I used a command like this to update the paths:
perl -pi -e "s/webrtc\/base/webrtc\/rtc_base/g" `find webrtc/rtc_base -name "*.cc" -o -name "*.h"`
The only manual edit is to add an include of webrtc/rtc_base/checks.h in
webrtc/modules/audio_device/android/opensles_common.h, which likely
was needed due to changed include paths due to 'git cl format'.
BUG=webrtc:7634
NOTRY=True
NOPRESUBMIT=True
Review-Url: https://codereview.webrtc.org/2969653002
Cr-Commit-Position: refs/heads/master@{#18871}
Timing information is gathered in EncodedImage,
starting at encoders. Then it's sent using RTP header extension. In the
end, it's gathered at the GenericDecoder. Actual reporting and tests
will be in the next CLs.
BUG=webrtc:7594
Review-Url: https://codereview.webrtc.org/2911193002
Cr-Commit-Position: refs/heads/master@{#18659}
Finally we are able to remove this class entirely, along with the last
vestiges of it's use. I've also removed some legacy files that were only
used for windows XP support.
BUG=webrtc:7035
Review-Url: https://codereview.webrtc.org/2790533002
Cr-Commit-Position: refs/heads/master@{#17480}
This is yet another reland of https://codereview.webrtc.org/2434073003/
including two fixes:
1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that.
2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams.
Please review only the changes after patch set 1.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2510583002 .
Cr-Commit-Position: refs/heads/master@{#15105}
Reason for revert:
Seems to be causing flakiness in perf test:
FullStackTest.ScreenshareSlidesVP8_2TL_LossyNet
Original issue's description:
> Reland of Issue 2434073003: Extract bitrate allocation ...
>
> This is a reland of https://codereview.webrtc.org/2434073003/ including
> some fixes for failing test cases.
>
> Original description:
>
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/647bf43dcb2fd16fccf276bd94dc4400728bb405
> Cr-Commit-Position: refs/heads/master@{#15023}
TBR=mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2491393002
Cr-Commit-Position: refs/heads/master@{#15026}
This is a reland of https://codereview.webrtc.org/2434073003/ including
some fixes for failing test cases.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2488833004
Cr-Commit-Position: refs/heads/master@{#15023}
Reason for revert:
Breaks perf tests.
Original issue's description:
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/8f46c679d24a05b3f08e02c6d91ec9637f34e24f
> Cr-Commit-Position: refs/heads/master@{#14998}
TBR=stefan@webrtc.org,perkj@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2489843002
Cr-Commit-Position: refs/heads/master@{#15001}
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2434073003
Cr-Commit-Position: refs/heads/master@{#14998}
When the target bitrate is zero, currently VideoSendStream.Stats.target_media_bitrate_bps show the last set rate before the target was set to zero.
BUG=webrtc::5687 b/29574845
Review-Url: https://codereview.webrtc.org/2122743003
Cr-Commit-Position: refs/heads/master@{#13386}
Permits CHECKing/DCHECKing that methods are being accessed in a
thread-safe manner, even if they are not used by one single thread
(thread pools such as VideoToolbox OK).
BUG=
R=danilchap@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/2097403002 .
Cr-Commit-Position: refs/heads/master@{#13358}
And move encoder name cb to VCMSendStatisticsCallback.
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/1900193004
Cr-Commit-Position: refs/heads/master@{#12596}
Framerate-reduction code is disabled on all platforms, and this code
adds complexity. It's necessary to react fast, especially on mobile
platforms or other bad network conditions and framerate reduction adds
another step between HD and QVGA.
BUG=webrtc:5678, webrtc:5830
R=jackychen@webrtc.org, mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1885893002 .
Cr-Commit-Position: refs/heads/master@{#12503}
Reason for revert:
A fix is being prepared downstream so this can now go in.
Original issue's description:
> Revert of Deprecate VCMPacketizationCallback::SendData and use EncodedImageCallback instead. (patchset #5 id:80001 of https://codereview.webrtc.org/1897233002/ )
>
> Reason for revert:
> API changes broke downstream.
>
> Original issue's description:
> > Deprecate VCMPacketizationCallback::SendData and use EncodedImageCallback instead.
> > EncodedImageCallback is used by all encoder implementations and seems to be what we should try to use in the transport.
> > EncodedImageCallback can of course be cleaned up in the future.
> >
> > This moves creation of RTPVideoHeader from the GenericEncoder to the PayLoadRouter.
> >
> > BUG=webrtc::5687
> >
> > Committed: https://crrev.com/f5d55aaecdc39e9cc66eb6e87614f04afe28f6eb
> > Cr-Commit-Position: refs/heads/master@{#12436}
>
> TBR=stefan@webrtc.org,pbos@webrtc.org,perkj@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:5687
>
> Committed: https://crrev.com/a261e6136655af33f283eda8e60a6dd93dd746a4
> Cr-Commit-Position: refs/heads/master@{#12441}
TBR=stefan@webrtc.org,pbos@webrtc.org,perkj@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5687
Review URL: https://codereview.webrtc.org/1905583002
Cr-Commit-Position: refs/heads/master@{#12442}
Reason for revert:
API changes broke downstream.
Original issue's description:
> Deprecate VCMPacketizationCallback::SendData and use EncodedImageCallback instead.
> EncodedImageCallback is used by all encoder implementations and seems to be what we should try to use in the transport.
> EncodedImageCallback can of course be cleaned up in the future.
>
> This moves creation of RTPVideoHeader from the GenericEncoder to the PayLoadRouter.
>
> BUG=webrtc::5687
>
> Committed: https://crrev.com/f5d55aaecdc39e9cc66eb6e87614f04afe28f6eb
> Cr-Commit-Position: refs/heads/master@{#12436}
TBR=stefan@webrtc.org,pbos@webrtc.org,perkj@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc::5687
Review URL: https://codereview.webrtc.org/1903193002
Cr-Commit-Position: refs/heads/master@{#12441}
EncodedImageCallback is used by all encoder implementations and seems to be what we should try to use in the transport.
EncodedImageCallback can of course be cleaned up in the future.
This moves creation of RTPVideoHeader from the GenericEncoder to the PayLoadRouter.
BUG=webrtc::5687
Review URL: https://codereview.webrtc.org/1897233002
Cr-Commit-Position: refs/heads/master@{#12436}
This fix a potential race where the rotation information of a sent frame does not match the encoded frame.
BUG=webrtc:5783
TEST= Run ApprtcDemo on IOs and Android with and without capture to texture and both VP8 and H264.
R=magjed@webrtc.org, pbos@webrtc.org, tkchin@webrtc.org
TBR=tkchin_webrtc // For IOS changes.
Review URL: https://codereview.webrtc.org/1886113003 .
Cr-Commit-Position: refs/heads/master@{#12426}
Also refactor GenericEncoder to use these file writers, and remove use
of preprocessor to enable file writing.
BUG=
Review URL: https://codereview.webrtc.org/1853813002
Cr-Commit-Position: refs/heads/master@{#12372}
The main purpose was the interface-> include rename, but other files
were also moved, eliminating the "main" dir.
To avoid breaking downstream, the "interface" directories were copied
into a new "video_coding/include" dir. The old headers got pragma
warnings added about deprecation (a very short deprecation since I plan
to remove them as soon downstream is updated).
Other files also moved:
video_coding/main/source -> video_coding
video_coding/main/test -> video_coding/test
BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417283007 .
Cr-Commit-Position: refs/heads/master@{#10694}
