to kick in during long-duration packet losses, when there was no point in extrapolating the latest audio any longer. However, this sometimes produces annoying noise in situations where silence would have been preferable.
With this change, a long packet-loss concealment will be faded out to zeros instead of a low noise.
Reference files are updated where needed.
BUG=3519
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20109004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6882 4adac7df-926f-26a2-2b94-8c16560cd09d
This change replaces the old NETEQTEST_RTPpacket and
NETEQTEST_DummyRTPpacket with the new test::Packet class. Note that the
Packet class automatically handles "dummy" packets (i.e., packets for
which only the header and a length field was stored to file)
automatically. There is no need to explicitly signal this to the
application any longer. The RTP input file is now handled as a
test::PacketSource object.
Also adding a new ConvertHeader method to the Packet class. This is
needed to extract the header information as an alternative data type.
Finally, some dead code was deleted from rtp_analyze.cc (unrelated to
the reset of this change).
BUG=2692
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/21139004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6862 4adac7df-926f-26a2-2b94-8c16560cd09d
This change prepares for switching default background noise (bgn) mode
from on to off. The actual switch will be done later.
In this change, the bgn mode is included as a setting in NetEq's config
struct. We're also removing the connection between playout modes and
bgn modes in ACM. In practice this means that bgn mode will change from
off to on for streaming mode, but since the playout modes are not used
it does not matter.
BUG=3519
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/21749004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6843 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL introduces a bit-exactness test for the receive-side of the
AudioCoding Module. The main part of the test is done in the helper
class AcmReceiveTest. The test is executed from the test fixture
AcmReceiverBitExactness.
The test inserts packets from a pre-encoded RTP file. The output is
summed up into a checksum, which is verified versus a reference at the
end of the test. Alternatively, if the flag --generate_output is given,
the output is written to a file for subjective verification.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/13769004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6549 4adac7df-926f-26a2-2b94-8c16560cd09d
Rolling to this new Chromium revision required us to introduce
a sanitizer_options similar to the one in Chromium's base
(see https://code.google.com/p/chromium/codesearch#chromium/src/base/base.gyp&l=977
and https://codereview.chromium.org/238123003) in order
to get the same defaults for ASan and LSan. Without it
compilation will break since LeakSanitizer (LSan) is enabled by
default in Clang r209387 that is pulled with this roll.
I setup so that we pull in the sanitizer_options.cc and
tsan_suppressions.cc files using DEPS, so we don't have to maintain
them separately for now. We can still use our own TSan suppressions.txt
file as we do today with no changes needed.
This roll also brings in http://crrev.com/276676 so we can enable
GN build for WebRTC.
Overview of changes in Chrome DEPS:
$ svn diff http://src.chromium.org/chrome/trunk/src/DEPS -r 272489:277350
which can be compared with the output of:
$ svn cat http://webrtc.googlecode.com/svn/trunk/DEPS | grep chromium_deps | sed 's/^ *//' | sort | uniq
in a WebRTC checkout, gives the following relevant changes:
* third_party/android_tools 6fc0e1:c6e658
* third_party/libjpeg_turbo 263594:272637
* third_party/libyuv 1000:1007
* third_party/nss 271760:277057
* tools/gyp 1921:1927
* tools/swarming_client ae8085:aea506
The following also shows that Clang is upgraded from r206824 to r209387:
$ svn diff http://src.chromium.org/chrome/trunk/src/tools/clang/scripts/update.sh -r 272489:277350
BUG=3441
TEST=Trybots are not passing since after the recipe switch, SVN-based try jobs doesn't seem to support auto-detecting that a sync is needed if there's a DEPS change.
R=andrew@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12729004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6516 4adac7df-926f-26a2-2b94-8c16560cd09d
The AudioSink interface is supposed to be used by tests that produce
audio output. Two implementation classes are also provided:
OutputAudioFile: Writes the audio to a pcm file.
AudioChecksum: Calculates the MD5 checksum of the audio.
These will both be used in future changes.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/17729004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6490 4adac7df-926f-26a2-2b94-8c16560cd09d
The NextPacket method should now return NULL when the end of the
source was reached. In the RtpFileSource, this means that when
the end of file is reached, NULL is returned. Also, when an RTCP
packet is encountered, the next packet will be read from file
immediately.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/20699004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6479 4adac7df-926f-26a2-2b94-8c16560cd09d
